used for the ICMP reply source in reponse to packets which are not
directly addressed to us. By default continue with with normal
source selection.
Reviewed by: bms
1. Root from inside a jail was able to unmount any file system
(except /).
2. Unprivileged root was able to unmount file systems mounted by
privileged root (execpt /).
3. User from inside a jail was able to mount file system when
sysctl vfs.usermount was set to 1.
4. User was able to mount file system when vfs.usermount was set to 1
(that's ok) and unmount it even if vfs.usermount was equal to 0
(that's not correct).
Possibility from point 1 was reported by: Dariusz Kowalski <darek@76.pl>
Only a part of this fix will be MFC'ed (if approved).
PR: kern/60149
Reviewed by: rwatson
Approved by: scottl (mentor)
MFC after: 3 days
the system. Also, decrease the poll interval to 10 seconds from 30
seconds. This is needed because some systems will report an invalid high
temperature for one poll cycle. It is suspected this is due to the
embedded controller timing out. A typical value is 138C for one cycle on a
system that is otherwise 65C. This prevents the system from prematurely
shutting down after one invalid reading. It will still shut down after 30
seconds of high temperature, which is the same as previous default
behavior.
Tested by: Scott Lambert <lambert AT lambertfam.org>
is for an 802.11 device or not. At least one driver I have does not
support the OID_802_11_NETWORK_TYPES_SUPPORTED OID.
Also, for now, don't do anything special in the ndis_suspend() method.
I originally wanted to shut down the NIC but leave the IFF_UP flag alone
since technically the interface is meant to remain up, but an interrupt
may be delivered to the ISR on suspend, and if this happens while the
NIC is halted, we will crash, since none of the miniport driver methods
will function.
This needs to be dealt with properly later, but for now this prevents
a panic, and the resume method properly re-inits the NIC.
the thread that calls pmap_pte_quick() and by virtue of the page queues
lock being held, we can manage PADDR1/PMAP1 as a CPU private mapping.
The most common effect of this change is to reduce the overhead of the page
daemon on multiprocessors.
In collaboration with: tegge
packet along with data, instead of in their own packet. When serving files
of size (packetsize - headersize) or smaller, this will result in one less
packet crossing the network. Quick testing with thttpd and http_load has
shown a noticeable performance improvement in this case (350 vs 330 fetches
per second.)
Included in this commit are two support routines, iov_to_uio, and m_uiotombuf;
these routines are used by sendfile to construct the header mbuf chain that
will be linked to the rest of the data in the socket buffer.
sense with sched_4bsd as it does with sched_ule.
- Use P_NOLOAD instead of the absence of td->td_ithd to determine whether or
not a thread should be accounted for in sched_tdcnt.
when uma_reclaim() was called. This was introduced when the zone
working-set algorithm was removed in favor of using the per cpu caches
as the working set.
would allocate two 'struct pipe's from the pipe zone, and malloc a
mutex.
- Create a new "struct pipepair" object holding the two 'struct
pipe' instances, struct mutex, and struct label reference. Pipe
structures now have a back-pointer to the pipe pair, and a
'pipe_present' flag to indicate whether the half has been
closed.
- Perform mutex init/destroy in zone init/destroy, avoiding
reallocating the mutex for each pipe. Perform most pipe structure
setup in zone constructor.
- VM memory mappings for pageable buffers are still done outside of
the UMA zone.
- Change MAC API to speak 'struct pipepair' instead of 'struct pipe',
update many policies. MAC labels are also handled outside of the
UMA zone for now. Label-only policy modules don't have to be
recompiled, but if a module is recompiled, its pipe entry points
will need to be updated. If a module actually reached into the
pipe structures (unlikely), that would also need to be modified.
These changes substantially simplify failure handling in the pipe
code as there are many fewer possible failure modes.
On half-close, pipes no longer free the 'struct pipe' for the closed
half until a full-close takes place. However, VM mapped buffers
are still released on half-close.
Some code refactoring is now possible to clean up some of the back
references, etc; this patch attempts not to change the structure
of most of the pipe implementation, only allocation/free code
paths, so as to avoid introducing bugs (hopefully).
This cuts about 8%-9% off the cost of sequential pipe allocation
and free in system call tests on UP and SMP in my micro-benchmarks.
May or may not make a difference in macro-benchmarks, but doing
less work is good.
Reviewed by: juli, tjr
Testing help: dwhite, fenestro, scottl, et al
track the load for the sched_load() function. In the SMP case this member
is not defined because it would be redundant with the ksg_load member
which already tracks the non ithd load.
- For sched_load() in the UP case simply return ksq_sysload. In the SMP
case traverse the list of kseq groups and sum up their ksg_load fields.
of sched_load(). This variable tracks the number of running and runnable
non ithd threads. This removes the need to traverse the proc table and
discover how many threads are runnable.
at packet arrival.
For benchmarking purposes SO_BINTIME is preferable to SO_TIMEVAL
since it has higher resolution and lower overhead. Simultaneous
use of the two options is possible and they will return consistent
timestamps.
This introduces an extra test and a function call for SO_TIMEVAL, but I have
not been able to measure that.
and ffs_write(). These calls trace their origins to the dead vfs_ioopt
code, first appearing in revision 1.39 of ufs_readwrite.c.
Observed by: bde
Discussed with: tegge
interrupt handler so that no locks are needed, and schedules the
command completion routine with a taskqueue_fast. This also corrects the
locking in the command thread and removes the need for operation flags.
Simple load tests show that this is now considerably faster than FreeBSD 4.x
in the SMP case when multiple i/o tasks are running.
"scheduler" here has very little to do with scheduling. It is actually
the swapper, and it really must be the last SYSINIT'ed item like its
comment says, since proc0 metamorphoses into swapper by calling
scheduler() last in mi_start(), and scheduler() never returns.. Rev.1.29
of subr_4bsd.c broke this by adding another SI_ORDER_FIRST item
(kproc_start() for schedcpu_thread() onto the SI_SUB_RUN_SCHEDULER_LIST.
The sorting of SYSINITs with identical orders (at all levels) is
apparently nondeterministic, so this resulted in schedule() sometimes
being called second last and schedcpu_thread() not being called at all.
This quick fix just changes the code to almost match the comment
(SI_ORDER_FIRST -> SI_ORDER_ANY). "LAST" is misspelled "ANY", and
there is no way to ensure that there is only 1 very lst SYSINIT.
A more complete fix would remove the SYSINIT obfuscation.
won't associate in BSS mode if you use AUTHMODE_SHARED. I probably don't
understand enough to know when SHARED should be used vs. OPEN or WPA.
For now, go back to what works.
bit for this being the last CTIO2. It didn't matter since it really was the
last CTIO2 and the resources recycled, but still....
Add in CTIO3 define for future DAC work.
for direct-mapped addresses. Assume that any address less than KVA
is one of these and return it. Also assert that an address is KVA
does have a valid mapping - callers of pmap_kextract don't check
the return value, since they assume that they have a valid virtual
address.
addressing of memory. Makes a substantial improvement for apps that
stress the limited amount of KVM on PPC (e.g. untarring the ports tree).
uma_machdep.c stolen from amd64/ia64.
updated for the regparm ABI on amd64.
Context switch debug regs.
Update for fpu simplification
Don't needlessly reload %cr3, in case the cpu has the tlb flush filter
turned off. Re-add LAZY_SWITCH stubs.
profiling buffers and hash table. This makes it a lot easier to
do multiple profiling runs without rebooting or performing
gratuitous arithmetic. Sysctl is named debug.mutex.prof.reset.
Reviewed by: jake
- witness_lock() is split into two pieces: witness_checkorder() and
witness_lock(). Witness_checkorder() determines if acquiring a specified
lock at the time it is called would result in a lock order. It
optionally adds a new lock order relationship as well. witness_lock()
updates witness's data structures to assume that a lock has been acquired
by stick a new lock instance in the appropriate lock instance list.
- The mutex and sx lock functions now call checkorder() prior to trying to
acquire a lock and continue to call witness_lock() after the acquire is
completed. This will let witness catch a deadlock before it happens
rather than trying to do so after the threads have deadlocked (i.e. never
actually report it).
- A new function witness_defineorder() has been added that adds a lock
order between two locks at runtime without having to acquire the locks.
If the lock order cannot be added it will return an error. This function
is available to programmers via the WITNESS_DEFINEORDER() macro which
accepts either two mutexes or two sx locks as its arguments.
- A few simple wrapper macros were added to allow developers to call
witness_checkorder() anywhere as a way of enforcing locking assertions
in code that might acquire a certain lock in some situations. The
macros are: witness_check_{mutex,shared_sx,exclusive_sx} and take an
appropriate lock as the sole argument.
- The code to remove a lock instance from a lock list in witness_unlock()
was unnested by using a goto to vastly improve the readability of this
function.
instead of taskqueue_swi. This shaves from 1 to 10% of the overhead.
Overhaul the locking once more, there was a few possible races that
are now closed.
panic() so that the buffer overflow just beyond this point is always
caught, even when the code is not compiled with INVARIANTS.
Change chn_setblocksize() buffer reallocation code to attempt to avoid
the feed_vchan16() buffer overflow by attempting to always keep the
bufsoft buffer at least as large as the bufhard buffer.
Print a diagnositic message
Danger! %s bufsoft size increasing from %d to %d after CHANNEL_SETBLOCKSIZE()
if our best attempts fail. If feed_vchan16() were to be called by
the interrupt handler while locks are dropped in chn_setblocksize()
to increase the size bufsoft to match the size of bufhard, the panic()
code in feed_vchan16() will be triggered. If the diagnostic message
is printed, it is a warning that a panic is possible if the system
were to see events in an "unlucky" order.
Change the locking code to avoid the need for MTX_RECURSIVE mutexes.
Add the MTX_DUPOK option to the channel mutexes and change the locking
sequence to always lock the parent channel before its children to avoid
the possibility of deadlock.
Actually implement locking assertions for the channel mutexes and fix
the problems found by the resulting assertion violations.
Clean up the locking code in dsp_ioctl().
Allocate the channel buffers using the malloc() M_WAITOK option instead
of M_NOWAIT so that buffer allocation won't fail. Drop locks across
the malloc() calls.
Add/modify KASSERTS() in attempt to detect problems early.
Abuse layering by adding a pointer to the snd_dbuf structure that points
back to the pcm_channel that owns it. This allows sndbuf_resize() to do
proper locking without having to change the its API, which is used by
the hardware drivers.
Don't dereference a NULL pointer when setting hw.snd.maxautovchans
if a hardware driver is not loaded. Noticed by Ryan Sommers
<ryans at gamersimpact.com>.
Tested by: Stefan Ehmann <shoesoft AT gmx.net>
Tested by: matk (Mathew Kanner)
Tested by: Gordon Bergling <gbergling AT 0xfce3.net>
debug.ddb_use_printf sysctl, output kernel debugger data to both the
console and kernel message buffer via printf. This fixes the case where
backtrace() went directly to the console and should help debugging greatly.
Thanks to Ian Dowse for the work, minor edits or any bugs are by myself.
Submitted by: iedowse
the proc lock only if we actually need to perform a stop. This
avoids two locks and unlocks of the process lock each system call,
and wins me about 20% on a simply system call test (getuid(),
which would otherwise require no locking). This also has a net
improvement of about 10MB/s on some of the SMP bandwidth tests
I'm running.
Reviewed by: jhb
- malloc() returns a void* and does not need a cast
- when called with M_WAITOK, malloc() can not return NULL so don't
check for that case. The result of the check was bogus anyway since
it would leave the interface broken.
o remove extraneous bzero
o add SYSINIT to properly initialize ip4_def_policy
Submitted by: "Bjoern A. Zeeb" <bzeeb+freebsd@zabbadoz.net>
Submitted by: gnn@neville-neil.com
assure backward compatibility (conditional on !BURN_BRIDGES), look it up
by its old name first, and log a warning (but accept the setting) if it
was found. If both the old and new name are defined, the new name takes
precedence.
Also export vm.kmem_size as a read-only sysctl variable; I find it hard to
tune a parameter when I don't know its default value, especially when that
default value is computed at boot time.
kbd_attach() is called kbd[0-9]+, with a different unit number. This
makes it impossible to write a devd rule which will automatically
switch to a USB keyboard when one is attached, because there is no way
to guess the correct device node to pass to kbdcontrol.
Therefore, change kbd_attach() to create a device node using the
keyboard device's real name (atkbd0, ukbd0...), and create the
kbd[0-9]+ node as an alias for backward compatibility.
on an SIOCSIFADDR (by way of brain damage in net80211).
Also, avoid trying to set NDIS_80211_AUTHMODE_AUTO since the Microsoft
documentation I have recommends not using it, and the Centrino driver
seems to dislike being told to use it.
every system call, and that grabs and release the process lock each
time. Don't fix it (yet), but document it so we know to fix it.
Also should be a 5.3-RELEASE todo item.
and NdisCancelTimer(). NdisInitializeTimer() doesn't accept an NDIS
miniport context argument, so we have to derive it from the timer
function context (which is supposed to be the adapter private context).
NdisCancelTimer is now an alias for NdisMCancelTimer().
Also add stubs for NdisMRegisterDevice() and NdisMDeregisterDevice().
