been repo-copied from src/lib/libc/uuid to src/include. Update the
makefiles.
While in src/include/Makefile, reformat and resort INCS. Reverting
the functional change only involves removing uuid.h.
Pompted by: ru
I've no idea if this is the right behavior for the library, but this
at least fixes the build, and matches what seems to be alfred's intent
in the commit message for 1.19.
sysconf.c:
Use 'break' rather than 'goto yesno' in sysconf.c so that we report a '0'
return value from the kernel sysctl.
vfs_aio.c:
Make aio reset its configuration parameters to -1 after unloading
instead of 0.
posix4_mib.c:
Initialize the aio configuration parameters to -1
to indicate that it is not loaded.
Add a facility (p31b_iscfg()) to determine if a posix4 facility has been
initialized to avoid having to re-order the SYSINITs.
Use p31b_iscfg() to determine if aio has had a chance to run yet which
is likely if it is compiled into the kernel and avoid spamming its
values.
Introduce a macro P31B_VALID() instead of doing the same comparison over
and over.
posix4.h:
Prototype p31b_iscfg().
libc. I want to keep these in some version for the thread
library/ies, but don't know whether to have them repo-copied
to libc_r or renamed and kept in libc.
Change the name of an alpha macro that was changed with the
system call commit.
subsystems capabilities:
_SC_AIO_LISTIO_MAX returns the default of _POSIX_AIO_LISTIO_MAX
_SC_AIO_MAX returns the default _POSIX_AIO_MAX
_SC_AIO_PRIO_DELTA_MAX returns the default of 0
Without these adjustments the values returned are -1 even when the
aio side of the kernel returns '0' for them which is incorrect.
Noticed by: Craig Rodrigues <rodrigc@attbi.com>
architecture, mainly to avoid getting a SIGFPE signal sent
when calling strtod(3) with certain input.
The SIGFPE has been sent because the code was not aware that
a Gradual Underflow is handled in software via traps on the
Alpha architecture, but is not implemented in our Alpha kernel
layer.
With `Sudden_Underflow' defined, strtod(3) should not depend
on Gradual Underflow and adjust its calculations accordingly,
which means that other, more subtle errors than the sending of
SIGFPE could be solved by this.
Discussed with: bde
PR: alpha/12623
PR: alpha/17032
PR: alpha/43567
MFC after: 7 days
caused by dynamic PAM modules that call openlog(3) and closelog(3),
e.g. ports/security/pam_pwdfile.
What happened here is that the module first registered its "ident"
with openlog(3), then PAM library unloaded module with dlclose(3),
and the next call to syslog(3) resulted in SIGSEGV.
MFC after: 3 days
o Remove the unwanted smartness in _longjmp() where it compares
the current ar.bspstore with the saved ar.bspstore and restores
ar.rnat based on it. This either avoids saving ar.rnat in the
jmp_buf or is the consequence of not saving ar.rnat. All this
complexity breaks libc_r where we use longjmp() to switch to
different threads and the current ar.bspstore has no relation
to the saved ar.bspstore. Thus: we save ar.rnat in setjmp()
and simply restore ar.bspstore and ar.rnat in longjmp().
This code needs a cleanup.
entries in the table being stubs. While I'm here, add macros to
auto-generate the stubs. A conforming threads library can override
the stub routines by filling in the jump table.
Add some entries to namespace.h and sync un-namespace.h to it.
Also add a comment to remind folks to update un-namespace.h
when changing namespace.h.
Don't force 16-byte alignment at run-time. Do it at compile-time.
This saves us the pointer fiddling by the setjmp functions and
reduces complexity. While here, increase the jmp_buf by 16 bytes
to an even 512 bytes. Coincidentally, due to the way alignment
was handled prior to this change, the jmp_buf has not changed in
size, but only in how the space is used. Prior to this change
the 16 bytes were reserved for enforcing alignment; now they are
reserved by us for future extensions.
Therefore, this ABI breaker is relatively save: the failure is
always an alignment trap.
namely uuidgen(1), uuidgen(2) and uuid(3), the following division
has been choosen:
uuidgen(1) A description of the command line utility,
and other user oriented UUID information.
uuidgen(2) A mostly technical description of UUIDs.
uuid(3) A description of the functions and other
programmer oriented UUID information.
According to the division: add more technical contents.
Contributed by: Hiten Pandya <hiten@uk.FreeBSD.org>
Edited and enhanced: marcel
to be static for 5.0. I may remove this for 5.1 or 5.2. No more
binaries or libarires will be generated with __sF starting as of
yesterday. Originally the plan had been to eliminate this for 5.0,
but we didn't get the __std{in,out,err}p changes merged into -stable
until yesterday (rather than in September 2001 like it should have
been). Given that didn't happen on time, we can't do the other part
of the scheme now.
# Please do not change this without talking to me first.
the page myself. The new language is more accurate than what was there
before, but the most accurate way of describing the funcionality eludes
me.
PR: kern/33904
MFC after: 1 month
the data value returned by kevent()'s EVFILT_READ filter on non-TCP
sockets accurately reflects the amount of data that can be read from the
sockets by applications.
PR: 30634
Reviewed by: -net, -arch
Sponsored by: NTT Multimedia Communications Labs
MFC after: 2 weeks
* Fix typos in rwlock stubs.
* Add pthread_XXX counterparts to the _pthread_XXX stubs which libraries
like libX11 can use to ensure thread-safety without requiring the use
of a thread library.
