"maximum number of contacts" usages.
Assume touchpad to be a clickpad if it has only internal button.
Set number of contacts to 5 for touchpads and to 10 for touchscreens.
Check for fetched report length to avoid reading of stalled data.
Fixes Dell Precision 7550 laptop.
Tested by: Shawn Webb <shawn.webb_AT_hardenedbsd_DOT_org>
PR: 257992
(cherry picked from commit 9d04336b61)
If HID usage is mapped to evdev event by hidmap item marked with this
flag than entire driver attachment is blocked.
(cherry picked from commit cded1fdb37)
In Serial mode, each packet contains information that describes a
single physical contact point. Multiple contacts are streamed
serially. In this mode, devices report all contact information in a
series of packets. The device sends a separate packet for each
concurrent contact.
Serial packet reporting mode is used by post-2014 eGalax touchscreens.
Tested by: Mark Kane <mark_AT_kane_DOT_mn>
(cherry picked from commit 0075742d18)
They are true multitouch internally but Synaptics PS/2 protocol
limitations do not all allow to export touch identificators.
(cherry picked from commit c21171af68)
Fix 2.5 and 5G speeds reporting and update shared code with recent
changes:
- Update expected FW API versions for X710 and X722 adapters
- Define pointers related to Preservation Rules Module
- Add definitions for Shadow RAM pointers to new modules: 5th and 6th
FPA, and Preservation Rules Module.
- Add I40E_RX_PTYPE_PARSER_ABORTED definition, so the driver will know
opcode for parser aborted packets.
- Add the new filter types needed for custom cloud filters.
- Add support for Minimum Rollback Revision
- Fix RX_ONLY mode for unicast promiscuous on VLAN
- Add EEE LPI status check for X722 adapters
- Fix PHY type identifiers for 2.5G and 5G adapters
- Fix update link data for X722
- Increase the timeout value for PF reset to give PF more time to finish
reset if it is loaded with filters.
- Added support for Min Rollback Revision for 4 more X722 modules
- Fix reporting of Active Optical Cable media type
- Add flags and fields for double VLAN processing
- Fix potentially uninitialized variables in NVM code
Reviewed by: kbowling@, mike.jakubik@gmail.com
Tested by: gowtham.kumar.ks@intel.com
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D31565
(cherry picked from commit abf774528d)
When link_active_on_if_down flag is disabled and link is brought down
with ifconfig, FW reports a false positive link event about an
unqualified transceiver. The condition used in the driver to filter out
those false positive events was incorrect and caused that unqualified
module event to also not be reported when the event was valid.
Change the condition to rely on IFF_UP flag instead of
link_active_on_if_down and bump driver version to 2.3.1-k.
Signed-off-by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: stallamr@netapp.com, erj@
Tested by: gowtham.kumar.ks@intel.com
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D30733
(cherry picked from commit c4622b01d2)
Add flow_control to hw.ixl tunables tree to let override
initial flow control configuration for all interfaces.
Keep using configuration set by NVM by default.
Reviewed by: erj@, gallatin@
Tested by: gowtham.kumar.ks_intel.com
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D29338
(cherry picked from commit 20a52706c8)
This reverts commit fc7682b17f.
This will be done incrementally to help with bisecting an issue in
later I21x devices (ich8lan).
PR: 258153
Approved by: imp
MFC after: 1 day
(cherry picked from commit a4378873e9)
- Some configurations, e.g. HP EliteBook 840 G3, come with a dummy card
in the card slot which is detected as a valid SD card. This added long
timeout at boot time. To alleviate the problem, the default timeout is
reduced to one second during the setup phase. [1]
- Some configurations crash at boot if rtsx(4) is defined in the kernel
config. At boot time, without a card inserted, the driver found that
a card is present and just after that a "spontaneous" interrupt is
generated showing that no card is present. To solve this problem,
DELAY(9) is set to one quarter of a second before checking card presence
during driver attach.
- As advised by adrian, taskqueue and DMA are set up sooner during
the driver attach. A heuristic to try to detect configuration needing
inversion was added.