These are no-ops for now, but will likely get fleshed in once I start
working on the Am1771/Am1772 wireless driver.
can look at the ACPI tables. If the startup fails, we panic and tell the
user to try rebooting with ACPI disabled. Previously in this case we
would try to use $PIR interrupt routing which only works for the atpic
while using the apic to handle interrupts which would result in misrouted
interrupts and a hang at boot time with no error message.
- Read the SCI out of the FADT instead of hardcoding 9 when checking to see
if an interrupt override entry is for the SCI.
- Try to work around some BIOS brain damage for the SCI's programming by
forcing the SCI to be level triggered and active low if it is routed
to a non-ISA interrupt (greater than 15) or if it is identity mapped with
edge trigger and active high polarity. This should fix some of the hangs
with device apic and ACPI that some people see.
Reviewed by: njl
problem here still to be solved: the sockaddr_hci has still a 16 byte
field for the node name. The code currently does not correctly use the
length field in the sockaddr to handle the address length, so
node names get truncated to 15 characters when put into a sockaddr_hci.
introducing a START_NOW command. This command does not send
and GET_IFINDEX message downstream (to wait for the response from
the ETHERNET node), but directly starts the sending process. This allows
one to generate traffic as input for any hook on any node.
ifconfig(8) flag since header for version 2 is the same but IP payload
is prepended with additional 4-bytes field.
Inspired by: Roman Synyuk <roman@univ.kiev.ua>
MFC after: 2 weeks
attached when shutting down, kill our kthreads, but don't destroy
the mutex pool and uma zone resources since the driver shutdown
routine may need them later.
device that doesn't exists. I'm using my discretion and
committing without mentor approval since Seigo is away.
Noticed by: Maxime Henrion <mux@freebsd.org>
own file and make it opt-in, not mandatory, depending on CPU_ENABLE_LONGRUN
config(8) option.
PR:
Submitted by:
Reviewed by:
Approved by:
Obtained from:
Discussed with: nate
MFC after: 2 weeks
than the switchin functions to guarantee that we're operating with the
correct tlb entry.
- Remove the post copy/zero tlb invalidations. It is faster to invalidate
an entry that is known to exist and so it is faster to invalidate after
use. However, some architectures implement speculative page table
prefetching so we can not be guaranteed that the invalidated entry is still
invalid when we re-enter any of these functions. As a result of this we
must always invalidate before use to be safe.
a deadlock in several years. Furthermore, the IPI code is currently
protected by a seperate spinlock. This only served to make IPIs twice as
expensive as they had to be which severely slowed down the IPI heavy ULE
scheduler.
SW_INVOL. Assert that one of these is set in mi_switch() and propery
adjust the rusage statistics. This is to simplify the large number of
users of this interface which were previously all required to adjust the
proper counter prior to calling mi_switch(). This also facilitates more
switch and locking optimizations.
- Change all callers of mi_switch() to pass the appropriate paramter and
remove direct references to the process statistics.
mutex profiling code. As with existing mutex profiling, measurement
is done with respect to mtx_lock() instances in the code, as opposed
to specific mutexes. In particular, measure two things:
(1) Lock contention. How often did this mtx_lock() call get made and
have to sleep (or almost sleep) waiting for the lock. This helps
identify the "victims" of contention.
(2) Hold contention. How often, while the lock was held by a thread
as a result of this mtx_lock(), did another thread try to acquire
the same mutex. This helps identify the causes of contention.
I'm currently exploring adding measurement of "time waited for the
lock", but the current implementation has proven useful to me so far
so I figured I'd commit it so others could try it out. Note that this
increases the size of mutexes when MUTEX_PROFILING is enabled, so you
might find you need to further bump UMA_BOOT_PAGES. Fixes welcome.
The once over: des, others
one which runs the actual update. This fixes a bug where there were
a delay in applying the frequency adjustment. In extreme cases this
could result in marginal stability of the kernel-pll.
full state. (When swap is added their state will change appropriately.)
2. Set swap_pager_full and swap_pager_almost_full to the full state when
the last swap device is removed.
Combined these changes eliminate nonsense messages from the kernel on swap-
less machines.
Item 2 submitted by: Divacky Roman <xdivac02@stud.fit.vutbr.cz>
Prodding by: phk
For some very unclear reason this device contains a FTDI 8U232AM USB->COM
adapter, but reports different device id than original 8U232AM. At the same
time, it reports vendor id of FTDI.
Sponsored by: Porta Software Ltd
MFC after: 2 weeks
Suggested by: nate
- get rid of "magick" values in code and make sysctl's reflecting reality
on processor versions which have one or another frequency "forbidden"
due to errata.
MFC after: 2 weeks
Suggested by: nate
- get rid of "magick" values in code and make sysctl's reflecting reality
on processor versions which have one or another frequency "forbidden"
due to errata.
PR:
Submitted by:
Reviewed by:
Approved by:
Obtained from:
MFC after: 2 weeks
the user requests a read-only mount. This is necessary because we
don't do the VOP_OPEN again if they upgrade a read-only mount to
read-write.
Noticed by: bde
The uidinfo code appears to be MPSAFE, and is referenced without Giant
elsewhere. While this grab of Giant was only made in fairly rare
circumstances (actually GC'ing on refcount==0), grabbing Giant here
potentially introduces lock order issues with any locks held by the
caller. So this probably won't help performance much unless you change
credentials a lot in an application, and leave a lot of file descriptors
and cached credentials around. However, it simplifies locking down
consumers of the credential interfaces.
Bumped into by: sam
Appeased: tjr
to a new prison_complete() task run by a task queue. This removes
a requirement for grabbing Giant in crfree(). Embed the 'struct task'
in 'struct prison' so that we don't have to allocate memory from
prison_free() (which means we also defer the FREE()).
With this change, I believe grabbing Giant from crfree() can now be
removed, but need to check the uidinfo code paths.
To avoid header pollution, move the definition of 'struct task'
to _task.h, and recursively include from taskqueue.h and jail.h; much
preferably to all files including jail.h picking up a requirement to
include taskqueue.h.
Bumped into by: sam
Reviewed by: bde, tjr
Replace wrong check returned EFBIG with EOVERFLOW handling from POSIX:
36708 [EOVERFLOW] The file is a regular file, nbyte is greater than 0, the
starting position is before the end-of-file, and the starting position is
greater than or equal to the offset maximum established in the open file
description associated with fildes.
ffs_write:
Replace u_int64_t cast with uoff_t cast which is more natural for types
used.
ffs_write & ffs_read:
Remove uio_offset and uio_resid checks for negative values, the caller
supposed to do it already. Add comments about it.
Reviewed by: bde
recwin and sendwin. This removes a big source of confusion and makes
following the code much easier.
Reviewed by: sam (mentor)
Obtained from: DragonFlyBSD rev 1.6 (hsu)
rid's and to deallocate resources if a failure occurs during attach. This
patch also fixes the driver to return failure if bus_alloc_resource() for
the IRQ fails rather than panic'ing on the next line by passing a NULL
resource to bus_setup_intr(). The other attachments already do all this.
Submitted by: Jun Su <csujun@263.net>
In case no real/physical IEEE 802 address is available, both the expired
"draft-leach-uuids-guids-01" (section "4. Node IDs when no IEEE 802
network card is available") and RFC 2518 (section "6.4.1 Node Field
Generation Without the IEEE 802 Address") recommend (quoted from RFC
2518):
"The ideal solution is to obtain a 47 bit cryptographic quality random
number, and use it as the low 47 bits of the node ID, with the _most_
significant bit of the first octet of the node ID set to 1. This bit
is the unicast/multicast bit, which will never be set in IEEE 802
addresses obtained from network cards; hence, there can never be a
conflict between UUIDs generated by machines with and without network
cards."
Unfortunately, this incorrectly explains how to implement this and
the FreeBSD UUID generator code inherited this generation bug from
the broken reference code in the standards draft. They should instead
specify the "_least_ significant bit of the first octet of the node ID"
as the multicast bit in a memory and hexadecimal string representation
of a 48-bit IEEE 802 MAC address.
This standards bug arised from a false interpretation, as the multicast
bit is actually the _most_ significant bit in IEEE 802.3 (Ethernet)
_transmission order_ of an IEEE 802 MAC address. The standards authors
forgot that the bitwise order of an _octet_ from a MAC address _memory_
and hexadecimal string representation is still always from left (MSB,
bit 7) to right (LSB, bit 0).
Fortunately, this UUID generation bug could have occurred on systems
without any Ethernet NICs only.
no-op on {i386/alpha/ia64/sparc64} where chars are signed by
default. Should help ARM and S390 which also suffer from this.
Tested on: ppc, i386, objdump disasm before/after diffs
Reviewed by: obrien, bde (a while back)
use a bounce buffer for the actual transfer to avoid crossing a 64k
boundary. To do this, we malloc a buffer twice as big as we need and then
find an aligned block within that buffer to do the transfer. The check
to see which part of the block we use used the wrong variable for part of
the condition meaning that in certain edge cases we would ask the BIOS to
cross a 64k boundary. The BIOS request would then fail resulting in file
transfers that just magically fail in the middle without any apparent
reason. Specifically, my tests for the splitfs boot floppies managed to
trigger this edge case.
MFC after: 1 week
X-MFC-info: along with fixes to libstand filesystems
Presumably, at some point, you had to include jail.h if you included
proc.h, but that is no longer required.
Result of: self injury involving adding something to struct prison
is NULL, otherwise ipsec4_process_packet() may try to m_freem() a
bad pointer.
In ipsec4_process_packet(), don't try to m_freem() 'm' twice; ipip_output()
already did it.
Obtained from: netbsd
o For traps, the cr.iip register points to the next instruction to
execute on interrupt return (modulo slot). Since we need to get
the bundle of the instruction that caused the FP fault/trap, make
sure we fetch the previous bundle if the next instruction is in
fact the first in a bundle.
o When we call the FPSWA handler, we need to tell it whether it's
a trap or a fault (first argument). This was hardcoded to mean a
fault.
Also, for FP faults, when a fault is converted to a trap, adjust the
cr.iip and cr.ipsr registers to point to the next instruction. This
makes sure that the SIGFPE handler gets a consistent state.
active scan is completed just as WI_RID_READ_APS.
This fixes wicontrol -L for ath(4) and awi(4) to have results even if
the driver cannot associate any APs.
rev.1.1040. It is a miscellaneous isa+pci driver, but came back
described as a pci-only driver and placed in an i4b pci subsection
after its migration to /sys/conf/NOTES. Put it back where it used to
be, fully unsorted in the `Miscellaneous hardware' section. Reduced
nearby disorder in this section by moving configuration of the digi
driver to where it was for the old digiboard drivers, so that the
order at least matches the order in the table of contents.
- references to removed math emulators for NPX_DEBUG
- header for the null set of mandatory devices
- reference to the removed (and bogus when it existed) sysctl
kern.timecounter.method.
FIxed some nearby disorder (descriptions of CPU_BLUELIGHTNING_3X,
CPU_DIRECT_MAPPED_CACHE, CPU_DISABLE_CMPXCHG, CPU_DISABLE_SSE,
CPU_ELAN_XTAL and CPU_SOEKRIS, and options for all of these except
CPU_DIRECT_MAPPED_CACHE).
problem with using taskqueue_swi is that some of the things we defer
into threads might block for up to several seconds. This is an unfriendly
thing to do to taskqueue_swi, since it is assumed the taskqueue threads
will execute fairly quickly once a task is submitted. Reorganized the
locking in if_ndis.c in the process.
Cleaned up ndis_write_cfg() and ndis_decode_parm() a little.
CPU_ENABLE_TCC enables Thermal Control Circuitry (TCC) found in some
Pentium(tm) 4 and (possibly) later CPUs. When enabled and detected,
TCC allows to restrict power consumption by using machdep.cpuperf*
sysctls. This operates independently of SpeedStep and is useful on
systems where other mechanisms such as apm(4) or acpi(4) don't work.
Given the fact that many, even modern, notebooks don't work properly
with Intel ACPI, this is indeed very useful option for notebook owners.
Obtained from: OpenBSD
MFC after: 2 weeks
CPU_ENABLE_TCC enables Thermal Control Circuitry (TCC) found in some
Pentium(tm) 4 and (possibly) later CPUs. When enabled and detected,
TCC allows to restrict power consumption by using machdep.cpuperf*
sysctls. This operates independently of SpeedStep and is useful on
systems where other mechanisms such as apm(4) or acpi(4) don't work.
Given the fact that many, even modern, notebooks don't work properly
with Intel ACPI, this is indeed very useful option for notebook owners.
Obtained from: OpenBSD
MFC after: 2 weeks
without IFCAP_VLAN_HWTAGGING. The previous version of the
leading comment in this file could lead to the opposite conclusion.
Fix some typos in the comment as well.
ubd_devinfo_vp() is getting an empty string from its usbd_get_string()
call on the vendor, instead of NULL. This means usb_knowndevs in not
consulted.
Add lines between grabbing those char *s and the USBVERBOSE ifdef to
set vendor to NULL if it is the empty string (similarly for product).
This causes vendor to be filled-out, although the product name read
overrules usb_knowndevs (this appears to be a conscience decision made
by the NetBSD folks):
PR: kern/56097
Submitted by: Hal Burch <hburch@lumeta.com>
MFC after: 1 week
pain and suffering. Attempt to back it out by removing the 'if the
requested range is larger than the window, clip to the window' code.
This is a band-aide until the issues are better understood and the
issues with the lazy allocation patches are resolved.