Submitted by: Terry Lambert (pthread_cond_broadcast)
Reviewed by: deischen
HUGE_VAL is not properly aligned on some architectures. The previous
fix now works because the two versions of 'math.h' (include/math.h
and lib/msun/src/math.h) have since been merged into one.
PR: bin/43544
functions is expected for uuidgen(1), mca(8) and gpt(8). Given the
generic use of UUIDs beyond the scope of the DCE 1.1 specification,
visibility of the data structure at all levels of the machine,
including firmware and the wish to not create a permanent build-
time FreeBSD-ism for DCE compliant applications by creating a new
library, it was decided that libc would be the least inappropriate
place. Also, because the UUID functions live in libc under IRIX as
well, we have maximized our portability and left as many options
open as possible.
This implementation introduces an extension not found in the
specification: the status parameter is allowed to be a NULL-
pointer. The reason for introducing the extension is because
the status is almost never of any use.
The manpage that's part of this commit is a minimal place-holder
and is further fleshed-out in the near future.
Approved by: re@
Contributed by: Hiten Mahesh Pandya <hiten@unixdaemons.com>
Sponsored by: marcel :-)
Tested on: alpha, i386, ia64
Don't gratuitously pipe thru a cat(1) if NODOCCOMPRESS.
Only create _stamp.extra when necessary.
Get rid of SOELIMPP and OBJS.
Use Groff version of soelim(1); we need its -I option
for the following to work.
Don't needlessly chdir to SRCDIR. Only a few documents
need CD_HACK, and those that need it either use refer(1)
or .PSPIC macro which internally uses the .psbb call.
return -1 regardless of what s points to, mbtowc(&w, s, 1) sets w to a
null wide character when s points to a null byte. This seems to be closer
to what most other implementations do, but the C99 standard contradicts
itself for these cases.
whether a named utility should behave in FreeBSD 4.x-compatible mode
or in a standard mode (default standard). The configuration is done
malloc(3)-style, with either an environment variable or a symlink.
Update expr(1) to use this new interface.
Implement new sysconf keys. Change the implenentation of
_SC_ASYNCHRONOUS_IO in preparation for the next set of changes.
Move some limits which had been in <sys/syslimits.h> to <limits.h> where
they belong. They had only ever been in syslimits.h to provide for the
kernel implementation of the CTL_USER MIB branch, which went away with
newsysctl years ago. (There is a #error in <sys/syslimits.h> which I
will downgrade in the next commit.)
- port range check need to be done before htons. from deraadt
- %d/%u audit
- correct bad practice in the code - it uses two changing variables
to manage buffer (buf and buflen). we eliminate buflen and use
fixed point (ep) as the ending pointer.
- use snprintf, not sprintf
- pass correct name into q.name. from lukem@netbsd
- sync comment
Obtained from: KAME
MFC after: 1 week
linking.
* Fix disorder in the SEE ALSO sections of aio_*(2).
* Remove unnecessary cross-references from the SEE ALSO sections of
aio_*(2); config(8), kldload(8) and kldunload(8) are cross-referenced
from aio(4).
* Remove the KERNEL OPTIONS sections from aio_*(2), now that these
pages cross-reference aio(4), which contains suitable kernel linking
reference material.
more efficient. The problem with the previous implementation was that it
calculated the length of the first argument ("big") with wcslen() when
it was not necessary.
to be passed. Point this out in a warning notice, which will eventually
go away, sometime between now and -RELEASE.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
two major bugs:
- off-by-one overflow when the length of the source string exceeds or
equals the destination buffer size.
- old version was not padding the destination buffer with null wide chars
This removes a lot of complexity, since we basically just reserve
space on a retrieval of a label, and pass around strings. Two new
elements: (1) consumers of the API must now declare what label
elements they are interested in retrieving, or (2) rely on the default
provided in a new configuration file, mac.conf.
Approved by: re
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
to bring in the new MAC label management API. With the new API
revision, we have only policy-agnostic code in libc and the base
kernel.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
maximum number of bytes that may be stored in the array, not the maximum
number of wide characters to read. The wording of the standard unfortunately
does not make this clear.
the compatibility library libcompat.
- Add new implementations of lsearch() and lfind() which conform to
IEEE Std 1003.1-2001 to libc. Add a new manual page for them and
add them to the makefile.
- Add function prototypes for lsearch() and lfind() to the search.h
header.
page from the compatibility library.
- Add new implementations of insque() and remque() which conform to
IEEE Std 1003.1-2001 to libc. Add a new manual page for them and
connect them to the build.
- Add the prototypes of insque() and remque() to the search.h
header.
in the UDP RPC client code. As a side-effect, this fixes some bugs
that might prevent the RPC call from ever timing out for example
if the server keeps responding with the wrong xid. This could
probably be simplified further by using the EVFILT_TIMER filter.
(at least the French ones), a memory leak upon successful termination, a
pointer arithmetic error causing heap corruption, and an off-by-one bug
causing incorrect amounts of padding at the right of the value.
"UTF2" method. Although UTF-8 and the old UTF2 encoding are compatible
for 16-bit characters, the new UTF-8 implementation is much more strict
about rejecting malformed input and also handles the full 31 bit range
of characters.
international monetary values: int_p_cs_precedes, int_n_cs_precedes,
int_p_sep_by_space, int_n_sep_by_space, int_p_sign_posn, int_n_sign_posn.
This should not break existing binaries or LC_MONETARY data files.
Reviewed by: ache
MFC after: 1 month
and getipnodeby*() thread-safe.
Our res_*() is not thread-safe. So, we share lock between
getaddrinfo() and getipnodeby*(). Still, we cannot use
getaddrinfo() and getipnodeby*() in conjunction with other
functions which call res_*().
