obj dir is only indirectly related to the location of libtxi.a's obj
dir).
Fixed about 3 style bugs in previous commit.
Fixed my bug in rev.1.7. "../../Makefile.inc" worked as an alias for
"../Makefile.inc" in some cases, but it gives endless recursion when
there is an obj dir in one of the subdirs.
version of makeinfo must be used. The fix breaks bootstrapping of
texinfo by a simple `make' in the texinfo directory -- `make world'
must be used to bootstrap it if you don't know how to do it manually.
Fixed at least 7 style bugs in previous commit.
than ".so". The old extension conflicted with well-established
naming conventions for dynamically loadable modules.
The "clean" targets continue to remove ".so" files too, to deal with
old systems.
o make install ; make install now works
o make all ; make all is quiet the second time
o Dependancies are properliy debugged; this means that make -jN has a
far hihjer likelyhood of working.
o a proper 'link farm' has been constructed for the build. This
dramatically simplifies the dependancy tangle.
o for perldoc's use, all the .pod files are installed.
o the man3 docs are properly compressed.
o the man pages and libary code are installed by the makefiles, not
by a perl script.
o at the end, h2ph is run.
are installed in the same place as on 2.2.*; this will almost
certainly change in the future.
While I'm here, finish off the shared library brouhaha with miniperl.
1) Part of the NOSHARED fix; I messed this up and managed to get
perl installed without being linked to the shared library libperl.so.
This broke Perl in ELF when linking in shared objects.
2) Start of a cleanup of the man3 page location. This will (eventually)
allow for a the ports to put their pages in the "normal" ${PREFIX}-
based location.
3) Nuke cruft.
1) Inspired by JB's finding of a hardcoded /usr/bin/ranlib in the
config files, these have been properly cleaned up and have
been personalised for FreeBSD, not MarkM.
2) Inspired by Peter, copying of the lib/ext etc dirs has been
replaced by a link farm.
3) Common code has been moved to a higher-level Makefile.inc.
This has been tested with a make -j8.
Remove the /usr/bin path to ranlib and just let the build environment
set the path. Running an aout version of ranlib on an elf library
is something we'd prefer not to do. I'm surprised that the build
didn't spit any errors when it did this. Shrug.
1) Fix up the NOSHARED stuff (bde)
2) Accomodate CFLAGS (vanilla)
3) Provide separate files for i386 and alpha (Doug Rabson)
In case 3, the supplied files were corrupted, but the concepts
sound enough, so I just copied what exists into
config.SH-{elf|aout}.{i386|alpha}. Alpha team, go ahead and do what
is necessary on config.SH-elf.alpha. :-)
(Tested by make -j12 buildworld on a 4-cpu SMP box).
Address (but not solve) ELF shareable objects causing perl to
dump core. (I have a heck of a lot to learn about ELF).
Lots of help by: bde, jkh, jb and others
before it is installed.
This upsets Bruce because the host boostrap build forces tools to be
static anyway. He says I'm abusing NOTOOLS in src/Makefile by using
it to do a aout->elf transition build. One day I'll find a place to
install host tools like these to allow a true cross build.
can be used to select them. The purpose of this is not necessarily to
allow another host format, but to allow us to use the objformat trickery
for cross compilation.
tar now exits with new exit code EX_BADDIR after a failed chdir()
in name_next(), name_match(), and name_from_list().
PR: bin/2394
Submitted by: Satoshi Asami <asami@freebsd.org>
name of entry points, functions, subroutines, and program to
stderr error. The enclosed patches do 3 things:
(1) Silenced the output to stderr.
(2) Added a -v option to f2c and f77. This will turn on a verbose
mode, and dumps quite a bit of stuff to stderr.
(3) Updated the f2c man page.
PR: 7369
Submitted by: Steven G. Kargl <kargl@troutmask.apl.washington.edu>
`-C' can be used both when creating and extracting files. Further,
a `-C' inside the argument list causes a `chdir()' to the named
directory before the subsequent filename arguments to be interpreted.
Eg:- "tar -cf a+b.tar -C /a . -C /b ."
