This adds the PT_GETREGSET and PT_SETREGSET ptrace types. These can be
used to access all the registers from a specified core dump note type.
The NT_PRSTATUS and NT_FPREGSET notes are initially supported. Other
machine-dependant types are expected to be added in the future.
The ptrace addr points to a struct iovec pointing at memory to hold the
registers along with its length. On success the length in the iovec is
updated to tell userspace the actual length the kernel wrote or, if the
base address is NULL, the length the kernel would have written.
Because the data field is an int the arguments are backwards when
compared to the Linux PTRACE_GETREGSET call.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19831
I observed a situation where some read requests failed when a 2-way geom
mirror lost one disk. The problem appears to be in the logic that skips
retrying a failed request when a mirror has only one active disk.
Generally, that makes sense. But during a transition from two disks to
one it is possible that the request failed on the failing disk before it
was inactivated and, so, the remaining active disk is the disk that
should be tried.
This change adds an additional check to ensure that it was the (only)
active disk that was already tried.
Reviewed by: mav
MFC after: 3 weeks
This fixed panic with interface being removed while packet
was sitting on a queue. This allows to pass all dummynet
tests including forthcoming dummynet:ipfw_interface_removal
and dummynet:pf_interface_removal and demonstrates use of
m_rcvif_serialize() and m_rcvif_restore().
Reviewed by: kp
Differential revision: https://reviews.freebsd.org/D33267
Supplement ifindex table with generation count and use it to
serialize & restore an ifnet pointer.
Reviewed by: kp
Differential revision: https://reviews.freebsd.org/D33266
Fun note: git show e6abef0918
Now that ifindex is static to if.c we can unvirtualize it. For lifetime
of an ifnet its index never changes. To avoid leaking foreign interfaces
the net.link.generic.system.ifcount sysctl and the ifnet_byindex() KPI
filter their returned value on curvnet. Since if_vmove() no longer
changes the if_index, inline ifindex_alloc() and ifindex_free() into
if_alloc() and if_free() respectively.
API wise the only change is that now minimum interface index can be
greater than 1. The holes in interface indexes were always allowed.
Reviewed by: kp
Differential revision: https://reviews.freebsd.org/D33672
The manpage has contained the following verbiage on the matter for just
under 31 years:
"At least one argument must be present in the array"
Previous to this version, it had been prefaced with the weakening phrase
"By convention."
Carry through and document it the rest of the way. Allowing argc == 0
has been a source of security issues in the past, and it's hard to
imagine a valid use-case for allowing it. Toss back EINVAL if we ended
up not copying in any args for *execve().
The manpage change can be considered "Obtained from: OpenBSD"
Reviewed by: emaste, kib, markj (all previous version)
Differential Revision: https://reviews.freebsd.org/D34045
First open locking changes were correctly applied to zvol_geom_open but
incorrectly applied to zvol_cdev_open, causing spa_namespace_lock to be
held indefinitely.
Make the first open locking in zvol_cdev_open match zvol_geom_open.
This change has been accepted upstream in openzfs/zfs#13016 but is not
yet merged.
Reviewed by: mav
Fixes: e92ffd9b62
Sponsored by: iXsystems, Inc.
As documented in the HiFive Unmatched Software Reference Manual.
Reviewed by: imp, mhorne
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34010
This function will be used by coming TLS hardware receive offload support.
Differential Revision: https://reviews.freebsd.org/D32356
Discussed with: jhb@
MFC after: 1 week
Sponsored by: NVIDIA Networking
Although send tags are strictly used for transmit, the name might be changed
in the future to be more generic.
The TLS receive tags support regular IPv4 and IPv6 traffic, and also over any
VLAN. If prio-tagging is enabled, VLAN ID zero, this must be checked in the
network driver itself when creating the TLS RX decryption offload filter.
TLS receive tags have a modify callback to tell the network driver about
the progress of decryption. Currently decryption is done IP packet by IP
packet, even if the IP packet contains a partial TLS record. The modify
callback allows the network driver to keep track of TCP sequence numbers
pointing to the beginning of TLS records after TCP packet reassembly.
These callbacks only happen when encrypted or partially decrypted data is
received and are used to verify the decryptions starting point for the
hardware. Typically the hardware will guess where TLS headers start and
needs help from the software to know if the guess was correct. This is
the purpose of the modify callback.