Requested by: many people
`sigprocmask', `sigaltstack', and `sigwait' as well as to the
prototypes of the apparantly unimplemented functions `sigtimedwait'
and `sigwaitinfo'. This complies with IEEE Std 1003.1-2001.
ceased to be useful when the number of "special processes" went from 3
to one per device. I considered replacing it with a "kernel threads"
section, but this seemed like the wrong place for that.
PR: 40969
doesn't do this, and it wouldn't be very useful if it did, since the
caller supplies us with that number.
PR: 41329
Submitted by: Michael Galassi <nerd@xyz.com>
Although there was nothing wrong with getwc() and putwc(), getwchar()
and putwchar() assumed that <stdio.h> had been included before <wchar.h>,
which is not allowed by the standard.
va_end closer to the __vfprintf() call, free the buffer when __vfprintf()
fails and don't bother trying to shrink the buffer with realloc() before
returning it.
Submitted by: bde
- Sort local variable declarations.
- Protect a hand-formatted comment from indent(1).
- Use portable casts, even though this is machine-dependant code.
- Remove extraneous blank lines.
- Remove trailing newline.
- Use sigdelset(3), not SIGDELSET(9).
Requested by: bde
Use the correct constants directly from sysconf() rather than calling
sysctl() to tell us the (still compiled-in) value. Leave the CTL_POSIX1B
stuff alone for now (but I'd like to see this replaced with a single
structure returning all of the relevant information).
Implement all of the keys from 1003.1-2001 that we can. Ensure that
the build will break if someone redefines an option constant to zero
without implementing the necessary presence-detection logic here.
(4 of 5)
hack, thereby allowing future extensions to the structure (e.g., for extended
attributes) without rebreaking the ABI. FTSENT now contains a pointer to the
parent stream, which fts_compar() can then take advantage of, avoiding the
undefined behavior previously warned about. As a consequence of this change,
the prototype of the comparison function passed to fts_open() has changed
to reflect the required amount of constness for its use. All callers in the
tree are updated to use the correct prototype.
Comparison functions can now make use of the new parent pointer to access
the new stream-specific private data pointer, which is intended to assist
creation of reentrant library routines which use fts(3) internally.
Not objected to in spirit by: -arch
and wide characters. These were already documented in the manual page,
with an entry mentioning that they were not implemented yet. The XSI
%S and %C synoyms have not been added.
or "POSIX", other European locales). Use __sgetc() and __sputc() where
possible to avoid a wasteful lock and unlock for each byte and to avoid
function call overhead.
get applications to move to the ISO C interfaces as well as have the
freedom to replace the rune interfaces with ones that support stateful
conversions some time in the future.
here in terms of mbrtowc(), wcrtomb(), and the single-byte I/O functions.
The rune I/O functions are about to become deprecated in favour of the
ones provided by ISO C90 Amd. 1 and C99.
under way to move the remnants of the a.out toolchain to ports. As the
comment in src/Makefile said, this stuff is deprecated and one should not
expect this to remain beyond 4.0-REL. It has already lasted WAY beyond
that.
Notable exceptions:
gcc - I have not touched the a.out generation stuff there.
ldd/ldconfig - still have some code to interface with a.out rtld.
old as/ld/etc - I have not removed these yet, pending their move to ports.
some includes - necessary for ldd/ldconfig for now.
Tested on: i386 (extensively), alpha
KAME did the modification only to _dns_getaddrinfo(). However,
it is not sufficient, and res_queryN() should be modified, too.
So, I did same modification to res_queryN().
Obtained from: KAME
insure enough space is available for the response, or be prepared
to resize the buffer and retry as necessary.
Do the conservative thing and make sure enough space is available.
Reviewed by: silence on freebsd-audit
When it is called directly, gcc is smart enough to generate inline
code for it, which is why it wasn't noticed before that it was missing.
fabs() would probably better fit into libm, but it has traditionally been
in libc on FreeBSD, so there is probably software around that makes
assumptions about this by now.
of pointers to strings. These two arrays were fixed to the same size, but one
had an implicit zeroed trailer element, which was unused because the size was
used up by the ones before said zeroed trailer element. So the unused limb was
chopped off the over-sized-but-not-over-sized array, and everyone lived happily
ever after.
instead of on startup. This fixes binary compatibility of dynamically
linked binaries from before the signal code move.
Suggested by: wollman (a long time ago)
than 32 bits. It was trying to figure out things like the day of week
of when time_t is roughly 2^62 etc. Make a better guess for the starting
point for the binary search that works on both 32 and 64 bit types. I have
been using this for a while now.
bcopy(3) functions are prototyped in <strings.h> and not in
<string.h> anymore.
- Add a sentence about that to the respective HISTORY sections.
In the C source files:
- Include <string.h> or <strings.h> depending on what function
is to be compiled.
- Use ANSI-C function definitions.
.In string.h
with
.In strings.h
and adding a sentence to the HISTORY section.
- Use an ANSI-C function definition.
- Include <strings.h> instead of <string.h>.
- Apply style(9): Put a space after return keywords.
in the ANSI-C format.
- Change the code a bit to hopefully save some cycles.
I.e. (simplified) change
a = b + 1;
while (--b & 0x7)
/* ... */
to
a = b;
for (; b & 0x7; b--)
/* ... */
and
while (--a >= 0)
/* ... */
to
for (; a > 0; a--)
/* ... */
- Equip two function arguments of swab() with the 'restrict'
type qualifier in form of the '__restrict' macro. This is
specified by POSIX.1-2001.