PR: 7221
`XCC= <relative cc> -B<path to relative cc1> ...'. This is equivalent
when cc and cc1, etc. have just been bootstrapped by `make world'.
The relative versions normally won't work if the target system is
not binary compatible. Bootstrapping different versions of gcc
without going through `make world' is slightly more broken than
before.
Uniformized macro names (P1OBJS -> LIB1POBJS, etc.).
Don't give full paths to sources.
They have been bootstrapped by `make world' since long before the
hacks here were cloned from ../libgcc/Makefile. The versions just
built in "../*" normally won't work if the target system is not binary
compatible.
Don't use OBJS to defeat `make depend'; just put generated sources in
SRCS.
Added temporary files to CLEANFILES.
bootstrapped by `make world'. The version just built in ".."
normally won't work if the target system is not binary compatible.
The bootstrapped version has a better chance of working.
This makes the fixes and bugs in the previous 3 commits irrelevant.
Rev.1.11 was just wrong and rev.1.10 became unnecessary when
perl/perl was added to build-tools. Don't expect to build perl/usub
without using `make world' or equivalent if you don't have perl
installed.
was already put in SRCS by the general yacc rules. Putting ldemul-list.h
in SRCS fixes races in `make -jN' when .depend hasn't been made.
Don't forget to clean ldemul-list.h.
Move a.out libraries to /usr/lib/aout to make space for ELF libs.
Make rtld usr /usr/lib/aout as default library path.
Make ldconfig reject /usr/lib as an a.out library path.
Fix various Makefiles for LIBDIR!=/usr/lib breakage.
This will after a make world & reboot give a system that no
longer uses /usr/lib/*, infact one could remove all the old
libraries there, they are not used anymore.
We are getting close to an ELF make world, but I'll let this
all settle for a week or two...
Move our old a.out utils to /usr/libexec/aout.
Enable binutils and put the utils in /usr/libexec/elf
Enable objformat, a little helper program that calls the right
utils based on /etc/objformat and $OBJFORMAT.
This will enable the ELF generating tools.
Remember that this is only step one, the system is still compiled
and run in a.out format ONLY.
Problem left to solve: The BSD manpages wins over the GNU equivalents
as the are installed last. We need to distinguish between the manpages
somehow...
CURDIR it has been built without an obj directory; however if it is in
neither of those places, we expect it to be in DESTDIR.
Yes Bruce, I know this is broken because the host is not supposed to be
the same as the target, but we need to get the hosted build working
properly first before even attempting a cross compiled operating
system build. That will need to concept of TOOLSDIR or something that
can be mapped to DESTDIR in the case of a hosted build and set to the
installed tools in a cross compiled build. Later, later, later!
perl executable from overriding the object directory path search where
perl is most likely to be. Most people haven't seen this because it
defaulted to /usr/bin/perl which might be OK as a fallback, but when
bootstrapping a new version (or the *first* version on alpha), we don't
really want to use /usr/bin/perl.
kernel's) curproc is null. This fixes endless recursion in
xfer_umem() for attempts to read from user addresses, in particular
for attempts to read %fs and %gs from the pcb for `info reg'.
gas for each target format. So for m68k targets that means several
gases. I wanted a m68k gas for VxWorks which uses aout in sun3 big
endian format, cross compiled on i386 under FreeBSD using libraries
supplied by DEC and intended by them for cross compilation on Alpha
under OSF/1. And it actually works!
support more than one architecture at a time, build as from the
default for the host and if CROSS_TOOLS defines other architectures,
build them as as_${arch}
are now included according to the cross-architecture support required,
default the BINDIR for i386 to /usr/libexec/elf here instead of in
all the i386 specific makefiles. For all other architectures, BINDIR
is just /usr/bin.
be defined (in /etc/make.conf, say) and set to the additional architectures
that need to be compiled in. So on alpha I set CROSS_TOOLS = i386.
On i386 you can't build alpha due to lack of 64-bit support on 32-bit
architectures, but that's a GNU problem.