Makes it possible to have multiple packet aliasing instances in a
single process by moving all static and global variables into an
instance structure called "struct libalias".
Redefine a new API based on s/PacketAlias/LibAlias/g
Add new "instance" argument to all functions in the new API.
Implement old API in terms of the new API.
This takes us a lot closer to refcounting dev_t.
This patch originally by cg@ with a few minor changes by me.
It is largely untested, but has been HEADSUP'ed twice, so presumably
people have not found any issues with it.
Submitted by: cg@
This prevents xpt_bus_register() from dereferencing NULL.
- Assign pointer to NULL after cam_sim_free().
Submitted by: Paul Twohey <twohey@CS.Stanford.EDU>
file has been removed, it should be purged from the cache, but it need
not be removed from the directory stack causing corruption; instead,
it will simply be removed once the last references and holds on it
are dropped at the end of the unlink/rmdir system calls, and the
normal !UN_CACHED VOP_INACTIVE() handler for unionfs finishes it off.
This is easily reproduced by repeated "echo >file; rm file" on a
unionfs mount. Strangely, "echo -n >file; rm file" didn't make
it happen.
- Unify the conditional assignments section so that architectural
exclusions come first, sorted, then options and !options, sorted
by the option name, also in directory order, then architecture
specific sections, sorted by the architecture name, with i386
being a traditional exception.
Prodded by: bde
According to the Windows DDK header files, KSPIN_LOCK is defined like this:
typedef ULONG_PTR KSPIN_LOCK;
From basetsd.h (SDK, Feb. 2003):
typedef [public] unsigned __int3264 ULONG_PTR, *PULONG_PTR;
typedef unsigned __int64 ULONG_PTR, *PULONG_PTR;
typedef _W64 unsigned long ULONG_PTR, *PULONG_PTR;
The keyword __int3264 specifies an integral type that has the following
properties:
+ It is 32-bit on 32-bit platforms
+ It is 64-bit on 64-bit platforms
+ It is 32-bit on the wire for backward compatibility.
It gets truncated on the sending side and extended appropriately
(signed or unsigned) on the receiving side.
Thus register_t seems the proper mapping onto FreeBSD for spin locks.
the definitions for NDIS_BUS_SPACE_IO and NDIS_BUS_SPACE_MEM logically
belong in hal_var.h. At least, that's my story, and I'm sticking to it.
Also, remove definition of __stdcall from if_ndis.c now that it's pulled
in from pe_var.h.
in OpenBSD by Niels Provos. The patch introduces a bitmap of allocated
file descriptors which is used to locate available descriptors when a new
one is needed. It also moves the task of growing the file descriptor table
out of fdalloc(), reducing complexity in both fdalloc() and do_dup().
Debts of gratitude are owed to tjr@ (who provided the original patch on
which this work is based), grog@ (for the gdb(4) man page) and rwatson@
(for assistance with pxeboot(8)).
of adding the code to lock and unlock the vnodes and taking care
to avoid deadlock, simplify linux_emul_convpath() by comparing the
vnode pointers directly instead of comparing their va_fsid and
va_fileid attributes. This allows the removal of the calls to
VOP_GETATTR().
This gives +10% performance on simple tests, so definitly worth it.
A few percent more could be had by not using M_ZERO'd alloc's, but
we then need to clear fields all over the place to be safe, and
that was deemed not worth the trouble (and it makes life dangerous).
be sure to increment the refcount of the argument so it is not
prematurely deleted. This is a workaround and may appear in a different
form in ACPI-CA. This fixes battery evaluation on Thinkpads that was
broken by fixing the Dell battery state.
Submitted by: Luming Yu <luming.yu@intel.com>
of the functions in libkern. Without this, parts of the kernel would
reference a non-existent (undeclared and undefined) ffs() function; the
only reason this didn't break the kernel build is that gcc happens to
have a built-in ffs() and incorrectly fails to warn about the lack of
prototypes for built-in functions.
ithread_remove_handler() may fail to remove the interrupt handler if
it decides to let the ithread do the removal. The problem is that during
boot "cold" is set, which causes msleep() to return immediately. This
will cause ithread_remove_handler() to fail to wait for the ithread
to do the removal from the handler TAILQ before freeing the handler
back to the heap. Bad things will happen when some other user of the
TAILQ, such as ithread_add_handler() or the actual ithread attempts to use
the freed handler. Fix the problem by forcing ithread_remove_handler()
to do the actual removal itself if the "cold" flag is set.
Reviewed by: jhb
kmem_free(). Note: The FreeBSD-specific code in this file has been
subsumed by the FreeBSD-specific header file, pdq_freebsd.h. That header
file already specifies the use of contigmalloc() and contigfree(). Thus,
the purpose of this change is to avoid having nonsensical examples of
FreeBSD-specific memory allocation in our source tree.
the MacIO chip and PSIM's IOBus. Bus-specific drivers should
use the identify method to attach themselves to nexus so
interrupt can be allocated before the h/w is probed. The
'early attach' routine in openpic is used for this stage
of boot. When h/w is probed, the openpic can be attached
properly. It will enable interrupts allocated prior to
this.
and add_child entry point to allow devices to use the identify
method to add themselves if need be (e.g. openpic, syscons).
Export interrupt-controller-add routine for extern int cntlr drivers.
Eliminate recursive OFW device-tree walk and only iterate the
top-level ala sparc64. Allow child devices to set the device
type with write_ivars.
Step 1 of many in removing the hard-dependency on OpenFirmware.
map ranges that are smaller than what our resource manager code knows
is available, rather than requiring that they match exactly. This
fixes a problem with the Intel PRO/1000 gigE driver: it wants to map
a range of 32 I/O ports, even though some chips appear set up to
decode a range of 64. With this fix, it loads and runs correctly.
unexpected interrupts. If an interrupt is triggered and we're not
finished initializing yet, bail. If we have finished initializing,
but IFF_UP isn't set yet, drain the interrupt with ndis_intr() or
ndis_disable_intr() as appropriate, then return _without_ scheduling
ndis_intrtask().
In kern_ndis.c:ndis_load_driver() only relocate/dynalink a given driver
image once. Trying to relocate an image that's already been relocated
will trash the image. We poison a part of the image header that we
don't otherwise need with a magic value to indicate it's already been
fixed up. This fixes the case where there are multiple units of the
same kind of device.
count.
- Fix the twiddle output so that it actually spins.
- Save %cx around BIOS calls to read in sectors from the disc as at least
one BIOS trashes %cx when called to read off of a USB CD-ROM drive.
Submitted by: Martin Nilsson <martin@gneto.com>
MFC after: 1 week
these add support for listing BSSIDs via wicontrol -l. I added code
to call OID_802_11_BSSID_LIST_SCAN to allow scanning for any nearby
wirelsss nets.
Convert from using individual mutexes to a mutex pool, created in
subr_ndis.c. This deals with the problem of drivers creating locks
in their DriverEntry() routines which might get trashed later.
Put some messages under IFF_DEBUG.
of the leftovers from the old version that really doesn't work anymore.
Add a reset function for host-end of the ATA channel. This is needed
for the SiI3112 in order to whack it back to reality if a device
locks up the SATA interface (thereby preventing that we can reset the
device). The result is that ATA now recovers from the timeouts that
happens with the SiI3112A and more or less all disks based on old
PATA electronics with a Marvell PATA->SATA converter. This includes
lots of the popular SATA dongles and the WDC Raptor disks..
I started with a year-old patch by Orlando Bassotto
<orlando.bassotto@ieo-research.it>, and ported it to 5.2-CURRENT along with
fixing the problems working with pre-Audigy cards.
signals to addresses to the child busses. Typically, ProgIf of 1
means a subtractive bridge. However, Intel has a whole lot of ones
with a ProgIf of 80 that are also subtractive. We cope with these
bridges too. This eliminates hw.pci.allow_unsupported_io_range
because that had almost the same effect as these patches (almost means
'buggy'). Remove the bogus checks for ISA bus locations: these cycles
aren't special and are only passed by transparent bridges.
We allow any range to succeed. If the range is a superset of the
range that's decoded, trim the resource to that range. Otherwise,
pass the range unchanged. This will change the location that PC Card
and CardBus cards are attached. This might bogusly cause some
overlapping allocation that wasn't present before, but the overlapping
fixes need to be in the pci level.
There's also a few formatting changes here.
implementation writes directly to a file, similar to the Darwin,
Solaris, and whoever else implementations, rather than buffering
through a pseudo-device.
a maximum dump size of 0, return a size-related error, rather
than returning success. Otherwise, waitpid() will incorrectly
return a status indicating that a core dump was created. Note
that the specific error doesn't actually matter, since it's lost.
MFC after: 2 weeks
PR: 60367
Submitted by: Valentin Nechayev <netch@netch.kiev.ua>
tcp6_usr_bind(), tcp_usr_connect(), and tcp6_usr_connect() before checking
to see whether the address is multicast so that the proper errno value
will be returned if sa_len is incorrect. The checks are identical to the
ones in in_pcbbind_setup(), in6_pcbbind(), and in6_pcbladdr(), which are
called after the multicast address check passes.
MFC after: 30 days
avoid relying on the minimum memory allocation size to avoid problems.
The check is somewhat redundant because the consumers of the returned
structure will check that sa_len is a protocol-specific larger size.
Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
Reviewed by: nectar
MFC after: 30 days
allnodes multicast route if the routing table has not been initialized.
This avoids a panic during boot if an interface detaches before the
routing table is initialized.
Submitted by: sam
setting the new process' p_pgrp again before inserting it in the p_pglist.
Without it we can get the new process to be inserted in a different p_pglist
than the one p2->p_pgrp points to, and this is not something we want to happen.
This is not a fix, merely a bandaid, but it will work until someone finds a
better way to do it.
Discussed with: jhb (a long time ago)
at it, use the ANSI C generic pointer type for the second argument,
thus matching the documentation.
Remove the now extraneous (and now conflicting) function declarations
in various libc sources. Remove now unnecessary casts.
Reviewed by: bde
which has two important flags in it: the 'allocated by NDIS' flag
and the 'media specific info present' flag. There are two Windows macros
for getting/setting media specific info fields within the ndis_packet
structure which can behave improperly if these flags are not initialized
correctly when a packet is allocated. It seems the correct thing
to do is always set the NDIS_PACKET_ALLOCATED_BY_NDIS flag on
all newly allocated packets.
This fixes the crashes with the Intel Centrino wireless driver.
My sample card now seems to work correctly.
Also, fix a potential LOR involving ndis_txeof() in if_ndis.c.
By default, we search for files in /compat/ndis. This can be changed with
a systcl. These routines are used by some drivers which need to download
firmware or microcode into their respective devices during initialization.
Also, remove extraneous newlines from the 'built-in' sysctl/registry
variables.
in slightly less usual states:
If the thread is on a run queue, display "running" if the thread is
actually running, otherwise, "runnable".
If the thread is sleeping, and it's on a sleep queue, display the
name of the queue, otherwise "unknown" -- previously, in this situation
we would display "iowait".
If the thread is waiting on a lock, display *lockname.
If the thread is suspended, display "suspended" -- previously, in
this situation we would display "iowait".
If the thread is waiting for an interrupt, display "intrwait" --
previously, in this situation we would display "iowait".
If the thread is in a state not handled by the above, display
"unknown" -- previously, we would print "iowait".
Among other things, this avoids displaying "iowait" when the foreground
process turns out to be suspended waiting for a debugger to properly
attach.
holding the mutex. Because the sigacts pointer can't change while
the process is "live" (proc locking (x)), we know our pointer is still
valid.
In communication with: truckman
Reviewed by: jhb
free pages queue. This is presently needed by contigmalloc1().
- Move a sanity check against attempted double allocation of two pages
to the same vm object offset from vm_page_alloc() to vm_page_insert().
This provides better protection because double allocation could occur
through a direct call to vm_page_insert(), such as that by
vm_page_rename().
- Modify contigmalloc1() to hold the mutex synchronizing access to the
free pages queue while it scans vm_page_array in search of free pages.
- Correct a potential leak of pages by contigmalloc1() that I introduced
in revision 1.20: We must convert all cache queue pages to free pages
before we begin removing free pages from the free queue. Otherwise,
if we have to restart the scan because we are unable to acquire the
vm object lock that is necessary to convert a cache queue page to a
free page, we leak those free pages already removed from the free queue.
MAC address in the EEPROM, and we need to get it from OpenFirmware.
This isn't very pretty but time is lacking to do this in a better
way this near 5.2-RELEASE. This is a RELENG_5_2 candidate.
Original version by: Marius Strobl <marius@alchemy.franken.de>
Tested by: Pete Bentley <pete@sorted.org>
Reviewed by: jake
resource exhaustion attacks.
For network link optimization TCP can adjust its MSS and thus
packet size according to the observed path MTU. This is done
dynamically based on feedback from the remote host and network
components along the packet path. This information can be
abused to pretend an extremely low path MTU.
The resource exhaustion works in two ways:
o during tcp connection setup the advertized local MSS is
exchanged between the endpoints. The remote endpoint can
set this arbitrarily low (except for a minimum MTU of 64
octets enforced in the BSD code). When the local host is
sending data it is forced to send many small IP packets
instead of a large one.
For example instead of the normal TCP payload size of 1448
it forces TCP payload size of 12 (MTU 64) and thus we have
a 120 times increase in workload and packets. On fast links
this quickly saturates the local CPU and may also hit pps
processing limites of network components along the path.