<strings.h> as the associated header file.
The prototypes have been moved there from <string.h> because
POSIX.1-2001 said so.
- Conditionally include either <strings.h> or <string.h> based
on whether the [r]index() or str[r]chr() functions are
compiled, respectively.
- Style(9) tells us to
- put a space after the return keyword
- to check for a NUL character without using the ! operator.
- use NULL instead of (type *)NULL where the compiler knows
the type.
Apply these rules.
- Rather use ANSI-C function definitions than K&R ones.
- For index(3), correct second function argument's type; it was
declared to be a `const char' before and is now an `int'.
is <strings.h> and not <string.h> anymore.
- Tell the reader about this change in the HISTORY section.
- Switch to use an ANSI-C function definition.
- Include <strings.h> instead of <string.h> in the source file.
the prototypes for both functions are now in the <strings.h>
header, as required by IEEE Std 1003.1-2001.
- Add one sentence about that in the HISTORY section.
- Include <strings.h> in the source file to have the prototypes
in scope when the _ANSI_SOURCE macro is defined.
to fail needlessly if a reverse DNS lookup of the IP address didn't
come up with a hostname. As a comment in the code clearly stated,
the "damn hostname" was looked up only for the purpose of netgroup
matching. But if that lookup failed, the function bailed out
immediately even though in many cases netgroup matching would not
be used.
This change marks the hostname as unknown but continues. Where
netgroup matching is performed, an unknown hostname is handled
conservatively. I.e., for "+@netgroup" (accept) entries an unknown
hostname never matches, and for "-@netgroup" (reject) entries an
unknown hostname always matches.
In the lines affected (only), I also fixed a few bogus casts. There
are others, and in fact this entire file would be a good candidate
for a cleanup sweep.
Reviewed by: imp (wearing his flourescent yellow Security Team cap)
MFC after: 2 days
called <machine/_types.h>.
o <machine/ansi.h> will continue to live so it can define MD clock
macros, which are only MD because of gratuitous differences between
architectures.
o Change all headers to make use of this. This mainly involves
changing:
#ifdef _BSD_FOO_T_
typedef _BSD_FOO_T_ foo_t;
#undef _BSD_FOO_T_
#endif
to:
#ifndef _FOO_T_DECLARED
typedef __foo_t foo_t;
#define _FOO_T_DECLARED
#endif
Concept by: bde
Reviewed by: jake, obrien
disklabel.h; broken originally by 1.87 of sys/disklabel.h, which
made the split between DKTYPENAMES and FSTYPENAMES.
Someone who knows disklabel.c: do we still need DKTYPENAMES to be
defined here now?
supplied buffer in case the size of it was equal to
the number of characters the converted address consumed.
The bug occurred when converting an AF_INET address.
- Remove the SPRINTF macro and use sprintf instead.
- Do not do string formatting using sprintf(3) and a
temporary buffer which is copied when the supplied
buffer provides enough space. Instead, use snprintf(3)
and the real destination buffer, thus avoid the copy.
Reported by: Stefan Farfeleder <e0026813@stud3.tuwien.ac.at> (1)
PR: misc/41289
definitions of the functions that convert strings to numbers
and are defined by IEEE Std 1003-1.2001.
- Use ANSI-C function definitions for all of the functions
mentioned above plus strtouq and strtoq.
- Update the prototypes in the manual pages.
public prototypes of setbuf(3) and setvbuf(3) using the
'__restrict' macro from <sys/cdefs.h> to be compliant with
IEEE Std 1003.1-2001.
- Replace the K&R with ANSI-C function definitions.
- Bring the manual page up-to-date.
strftime(3) for IEEE Std 1003.1-2001 compliance and remove
excessive usage of the 'const' qualifier that was neither
present in the prototype in the publice header, nor in the
local prototype just above the function definition.
- Replace the K&R function definition with a ANSI-C one.
- Update the prototype of strftime(3) in its manual page.
concatenation and copy functions using the '__restrict' macro.
This is to satisfy IEEE Std 1003-1.2001.
- Use ANSI-C function definitions.
- Add the 'restrict' keyword to the manual pages, too.
to the function definition of strxfrm(3) in form of our
'__restrict' macro.
- Use an ANSI-C function definition for strxfrm(3).
- Change the manual page accordingly.
of our __restrict macro to the prototypes and function
definitions of inet_pton and inet_ntop.
- Use ANSI-C function argument lists.
- Adjust the prototypes in the manual page.
to cause bugs when gcc is more aggressively optimising things.
There are still problems with dtoa mentioned in the PR - maybe
Dan could suggest a patch.
PR: 40209
Submitted by: Dan Lukes <dan@obluda.cz>
Approved by: bde
MFC after: 2 weeks
(I skipped those in contrib/, gnu/ and crypto/)
While I was at it, fixed a lot more found by ispell that I
could identify with certainty to be errors. All of these
were in comments or text, not in actual code.
Suggested by: bde
MFC after: 3 days
- Make getvfsbyname() take a struct xvfsconf *.
- Convert several consumers of getvfsbyname() to use struct xvfsconf.
- Correct the getvfsbyname.3 manpage.
- Create a new vfs.conflist sysctl to dump all the struct xvfsconf in the
kernel, and rewrite getvfsbyname() to use this instead of the weird
existing API.
- Convert some {set,get,end}vfsent() consumers to use the new vfs.conflist
sysctl.
- Convert a vfsload() call in nfsiod.c to kldload() and remove the useless
vfsisloadable() and endvfsent() calls.