This change relies on makefiles in the binutils sub-directories having
the extension defined in the CROSS_TOOLS, instead of those makefiles
being selected based on the host architecture.
worked because .ORDER prevented problems from concurrent generation
of multiple parsers (and their headers), and there were no missing
dependencies because the generated headers were not actually used.
with `make -jN' because they did the right things to generate cexp.h
without clobbering cexp.c, and there were no missing dependencies on
cexp.h because cexp.h isn't actually used.
Fixed style bugs.
bsd.man.mk doesn't include ${.CURDIR}/../Makefile.inc.
Removed GDBDIR-redefinition-prevention ifdef. It hasn't done anothing
for a long time, if ever. The directory is defined to the same value in
each subdir and had the same value because all subdirs are at the same
level. Keep defining it in the subdirs since that is more flexible and
no more verbose.
Prepare to inherit BINDIR by including ../Makefile.inc.
requires the new file.
Fixed stale near-copy of contrib/libreadline/doc/hsuser.texinfo. Patch
it at build ntime, and only keep the patch for it here.
Don't keep a copy of contrib/gdb/gdb/doc/all-cfg.texi here. Link to it
at build time.
Fixed stale near-copy of contrib/libreadline/doc/hsuser.texinfo. Patch
it at build ntime, and only keep the patch for it here.
Don't keep a copy of contrib/gdb/gdb/doc/all-cfg.texi here. Link to it
at build time.
$Id$ should be preceded by a tab
Don't include ../Makefile.inc when it is not used explicitly
Use the normal amount of horizontal and vertical whitspace (1 tab/none)
Don't override the (correct) default for MAN1
Use the correct order for -I paths
Use config.h generated by `configure', don't use a huge CFLAGS statement
Enable useage of libreadline in config.h, configure didn't enable it itself.
- Makefiles shouldn't have copyrights.
- $Id$ should be preceded by a tab.
- Don't include ../Makefile.inc when it is not used explicitly.
- Use the normal amount of horizontal and vertical whitspace (1 tab/none).
- Don't override the (correct) default for MAN1.
- Use the correct order for -I paths.
- Don't use += to initialize SUBDIR.
- use the config.h generated by `configure' and don't use a huge
CFLAGS statement.
I think the other Makefiles under src/gnu needs some polishing as well ;-)
Thanks to Bruce, everythig looks smarter now.
Obtained from: Bruce Evans <bde@zeta.org.au>
on bi-parser.h. Not having it sometimes (only with `make -j') triggered
a bug suite that led to ordinary cpp output being put in .depend files.
Various bugs (the main one only with `make -j') prevented timely detection
of failure to build and install gnu/usr.bin/cc. Eventually the missing
${WORLDTMP}/usr/libexec/cpp caused ${WORLDTMP}/usr/bin/cpp to be invoked
by cc, and this version of cpp is not suitable for such invocation.
Ordinary cpp output was put in .depend files when cpp terminated options
processing before seeing the -M flag.
Cleaned up.
magic number byte ordering for FreeBSD. This makes "file" describe
our object files as "FreeBSD/i386 object" instead of as NetBSD
object files. In case this seems drastic and risky, Bruce points
out that the "ld -r -x" step that is done on every object file when
building libraries fixes the byte ordering in the same way. I have
been running with this patch for over a month and have seen no
problems.
With -O3, egcs generates such forward references.
PR: gnu/6055
Reviewed by: jdp
Submitted by: Dmitrij Tejblum <tejblum@arc.hq.cti.ru> in slightly different form
be worth much effort. Install all i386 binutils programs in
"/usr/libexec/elf". Disable a.out support in libbfd. It's too
dangerous to leave it in. Some of the utilities think they can
handle a.out, but they generate bad object files.
These are equivalent to "fildq" and "fistpq" respectively. This
fixes the bad floating point object code that resulted after recent
changes in the compiler.
Test driven by: "Mike Burgett" <mburgett@awen.com>,
Amancio Hasty <hasty@rah.star-gate.com>
last fix of this type. Installing from a read-only object tree should
work now.
Install files using a single install command where this is easy; don't
use shell loops.
