Simplify the setup of srrctl.BSIZEPKT on igb class NICs.
Improve the setup of rctl.BSIZE on lem and em class NICs.
Don't try to touch rfctl on lem class NICs.
Manipulate rctl.BSEX correctly on lem and em class NICs.
Approved by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31457
The current code checks the RWX bits are 0 but does not check the V bit
is non-zero, meaning not-yet-allocated L1 entries that are still zero
are regarded as being allocated. This is likely due to copying the arm64
code that checks ATTR_DESC_MASK is L1_TABLE, which emcompasses both the
type and the validity in a single field, and erroneously translating
that to a check of just PTE_RWX being 0 to indicate non-leaf, forgetting
about the V bit. This then results in the following panic:
panic: Fatal page fault at 0xffffffc0005cf292: 0x00000000000050
cpuid = 1
time = 1628379581
KDB: stack backtrace:
db_trace_self() at db_trace_self
db_trace_self_wrapper() at db_trace_self_wrapper+0x38
kdb_backtrace() at kdb_backtrace+0x2c
vpanic() at vpanic+0x148
panic() at panic+0x2a
page_fault_handler() at page_fault_handler+0x1ba
do_trap_supervisor() at do_trap_supervisor+0x7a
cpu_exception_handler_supervisor() at
cpu_exception_handler_supervisor+0x70
--- exception 13, tval = 0x50
pmap_enter_l2() at pmap_enter_l2+0xb2
pmap_enter_object() at pmap_enter_object+0x15e
vm_map_pmap_enter() at vm_map_pmap_enter+0x228
vm_map_insert() at vm_map_insert+0x4ec
vm_map_find() at vm_map_find+0x474
vm_map_find_min() at vm_map_find_min+0x52
vm_mmap_object() at vm_mmap_object+0x1ba
vn_mmap() at vn_mmap+0xf8
kern_mmap() at kern_mmap+0x4c4
sys_mmap() at sys_mmap+0x38
do_trap_user() at do_trap_user+0x208
cpu_exception_handler_user() at cpu_exception_handler_user+0x72
--- exception 8, tval = 0x1dd
Instead, we should just check the V bit, as on amd64, and assert that
any valid L1 entries are not leaves, since an L1 leaf would render the
entire range allocated and thus we should not have attempted to map that
VA in the first place.
Reported by: David Gilbert <dgilbert@daveg.ca>
MFC after: 1 week
Reviewed by: markj, mhorne
Differential Revision: https://reviews.freebsd.org/D31460
While here, use designated initializers and rename some AMD iommu method
implementations to match the corresponding op names. No functional
change intended.
Reviewed by: grehan
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31462
This does not appear to affect code generation, at least with the
default toolchain.
Noticed because incorrect output specifications lead to false positives
from KMSAN, as the instrumentation uses them to update shadow state for
output operands.
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31466
The use of Giant here is vestigal and does not provide any useful
synchronization. Furthermore, non-MPSAFE callouts can cause the
softclock threads to block waiting for long-running newbus operations to
complete.
Reported by: mav
Reviewed by: bz
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31470
We need to do so to safely traverse the ifnet list.
Reviewed by: bz
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31470
Some filesystems, e.g., devfs, do not populate va_birthtime in their
GETATTR implementations. To handle this, make sure that va_birthtime is
initialized to the quasi-standard value of { VNOVAL, 0 } before calling
VOP_GETATTR.
Reported by: KMSAN
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31468
This was added early in the development of the arm64 port when
cpu_switch was just a stub. It should have been removed when cpu_switch
was implemented, however this didn't seem to be the case, and the '%p'
was added.
As this hasn't been needed in 7 years we can remove it.
Sponsored by: The FreeBSD Foundation
When exiting to userspace the code is similar to the restore_registers
macro in exception.S. Rework it to remove most of the non-style
differences.
Sponsored by: The FreeBSD Foundation
Fix getsockopt() for the IPPROTO_IPV6 level socket options with the
following names: IPV6_HOPOPTS, IPV6_RTHDR, IPV6_RTHDRDSTOPTS,
IPV6_DSTOPTS, and IPV6_NEXTHOP.
Reviewed by: markj
MFC after: 3 days
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D31458
When the device name is provided, we can simply run strncmp() for each
line to quickly skip unrelated ones, that is much faster than sscanf()
and only then strcmp().
MFC after: 2 weeks
Both callout and taskqueue now have drain() routines not requiring
external locking. It allows to remove TASK flag and manual drain,
so the only thing remaining for lock to protect inside the callout
handler is ks_inq_length zero comparison, that can be lockless.
MFC after: 2 weeks
A module makefile must list all the header files it uses which are
generated at build time from interface definitions (.m files) in its
SRCS list.
Fixes: 5ad6d28cbe ("enetc: Support building the driver as a loadable module.")
The toolchain can reorder symbols, meaning that changing
the order of DRIVER_MODULE macros is not enough
to ensure that miibus gets registered first.
Use DRIVER_MODULE_ORDERED instead to fix the problem properly.
Fixes: 5ad6d28cbe ("enetc: Support building the driver as a loadable module.")
Reported by: jhb
A module makefile must list all the header files it uses which are
generated at build time from interface definitions (.m files) in its
SRCS list.
Fixes: 451bcf1b36
Reported by: ian
These ones were unambiguous cases where the Foundation was the only
listed copyright holder (in the associated license block).
Sponsored by: The FreeBSD Foundation
This turns debugging printf() into a KASSERT().
It's for ATA for now; SCSI will came later.