- Add a warning printf() in vfs_sysctl() to tell people they are using
an old userland.
After these changes, it's possible to modify struct vfsconf without
breaking the binary compatibility. Please note that these changes don't
break this compatibility either.
When bp will have updated mount_smbfs(8) with the patch I sent him, there
will be no more consumers of the {set,get,end}vfsent(), vfsisloadable()
and vfsload() API, and I will promptly delete it.
#define EDOFUS 88 /* Programming error */
This can be used to signal error situations which indicate that the
program logic or assumptions is deficient.
label updates. Biba and MLS already supported this. This permits the
userland library to submit relative updates on MAC labels, rather
than submitting an entire label to replace the current label. This
also requires changes to the MAC modules, which are forthcoming.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
variables. Both symbols are set to the same value by the linker,
and _end symbol has less chances to clash with application defined
global symbols.
alpha, ia64 and sparc64 ports already use _end, i386 is now
consistent with them.
Reviewed by: bde
Approved by: obrien
Reported by: pirzyk
currently cached data. It allows a number of nice things, like: removing
fallback code from single locale loading, remove memory leak when LC_CTYPE
data loaded again and again, efficient cache use, not only for
setlocale(locale1); setlocale(locale1), but for setlocale(locale1);
setlocale("C"); setlocale(locale1) too (i.e. data file loaded only once).
towlower() and towupper() required by ISO C90 Amd. 1.
iswascii(), iswhexnumber(), iswideogram(), iswnumber(), iswphonogram(),
iswrune() and iswspecial() have also been implemented for consistency
with the BSD extensions in <ctype.h>.
2) Move incomplete check for / in locale name from env section to
loadlocale(), add check for "." and ".." too.
It allows to check any argument, not env only.
3) Redesing LOAD_CATEGORY macro to eliminate code duplication.
4) Try harder in fallback code: if old locale can't be restored,
load "C" locale
5) White space formatting, long lines, etc.
kernel access control.
Extensions to libc to provide basic MAC label manipulation facilities
for userland. These interface will be replaced in the next month
or two with more flexible interfaces, but provide sufficient support
to allow use of the Biba and MLS policies for user applications.
libc_r wrappers to follow.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
TCP clients. The problem was that a struct netconfig returned by
getnetconfigent() was being treated as a handle for __rpc_getconf(),
which certainly isn't right.
The tirpc-99 code uses __rpc_setconf("udp")/__rpc_getconf() to find
the IPv4 udp netconfig, but our implementation of these functions
seem happy to return IPv6 entries, so we can't use them. By reverting
to the old version, we are hard-coding the name of the udp4 netid.
Tracked down by: Bakul Shah <bakul@bitblocks.com>
This will make the behavior robuster if many addresses are added
after the size estimation of storage at the first sysctl.
Reviewed by: JINMEI Tatuya <jinmei@isl.rdc.toshiba.co.jp>
MFC after: 1 week
- use strlcpy.
- snprintf can return negative value, so cope with it.
- tweak interface index on interface locals (ff01::/16).
- removed unused macros.
- removed a macro that uses only once (in a trivial context).
- explicitly say goodbye to ENI_xxx.
- constify struct afd.
Obtained from: KAME
MFC after: 1 week
- add GLOB_NOMATCH return value and use it when we don't get a match
- rename GLOB_ABEND to GLOB_ABORTED and use it instead of returning 1
in some places
- add GLOB_NOESCAPE flag and retire GLOB_QUOTE to compatibility
section
Suggestions/advice on correct usage of POSIX defines: wollman
support creation times such as UFS2) to the value of the
modification time if the value of the modification time is older
than the current creation time. See utimes(2) for further details.
Sponsored by: DARPA & NAI Labs.
It's silly to call sysctl() to get the value of _PATH_STDPATH from
<paths.h> when we can just use it directly. This greatly simplifies
the implementation. (This is also part of my grand scheme to get
rid of sysctl's `user' category, which should never have been created.)
Use strlcpy() instead of strncpy() as it has the exact semantics we want.
file descriptors does not change upon dropping privilege, and include
a likely case of `setuid(non_superuser); exec(...);'.
Sponsored by: DARPA, NAI Labs
Obtained from: TrustedBSD Project
re-read from the stack mid copy. This may help mitigate the recent
Apache buffer overrun and future overruns of the sort.
Reviewed by: jdp
MFC after: 2 days
Since they were never documented and have never appeared in a FreeBSD
release, no repo-copy of the header is done. This removes namespace
pollution from <time.h>.
condense the redundant bits.
o Provide an example for using snprintf over sprintf. This may be
supplemented with an asprintf() example soon.
Sponsored by: DARPA, NAI Labs
a format string. This will later on be changed to a reference to the
FreeBSD Security Architecture after it has been committed.
PR: docs/39320
Sposnored by: DARPA, NAI Labs
Hopefully, now it is more clear that the memory referenced by the
ptr argument of realloc(ptr,size) is freed and only the return value
of realloc() points to a valid memory area upon successful completion.
Submitted by: Martin Faxer <gmh003532@brfmasthugget.se>
__dlfunc_t to dlfunc_t to match what I have proposed to the Austin
Group. (This also makes it easier for applications to store these
values before they decide what to do with them, e.g., in a wrapper
function.)
Add new dlfunc() interface, which is a version of dlsym() with a
return type that can be cast to a function pointer without turning
your computer into a frog.
Reviewed by: freebsd-standards
The uuidgen command, by means of the uuidgen syscall, generates one
or more Universally Unique Identifiers compatible with OSF/DCE 1.1
version 1 UUIDs.