This type of attack is particularly effective for servers
where the attacker can download large files (WWW and FTP).
We mitigate it by enforcing a minimum MTU settable by sysctl
net.inet.tcp.minmss defaulting to 256 octets.
o the local host is reveiving data on a TCP connection from
the remote host. The local host has no control over the
packet size the remote host is sending. The remote host
may chose to do what is described in the first attack and
send the data in packets with an TCP payload of at least
one byte. For each packet the tcp_input() function will
be entered, the packet is processed and a sowakeup() is
signalled to the connected process.
For example an attack with 2 Mbit/s gives 4716 packets per
second and the same amount of sowakeup()s to the process
(and context switches).
This type of attack is particularly effective for servers
where the attacker can upload large amounts of data.
Normally this is the case with WWW server where large POSTs
can be made.
We mitigate this by calculating the average MSS payload per
second. If it goes below 'net.inet.tcp.minmss' and the pps
rate is above 'net.inet.tcp.minmssoverload' defaulting to
1000 this particular TCP connection is resetted and dropped.
MITRE CVE: CAN-2004-0002
Reviewed by: sam (mentor)
MFC after: 1 day
Add tcode_str[] and improve debug message.
* sbp
If max_speed is negative, use the maximum speed which the
ohci chip supports. The default max_speed is -1.
* if_fwe
If tx_speed is negative, use the maximum speed which the
ohci chip supports. The default tx_speed is 2.
restore the general pre-randomid behaviour.
Setting the ip_id to zero causes several problems with
packet reassembly when a device along the path removes
the DF bit for some reason.
Other BSD and Linux have found and fixed the same issues.
PR: kern/60889
Tested by: Richard Wendland <richard@wendland.org.uk>
Approved by: re (scottl)
the ni_dpccountlock member is an ndis_kspin_lock, not an
ndis_spin_lock (the latter is too big).
Run if_ndis.c:ndis_tick() via taskqueue_schedule(). Also run
ndis_start() via taskqueue in certain circumstances.
Using these tweaks, I can now get the Broadcom BCM5701 NDIS
driver to load and run. Unfortunately, the version I have seems
to suffer from the same bug as the SMC 83820 driver, which is
that it creates a spinlock during its DriverEntry() routine.
I'm still debating the right way to deal with this.
frame, not the first. It is probably also not safe to free the mbuf chain
as soon as the OWN bit is cleared on the first descriptor since the chip
may not be done copying the frame into the transmit FIFO. Revert the part of
of busdma conversion (if_dc.c rev 1.115) which changed dc_txeof() to look for
the status in the first descriptor and free the mbuf chain when processing
the first descriptor for the frame, and revert the matching changes elsewhere
in the driver. This part of the busdma change caused the driver to report
spurious collisions and output errors, even when running in full-duplex mode.
Reverting the mbuf chain handling slightly complicates dc_dma_map_txbuf(),
since it is responsible for setting the OWN bits on the descriptors, but does
not normally have direct access to the mbuf chain.
Tested by:
Dejan Lesjak <dejan.lesjak at ijs.si> alpha/<Intel 21143 10/100BaseTX>
"Xin LI" <delphij at frontfree.net> i386/<Macronix 98713 10/100BaseTX>
Wiktor Niesiobedzki <bsd at w.evip.pl> i386/<3Com OfficeConnect 10/100B>
Reviewed by: mux
held. However, if we need to translate a unicode message table message,
ndis_unicode_to_ascii() might malloc() some memory, which causes
a warning from witness. Avoid this by using some stack space to hold
the translated message. (Also bounds check to make sure we don't
overrun the stack buffer.)
replacement of struct proc by struct thread. This bug could cause a
NULL pointer dereferencation under certain circumstances (e. g. while
running /etc/rc.d/pcvt).
in subr_ndis and subr_ntoskrnl. This is faster and avoids potential
LOR whinage from witness (an LOR couldn't happen with the old code
since the interlocked inc/dec routines could not sleep with a lock
held, but this will keep witness happy and it's more efficient
anyway. I think.)
so we increment the right thing. (All work and not enough parens
make Bill something something...) This makes the RealTek 8139C+
driver work correctly.
Also fix some mtx_lock_spin()s and mtx_unlock_spin()s that should
have been just plain mtx_lock()s and mtx_unlock()s.
In kern_ndis.c: remove duplicate code from ndis_send_packets() and
just call the senddone handler (ndis_txeof()).
rfc3042 Limited retransmit
rfc3390 Increasing TCP's initial congestion Window
inflight TCP inflight bandwidth limiting
All my production server have it enabled and there have been no
issues. I am confident about having them on by default and it gives
us better overall TCP performance.
Reviewed by: sam (mentor)
are acting as router (ipforwarding enabled).
This doesn't fix the problem that host routes from ICMP redirects
are never removed from the kernel routing table but removes the
problem for machines doing packet forwarding.
Reviewed by: sam (mentor)
additions to sys/amd64/isa/icu.h from PIIX4 and other datasheets. I
tweaked a few comments based on the NetBSD header of the same name when I
merged the constants to sys/i386/isa/icu.h, but the vast majority of this
file was created independently by Peter and not taken from any existing
files.
Submitted by: peter
flag so that it can see if the message string is unicode or not and
do the conversion itself rather than doing it in subr_pe.c. This
prevents subr_pe.c from being dependent on subr_ndis.c.
the RT_MESSAGETABLE resources that some driver binaries have.
This allows us to print error messages in ndis_syslog().
- Correct the implementation of InterlockedIncrement() and
InterlockedDecrement() -- they return uint32_t, not void.
- Correct the declarations of the 64-bit arithmetic shift
routines in subr_ntoskrnl.c (_allshr, allshl, etc...). These
do not follow the _stdcall convention: instead, they appear
to be __attribute__((regparm(3)).
- Change the implementation of KeInitializeSpinLock(). There is
no complementary KeFreeSpinLock() function, so creating a new
mutex on each call to KeInitializeSpinLock() leaks resources
when a driver is unloaded. For now, KeInitializeSpinLock()
returns a handle to the ntoskrnl interlock mutex.
- Use a driver's MiniportDisableInterrupt() and MiniportEnableInterrupt()
routines if they exist. I'm not sure if I'm doing this right
yet, but at the very least this shouldn't break any currently
working drivers, and it makes the Intel PRO/1000 driver work.
- In ndis_register_intr(), save some state that might be needed
later, and save a pointer to the driver's interrupt structure
in the ndis_miniport_block.
- Save a pointer to the driver image for use by ndis_syslog()
when it calls pe_get_message().
on a non-recursive mutex will fail but will not trigger any assertions.
- Add an assertion to mtx_lock() that one never recurses on a non-recursive
mutex. This is mostly useful for the non-WITNESS case.
Requested by: deischen, julian, others (1)
Add empty line before first code line in functions with no local
variables.
Properly terminate comment sentences.
Indent lines which are longer that 80 characters.
Move v_addpollinfo closer to the rest of poll-related functions.
Move DEBUG_VFS_LOCKS ifdefed block to the end of file.
Obtained from: bde (partly)
Put a CTASSERT() on the size of the struct.
Use the struct where it is easy to do so in elan_mmcr.c
Add the Elan specific hardware reset code (also from jb@).
Make sigaltstack as per-threaded, because per-process sigaltstack state
is useless for threaded programs, multiple threads can not share same
stack.
The alternative signal stack is private for thread, no lock is needed,
the orignal P_ALTSTACK is now moved into td_pflags and renamed to
TDP_ALTSTACK.
For single thread or Linux clone() based threaded program, there is no
semantic changed, because those programs only have one kernel thread
in every process.
which left out SVR4 bits.
o O2Micro OZ711e1 is now recognized (note: I don't have one, and the current
owner of the Dell laptop is reporting problems).
o minor nits wrt copyright date.
and MiniportHandleInterrupt() is fired off later via a task queue in
ndis_intrtask(). This more accurately follows the NDIS interrupt handling
model, where the ISR does a minimal amount of work in interrupt context
and the handler is defered and run at a lower priority.
Create a separate ndis_intrmtx mutex just for the guarding the ISR.
Modify NdisSynchronizeWithInterrupt() to aquire the ndis_intrmtx
mutex before invoking the synchronized procedure. (The purpose of
this function is to provide mutual exclusion for code that shares
variables with the ISR.)
Modify NdisMRegisterInterrupt() to save a pointer to the miniport
block in the ndis_miniport_interrupt structure so that
NdisSynchronizeWithInterrupt() can grab it later and derive
ndis_intrmtx from it.
laptops that resulted in problems reading battery status. Don't
copy Buffers, Packages, or Regions in DsStoreObjectToLocal().
Tested by: scottl, sam
Submitted by: Luming Yu (Intel)
Move diagnostic printf after vget. This might delay the debug
output some, but at least it keeps kernel from exploding if
DEBUG_VFS_LOCKS is in effect.
driver was compiled with.
Remove debug printf from ndis_assicn_pcirsc(). It doesn't serve
much purpose.
Implement NdisMIndicateStatus() and NdisMIndicateStatusComplete()
as functions in subr_ndis.c. In NDIS 4.0, they were functions. In
NDIS 5.0 and later, they're just macros.
Allocate a few extra packets/buffers beyond what the driver asks
for since sometimes it seems they can lie about how many they really
need, and some extra stupid ones don't check to see if NdisAllocatePacket()
and/or NdisAllocateBuffer() actually succeed.
is useless for threaded programs, multiple threads can not share same
stack.
The alternative signal stack is private for thread, no lock is needed,
the orignal P_ALTSTACK is now moved into td_pflags and renamed to
TDP_ALTSTACK.
For single thread or Linux clone() based threaded program, there is no
semantic changed, because those programs only have one kernel thread
in every process.
is useless for threaded programs, multiple threads can not share same
stack.
The alternative signal stack is private for thread, no lock is needed,
the orignal P_ALTSTACK is now moved into td_pflags and renamed to
TDP_ALTSTACK.
For single thread or Linux clone() based threaded program, there is no
semantic changed, because those programs only have one kernel thread
in every process.
unmodified for ATAPI type devices with ports/sysutils/cdrtools.
(But we need timeout routine which was in kern/58649 for fixate, I think.)
PR: kern/58649
Submitted by: SAKIYAMA Nobuo <sakichan@sakichan.org>
calling the haltfunc. If an interrupt is triggered by the init
or halt func, the IFF_UP flag must be set in order for us to be able
to service it.
In kern_ndis.c: implement a handler for NdisMSendResourcesAvailable()
(currently does nothing since we don't really need it).
In subr_ndis.c:
- Correct ndis_init_string() and ndis_unicode_to_ansi(),
which were both horribly broken.
- Implement NdisImmediateReadPciSlotInformation() and
NdisImmediateWritePciSlotInformation().
- Implement NdisBufferLength().
- Work around my first confirmed NDIS driver bug.
The SMC 9462 gigE driver (natsemi 83820-based copper)
incorrectly creates a spinlock in its DriverEntry()
routine and then destroys it in its MiniportHalt()
handler. This is wrong: spinlocks should be created
in MiniportInit(). In a Windows environment, this is
often not a problem because DriverEntry()/MiniportInit()
are called once when the system boots and MiniportHalt()
or the shutdown handler is called when the system halts.
With this stuff in place, this driver now seems to work:
ndis0: <SMC EZ Card 1000> port 0xe000-0xe0ff mem 0xda000000-0xda000fff irq 10 at device 9.0 on pci0
ndis0: assign PCI resources...
ndis_open_file("FLASH9.hex", 18446744073709551615)
ndis0: Ethernet address: 00:04:e2:0e:d3:f0
subr_ndis.c: implement NdisDprAllocatePacket() and NdisDprFreePacket()
(which are aliased to NdisAllocatePacket() and NdisFreePacket()), and
bump the value we return in ndis_mapreg_cnt() to something ridiculously
large, since some drivers apparently expect to be able to allocate
way more than just 64.
These changes allow the Level 1 1000baseSX driver to work for
the following card:
ndis0: <SMC TigerCard 1000 Adapter> port 0xe000-0xe0ff mem 0xda004000-0xda0043ff irq 10 at device 9.0 on pci0
ndis0: Ethernet address: 00:e0:29:6f:cc:04
This is already supported by the lge(4) driver, but I decided
to take a try at making the Windows driver that came with it work too,
since I still had the floppy diskette for it lying around.
the NTx86 section decoration).
subr_ndis.c: correct the behavior of ndis_query_resources(): if the
caller doesn't provide enough space to return the resources, tell it
how much it needs to provide and return an error.
subr_hal.c & subr_ntoskrnl.c: implement/stub a bunch of new routines;
ntoskrnl:
KefAcquireSpinLockAtDpcLevel
KefReleaseSpinLockFromDpcLevel
MmMapLockedPages
InterlockedDecrement
InterlockedIncrement
IoFreeMdl
KeInitializeSpinLock
HAL:
KfReleaseSpinLock
KeGetCurrentIrql
KfAcquireSpinLock
Lastly, correct spelling of "_aullshr" in the ntoskrnl functable.
is useless for threaded programs, multiple threads can not share same
stack.
The alternative signal stack is private for thread, no lock is needed,
the orignal P_ALTSTACK is now moved into td_pflags and renamed to
TDP_ALTSTACK.