Reviewed By: imp
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D31380
Consistently use `nh` instead of always dereferencing
ro->ro_nh inside the if block.
Always use nexthop mtu, as it provides guarantee that mtu is accurate.
Pass `nh` pointer to rt_update_ro_flags() to allow upcoming uses
of updating ro flags based on different nexthop.
Differential Revision: https://reviews.freebsd.org/D31451
Reviewed by: kp
MFC after: 2 weeks
Notable upstream pull request merges:
#12339 Read past end of argv array in zpool_do_import()
#12365 Fixes in persistent L2ARC
#12383 Fixes for KMSAN reports
#12425 Avoid small buffer copying on write
#12428 Fix unfortunate NULL in spa_update_dspace
#12446 Allow disabling of unmapped I/O on FreeBSD
Obtained from: OpenZFS
OpenZFS commit: f3678d70ff
This has been present since the first revision of the file. The debugf
macros have always been unused so it doesn't actually do anything
useful, and besides, debugging should not be unconditionally turned on
for a production driver. Moreover, this breaks the riscv LINT kernel
build as sys/conf/NOTES includes options DEBUG, resulting in a macro
redefinition error. This does not show up in the arm64 LINT kernel build
since that has an explicit nooptions DEBUG, which is dubious and should
be revisited. Rather than copy such a hack to riscv's NOTES, fix this
specific instance of DEBUG breaking.
Fixes: 896e217a0e ("fu740_pci_dw: Add SiFive FU740 PCIe controller driver")
MFC after: 1 week
The SiFive FU740 has both NVMe and USB so we need both to ensure we can
mount root, and HID is a dependency of USB.
Reviewed by: kp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31036
If we allocate a new window for a bridge rather than reusing an existing
one set up by firmware to cover all the devices then the new window only
includes the range needed for the first device to allocate the resource.
If a request comes in to adjust this resource in order to extend a
downstream window for another device then this will fail as the rman
doesn't have any space, so we must first grow the bridge's own window.
This is needed to support successfully attaching more than one PCI
device on SiFive's HiFive Unmatched, which has the following topology:
Root Port <---> Bridge <---> Bridge <-+-> Bridge <---> (Unused)
(pcib0) (pcib1) (pcib2) | (pcib3)
+-> Bridge <---> xHCI
| (pcib4)
+-> Bridge <---> M.2 E-key
| (pcib5)
+-> Bridge <---> M.2 M-key
| (pcib6)
+-> Bridge <---> x16 slot
(pcib7)
Without this, the xHCI endpoint successfully attaches but NVMe M.2 M-key
endpoint fails to attach as, when its adjacent bridge (pcib6) attempts
to allocate a window from its parent (pcib2) on the other side of the
switch, its parent attempts to grow its own window by calling
bus_adjust_resource on its own parent (pcib1) which fails to call the
root port device (pcib0) to request more memory to grow its own window.
Had the root port been directly connected to the switch without the
bridge in the middle then the existing code would have worked, but the
extra hop broke it.
Reviewed by: jhb
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31035
This is present on both the FU540 and FU740, but only needed for the
FU740 in order to assert reset and power enable signals for its PCIe
controller.
Reviewed by: mhorne
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31031
This is needed for FU740 PCIe support. Whilst we don't need the FU540's
resets they are also defined for completeness.
Reviewed by: manu
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31024
This avoids noisy output from early attempts to attach before clk_fixed
has attached to the parent clocks.
Reviewed by: kp, mhorne
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31023
The FU740 has a very similar controller and will reuse most of the
driver. This also drops the dependency on the device-tree include for
the binding indices; the header doesn't namespace its contents (and nor
does the FU740 one) so using both would require seperate translation
units which would be unnecessarily complicated just to avoid defining
local copies of the small number of constants.
Whilst here, add the missing l to gemgxlclk's name and drop the prci_
prefix from tlclk's name as we don't prefix any of the others and it's
entirely unnecessary.
Reviewed by: kp, mhorne
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31021
Add the ability to map named components from IORT to their
SMMU or ITS node in order to setup interrupts.
It is now possible to find a node by its name (substring) and
resource ID similar to PCI nodes.
This is needed by work on a driver for NXP's Second Generation
Data Path Acceleration Architecture (DPAA2).
Reviewed by: andrew
MFC after: 2 weeks
Differential Revision:: https://reviews.freebsd.org/D31267
Factor out lltable locking logic from lltable_try_set_entry_addr()
into a separate lltable_acquire_wlock(), so the latter can be used
in other parts of the code w/o duplication.
Create nd6_try_set_entry_addr() to avoid code duplication in nd6.c
and nd6_nbr.c.
Move lle creation logic from nd6_resolve_slow() into a separate
nd6_get_llentry() to simplify the former.
These changes serve as a pre-requisite for implementing
RFC8950 (IPv4 prefixes with IPv6 nexthops).
Differential Revision: https://reviews.freebsd.org/D31432
MFC after: 2 weeks
VOP_LOOKUP() is called with cn_flags bits ISLASTCN and ISOPEN
to indicate that the lookup is for the last component of a pathname
when doing open.
If the cn_flags also indicates if the open is for Reading, Writing or Both,
the NFSv4 client can do an NFSv4 Open operation in the same compound
RPC as Lookup, often avoiding the additional Open RPC now done when
VOP_OPEN() is called.
This patch defines two new cn_flags bits called OPENREAD and OPENWRITE
and sets these in open2nameif() based on FREAD, FWRITE flag bits.
This will allow a subsequent patch to the NFSv4 client to do the Open
operation in the same RPC as Lookup.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D31431