From the Perforce logs (change 11995):
Round of cleanups:
o Give uuidgen() the correct prototype in syscalls.master
o Define struct uuid according to DCE 1.1 in sys/uuid.h
o Use struct uuid instead of uuid_t. The latter is defined
in sys/uuid.h but should not be used in kernel land.
o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid()
to kern_uuid.c for use in the kernel (currently geom_gpt.c).
o Rename the non-standard struct uuid in kern/kern_uuid.c
to struct uuid_private and give it a slightly better definition
for better byte-order handling. See below.
o In sys/gpt.h, fix the broken uuid definitions to match the now
compliant struct uuid definition. See below.
o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change.
A note about byte-order:
The standard failed to provide a non-conflicting and
unambiguous definition for the binary representation. My initial
implementation always wrote the timestamp as a 64-bit little-endian
(2s-complement) integral. The clock sequence was always written
as a 16-bit big-endian (2s-complement) integral. After a good
nights sleep and couple of Pan Galactic Gargle Blasters (not
necessarily in that order :-) I reread the spec and came to the
conclusion that the time fields are always written in the native
by order, provided the the low, mid and hi chopping still occurs.
The spec mentions that you "might need to swap bytes if you talk
to a machine that has a different byte-order". The clock sequence
is always written in big-endian order (as is the IEEE 802 address)
because its division is resulting in bytes, making the ordering
unambiguous.
- Remove redundant "? :" construct.
style(9):
- Place a space after return statements.
- Compare pointers to NULL.
- Do not use ! to compare a character to nul.
a floating point instruction into a 6-bit register number for
double and quad arguments.
Make use of the new INSFPdq_RN macro where apporpriate; this
is required for correctly handling the "high" fp registers
(>= %f32).
Fix a number of bugs related to the handling of the high registers
which were caused by using __fpu_[gs]etreg() where __fpu_[gs]etreg64()
should be used (the former can only access the low, single-precision,
registers).
Submitted by: tmm
on long double, which are not implemented in hardware on any UltraSPARC
chip that I know of. This just calls into the existing floating point
emulator, which is still needed to emulate other floating point operations
in certain conditions. Without this gcc has to generate the quad floating
point instructions directly, which sometimes causes internal compiler
errors.
Reviewed by: tmm
using these to load long doubles, but they aren't implemented in hardware
on (at least) UltraSPARC I and II machines.
Emulate popc in the user trap handler as well.
Re-arrange slightly to make support functions more accessible.
Reviewed by: tmm
- New length modifiers: hh, j, ll, t, z.
Still to do:
- %C, %S, %lc, %ls (wide character support)
- %a/%A (exact hex representation of floating-point numbers)
Removed old compatability equivalents:
- %D for %ld, %O for %lo, %X for %lx, %E and %F for %le & %lf (these
were buggy anyway, since they should have represented %Le & %Lf).
- %[unknown uppercase char] for %ld, %[unknown lowercase char] for %d
Satoshi NIIMI-san kindly explained that EUC does not limit the byte length to
any arbitrary number.
We now set the limit to the maximum octet length of the codeset and it is
locale-specific.
Submitted by: Yong-Jhen Hong <winard@ms11.url.com.tw>
and add some compatibility defines. Add fields for ins and locals to
struct reg also for the same reason; these aren't filled in yet because
getting at those registers sucks and I'd rather not save them in the
trapframe just for this. Reorder struct reg to be ABI compatible as
well. Add needed include of machine/emul.h.
This gets pmdb (poor man's debugger) from OpenBSD mostly compiling but it
doesn't work yet :(
Also, make an internal _getprogname() that is used only inside
libc. For libc, getprogname(3) is a weak symbol in case a
function of the same name is defined in userland.
# This appears to not break X11, but I'm having problems compiling the
# glide part of the server with or without this patch, so I can't tell
# for sure.
over someone else's fixes; this is at least offensive. If you
have problems doing a proper merge, we are here, your fellow
committers. :-(
Reapply markup fixes from revision 1.2 and fix some more. Also
fix the $OpenBSD$ tag.
support for fcmp and fcmpe instructions with a condition code
specification other than %fcc0.
This (primarily the first part) seems to fix a lot of problems that
people were seeing, e.g. perl and gawk failures.
Reported and analyzed by: wollman
gcc emits the deprecated sparc v8 instructions that use this register
when optimizing for UltraSparc machines because they are apparetly
faster then their v9 counterpars there.
to the console in a final attempt to log something. Make this final
attempt non-blocking so that a blocking console doesn't end up
blocking process which attempt to syslog something.
In particular, this means you should be able to su and fix the
problem if the console becomes blocking.
MFC after: 3 weeks
implementation did not match our manpage description (i.e., it could
return NULL). I mistakenly thought we were still using getpass.c
because, for some reason, CVS never removed it from the tree.
Pointy hat received from: alfred
Kick in the groin to: CVS
be serialized. A mutex is used to protect the critical regions.
sbrk() and brk() are not thread safe. Replace use of sbrk() with
a call to malloc to avoid race when one thread calls atexit
while another thread calls malloc.
Reviewed by: deischen
spares (the size of the field was changed from u_short to u_int to
reflect what it really ends up being). Accordingly, change users of
xucred to set and check this field as appropriate. In the kernel,
this is being done inside the new cru2x() routine which takes a
`struct ucred' and fills out a `struct xucred' according to the
former. This also has the pleasant sideaffect of removing some
duplicate code.