For single thread or Linux clone() based threaded program, there is no
semantic changed, because those programs only have one kernel thread
in every process.
Reviewed by: deischen, dfr
This should fix the problem with removing an address space handler
although we don't currently use that capability so it's unlikely anyone
saw this problem.
attacks and is required to connect to Windows 2003 servers in their
default configuration. This adds an extra field to the SMB header
containing the truncated 64-bit MD5 digest of a key (a function of the
user's password and the server's authentication challenge), an implicit
sequence number, and the message data itself. As signing each message
imposes a significant performance penalty, we only enable it if the
server will not let us connect without it; this should eventually become
an option to mount_smbfs.
o promote several m_tag_* routines to inline
o add an m_tag_setup inline to set the fixed fields in a packet tag
o add an m_tag_free method pointer to each mtag to support, for example,
allocating tags from zones
o have m_tag_find check if the tag list is not empty before calling
m_tag_locate to search
Reviewed by: brooks, silence from others
report a hardware rev of 0x00000000. Sadly, the 8169 gigE MAC
also reports 0x00000000, so testing against this for exclusion
results in both cards being skipped by rl_probe(). Make the 8169
test more specific by matching against both the hwrev and the PCI
ID for this chip.
PR: kern/60824
copyrights to the inf parser files.
Add a -n flag to ndiscvt to allow the user to override the default
device name of NDIS devices. Instead of "ndis0, ndis1, etc..."
you can have "foo0, foo1, etc..." This allows you to have more than
one kind of NDIS device in the kernel at the same time.
Convert from printf() to device_printf() in if_ndis.c, kern_ndis.c
and subr_ndis.c.
Create UMA zones for ndis_packet and ndis_buffer structs allocated
on transmit. The zones are created and destroyed in the modevent
handler in kern_ndis.c.
printf() and UMA changes submitted by green@freebsd.org
faster.)
MFi386:
- Don't bother clearing PG_ZERO on the page table page in
_pmap_allocpte(); it serves no purpose.
- Don't bother clearing and setting PG_BUSY on page table directory pages.
DELAY(1) instead. After wading through old commit logs, I found that the
outb() was added not as part of the test but as an intentional delay. In
fact, according to Shanley's PCI book, the configuration 1 data and address
ports should only be accessed using aligned 32-bit accesses (i.e. inl()
and outl()). Thus, using outb() to just the last byte of the port violates
the PCI spec it would seem. On at least one box doing so broke the probe
for PCI, whereas changing it to a DELAY(1) fixed the probe.
Reported by: Sean Welch <welchsm@earthlink.net>
MFC after: 1 week
peter and jhb: use __volatile__ to prevent gcc from possibly reordering
code, use a null inline instruction instead of a no-op movl (I would
have done this myself if I knew it was allowed) and combine two register
assignments into a single asm statement.
- if_ndis.c: set the NDIS_STATUS_PENDING flag on all outgoing packets
in ndis_start(), make the resource allocation code a little smarter
about how it selects the altmem range, correct a lock order reversal
in ndis_tick().
vm object hasn't changed, the desired page will be at or near the root
of the vm object's splay tree, making vm_page_lookup() cheap. (The only
lock required for vm_page_lookup() is already held.) If, however, the
vm object has changed and retry was requested, eliminating the generation
check also eliminates a pointless acquisition and release of the page
queues lock.
ndis_var.h
- In kern_ndis.c:ndis_send_packets(), avoid dereferencing NULL pointers
created when the driver's send routine immediately calls the txeof
handler (which releases the packets for us anyway).
- In if_ndis.c:ndis_80211_setstate(), implement WEP support.
if_gre.c rev.1.41-1.49
o Spell output with two ts.
o Remove assigned-to but not used variable.
o fix grammatical error in a diagnostic message.
o u_short -> u_int16_t.
o gi_len is ip_len, so it has to be network byteorder.
if_gre.h rev.1.11-1.13
o prototype must not have variable name.
o u_short -> u_int16_t.
o Spell address with two d's.
ip_gre.c rev.1.22-1.29
o KNF - return is not a function.
o The "osrc" variable in gre_mobile_input() is only ever set but not
referenced; remove it.
o correct (false) assumptions on mbuf chain. not sure if it really helps, but
anyways, it is necessary to perform m_pullup.
o correct arg to m_pullup (need to count IP header size as well).
o remove redundant adjustment of m->m_pkthdr.len.
o clear m_flags just for safety.
o tabify.
o u_short -> u_int16_t.
MFC after: 2 weeks
there is no need turn it off when compiling with -finstrument-functions.
Having -Winline turned off mainly broke checking for bogus inlines in
kernels configured with high resolution profiling, e.g., LINT. Not
turning it off unbreaks the warnings for bogus inlines in istallion.c,
but at least the i386 LINT still builds because istallion.c is compiled
without -Werror due to other bugs in it.
- Clear out an_dma_vaddr on free so we can test to see if dma is
setup when the card is kldunloaded/kldloaded etc. only for MPI350
- Use a common detach like wi(4)
- Notify on RID read overflow and truncate this currently causes
a panic in -stable when the stack during an ifconfig an0 is done
with newer firmware
- Convert from UNLOCK/tsleep/LOCK to msleep. I thought I did that
a while ago.
method with something a little more intelligent: use BUS_GET_RESOURCE_LIST()
to run through all resources allocated to us and map them as needed. This
way we know exactly what resources need to be mapped and what their RIDs
are without having to guess. This simplifies both ndis_attach() and
ndis_convert_res(), and eliminates the unfriendly "ndisX: couldn't map
<foo>" messages that are sometimes emitted during driver load.
(msdosfs uses normal 8-char indentation almost everywhere else),
too-long lines, and minor English usage errors. The verbose formal
comment before the new function is still abnormal.
(mainly unsorting). There were no changes related to the dirty flag
here. The reference NetBSD implementation put msdosfs_advlock() in a
different place. This commit only moves its declarations and changes
some of the function body to be like the NetBSD version.
of ${.TARGET}). This was the last instances of @echo in module Makefiles
after it was removed in sio/Makefile. NOMAN is nonsense in module
Makefiles, and was removed, but came back here and in too many other
places.
- SRCS was totally disordered.
- the echos to create options headers were hidden using '@'.
- the args of echos to create options headers were single-quoted.
- the target names for the rules to create options headers were repeated.
- the unused option COMPAT_FREEBSD4 was put in opt_compat.h.
nb_size field in an ndis_buffer is meant to represent, but it does not
represent the original allocation size, so the sanity check doesn't
make any sense now that we're using the Windows-mandated initialization
method.
Among other things, this makes the following card work with the
NDISulator:
ndis0: <NETGEAR PA301 Phoneline10X PCI Adapter> mem 0xda004000-0xda004fff irq 10 at device 9.0 on pci0
This is that notoriously undocumented 10Mbps HomePNA Broadcom chipset
that people wanted support for many moons ago. Sadly, the only other
HomePNA NIC I have handy is a 1Mbps device, so I can't actually do
any 10Mbps performance tests, but it talks to my 1Mbps ADMtek card
just fine.
with one of std{in,out,err} open. This helps with the file descriptor
leaks reported on -current. This should probably be merged into 5.2.
Reviewed by: ru
Tested by: Bjoern A. Zeeb <bzeeb-lists@lists.zabbadoz.net>
o move tx taps from ath_start to ath_tx_start so lots more
state is available to tap
o add tx flags
o add tx rate
o add tx power (constant for the moment)
o add tx antenna state
o #ifdef _KERNEL the fallback definition for DLT_IEEE802_11_RADIO
o fix many comments
o rename antenna stuff and fix units/reference signal
o change IEEE80211_RADIOTAP_DBM_TX_POWER from unsigned 16-bit value
to a signed 8-bit value
o change IEEE80211_RADIOTAP_FLAGS from 16 bits to 8 bits to simplify
padding requirements
o drop IEEE80211_RADIOTAP_TIME
o change IEEE80211_RADIOTAP_ANTENNA from 16 bits to 8 bits
o drop IEEE80211_RADIOTAP_PAD
o add channel flag definitions for outside the kernel so radiotap
doesn't depend on stuff in ieee80211*.h
Obtained from: NetBSD
function back to near the beginning of the file. Rev.1.194 moved it into
the middle of auxiliary functions following kern_execve(). Moved the
__mac_execve() syscall function up together with execve(). It was new in
rev1.1.196 and perfectly misplaced after execve().
a new bpf_mtap2 routine that does the right thing for an mbuf
and a variable-length chunk of data that should be prepended.
o while we're sweeping the drivers, use u_int32_t uniformly when
when prepending the address family (several places were assuming
sizeof(int) was 4)
o return M_ASSERTVALID to BPF_MTAP* now that all stack-allocated
mbufs have been eliminated; this may better be moved to the bpf
routines
Reviewed by: arch@ and several others
(most recently bde), so I'll commit the module I've had knocking
around in my tree for a while. This may have some rough edges, so if
you are able to build it on non-i386 platform (including pc98) please
let me know you succeeded. When I get enough reports, I'll connect it
to the build. If there are problems, feel free to fix them.
Suggested by: bde
sched_cpu() locks an sx lock (allproc_lock) which can sleep if it fails to
acquire the lock, it is not safe to execute this in a callout handler from
softclock().
For received packets, an status of NDIS_STATUS_RESOURCES means we need
to copy the packet data and return the ndis_packet to the driver immediatel.
NDIS_STATUS_SUCCESS means we get to hold onto the packet, but we have
to set the status to NDIS_STATUS_PENDING so the driver knows we're
going to hang onto it for a while.
For transmit packets, NDIS_STATUS_PENDING means the driver will
asynchronously return the packet to us via the ndis_txeof() routine,
and NDIS_STATUS_SUCCESS means the driver sent the frame, and NDIS
(i.e. the OS) retains ownership of the packet and can free it
right away.
evaluate them. Whatever they're meant to do, they're doing it wrong.
Also:
- Clean up last bits of NULL fallout in subr_pe
- Don't let ndis_ifmedia_sts() do anything if the IFF_UP flag isn't set
- Implement NdisSystemProcessorCount() and NdisQueryMapRegisterCount().
packet being freed has NDIS_STATUS_PENDING in the status field of
the OOB data. Finish implementing the "alternative" packet-releasing
function so it doesn't crash.
For those that are curious about ndis0: <ORiNOCO 802.11abg ComboCard Gold>:
1123 packets transmitted, 1120 packets received, 0% packet loss
round-trip min/avg/max/stddev = 3.837/6.146/13.919/1.925 ms
Not bad!
add one if the SYN flag was set in the original packet. This seems to make
ip6fw reset work correctly for new and in-progress connections. Update
the man page to reflect the fact it now seems to work.
Glanced at by: ume
MFC after: 2 weeks
this driver by introducing a flag saying we already stopped the device.
On my Soekris net4801, this took a ping -i 0.001 from spending 80% of
time in interrupt handling to 10% (approx numbers).
This was a particular problem for the net4801 because the tree
interfaces share the same interrupt, but it would be a problem for
any configuration where an unused if_sis interface shares an interrupt
with a busy device.
Other drivers may have similar problems.
Thanks to: Luigi
The log message for rev.1.160 of kern/uipc_syscalls.c and associated
changes only claimed to add restrict qualifiers (which have no effect in
the kernel so they probably shouldn't be added), but the following
interface changes were also made:
- caddr_t to `void *' and `struct sockaddr_t *'
- `int *' to `socklen_t *'.
These interface changes are not quite null, and this fix is quick (like
the changes in uipc_syscalls 1.160) because it uses bogus casts instead
of complete bounds-checked conversions.
Things should be fixed better when the conversions can be done without
using the stack gap. linux_check_hdrincl() already uses the stack gap
and is fixed completely though the type mismatches in it were not fatal
(there were only fatal type mismatches from unopaquing pointers to
[o]sockaddr't's -- the difference between accept()'s args and oaccept()'s
args is now non-opaque, but this is not reflected in their args structs).
flag isn't set.
- In ndis_attach(), halt the NIC before exiting the routine. Calling
ndis_init() will bring it up again, and we don't want it running
(and potentially generating interrupts) until we're ready to deal
with it.
mbuf<->packet housekeeping. Instead, add a couple of extra fields
to the end of ndis_packet. These should be invisible to the Windows
driver module.
This also lets me get rid of a little bit of evil from ndis_ptom()
(frobbing of the ext_buf field instead of relying on the MEXTADD()
macro).
- Fix ndis_time().
- Implement NdisGetSystemUpTime().
- Implement RtlCopyUnicodeString() and RtlUnicodeStringToAnsiString().
- In ndis_getstate_80211(), use sc->ndis_link to determine connect
status.
Submitted by: Brian Feldman <green@freebsd.org>
- Add explicit cardbus attachment in if_ndis.c
- Clean up after moving bus_setup_intr() in ndis_attach().
- When setting an ssid, program an empty ssid as a 1-byte string
with a single 0 byte. The Microsoft documentation says this is
how you're supposed to tell the NIC to attach to 'any' ssid.
- Keep trace of callout handles for timers externally from the
ndis_miniport_timer structs, and run through and clobber them
all after invoking the haltfunc just in case the driver left one
running. (We need to make sure all timers are cancelled on driver
unload.)
- Handle the 'cancelled' argument in ndis_cancel_timer() correctly.
