Introduce ATA_CAM kernel option, turning ata(4) controller drivers into
cam(4) interface modules. When enabled, this option deprecates all ata(4)
peripheral drivers (ad, acd, ...) and interfaces and allows cam(4) drivers
(ada, cd, ...) and interfaces to be natively used instead.
As side effect of this, ata(4) mode setting code was completely rewritten
to make controller API more strict and permit above change. While doing
this, SATA revision was separated from PATA mode. It allows DMA-incapable
SATA devices to operate and makes hw.ata.(ata|atapi)_dma tunable work again.
Also allow ata(4) controller drivers (except some specific or broken ones)
to handle larger data transfers. Previous constraint of 64K was artificial
and is not really required by PCI ATA BM specification or hardware.
Submitted by: nwitehorn (powerpc part)
Limit maximum I/O size, depending on command set supported by device.
It is required to suppot non-LBA48 devices with MAXPHYS above 128K.
Same is done in ada(4).
Add counters for the i7 architecture which were accidentally left
out of the original commit of i7 support. These are all the counters
on pages A-32 and A-33 of the _Intel(R) 64 and IA32 Architectures
Software Developer's Manual Vol 3B_, June 2009. Almost all
of these counters relate to operations on the L2 cache.
r200124:
Avoid using additional variable for storing an error if we are not going
to do anything with it.
r200126:
Fix deadlock when ZVOLs are present and we are replacing dead component or
calling scrub when pool is in a degraded state. It will try to taste ZVOLs,
which will lead to deadlock, as ZVOL will try to acquire the same locks as
replace/scrub is holding already.
We can't simply skip provider based on their GEOM class, because ZVOL can have
providers build on top of it and we need to skip those as well.
We do it by asking for ZFS::iszvol attribute. Any ZVOL-based provider will give
us positive answer and we have to skip those providers.
This way we remove possibility to create ZFS pools on top of ZVOLs, but it is
not very useful anyway.
I believe deadlock is still possible in some very complex situations like when
we have MD provider on top of UFS file on top of ZVOL. When we try to replace
dead component in the pool mentioned ZVOL is based on, there might be a
deadlock when ZFS will try to taste MD provider. There is no easy way to detect
that, but it isn't very common.
r200125,r200158:
Fix order of looking for providers.
Before r200125 the order of looking for providers was wrong. It was:
1. Find provider by name.
2. Find provider by guid.
3. Find provider by name and guid.
Where it should have been:
1. Find provider by name and guid.
2. Find provider by guid.
3. Find provider by name.
Improve support for High-speed USB audio devices.
- fix issues regarding the mixer, where the interface number was not set in
time.
- fix wrong use of resolution parameter.
Submitted by: Hans Petter Selasky
Remove overuse of exclamation marks in kernel printfs, there mere fact a
message has been printed is enough to get someones attention. Also remove the
line number for DPRINTF/DPRINTFN, it already prints the funtion name and a
unique message.
Disable interrupts after doing early takeover of the usb controller in case usb
isnt actually compiled in (or kldloaded) as the controller could cause spurious
interrupts.
Improve High Speed slot allocation mechanism by moving the computation to the
endpoint rather than per xfer and provide functions around get/free of resources.
Submitted by: Hans Petter Selasky
ehci_init() will do reset and set the usbrev flag. Fix problem where
ehci_reset() was called before ehci_init().
PR: usb/140242
Submitted by: Sebastian Huber
- Add usb_fill_bulk_urb() and usb_bulk_msg() linux compat functions [1]
- Don't write actual length if the actual length pointer is NULL [2]
- correct Linux Compatibility error codes for short isochronous IN transfers
and make status field signed.
Submitted by: Leunam Elebek [1], Manuel Gebele [2]
updates device entries supported with the product name not magic numbers
and sorts entries. WUSB54GCV2 is added.
overhauls urtw(4) for supporting RTL8187B devices properly that there
was major changes to initialize RF chipset and set H/W registers and
removed a lot of magic numbers on code.
Reduce probe priority of USB input devices to BUS_PROBE_GENERIC from
BUS_PROBE_SPECIFIC. This allows device-specific drivers like atp to
attach reliably.
Do not ignore device interrupt if bus mastering is still active. It is
normal in case of media read error and some ATAPI cases, when transfer size
is unknown beforehand. PCI ATA BM specification tells that in case of such
underrun driver should just manually stop DMA engine. DMA engine should
same time guarantie that all bus mastering transfers completed at the moment
of driver reads interrupt flag asserted.
This change fixes interrupt storms and command timeouts in many cases.
PR: kern/103602, sparc64/121539, kern/133122, kern/139654
On Soft Reset, read device signature from FIS receive area, instead of
PxSIG register. It works better for NVidia chipsets. ahci(4) does the same.
PR: kern/140472, i386/138668
Explicitly acknowledge MSI completion, as required by SiI3124 datasheet.
It makes MSI working there. Later (and cheaper) PCIe chips (3132/3531)
still randomly crashing system in few seconds of high MSI rates, generating
something inaporopriate, like NMI or "Fatal trap 30".
Add Asynchronous Notification support for controllers without SNTF
capability by snooping SDB FIS receive area. It should be even faster
then regular way, but less reliable.
Change 'load' balancing mode algorithm:
- Instead of measuring last request execution time for each drive and
choosing one with smallest time, use averaged number of requests, running
on each drive. This information is more accurate and timely. It allows to
distribute load between drives in more even and predictable way.
- For each drive track offset of the last submitted request. If new request
offset matches previous one or close for some drive, prefer that drive.
It allows to significantly speedup simultaneous sequential reads.
PR: kern/113885
Modify the experimental nfs server so that it falls back to
using VOP_LOOKUP() when VFS_VGET() returns EOPNOTSUPP in the
ReaddirPlus RPC. This patch is based upon one by pjd@ for the
regular nfs server which has not yet been committed. It is needed
when a ZFS volume is exported and ReaddirPlus (which almost
always happens for NFSv4) is performed by a client. The patch
also simplifies vnode lock handling somewhat.
Tested by: gerrit at pmp.uni-hannover.de
Patch the experimental NFS server is a manner analagous to
r197525, so that the creation verifier is handled correctly
in va_atime for 64bit architectures. There were two problems.
One was that the code incorrectly assumed that
sizeof (struct timespec) == 8 and the other was that the tv_sec
field needs to be assigned from a signed 32bit integer, so that
sign extension occurs on 64bit architectures. This is required
for correct operation when exporting ZFS volumes.
Tested by: gerrit at pmp.uni-hannover.de
Reviewed by: pjd