Reviewed by: rwatson
deprecated in favor of the POSIX-defined lowercase variants.
o Change all occurrences of NTOHL() and associated marcros in the
source tree to use the lowercase function variants.
o Add missing license bits to sparc64's <machine/endian.h>.
Approved by: jake
o Clean up <machine/endian.h> files.
o Remove unused __uint16_swap_uint32() from i386's <machine/endian.h>.
o Remove prototypes for non-existent bswapXX() functions.
o Include <machine/endian.h> in <arpa/inet.h> to define the
POSIX-required ntohl() family of functions.
o Do similar things to expose the ntohl() family in libstand, <netinet/in.h>,
and <sys/param.h>.
o Prepend underscores to the ntohl() family to help deal with
complexities associated with having MD (asm and inline) versions, and
having to prevent exposure of these functions in other headers that
happen to make use of endian-specific defines.
o Create weak aliases to the canonical function name to help deal with
third-party software forgetting to include an appropriate header.
o Remove some now unneeded pollution from <sys/types.h>.
o Add missing <arpa/inet.h> includes in userland.
Tested on: alpha, i386
Reviewed by: bde, jake, tmm
- missing whitespace
- strange version of warn() built out of warnx() + strerror(). Just use
warn().
- conversion of just one of the two perror()'s to warn*()
Actually use _warn() instead of _warn(), to keep up with namespace-
unpollution for warn().
change prototypes to be the same as in the original sun tirpc code.
Remove ()P macro in a file where the mayority had ()P already removed.
Add them if the mayority use ()P macros.
Submitted by: mbr
Requested by: bde
server handle (for reuse or whatever). We just return now a handle
connected to the local rpcbind.
Do not try to call checkcache, if host = NULL;
Submitted by: mbr
In NetBSD, Solaris, xprt->xp_p2 pointed directly to the credentials,
in FreeBSD xprt->xp_verf.oa_base was a pointer to a struct cmessage,
which is defined as follow:
struct cmessage {
struct cmsghdr cmsg;
struct cmsgcred cmcred;
};
The credentials were submitted the right way and xprt->xp_p2 pointed to them.
But cb_verf.oa_flavor was still empty. There was an assignment missing
in svc_recv() in svc_vc.c:
msg->rm_call.cb_verf.oa_flavor = AUTH_UNIX;
Also
+ if (addr.ss_family == AF_LOCAL) {
+ xprt->xp_raddr = *(struct sockaddr_in *)xprt->xp_rtaddr.buf;
+ xprt->xp_addrlen = sizeof (struct sockaddr_in);
+ }
was missing. But the first seems not to be needed:
I guess in rpc.yppasswdd there was a typo:
- transp>xp_verf.oa_flavor != AUTH_UNIX) {
+ rqstp->rq_cred.oa_flavor != AUTH_UNIX) {
This little fix does fix the breakage in rpc.yppasswdd :-)
+ if (msg.msg_controllen == 0 ||
+ (msg.msg_flags & MSG_CTRUNC) != 0)
+ return (-1);
We cannot set the cb_verf.oa_length in svc_recv() of svc_vc.c,
the credentials get overwritten then, and that's bad.
Submitted by: mbr
were removed and replaced them with clnt_tp_create, now the af_local
support is fixed.
I also removed the hack how rpcinfo contacted rpcbind, now we can
relay on clnt_tp_create create the client-handle for us. Only
rpcbind itself needs a hardcoded socket-path.
Submitted by: mbr
Also add $FreeBSD
in conditional code that happens not to be compiled, and because gcc
doesn't complain garbage after #endif by default.
Fixed some style bugs in previous commit, 1.8 and 1.1.
commit.
Fixed related style bugs:
basename.c: misplaced '#if 0'
dirname.c: misplaced '#if 0'
getgrent.c: missing '#if 0', and tab lossage in vendor id (the previous
commit fixed the complete corruption of the vendor id but
lost a tab)
getpwent.c: missing '#if 0'
and sbrk's prototype from char *sbrk(int) to void *sbrk(intptr_t).
This makes us more consistant with NetBSD and standards which include
these functions. Bruce pointed out that ptrdiff_t would probably
have been better than intptr_t, but this doesn't match other
implimentations.
Also remove local declarations of sbrk and unnecessary casting.
PR: 32296
Tested by: Harti Brandt <brandt@fokus.gmd.de>
MFC after: 1 month
time_to_xxx() and xxx_to_time() functions. e.g. _time_to_xxx()
instead of time_to_xxx(), to make it more obvious that these are
stopgap functions & placemarkers and not meant to create a defacto
standard. They will eventually be replaced when a real standard
comes out of committee.
is correct but less than useful. There is some uncertainty about whether
isblank() is in C99, but it is certainly not in C90. It just conforms
to C89 because it is a conforming extension.
functions are defined in SUSv2 and the latest POSIX spec.
Thanks to Bernd Walter <ticso@cicely8.cicely.de> for helping debug my
alpha assembly.
Approved by: -arch
1. ctype.h defines digittoint(), isnumber() and ishexnmber(), yet
they are not documented in any of the manpages.
2. The ctype manpage references a non-existent manpage for
digittoint().
3. The isascii() manpage claims it is standards compliant, when
it isn't.
4. isblank() claims it is _not_ standards compliant, when it
is.
Fix by including the appropriate .Nm entries, and with a new digittoint.3
page.
PR: docs/26451
Submitted by: Adrian Filipi-Martin <adrian@ubergeeks.com>
alpha these bugs didn't cause any problems because it was little endian,
but on sparc64, we ended up with garbage for the IP address when we tried
to contact the server. (Usually 3.253.0.0)
Not objected to by: wpaul
data without confirming the connection by issuing a recvmsg(2) [...]".
