Do not hardcode what we setup for the DMA engine configuration but
lookup the fdt properties and configuring accordingly.
Use a default value of 8 for the burst dma length for both TX and
RX, this is what we used for TX before.
- Allocate 256 handlers more than payload commands for management purposes.
- Increase maximum number of handlers from 8K to 16K by tuning the format.
- Just to be safe limit the number of payload commands to 16K - 256.
- Limit number of target exchanges in mixed mode to the number of atpds.
- If we still somehow get out of atpds -- return BUSY, since we really are.
There is not much to inherit any more, may create more problems than solve.
Instead parent them all directly to upstream.
While there, add missed payload tag and tune scratch tag destructions.
The netmap application using the driver is responsible for replenishing
the receive freelists and they may be totally depleted when the
application exits. Packets in flight, if any, might block the pipeline
in case there aren't enough buffers left in the freelist. Avoid this by
filling up the freelists with a driver allocated buffer.
MFC after: 1 week
Sponsored by: Chelsio Communications
Qlogic chips store S/G lists in the same queue as requests themselves. In
the worst case 1MB I/O may require up to 52 IOCBs, that means queue of 1024
IOCBs can store only 19 of such requests. The increase reduces chances of
overflow, while we should be able to afford additional 512KB of RAM per HBA.
The Linux driver uses comparable numbers.
While there, decouple ATIO queue size from response queue size. There is
no reason for them to be equal.
- Make isp_start() to set all the IOCB fields aside of S/G list, removing
extra information from isp_send_cmd(), now only doing S/G lists and sending.
- Turn DMA setup/free from being card and PCI-specific into OS-specific,
instead add new card-specific method for isp_send_cmd(). Previously this
function was a monster handling all the cards.
- Remove double error code translation.
This removes 288KB (36%) of the driver code and zillions of hacks and
workarounds, making single driver uniformly support several different
generations of hardware interfaces, not counting minor card variations.
After years of the hopeless fight, I don't think it worth to continue
support for hardware obsolete for 15-20 years. Instead much cleaner
now code should allow to move forward toward better locking, multiple
queues and other cool features.
All the remaining Qlogic cards starting from 4Gb 24xx to 32Gb 27xx use
the same hardware/firmware interface with minor incremental improvements,
so it seems to be a good new starting point. Except one PCI-X model all
all of them are PCIe and so still usable in modern systems.
Discussed with: ken, scottl, jpaetzel, imp
Relnotes: yes
Rudimentary AUX multiplexing support was added to kernel to make possible
touchpad initialization on some HP EliteBook laptops with trackpoint.
Disable multiplexer probing on all Lenovo laptops now as they use touchpad
pass-through port rather than AUX multiplexer to connect trackpoint and
at least two model (X120e and X121e) is known for getting PS/2 AUX port
dysfunctional after switching back to hidden multiplexing mode.
AUX MUX probing can be reenabled with setting of hw.psm.mux_disabled loader
tunable to 0.
PR: 249987
Reported by: jwb
MFC after: 2 weeks
It can useful for code outside the VM system to look up the NUMA domain
of a page backing a virtual or physical address, specifically when
creating NUMA-aware data structures. We have _vm_phys_domain() for
this, but the leading underscore implies that it's an internal function,
and vm_phys.h has dependencies on a number of other headers.
Rename vm_phys_domain() to vm_page_domain(), and _vm_phys_domain() to
vm_phys_domain(). Make the latter an inline function.
Add _vm_phys.h and define struct vm_phys_seg there so that it's easier
to use in other headers. Include it from vm_page.h so that
vm_page_domain() can be defined there.
Include machine/vmparam.h from _vm_phys.h since it depends directly on
some constants defined there.
Reviewed by: alc
Reviewed by: dougm, kib (earlier versions)
Differential Revision: https://reviews.freebsd.org/D27207
Some of the PCI ID were described as ENA with LLQ support - it's not
fully accurate and because of that, their names were changed.
Instead of LLQ, use RSERV0 for the description of those devices.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D27119
The new HAL allows the driver to read extra ENI stats. Exact meaning of
each of them can be found in base/ena_defs/ena_admin_defs.h file and
structure ena_admin_eni_stats.
Those stats are being updated inside of the timer service, which is
executed every second.
ENI metrics are turned off by default. They can be enabled, using the
sysctl node: dev.ena.X.eni_metrics.update_delay
0 value in this node means that the update is turned off. Other values
determine how many seconds must pass, before ENI metrics will be
updated.
They can be acquired, using sysctl:
sysctl dev.ena.X.eni_metrics
Where X stands for the interface number.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D27118
Refering to guide: https://wiki.freebsd.org/SPDX the SPDX tag should not
replace the standard license text, however it should be added over the
standard license text to make the automation easier.
Because of that, the old license was kept, but the SPDX tag was added
on top of every ENA driver file.
Submited by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D27117
For the first descriptor in a chain the data may start at an offset.
It is optional feature of some devices, so the driver must ack that
it supports it.
The data pointer of the mbuf is simply shifted by the given value.
Submitted by: Maciej Bielski <mba@semihalf.com>
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D27116
* Use the new API of ena_trace_*
* Fix typo syndrom --> syndrome
* Remove validation of the Rx req ID (already performed in the ena-com)
* Remove usage of deprecated ENA_ASSERT macro
Submitted by: Ido Segev <idose@amazon.com>
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D27115
The latest generation hardware requires IO CQ (completion queue)
descriptors memory to be aligned to a 4K. It needs that feature for
the best performance.
Allocating unaligned descriptors will have a big performance impact as
the packet processing in a HW won't be optimized properly. For that
purpose adjust ena_dma_alloc() to support it.
It's a critical fix, especially for the arm64 EC2 instances.
Submitted by: Ido Segev <idose@amazon.com>
Obtained from: Amazon, Inc
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D27114
Ecmd memory is not directly related to the request queue, only referenced
from it sometimes in target mode. Separate allocation should be easier
in case of fragmented memory and can be skipped when target is not built.
MFC after: 1 month
The entry->flags field is initialized in iommu_gas_init_domain().
Reviewed by: kib
Sponsored by: Innovate DSbD
Differential Revision: https://reviews.freebsd.org/D27235
This is needed on arm64 for the interface between iommu framework
and iommu controller drivers.
Reviewed by: kib
Sponsored by: Innovate DSbD
Differential Revision: https://reviews.freebsd.org/D27229
APIs that have deferred callbacks should have some kind of cleanup
function that callers can use to fence the callbacks. Otherwise things
like module unloading can lead to dangling function pointers, or worse.
The IB MR code is the only place that calls this function and had a
really poor attempt at creating this fence. Provide a good version in
the core code as future patches will add more places that need this
fence.
Linux commit:
e355477ed9e4f401e3931043df97325d38552d54
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
Report EQE data upon CQ completion to let upper layers use this data.
Linux commit:
4e0e2ea1886afe8c001971ff767f6670312a9b04
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
Enhance mlx5_core_create_cq() to get the command out buffer from the
callers to let them use the output.
Linux commit:
38164b771947be9baf06e78ffdfb650f8f3e908e
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
To prevent a hardware memory leak when a DEVX DCT object is destroyed
without calling drain DCT before, (e.g. under cleanup flow), need to
manage its creation and destruction via mlx5 core.
Linux commit:
c5ae1954c47d3fd8815bd5a592aba18702c93f33
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
Make sure order of cleanup is exactly the opposite of initialization.
Linux commit:
f4044dac63e952ac1137b6df02b233d37696e2f5
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