NDIS_80211_NET_INFRA_BSS: I accidentally reversed them during
transcription from the Microsoft headers. Note that the
driver will default to BSS mode, and you need to specify
'mediaopt adhoc' to get it into IBSS mode.
supposed to be opaque to the driver, however it is exposed through
several macros which expect certain behavior. In my original
implementation, I used the mappedsystemva member of the structure
to hold a pointer to the buffer and bytecount to hold the length.
It turns out you must use the startva pointer to point to the
page containing the start of the buffer and set byteoffset to
the offset within the page where the buffer starts. So, for a buffer
with address 'baseva,' startva is baseva & ~(PAGE_SIZE -1) and
byteoffset is baseva & (PAGE_SIZE -1). We have to maintain this
convention everywhere that ndis_buffers are used.
Fortunately, Microsoft defines some macros for initializing and
manipulating NDIS_BUFFER structures in ntddk.h. I adapted some
of them for use here and used them where appropriate.
This fixes the discrepancy I observed between how RX'ed packet sizes
were being reported in the Broadcom wireless driver and the sample
ethernet drivers that I've tested. This should also help the
Intel Centrino wireless driver work.
Also try to properly initialize the 802.11 BSS and IBSS channels.
(Sadly, the channel value is meaningless since there's no way
in the existing NDIS API to get/set the channel, but this should
take care of any 'invalid channel (NULL)' messages printed on
the console.
use it, if we ever did. They have been been VERY poorly maintained for
some time, possibly because they were a NOP. FWIW, This brings our table
formats back closer to the other *BSD's.
but *only* for the kernel. We can do this because the kernel is not a
standard C application environment. This would have stopped the recent
mtx_* arg NULL/MTX_DEF mixups from going unnoticed for so long.
broken BIOS. Separate ohci_controller_init() from ohci_init(),
and call ohci_controller_init() at resume process once more.
Discussed on [bsd-nomads:16737] - [bsd-nomads:16746].
Submitted by Hiroyuki Aizu <eyes@navi.org> [bsd-nomads:16741]
methods for USB devices in the same way of uhci driver. But this change
is not complete because some ohci controlers are not initialized completely.
So "kernel: usb0: 1 scheduling overruns" interrupt will generate many times.
This change will be same one in PR kern/60099.
Discussed on [bsd-nomads:16737] - [bsd-nomads:16746].
In NdisQueryBuffer() and NdisQueryBufferSafe(), the vaddr argument is
optional, so test it before trying to dereference it.
Also correct NdisGetFirstBufferFromPacket()/NdisGetFirstBufferFromPacketSafe():
we need to use nb_mappedsystemva from the buffer, not nb_systemva.
routines: NdisUnchainBufferAtBack(), NdisGetFirstBufferFromPacketSafe()
and NdisGetFirstBufferFromPacket(). This should bring us a little
closer to getting the Intel centrino wireless NIC to work.
Note: I have not actually tested these additions since I don't
have a driver that calls them, however they're pretty simple, and
one of them is taken pretty much directly from the Windows ndis.h
header file, so I'm fairly confident they work, but disclaimers
apply.
This guard page would have trapped the problems with the MFC of the PAE
support to RELENG_4 at an earlier point in the sequence of events.
Submitted by: tegge
pmap_init(). Such a large preallocation is unnecessary and wastes
nearly eight megabytes of kernel virtual address space per gigabyte
of managed physical memory.
- Increase UMA_BOOT_PAGES by two. This enables the removal of
pmap_pv_allocf(). (Note: this function was only used during
initialization, specifically, after pmap_init() but before
pmap_init2(). During pmap_init2(), a new allocator is installed.)
- handle multiple Ofw memory regions when determining mem size
- allow currdev to be set as a loader command-line option.
parse() is used to allow future options to be processed.
mincore(2) should check that the page is valid, not just allocated.
Otherwise, it can return a false positive for a page that is not yet
resident because it is being read from disk.
- Make ndis_get_info()/ndis_set_info() sleep on the setdone/getdone
routines if they get back NDIS_STATUS_PENDING.
- Add a bunch of net80211 support so that 802.11 cards can be twiddled
with ifconfig. This still needs more work and is not guaranteed to
work for everyone. It works on my 802.11b/g card anyway.
The problem here is Microsoft doesn't provide a good way to a) learn
all the rates that a card supports (if it has more than 8, you're
kinda hosed) and b) doesn't provide a good way to distinguish between
802.11b, 802.11b/g an 802.11a/b/g cards, so you sort of have to guess.
Setting the SSID and switching between infrastructure/adhoc modes
should work. WEP still needs to be implemented. I can't find any API
for getting/setting the channel other than the registry/sysctl keys.
cpu could have been bogged down with non-transferable load and still not
migrated a new thread to an idle cpu. This required some benchmarking and
tuning to get right as the comment above it suggests.
otherwise they are initialized twice when the code is statically
configured in the kernel because the module load method gets
invoked before the user application calls ip_mrouter_init
o add a mutex to synchronize the module init/done operations; this
sort of was done using the value of ip_mroute but X_ip_mrouter_done
sets it to NULL very early on which can lead to a race against
ip_mrouter_init--using the additional mutex means this is safe now
o don't call ip_mrouter_reset from ip_mrouter_init; this now happens
once at module load and X_ip_mrouter_done does the appropriate
cleanup work to insure the data structures are in a consistent
state so that a subsequent init operation inherits good state
Reviewed by: juli
- In sched_add(), do the idle check prior to the transfer check so that we
don't try to transfer load from an idle cpu. This fixes panics caused by
IPIs on UP machines running SMP kernels.
Reported/Debugged by: seanc
to each other.
Correct the recovery thread's loop so that it
will terminate properly on shutdown. We also
clear the recovery_thread proc pointer so that
any additional calls to aic_terminate_recovery_thread()
will not attempt to kill a thread that doesn't
exist. Lastly, code the loop so that termination
will still be successfull even if the termination
request occurs just prior to us entering the loop
or while the recovery thread is off recovering
commands.
which means "always stay in the standard mode of PPPoE operation
regardless of any junk floating around."
As the referenced PR stated clearly, the old default setting of 0
was extremely dangerous because it opened a possibility for a
spurious frame not only to put down a single PPPoE node running
FreeBSD, but to plague *every* FreeBSD node in a PPPoE network in
such a way that those nodes would keep poisoning each other until
rebooted simultaneously.
PR: kern/47920
Reviewed by: Gleb Smirnoff <glebius <at> cell.sick.ru>
MFC after: 1 week
that would cause an infinite loop any time we
manually flush the good status FIFO. Also make
our loop delay unconditional to ensure we don't
miss any FIFO allocations by the hardware.
nonstandard. They differ in the values of certain fields in
the PPPoE frame. Previously, ng_pppoe would start in standard
mode, yet switch to nonstandard one upon reception of a single
nonstandard frame. After having done so, ng_pppoe would be unable
to interact with standard PPPoE peers. Thus, a DoS condition
existed that could be triggered by a buggy peer or malicious party.
Since few people have expressed their displeasure WRT this problem,
the default operation of ng_pppoe is left untouched for now. However,
a new value for the sysctl net.graph.nonstandard_pppoe is introduced,
-1, which will force ng_pppoe stay in standard mode regardless of any
bogus frames floating around.
PR: kern/47920
Submitted by: Gleb Smirnoff <glebius <at> cell.sick.ru>
MFC after: 1 week
definitions for more than one device (usually differentiated by
the PCI subvendor/subdevice ID). Each device also has its own tree
of registry keys. In some cases, each device has the same keys, but
sometimes each device has a unique tree but with overlap. Originally,
I just had ndiscvt(8) dump out all the keys it could find, and we
would try to apply them to every device we could find. Now, each key
has an index number that matches it to a device in the device ID list.
This lets us create just the keys that apply to a particular device.
I also added an extra field to the device list to hold the subvendor
and subdevice ID.
Some devices are generic, i.e. there is no subsystem definition. If
we have a device that doesn't match a specific subsystem value and
we have a generic entry, we use the generic entry.
Implement this in acpi_MatchHid() and acpi_isa_get_compatid(). This
should fix mouse support for some users.
Move all users of AcpiGetObjectInfo() to use dynamic storage instead of
a devinfo on the stack. This is necessary since ACPI-CA needs to
allocate different sized arrays for the CompatList.
wait, rather than the socket label. This avoids reaching up to
the socket layer during connection close, which requires locking
changes. To do this, introduce MAC Framework entry point
mac_create_mbuf_from_inpcb(), which is called from tcp_twrespond()
instead of calling mac_create_mbuf_from_socket() or
mac_create_mbuf_netlayer(). Introduce MAC Policy entry point
mpo_create_mbuf_from_inpcb(), and implementations for various
policies, which generally just copy label data from the inpcb to
the mbuf. Assert the inpcb lock in the entry point since we
require consistency for the inpcb label reference.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
ahc_pci.c:
ahd_pci.c:
aic7xxx.c:
aic79xx.c:
aic_osm_lib.c:
aic_osm_lib.h:
Use common OSM routines from aic_osm_lib for bus dma operations,
delay routines, accessing CCBs, byte swapping, etc.
aic7xxx_pci.c:
Provide a better description for the 2915/30LP on attach.
aic7xxx.c:
aic79xx.c:
aic7770.c:
aic79xx_pci.c:
aic7xxx_pci.c:
aic7xxx_93cx6.c:
Move FBSDID behind an ifdef so that these core files will
still compile under other OSes.
aic79xx.h:
aic79xx_pci.c:
aic79xx.seq:
To speed up non-packetized CDB delivery in Rev B, all CDB
acks are "released" to the output sync as soon as the
command phase starts. There is only one problem with this
approach. If the target changes phase before all data are
sent, we have left over acks that can go out on the bus in
a data phase. Due to other chip contraints, this only
happens if the target goes to data-in, but if the acks go
out before we can test SDONE, we'll think that the transfer
has completed successfully. Work around this by taking
advantage of the 400ns or 800ns dead time between command
phase and the REQ of the new phase. If the transfer has
completed successfully, SCSIEN should fall *long* before we
see a phase change. We thus treat any phasemiss that
occurs before SCSIEN falls as an incomplete transfer.
aic79xx.h:
Add the AHD_FAST_CDB_DELIVERY feature.
aic79xx_pci.c:
Set AHD_FAST_CDB_DELIVERY for all Rev. B parts.
aic79xx.seq:
Test for PHASEMIS in the command phase for
all AHD_FAST_CDB_DELIVERY controlelrs.
ahd_pci.c:
ahc_pci.c:
aic7xxx.h:
aic79xx.h:
Move definition of controller BAR offsets to core header files.
aic7xxx.c:
aic79xx.c:
In the softc free routine, leave removal of a softc from the
global list of softcs to the OSM (the caller of this routine).
This allows us to avoid holding the softc list_lock during device
destruction where we may have to sleep waiting for our recovery
thread to halt.
ahc_pci.c:
Use ahc_pci_test_register access to validate I/O mapped in
addition to the tests already performed for memory mapped
access.
Remove unused ahc_power_state_change() function. The PCI
layer in both 4.X and 5.X now offer this functionality.
ahd_pci.c:
Remove reduntant definition of controller BAR offsets. These
are also defined in aic79xx.h.
Remove unused ahd_power_state_change() function. The PCI
layer in both 4.X and 5.X now offer this functionality.
aic7xxx.c:
aic79xx.c:
aic79xx.h:
aic7xxx.h:
aic7xxx_osm.c:
aic79xx_osm.c:
Move timeout handling to the driver cores. In the case
of the aic79xx driver, the algorithm has been enhanced
to try target resets before performing a bus reset. For
the aic7xxx driver, the algorithm is unchanged. Although
the drivers do not currently sleep during recovery (recovery
is timeout driven), the cores do expect all processing to
be performed via a recovery thread. Our timeout handlers
are now little stubs that wakeup the recovery thread.
aic79xx.c:
aic79xx.h:
aic79xx_inline.h:
Change shared_data allocation to use a map_node so
that the sentinel hscb can use this map node in
ahd_swap_with_next_hscb. This routine now swaps
the hscb_map pointer in additon to the hscb
contents so that any sync operations occur on
the correct map.
physaddr -> busaddr
Pointed out by: Jason Thorpe <thorpej@wasabisystems.com>
aic79xx.c:
Make more use of the in/out/w/l/q macros for accessing
byte registers in the chip.
Correct some issues in the ahd_flush_qoutfifo() routine.
o Run the qoutfifo only once the command channel
DMA engine has been halted. This closes a window
where we might have missed some entries.
o Change ahd_run_data_fifo() to not loop to completion.
If we happen to start on the wrong FIFO and the other
FIFO has a snapshot savepointers, we might deadlock.
This required our delay between FIFO tests to be
moved to the ahd_flush_qoutfifo() routine.
o Update/add comments.
o Remove spurious test for COMPLETE_DMA list being empty
when completing transactions from the GSFIFO with
residuals. The SCB must be put on the COMPLETE_DMA
scb list unconditionally.
o When halting command channel DMA activity, we must
disable the DMA channel in all cases but an update
of the QOUTFIFO. The latter case is required so
that the sequencer will update its position in the
QOUTFIFO. Previously, we left the channel enabled
for all "push" DMAs. This left us vulnerable to
the sequencer handling an SCB push long after that
SCB was already processed manually by this routine.
o Correct the polarity of tests involving
ahd_scb_active_in_fifo(). This routine returns
non-zero for true.