There's no such code in the kernel.
PR: 26861
Submitted by: Richard A Steenbergen <ras@e-gerbil.net>,
Tom Rhodes <darklogik@pittgoth.com>
the first revision of strcpy(3)'s section is included, but should be
removed as the Security Architecture document is committed and
completed.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
at first and try to set an accept_filter(9) on it only after that.
Also document errno value that will be set if installing the
filter on a non-listening socket.
This will be trimmed as the FreeBSD Security Architecture document
is fleshed out and committed.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
Add support for handling floating point disabled traps mostly in userland
for the simple single threaded case. Not yet enabled by default.
Implement __sparc_utrap_install as specified by the sparc abi.
- Don't connect datagram socket if RES_INSECURE1.
- Needed to implement IPv6 anycast UDP DNS queries as documented in
<draft-ietf-ipngwg-dns-discovery-03.txt>.
Obtained from: KAME
According to C99:
"The functions atof, atoi, atol, and atoll need not
affect the value of the integer expression errno on an
error. If the value of the result cannot be represented,
the behavior is undefined."
o Document the following capabilities: CAP_NET_ADMIN, CAP_SYS_RAWIO,
CAP_SYS_ADMIN, and CAP_SYS_TTY_CONFIG.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
calls.
This change allows libc_r to create thread contexts with a different
stack and return address.
With much detective work by: Bernd Walter <ticso@cicely.de>
LC_MESSAGES related data was installed to <locale>/LC_MESSAGES file.
Now it go to <locale>/LC_MESSAGES/SYS_LC_MESSAGES file. LC_MESSAGES
directory is supposed to be storage of message catalogs of userland tools.
This should allow us to avoid many potential problems with future
libintl related functionality introduction.
Thanks for useful suggestions about correct way how to replace plain
files with directories at installworld stage to: Ruslan Ermilov <ru>
In original version grouping was hardcoded. It assumed that thousands
separator should be inserted to separate each 3 numbers. I.e. grouping
string "\003" was assumed for all cases. In correct case (per POSIX)
vfprintf should respect locale defined non-monetary (LC_NUMERIC
category) grouping sequence.
Also simplify thousands_sep handling.
more careful about reporting truncation with ERANGE in strerror_r.
Set errno to EINVAL for "unknown" errnum in strerror as required
by P1003.1-200x Draft June 14, 2001.
More carefully document the handling of strerrbuf when errors
(ERANGE, EINVAL) are encountered in strerror_r.
Reviewed by: bde (ongoing discussion)
dump core if invoked with an input file that looks like a password file
but isn't (e.g. /etc/group).
PR: 32378
Submitted by: Maxim Konovalov <maxim@macomnet.ru>
MFC after: 1 week
This API is supported in SVR4.0MP, Solaris, Linux, AIX and Tru64 Unix.
PR: bin/27489
Submitted by: Arun Sharma <arun@sharma-home.net>
Reviewed by: bde (prior version)
o Hide nonstandard functions and types in <netinet/in.h> when
_POSIX_SOURCE is defined.
o Add some missing types (required by POSIX.1-200x) to <netinet/in.h>.
o Restore vendor ID from Rev 1.1 in <netinet/in.h> and make use of new
__FBSDID() macro.
o Fix some miscellaneous issues in <arpa/inet.h>.
o Correct final argument for the inet_ntop() function (POSIX.1-200x).
o Get rid of the namespace pollution from <sys/types.h> in
<arpa/inet.h>.
Reviewed by: fenner
Partially submitted by: bde
removing it from our source tree in order to have one version
of strtod() for all arches. netbsd_strtod.c still left in source
tree until alpha folks make sure that our native strtod() works
as well as NetBSD's one.
Reviewed by: peter, bde (some time ago)
- New length modifiers: hh, j, t, z.
- New flag: '. Note that %'f is not yet implemented.
- Use "inf"/"nan" for efg formats, "INF"/"NAN" for EFG formats.
- Implemented %q in terms of %ll; if "quad_t" is not "long long"
%q will break.
Still to do:
- %C, %S, %lc, %ls (wide character support)
- %'f (thousands in integer portion of %f)
- %a/%A (exact hex representation of floating-point numbers)
Garrett Wollman wrote the first version of the vfprintf.c update;
Mike Barcroft wrote the first version of the printf.3 changes.
STANDARDS section of the page. Add one remark there about inet_pton(3)
only understanding decimal values (in contrast to inet_aton(3) and
friends who are happy with 0ac.020.25 for 172.16.0.25).
Caught by: ru
MFC after: 2 days
The definition of character class digit requires that only ten characters
-the ones defining digits- can be specified; alternate digits (for
example, Hindi or Kanji) cannot be specified here. However, the encoding
may vary if an implementation supports more than one encoding.
The definition of character class xdigit requires that the characters
included in character class digit are included here also and allows for
different symbols for the hexadecimal digits 10 through 15.
the return code and errno instead. Those warnings did not do any good
for daemonized users of initgroups(3), and confused cvs clients that
communicated with non-root cvs pserver.
The committed fix differs from the one suggested in the PR, and was
submitted by ru.
PR: 15421
Approved by: markm
Discussed on: -stable, -current at various times
offsets don't work. It should really be documented that the returned
pointer can be in the middle of a fully-valid page when the offset
is not page-aligned, but I couldn't come up with suitable wording.
PR: kern/22754