Don't use MANDEPEND to complicate things.
the source files. E.g., the stale version of locate.cc in the
source directory was sometimes used. We didn't even use beforedepend.
Added temporary files to CLEANFILES.
Fixed some style bugs.
generated source files in SRCS.
Don't use MANDEPEND to complicate things. Just put the generated
man page in CLEANFILES.
Partly fixed yacc header brokenness, as in ../eqn/Makefile.
Added temporary files to CLEANFILES.
Fixed some style bugs.
generated source files in SRCS.
Don't use MANDEPEND to complicate things. Just set MAN1 and put
generated man pages in CLEANFILES.
Added temporary files to CLEANFILES.
Partly fixed a potentially fatal bug involving the yacc header.
We generate eqn.cc (even if there is a version of it in the source
directory older than eqn.y) and a matching eqn.tab.h, but only use
the possibly-non-matching eqn.tab.h in the source directory. This
works because Cygnus's yacc happened to generate a y.tab.h identical
to the current generated one. The correct version will be used
when the wrong version is deleted from the source tree. Kludge to
get the header generated early enough. Yacc headers are mishandled
everywhere they are renamed (and used).
Generate neqn at build time, not at install time.
Fixed some style bugs.
target. .ORDER doesn't work right, but is used for things related
to the depend target. It "works" for the depend target by skipping
the build of .depend when N >= 2 and there is a non-default
beforedepend target with no rules. Recent fixes made almost all
the beforedepend targets in the tree a no-op except for this bug.
Removed vestiges of elf and aout targets.
the binutils headers for (machine)-unknown-freebsdelf.
Also copy the bfd.h header to an architecture specific directory
because there are two fundamental lines that differ (32-bit vs 64-bit)
between i386 and alpha.
The config.h for libbinutils generates the same on alpha as i386,
so I didn't change that (though I was tempted!).
support building it for variant architectures. It was already
becoming clear that the former structure was too rigid and didn't
scale well.
The usual sort of makefile magic arranges to .include an architecture
specific makefile "Makefile.${MACHINE_ARCH}" in each directory
where it exists. Also, sources will be found in each subdirectory
"${MACHINE_ARCH}" that exists. This is all taken care of automatically
by the top level "Makefile.inc0".
This all seems to work right for the i386 now. I have also converted
those alpha pieces already present to the new schema as best I
could.
Also: change the BINDIR on the i386 to /usr/libexec/elf for "ar"
and "ranlib". They are not object format independent enough to
put into /usr/bin.
a.out gas and the binutils gas (elf or a.out) with a single compiler.
This uses other infrastructure not yet committed, in order to support
both a.out and elf it needs to be able to get to both a.out and elf
gas, ld, libs, crt* etc. So for now, the support is pretty much dormant.
The new freebsd.h file is based on the old freebsd-elf.h file (which has a
long lineage, right back through linux and svr4 files). The change is
pretty dramatic from a gcc internals standpoint as it overrides a lot of
definitions in order to generate different output based on target mode.
There is potential for screw-ups, so please be on the lookout - gcc's
configuration mechanism wasn't really meant for this kind of thing.
It's believed to compile world etc just fine under both a.out and elf, can
handle global constructors and destructors, handles the differences in
a.out and elf stabs, and what sections things like exceptions go in.
The initial idea came from i386/osfrose.h which is a dual rose/elf format
target. These two are not as diverse as a.out and elf it would seem.
The cc front-end uses external configuration to determine default object
format (still being thrashed out, so read the source if you want to see
it so far), and has a '-aout' and '-elf' override command line switch.
There are some other internal switches that can be accessed, namely -maout,
-mno-aout, -munderscores and -mnounderscores. The underscore and local
symbol prefixing rules are controllable seperately to the output format.
(ie: it's possible to generate a.out without the _ prefixes on symbols and
also to generate elf with the _ prefixes. This isn't quite optimal, but
does seem to work pretty well, except the linkers don't always recognise
the local symbols without their normal names)
The default format is a.out (still), nobody should see any major changes.