PR: 255130 [1]
Differential Revision: https://reviews.freebsd.org/D30499
(cherry picked from commit 9d3bc16382)
Before this change driver reported IFCAP_WOL_MAGIC enabled, but not
supported. It caused errors on some SIOCSIFCAP calls. Instead
report the support if hardware supports WOL, and enabled status if
it has such filter installed on boot.
Also bnxt_wol_config() should check WOL status in if_getcapenable(),
not in if_getcapabilities() to get current one.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
(cherry picked from commit 8c14d7da5b)
In case we want to use other WD than IPMI-provided, add
sysctl to disable initialization.
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D31548
(cherry picked from commit e8ad0a0059)
The ACPI timer test was introduced in 2002 to detect an erratum in
chipsets used with Pentium II and Pentium III processors. No other
hardware is known to be affected, so on non-i386 systems it should
be safe to skip the test.
Turning off this test speeds up the FreeBSD boot process by roughly
140 ms on an EC2 c5.xlarge instance.
The previous behaviour can be restored by setting
hw.acpi.timer_test_enabled=1
in /boot/loader.conf.
Requested by: jhb, imp
Sponsored by: https://www.patreon.com/cperciva
When hw.acpi.timer_test_enabled is set to 0, this makes acpi_timer_test
return 1 without actually testing the ACPI timer; this results in the
ACPI-fast timecounter always being used rather than potentially using
ACPI-safe.
The ACPI timer testing was introduced in 2002 as a workaround for
errata in Pentium II and Pentium III chipsets, and is unlikely to be
needed in 2021.
While I'm here, add TSENTER/TSEXIT to make it easier to see the time
spent on the test (if it is enabled).
Reviewed by: allanjude, imp
MFC After: 1 week
(cherry picked from commit 3c253d03d9)
Several functions in the driver code have a weird function comment
formatting which uses two spaces instead of only one space for the main
function body.
This formatting will be mechanically fixed by sed in a future patch, but
doing so leads to some spelling warnings on that patch. Cleanup the
spelling mistakes that will be detected first. This way, it is easier to
verify the mechanical transformation done by sed in the following patch.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (fc75eee32037c1379e77e57031c1c353badd2272)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
(cherry picked from commit 46981e903c)
This patch is for restarting auto negotiation on PHY.
Signed-off-by: Jakub Chylkowski <jakubx.chylkowski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (664ea2614eafbec8eda5c86764ff047475a1e5c6)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
(cherry picked from commit 80a39a2bda)
The retry variable was being incremented before it was evaluated by the
subsequent conditional against the maximum retries to figure out which
message to print. So we'll move the increment op to the end.
Signed-off-by: Jeb Cramer <jeb.j.cramer@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (390445ec30b4c52a3d2887c3d2a202d9cf37ea8e)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
(cherry picked from commit dc11ba4eb3)
Remove unnecessary extra whitespace on all function comments, replacing
' * ' with ' * '.
This was done automatically via sed using the following transformation:
sed 's/^ \* / * /'
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (40023f73c76579e58a859dab87b4c30278eb2e48)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
(cherry picked from commit 4cdc5e12a8)
Synced to the ixgbe shared code with DPDK shared code which has local
fixes on top of "not-released-cid-ixgbe.2020.06.09.tar.gz"
Approved by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
(cherry picked from commit 8455e365f7)
The question around getting rid of the assignments seems lived
long enough, if they are not needed until now, we can drop them.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Approved by: imp
Obtained from: DPDK (a6395d471e14e5a7432875dad8fb3533238c5167)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
(cherry picked from commit 0b487fb454)
After setting up the link on x552/X557-AT 10GBASE-T NICs, sometimes the
link does not get set up properly and as a result all the subsequent
calls to ixgbe_check_link() from ixgbe_dev_link_update_share() fail.
Introduce a delay time of 1s in ixgbe_setup_mac_link_t_X550em() before
beginning to set up the external PHY link speed to ensure that the
controller can acquire the link.