Return to processing bad status completions through
the qoutfifo. This reduces the time that the sequencer
is kept paused when handling transactions with bad
status or underruns.
When waiting for the controller to quiece selections,
add a delay to our loop. Otherwise we may fail to wait
long enough for the sequencer to comply.
On H2A4 hardware, use the slow slewrate for non-paced
transfers. This mirrors what the Adaptec Windows
drivers do.
On the Rev B. only slow down the CRC timing for
older U160 devices that might need the slower timing.
We define "older" as devices that do not support
packetized protocol.
Wait up to 5000 * 5us for the SEEPROM to become unbusy.
Write ops seem to take much longer than read ops.
aic79xx.seq:
For controllers with the FAINT_LED bug, turn the diagnostic
led feature on during selection and reselection. This covers
the non-packetized case. The LED will be disabled for
non-packetized transfers once we return to the top level idle
loop. Add more comments about the busy LED workaround.
Extend a critical section around the entire
command channel idle loop process. Previously
the portion of this handler that directly manipulated
the linked list of completed SCBs was not protected.
This is the likely cause of the recent reports of
commands being completed twice by the driver.
Extend critical sections across the test for,
and the longjump to, longjump routines. This
prevents the firmware from trying to jump to
a longjmp handler that was just cleared by the
host.
Improve the locations of several critical section
begin and end points. Typically these changes
remove instructions that did not need to be
inside a critical section.
Close the "busfree after selection, but before busfree
interrupts can be enabled" race to just a single sequencer
instruction. We now test the BSY line explicitly before
clearing the busfree status and enabling the busfree
interrupt.
Close a race condition in the processing of HS_MAILBOX
updates. We now clear the "updated" status before the
copy. This ensures that we don't accidentally clear
the status incorrectly when the host sneaks in an update
just after our last copy, but before we clear the status.
This race has never been observed.
Don't re-enable SCSIEN if we lose the race to disable SCSIEN
in our interrupt handler's workaround for the RevA data-valid
too early issue.
aic79xx_inline.h:
Add comments indicating that the order in which bytes are
read or written in ahd_inw and ahd_outw is important. This
allows us to use these inlines when accessing registers with
side-effects.
aic79xx_pci.c:
The 29320 and the 29320B are 7902 not 7901 based products.
Correct the driver banner.
aic7xxx.h:
Enable the use of the auto-access pause feature
on the aic7870 and aic7880. It was disabled due
to an oversight.
aic7xxx.reg:
Move TARG_IMMEDIATE_SCB to alias LAST_MSG to
avoid leaving garbage in MWI_RESIDUAL. This
prevents spurious overflows whn operating target
mode on controllers that require the MWI_RESIDUAL
work-around.
aic7xxx.seq:
AHC_TMODE_WIDEODD_BUG is a bug, not a softc flag.
Reference the correct softc field when testing
for its presence.
Set the NOT_IDENTIFIED and NO_CDB_SENT bits
in SEQ_FLAGS to indicate that the nexus is
invalid in await busfree.
aic7xxx_93cx6.c:
Add support for the C56/C66 versions of the EWEN and EWDS
commands.
aic7xxx.c:
aic7xxx_pci.c:
Move test for the validity of left over BIOS data
to ahc_test_register_access(). This guarantees that
any left over CHIPRST value is not clobbered by our
register access test and lost to the test that was
in ahc_reset.
reassigning their v_ops field to specfs, detaching from the mountpoint, etc.
However, this is not sufficient. If we vclean() the vnode the pages owned
by the vnode are lost, potentially while buffers reference them. Implement
parts of vclean() seperately in vgonechrl() so that the pages and bufs
associated with a device vnode are not destroyed while in use.
correctly, resulting in the dreaded "vm_pageout_flush: partially
invalid page" panic. The caching issue will be revisited in the
future, but opt for safety over performance in the meantime.
Tested by: gallatin
this definition. It fixes gnome for starters. I haven't tried *emacs yet.
Like IA64, amd64 uses registers for the first few arguments and then
the stack for the rest. This means the 64 bit promotion of the NULL (0)
value is lost and its just pushed on as an 'int' in a varargs call.
When the consumer walks the list and expects to pull off void * pointers
via va_arg, then all hell breaks loose.
Marcel: thanks a million for finding this!
the psim simulator. Look for the "file" property which only exists
on psim disks, and as a bonus, print the contents of this at boot-time,
which is the host file being used for the disk image.
- remove remaining warnings.
transfer size to the stripe size. This is a different
situation from reviving, where this limitation is necessary.
In initsd we're simply writing binary zeroes to the entire
disk, so the only effect of limiting the transfer is to slow
things down.
ndis_send_packets() but there's no link yet, we get an immediate
callback to ndis_txeof(), which clears if_timer. But ndis_start()
sets if_timer right after the call to ndis_send_packets(). Set
if_timer before calling ndis_send_packets().
Also fix mutex locking to prevent ndis_txeof() from running in
the middle of ndis_start().
make it more robust. This should fix problems with crashes under
heavy traffic loads that have been reported. Also add a 'query done'
callback handler to satisfy the e100bex.sys sample Intel driver.
eventually be passed an async. context as well as a syscall
context.
While here, fix a serious bug in that if the trapframe is a
syscall frame, but we're restoring an async context, we need
to clear the FRAME_SYSCALL flag so that we leave the kernel
via exception_restore.
NdisAnsiStringToUnicodeString(), NdisWriteConfiguration().
Also add stubs for NdisMGetDeviceProperty(), NdisTerminateWrapper(),
NdisOpenConfigurationKeyByName(), NdisOpenConfigurationKeyByIndex()
and NdisMGetDeviceProperty().
- fix ndis_time() so that it returns a time based on the proper
epoch (wacky though it may be)
- implement NdisInitializeString() and NdisFreeString(), and add
stub for NdisMRemoveMiniport()
ntoskrnl_var.h:
- add missing member to the general_lookaside struct (gl_listentry)
subr_ntoskrnl.c:
- Fix arguments to the interlocked push/pop routines: 'head' is an
slist_header *, not an slist_entry *
- Kludge up _fastcall support for the push/pop routines. The _fastcall
convention is similar to _stdcall, except the first two available
DWORD-sized arguments are passed in %ecx and %edx, respectively.
One kludge for this __attribute__ ((regparm(3))), however this
isn't entirely right, as it assumes %eax, %ecx and %edx will be
used (regparm(2) assumes %eax and %edx). Another kludge is to
declare the two fastcall-ed args as local register variables and
explicitly assign them to %ecx and %edx, but experimentation showed
that gcc would not guard %ecx and %edx against being clobbered.
Thus, I came up with a 3rd kludge, which is to use some inline
assembly of the form:
void *arg1;
void *arg2;
__asm__("movl %%ecx, %%ecx" : "=c" (arg1));
__asm__("movl %%edx, %%edx" : "=d" (arg2));
This lets gcc know that we're going to reference %ecx and %edx and
that it should make an effort not to let it get trampled. This wastes
an instruction (movl %reg, %reg is a no-op) but insures proper
behavior. It's possible there's a better way to do this though:
this is the first time I've used inline assembler in this fashion.
The above fixes to ntoskrnl_var.h an subr_ntoskrnl.c make lookaside
lists work for the two drivers I have that use them, one of which
is an NDIS 5.0 miniport and another which is 5.1.
subr_ndis.c: NdisGetCurrentSystemTime() which, according to the
Microsoft documentation returns "the number of 100 nanosecond
intervals since January 1, 1601." I have no idea what's so special
about that epoch or why they chose 100 nanosecond ticks. I don't
know the proper offset to convert nanotime() from the UNIX epoch
to January 1, 1601, so for now I'm just doing the unit convertion
to 100s of nanoseconds.
subr_ntoskrnl.c: memcpy(), memset(), ExInterlockedPopEntrySList(),
ExInterlockedPushEntrySList().
The latter two are different from InterlockedPopEntrySList()
and InterlockedPushEntrySList() in that they accept a spinlock to
hold while executing, whereas the non-Ex routines use a lock
internal to ntoskrnl. I also modified ExInitializePagedLookasideList()
and ExInitializeNPagedLookasideList() to initialize mutex locks
within the lookaside structures. It seems that in NDIS 5.0,
the lookaside allocate/free routines ExInterlockedPopEntrySList()
and ExInterlockedPushEntrySList(), which require the use of the
per-lookaside spinlock, whereas in NDIS 5.1, the per-lookaside
spinlock is deprecated. We need to support both cases.
Note that I appear to be doing something wrong with
ExInterlockedPopEntrySList() and ExInterlockedPushEntrySList():
they don't appear to obtain proper pointers to their arguments,
so I'm probably doing something wrong in terms of their calling
convention (they're declared to be FASTCALL in Widnows, and I'm
not sure what that means for gcc). It happens that in my stub
lookaside implementation, they don't need to do any work anyway,
so for now I've hacked them to always return NULL, which avoids
corrupting the stack. I need to do this right though.
throttling values being available regardless of the CPU's capabilities.
This has been broken since rev 1.1. Also clarify a comment.
Submitted by: Taku YAMAMATO <taku@cent.saitama-u.ac.jp>
Write 100 times for tomorrow:
I will never again free(9) a modified pointer.
Pointy Hat: yeah, yeah, yeah, can you just put it in the pile over there...
Only do short-cable on revisions that need it.
Move generic initialization before short-cable fix, in order to not
clobber short cable fix register setting.
it's an error to set the buffer bytecount to anything larger than
the buffer's original allocation size, but anything less than that
is ok.
Also, in ndis_ptom(), use the same logic: if the bytecount is
larger than the allocation size, consider the bytecount invalid
and the allocation size as the packet fragment length (m_len)
instead of the bytecount.
This corrects a consistency problem between the Broadcom wireless
driver and some of the ethernet drivers I've tested: the ethernet
drivers all report the packet frag sizes in buf->nb_bytecount, but
the Broadcom wireless driver reports them in buf->nb_size. This
seems like a bug to me, but it clearly must work in Windows, so
we have to deal with it here too.
- The new sched_balance_groups() function does intra-group balancing while
sched_balance() balances the available groups.
- Pick a random time between 0 ticks and hz * 2 ticks to restart each
balancing process. Each balancer has its own timeout.
- Pick a random place in the list of groups to start the search for lowest
and highest group loads. This prevents us from prefering a group based on
numeric position.
- Use a nasty hack to stop us from preferring cpu 0. The problem is that
softclock always runs on cpu 0, so it always has a little extra load. We
ignore this load in the balancer for now. In the future softclock should
run on a random cpu and these hacks can go away.
is provided to NDIS via the the miniport characteristics structure
supplied in the call to NdisMRegisterMiniport(). But in NDIS 5.0
and earlier, you had to call NdisMRegisterAdapterShutdownHandler()
and supply both a function pointer and context pointer.
We try to handle both cases in ndis_shutdown_nic(). If the
driver registered a shutdown routine and a context,then used
that context, otherwise pass it the adapter context from
NdisMSetAttributesEx().
This fixes a panic on shutdown with the sample Intel 82559 e100bex.sys
driver from the Windows DDK.
function pointer
flag rather than explicitly halting if a lookup failed.
- Add a loop around the call to lookup() to traverse an array of
nul-terminated strings for possible paths to the boot loader. A double
nul character denotes the end of the list.
- Add a new message to say that the boot failed if all of the path lookups
for a boot loader file failed.
- Add '/boot/loader' as a second boot path. If you build an ISO using
risky options to mkisofs such as -U then the loader will be called
'/boot/loader' rather than '/BOOT/LOADER;0'. This allows cdboot to work
with such risky ISO images.
- Bump version to 1.2 to denote added functionality.
The basic idea as well as some of the code were provided by the submitter,
but I added some extra code to use a loop rather than hard-code just 2
possible paths.
PR: misc/43543
Submitted by: kientzle
MFC after: 1 week
Yes, it's what you think it is. Yes, you should run away now.
This is a special compatibility module for allowing Windows NDIS
miniport network drivers to be used with FreeBSD/x86. This provides
_binary_ NDIS compatibility (not source): you can run NDIS driver
code, but you can't build it. There are three main parts:
sys/compat/ndis: the NDIS compat API, which provides binary
compatibility functions for many routines in NDIS.SYS, HAL.dll
and ntoskrnl.exe in Windows (these are the three modules that
most NDIS miniport drivers use). The compat module also contains
a small PE relocator/dynalinker which relocates the Windows .SYS
image and then patches in our native routines.
sys/dev/if_ndis: the if_ndis driver wrapper. This module makes
use of the ndis compat API and can be compiled with a specially
prepared binary image file (ndis_driver_data.h) containing the
Windows .SYS image and registry key information parsed out of the
accompanying .INF file. Once if_ndis.ko is built, it can be loaded
and unloaded just like a native FreeBSD kenrel module.
usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf
into an ndis_driver_data.h file that can be compiled into if_ndis.o.
Contains an .inf file parser graciously provided by Matt Dodd (and
mercilessly hacked upon by me) that strips out device ID info and
registry key info from a .INF file and packages it up with a binary
image array. The ndiscvt(8) utility also does some manipulation of
the segments within the .sys file to make life easier for the kernel
loader. (Doing the manipulation here saves the kernel code from having
to move things around later, which would waste memory.)
ndiscvt is only built for the i386 arch. Only files.i386 has been
updated, and none of this is turned on in GENERIC. It should probably
work on pc98. I have no idea about amd64 or ia64 at this point.