Differential Revision: https://reviews.freebsd.org/D32356
Discussed with: jhb@
MFC after: 1 week
Sponsored by: NVIDIA Networking
TCP_BBR:
- Fix a typo introducted in 1b90dfa5d2, which was reported by tuexen@
TCP_RACK:
- Correct two sysctl descriptions: s/corret/correct/
tcp_bbr(4): Also fix s/measurment/measurement/ in the man page
MFC after: 1 week
There's a small race in freezing the simq when performing a diagnostic
reset. During this time, a transaction can slip through and encounter
the target id of 0. If we're still in diagnostic reset when we detect
this, return a CAM_DEVICE_NOT_THERE status. Instead, freeze the queue
and return a requeue status, similar to what we do when we're resetting
a target and a transaction get here. The race is unavoidable due to
separate locks for queue and SIM, but easy enough to detect and make
harmless.
Sponsored by: Netflix
Reviewed by: scottl, mav
Differential Revision: https://reviews.freebsd.org/D34017
Add i2c support to linuxkpi. This is needed by drm-kmod.
For every i2c_adapter added by i2c_add_adapter we add a child to the
device named "lkpi_iic". This child handle the conversion between
Linux i2c_msgs to FreeBSD iic_msgs.
For every i2c_adapter added by i2c_bit_add_bus we add a child to the
device named "lkpi_iicbb". This child handle the conversion between
Linux i2c_msgs to FreeBSD iic_msgs.
With the help of iic(4), this expose the i2c controller to userspace
allowing a user to query DDC information from a monitor.
e.g.: i2c -f /dev/iic0 -a 0x28 -c 128 -d r
will query the standard EDID from the monitor if plugged.
The bitbang part (lkpi_iicbb) isn't tested at all for now as I don't have
compatible hardware (all my hardware have native i2c controller).
Tested on: Intel (SandyBridge, Skylake, ApolloLake)
Tested on: AMD (Picasso, Polaris (amd64 and arm64))
MFC after: 1 month
Reviewed by: hselasky
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33053
Don't emit warnings; this isn't any different from a Linux kernel
built without OPTIONS_SECCOMP, so the userspace already needs to know
how to deal with it. This is also similar with how we handle seccomp
in linux_prctl().
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D33808
Try to live with cruel reality fact - if_vmove doesn't move an
interface from previous vnet cloning infrastructure to the new
one. Let's admit this as design feature and make it work better.
* Delete two blocks of code that would fallback to vnet0, if a
cloner isn't found. They didn't do any good job and also whole
idea of treating vnet0 as special one is wrong.
* When deleting a cloned interface, lookup its cloner using it's
home vnet.
With this change simple sequence works correctly:
ifconfig foo0 create
jail -c name=jj persist vnet vnet.interface=foo0
jexec jj ifconfig foo0 destroy
Differential revision: https://reviews.freebsd.org/D33942
* Do a single call into if_clone.c instead of two. The cloner
can't disappear since the interface sits on its list.
* Make restoration smarter - check that cloner with same name
exists in the new vnet.
Differential revision: https://reviews.freebsd.org/D33941
When sending an NS, check if we are using a IPv6 CARP address
and if we do, then put proper CARP link level address into
ND_OPT_SOURCE_LINKADDR option and also put PACKET_TAG_CARP tag
on the packet. The latter will enforce CARP link level address
at the data link layer too, which might be necessary for broken
implementations.
The code really follows what NA sending code has been doing since
introduction of carp(4). While here, bring to style(9) the whole
block of code.
PR: 193280
Differential revision: https://reviews.freebsd.org/D33858
This is intended to be used with forthcoming ice(4) driver version 1.34.2.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Sponsored by: Intel Corporation
Adds a new function pointer to struct if_txrx in order to allow
drivers to set their own function that will determine which queue
a packet should be sent on.
Since this includes a kernel ABI change, bump the __FreeBSD_version
as well.
(This motivation behind this is to allow the driver to examine the
UP in the VLAN tag and determine which queue to TX on based on
that, in support of HW TX traffic shaping.)
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: kbowling@, stallamr@netapp.com
Tested by: jeffrey.e.pieper@intel.com
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D31485