Signed-off-by: Ashijeet Acharya <ashijeet.acharya@6wind.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Approved by: imp
Obtained from: DPDK (d31b95860d8e9dd7c6e242bd08baaac00a9714f0)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
(cherry picked from commit d5bbb5500c)
While sending request using ixgbe_hic_unlocked() the data field in
buffer struct is not used. It is set when the struct is overwritten by
FW to deliver the response. To not pass random data to FW the whole
structure should be zeroed before use.
Signed-off-by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Signed-off-by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (40543be5376ca415b2a7e196315d0555725b8bdf)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
(cherry picked from commit b3ebe337ff)
With the NVM image for x550em XFI will not report
the auto-negotiation feature correctly. The auto-negotiation
should be "No" for supports and advertised items.
At the same time update speed makes it support 1G and 10G.
Signed-off-by: Piotr Skajewski <piotrx.skajewski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (fb03b51da940f1d56d701776fd85a0dfc1ace098)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
(cherry picked from commit 8e9f1b239d)
As the code has changed the max wait time to 1000ms, the comment should
be changed accordingly.
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Approved by: imp
Obtained from: DPDK (73247f1ced303c16987bb366d38a2d8a0fc40db4)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
(cherry picked from commit 96ef6eb3ae)
After setting up the link on a fiber port, the maximum wait time for
the link to come up is 500 ms in ixgbe_setup_mac_link_multispeed_fiber().
On an x550 SFP+ port, this is often not sufficiently long for the link
to come up. This can result in never being able to retrieve accurate
link status for the port using rte_eth_link_get_nowait().
Increase the maximum wait time in ixgbe_setup_mac_link_multispeed_fiber()
to 1 s.
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Approved by: imp
Obtained from: DPDK (64f1c8539c8ce99214b9eb1fb728a2c6745f3300)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
(cherry picked from commit aaa3af802f)
For the "Apply Update" command the firmware does not
given an response. For this command, success should
be return.
Signed-off-by: Mateusz Kowalski <mateusz.kowalski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (03b09c71c0c6c516ce05cad8e8aa75e8b9e14fba)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
(cherry picked from commit c966c431c7)
On ESXi OS, when user disables auto negotiation, the following log
appears: "(unsupported) Flow control autoneg is disabled".
It is true that auto negotiation is disabled but it is
not necessarily true that it is not supported.
Signed-off-by: Jakub Chylkowski <jakubx.chylkowski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (ab6ac48d483ef7f906b90f45182f2ddf3254d876)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
(cherry picked from commit f511cd2258)
In some corner cases the functions ixgbe_clear_rar_generic and
ixgbe_clear_vmdq_generic may call one another leading to infinite
recursion.
When ixgbe_clear_vmdq_generic is called with IXGBE_CLEAR_VMDQ_ALL
flag, it's going to clear MPSAR registers, and proceed to call
ixgbe_clear_rar_generic, which in turn will clear the RAR registers,
and recursively call back ixgbe_clear_vmdq_generic. Normally, the
latter would detect that MPSAR registers have already been cleared
and terminate the recursion.
However, when PCIe link is down, and before the driver has had the
opportunity to shut itself down, all register reads return 0xFFFFFFFF,
and all register writes fail silently. In such case, because
ixgbe_clear_vmdq_generic blindly assumes that clearing MPSAR registers
succeeded, it's going to always call ixgbe_clear_rar_generic, which
in turn will always call back ixgbe_clear_vmdq_generic, creating
infinite recursion.
This patch re-reads MPSAR register values after they had been cleared.
In case of PCIe link failure, the values read will be non-zero, which
will terminate the recursion. On the other hand, under normal
circumstances the value read from MPSAR registers is going to be equal
to the value previously written, so this patch is expected not to cause
any regressions.
Signed-off-by: Robert Konklewski <robertx.konklewski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (2d04b9e856125197ec8e967471426d56ab7efcf0)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
(cherry picked from commit 8270b7174c)
ixgbe devices support up to 8 Rx and Tx queues per virtual function.
Currently, the registers of only seven queues are set to default when
resetting a VF.
Signed-off-by: Simon Ellmann <simon.ellmann@tum.de>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Approved by: imp
Obtained from: DPDK (d2565b347915def3a0f3c68bde6824acf096a0e6)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
(cherry picked from commit 7165504a17)