This is still a work in progress. I estimate it's about %85 done, but
I want it under CVS control so I can track subsequent changes. It has
been tested with exactly three drivers: the LinkSys LNE100TX v4 driver
(Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK
(e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It
still needs to have a net80211 stuff added to it. To use it, you would
do something like this:
# cd /sys/modules/ndis
# make; make load
# cd /sys/modules/if_ndis
# ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h
# make; make load
# sysctl -a | grep ndis
All registry keys are mapped to sysctl nodes. Sometimes drivers refer
to registry keys that aren't mentioned in foo.inf. If this happens,
the NDIS API module creates sysctl nodes for these keys on the fly so
you can tweak them.
An example usage of the Broadcom wireless driver would be:
# sysctl hw.ndis0.EnableAutoConnect=1
# sysctl hw.ndis0.SSID="MY_SSID"
# sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc)
# ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up
Things to be done:
- get rid of debug messages
- add in ndis80211 support
- defer transmissions until after a status update with
NDIS_STATUS_CONNECTED occurs
- Create smarter lookaside list support
- Split off if_ndis_pci.c and if_ndis_pccard.c attachments
- Make sure PCMCIA support works
- Fix ndiscvt to properly parse PCMCIA device IDs from INF files
- write ndisapi.9 man page
1. Use C99-style variable argument macros rather than GNU ones.
2. Don't cast id to ident_t. Its type is already ident_t and casting to
a union type is a constraint violation.
Submitted by: Stefan Farfeleder <stefan@fafoe.narf.at>
when using a KVM.
There is no actual solution possible, but this gets us pretty close.
Typically when switching back to a FreeBSD box and moving the mouse
wild data is produced, because the protocol's validation/checksum
system is extremely weak it is impossible to determine that we're
out of sync before dropping several bogus packets to user land.
The actual solution that appears to offer the best clamping of
jitter is to buffer the mouse packets if we've not seen mouse
activity for more than .5 seconds. Then waiting to flush that data
for 1/20th of a second. If within that 20th of a second we get any
packets that do fail the weak test we drop the entire queue and
back off accepting data from the mouse for 2 seconds and then repeat
the whole deal.
You can still get _some_ jitter, notably if you switch to the FreeBSD
box, then move the mouse just enough to generate one or two packets.
Those packets may be bogus, but may still pass the validity check.
One way to finally kill the problem once and for all is to check
the initial packets for "wild" values. Typically one sees packets
in the +/-60 range during normal operation, however when bogus data
is generated it's typically near the outer range of +/-120 or more,
those packets would be a good candidate for dropping or clamping.
I've been running with this for several weeks now and it has
significantly helped me stay sane even with a piece of junk Belkin
KVM causing wild jitter each and every time I switch.
Lastly I'd like to note that my experience with Windows shows me that
somehow the Microsoft PS/2 driver typically avoids this problem, but
that may only be possible when running the mouse in a dumb-ed down PS/2
mode that Belkin recommends on their site.
cpu are added to a group.
- Don't place a cpu into the kseq_idle bitmask until all cpus in that group
have idled.
- Prefer idle groups over idle group members in the new kseq_transfer()
function. In this way we will prefer to balance load across full cores
rather than add further load a partial core.
- Before a cpu goes idle, check the other group members for threads. Since
SMT cpus may freely share threads, this is cheap.
- SMT cores may be individually pinned and bound to now. This contrasts the
old mechanism where binding or pinning would have allowed a thread to run
on any available cpu.
- Remove some unnecessary logic from sched_switch(). Priority propagation
should be properly taken care of in sched_prio() now.
with the sendsig code in the MD area. It is not safe to assume that all
the register conventions will be the same. Also, the way of producing
32 bit code (.code32 directives) in this file is amd64 specific.
The split-up code is derived from the ia64 code originally.
Note that I have only compile-tested this, not actually run-tested it.
The ia64 side of the force is missing some significant chunks of signal
delivery code.
only turned up when running mac_test side by side with a transitioning
policy such as SEBSD. Make the NULL testing match
mac_test_execve_will_transition(), which already tested the vnode
label pointer for NULL.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
- Move loader relocation up to 0x1C00000. This is in line with OSX bootx,
and allows more space for boot-time modules/ramdisks without conflicting
with OpenFirmware's use of RAM
- OpenFirmware returns overlapping memory regions. Use a simple
brute force algorithm to merge these into non-overlapping
regions. This fixes bugs in reporting of available memory
and also prevents pages from being added twice in the VM system.
such that 'ispcvt' can build. Unforunately 'ispcvt' is needed in order for
/etc/rc.d/syscons to run. This fixes the bug where I could not get my
keymap effective at boot.
turnstile_unpend(). A racing thread that does not have TDI_LOCK set may
either be running on another CPU or it may be sitting on a run queue if it
was preempted during the very small window in turnstile_wait() between
unlocking the turnstile chain lock and locking sched_lock.
case of a turnstile having no threads is just one instance of the more
general case where the thread we are examining has been partially awakened
already in that it has been removed from the turnstile's blocked list but
still has TDI_LOCK set. We detect that case by checking to see if the
thread has already had a turnstile reassigned to it.
reboot, as calling OF_exit() just hangs a mac.
FreeBSD on my G4 800Mhz mac behaves identically to OSX for halt
and reboot now.
Reviewed by: grehan (who also supplied the concept and sample code)
Not all transfers between kernel and user space are byte oriented
and thus alignment safe. Especially fuword*() and suword*() are
sensitive to alignment but in general more optimal than block copies.
By catching the misalignment trap we avoid pessimizing the common
case of properly aligned memory accesses which we would do if we
were to use byte copies or adding tests for proper alignment.
Note that the expectation that the kernel produces aligned pointers
is unchanged. This change therefore relates to possible unaligned
pointers generated in userland.
versions of the firmware. It responds more slowly to commands, and we
bogusly failed them. We assume that all versions of the intersil
firmware before 1.0 are 10 times slower and will give it 10x the time
to finish.
# for 5.2 we should always just assume 5s.
(not interface addresses) to see if a given address is on-link.
- skip offlink prefixes in neighbor determination in nd6_is_addr_neighbor.
- in nd6_is_addr_neighbor, regarded every address as on-link when the
default router list is empty. otherwise, we'd not be able make a neighbor
cache for the address.
this algorithm is applied to hosts only.
- in nd6_is_addr_neighbor, check if the default interface is equal to
the interface in question in addition to check if the default router
list is empty.
Obtained from: KAME
Serialize access to the SATA channels, the chip messes up if
both channels are used at the same time.
The SiI3112 hereby takes the price as the most crappy SATA chip in
existance by a significant amount.
My advise to our userbase is to avoid this chip like the plague...
Setup decent transfer mode defaults as some BIOS's seem to put in
things that it *knows* doesn't work.
(Note to BIOS writers: stop doing that nonsense, we will get things
working with your crappy HW anyways, and then recommend users to buy
someone else's products that "just works", thankyou.. )
Limit the device transfer mode to ATA100/UDMA5 on generic SATA.
Since we dont know if the user is using a pure SATA device or an
old PATA drive with a SATA converter dongle, we need to limit the
speed used here to cover up the problems with Marvell ATA-SATA bridges
used in lots of SATA products.
This workaround is enabled for all detectable SATA controllers as they
seem to have semilar problems here. One notable exception is all the
Promise pdc2037x chips which just always work (cudos to Promise!).
as these ioctl's aren't MD. This also means they are installed in
/usr/include/dev/bktr now. Also provide compatability wrappers for
where these headers lived in 4.x.
as these ioctl's aren't MD. This also means they are installed in
/usr/include/dev/bktr now. Also provide compatability wrappers for
where these headers lived in 4.x.
Instead, allow the mapping to persist, but add the sf_buf to a free list.
If a later sendfile(2) or zero-copy send resends the same physical page,
perhaps with the same or different contents, then the mapping overhead is
avoided and the sf_buf is simply removed from the free list.
In other words, the i386 sf_buf implementation now behaves as a cache of
virtual-to-physical translations using an LRU replacement policy on
inactive sf_bufs. This is similar in concept to a part of
http://www.cs.princeton.edu/~yruan/debox/ patch, but much simpler in
implementation. Note: none of this is required on alpha, amd64, or ia64.
They now use their direct virtual-to-physical mapping to avoid any
emphemeral mapping overheads in their sf_buf implementations.
an int constant to a long constant. This change improves consistency
in the following two ways:
1. The first 8 arguments are always passed in registers on ia64, which
by virtue of the generated code implicitly widens ints to longs and
allows the use of an 32-bit integral type for 64-bit arguments.
Subsequent arguments are passed onto the memory stack, which does
not exhibit the same behaviour and consequently do not allow this.
In practice this means that variadic functions taking pointers
and given NULL (without cast) work as long as the NULL is passed
in one of the first 8 arguments. A SIGSEGV is more likely the
result if such would be done for stack-based arguments. This is
due to the fact that the upper 4 bytes remain undefined.
2. All 64-bit platforms that FreeBSD supports, with the obvious
exception of ia64, allow 32-bit integral types (specifically NULL)
when 64-bit pointers are expected in variadic functions by way of
how the compiler generates code. As such, code that works correctly
(whether rightfully so or not) on any platform other than ia64, may
fail on ia64.
To more easily allow tweaking of the definition of NULL, this commit
removes the 12 definitions in the various headers and puts it in a
new header that can be included whenever NULL is to be made visible.
This commit fixes GNOME, emacs, xemacs and a whole bunch of ports
that I don't particularly care about at this time...
flags. We now create asynchronous contexts or syscall contexts only.
Syscall contexts differ from the minimal ABI dictated contexts by
having the scratch registers saved and restored because that's where
we keep the syscall arguments and syscall return values.
Since this change affects KSE, have it use kse_switchin(2) for the
"new" syscall context.
functions less noisy: We printf if a new function took longer than
the previous record holder, or of the previous record holder took
more than twice as long as the current record.
to have the kernel switch to a new thread, instead of doing it in
userland. It is in fact needed on ia64 where syscall restarts do not
return to userland first. It's completely handled inside the kernel.
As such, any context created by the kernel as part of an upcall and
caused by some syscall needs to be restored by the kernel.
Be sure to shift (long)1 << 33 and higher, not (int)1. Otherwise bad
things happen(TM). This is why beast.freebsd.org paniced with ULE.
Reviewed by: jeff
mutex to be locked. It is redundant since em_init() is called and this
correctly locks the mutex and calls em_stop().
5.2 release candidate since this can cause a panic if the watchdog
expires.
Tested by: kuriyama
violated the constness were corrected before the freeze. This was
suggested by mdodd@, I think, and sam@ and others have signed off on
this if I recall my conversations with them correctly.
system super block after fsck has repaired the file system. The value of
fs_ronly was getting overwritten, which caused ffs_update() to attempt to
update inode timestamps even though the file system was still mounted
read-only.
This fixes the "giving up on N buffers" error that is triggered by running
fsck on the root file system and then rebooting without mounting the file
system read-write.
lots of old interfaces, and digi now supports all cards that dgb
supported. The author of the driver says that this is no longer
necessary.
Approved by: babkin@
a long time: lmc The LAN Media Corp PCI WAN driver based on tulip.
This driver hasn't compiled for 3 years since the PCI compat shims
were removed, and Lan Media appears to have gone out of business.
These cards appear to be rare (a recent search of ebay had no hits).
Should someone wish to revive this driver, submitting patches to make
it compile plus a testing report will bring it back.
or whose drivers haven't even compiled for years.
The loran hardware was very unique, and only a few copies of it ever
existed. It used the old COMPAT_ISA_DRIVER and when the author was
contacted, he indicated that he had no intention of ever updating this
driver and it was no longer relevant to the FreeBSD world and can be
removed without impact to anybody.
Approved by: phk
of doing a loop and taking two 32 bit passes at the runqueue bits. All
the 64 bit platforms should probably do this since there are 64 run queues.
Approved by: re (scottl)
used on amd64, and were actually totally broken. They had the wrong
calling conventions. I believe the i386 versions are going away too.
Approved by: re (scottl)
i386 version. The curthread special case in pcpu.h solves my complaint
about the verbose macro expansion in this case. Note that the i386
version still has some OBE comments, I didn't re-add them back again.
Approved by: re (scottl)
and the mpo_create_cred() MAC policy entry point to
mpo_copy_cred_label(). This is more consistent with similar entry
points for creation and label copying, as mac_create_cred() was
called from crdup() as opposed to during process creation. For
a number of policies, this removes the requirement for special
handling when copying credential labels, and improves consistency.
Approved by: re (scottl)
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
between vm_map and vnode locks is that vm_map locks are acquired first. In
revision 1.150 mmap(2) was changed to pass a locked vnode into vm_mmap().
This creates a lock-order reversal when vm_mmap() calls one of the vm_map
routines that acquires a vm_map lock. The solution implemented herein is
to release the vnode lock in mmap() before calling vm_mmap() and reacquire
this lock if necessary in vm_mmap().
Approved by: re (scottl)
Reviewed by: jeff, kan, rwatson
Update notes to reflect that cx is no longer a counted device
Update options for new cx option
# commented out ELAN_PPS and ELAN_XTAL since they produced errors
Submitted by: rik@cronyx.ru
Approved by: re@ <scottl>