With both elf and a.out tools and libraries installed:
[1:26pm]/tmp-223> cc -elf -o hello hello.c
peter@beast[1:27pm]/tmp-224> file hello
hello: ELF 32-bit LSB executable, Intel 80386, version 1 (FreeBSD), dynamically linked, not stripped
[1:27pm]/tmp-225> ./hello
hello world!
[1:27pm]/tmp-226> cc -aout -o hello hello.c
[1:27pm]/tmp-227> file hello
hello: FreeBSD/i386 compact demand paged dynamically linked executable not stripped
1:27pm]/tmp-228> ./hello
hello world!
Since my co-conspirators put a lot of effort into this too, I'll add them
so they can share the blame^H^H^H^H^Hglory. :-)
Reviewed by: sos, jdp
libraries so that `ld -f' in can create correct dependencies for
yet-to-be-built libraries.
Get the default BINDIR correctly (by including ../Makefile.inc recursively.
objects depend on all generated headers doesn't work because it gives
cyclic dependencies. Give enough dependencies explicitly. We no
longer need to use .SINGLESHELL for `make depend'. .SINGLESHELL was
more of a bottleneck than usual because `make depend' makes everything.
Fixed some spelling and English errors.
${SRCS} instead of giving inadequate explicit dependencies. There
is still a problem after `make depend; make clean'. Then `make'
barely works, and `make -jN' is confused by absolute paths in
.depend.
strip program (via "install") to strip itself. But the program
wasn't executable because "install" hadn't made it so yet. I
borrowed the method used for the old strip to get around this.
This finishes up the binutils import. But I am leaving it disabled
in "src/gnu/usr.bin/Makefile" for now. It is not used by anything
yet, so I'll take this opportunity to run one more round of tests
before enabling it.
*replace* the SUBDIR list in that case, you want to augment it.
Also move a stray .endif to its proper location. Heh, no wonder my
release builds were falling over! ;)
0xefbfe000) and kernel_start (normally 0xf0100000).
Things are unnecessarily (?) difficult because procfs is used to
access user addresses in the live-kernel case although we must have
access to /dev/mem to work at all, and whatever works for the
dead-kernel case should work in all cases (modulo volatility of
live kernel variables). We used the wrong range [0, kernel_start)
for user addresses. Procfs should only work up to VM_MAXUSER_ADDRESS,
but it bogusly works for reads up to the address 2 pages higher
(the user area, including the kernel stack, is mapped to where the
user area used to be (WTUAUTB)). Procfs can not work at all for
addresses between WTUAUTB and kernel_start.
Now we use procfs only to access addresses up to VM_MAXUSER_ADDRESS.
Higher addresses are translated normally using kvtophys(), so the
user ptd is used for addresses below the real kernel start (0xf0000000;
see INKERNEL()) and nothing is found WTUAUTB.
Strange accesses that cross the user-kernel boundary are now handled,
but such ranges are currently always errors because they necessarily
overlap the hole WTUAUTB.
Short reads are still not handled.
Correct translations would have been null. However, kstack was
the top of the kernel stack instead of the base of the kernel stack
like it was when the kernel exported it, so the area above the
kernel stack was mistranslated and the kernel stack was not
translated. This bug was depended on to compensate for the wrong
value of kstack - to read the pcb, instead of just using the address
of the pcb, we used the mistranslated address of kstack, which
happened to be the same (curpcb = kstack - 0x2000).
This area is simpler than it used to be now that the kernel stack
address is per-process. The code still seems to be more complicated
than necessary - the `found_pcb == 0' case seems to be unused.
gdb was cloned from the buggy version of kvm_uread() in libkvm and
had the same bugs. It looped endlessly on EOF and checked errno
without setting it in the lseek() error check. The first bug caused
gdb to loop endlessly for reads from addresses between the end of
the user area and the start of the kernel text. kvm_uread() should
not be used for addresses beyond the end of the user area, but is
due to bugs elsewhere.
the previous frame is in the usual place even for traps, interrupts
and syscalls in the kernel, because the assembly language stubs
don't change the frame pointer. The previous frame is just not for
the calling function. We may as well depend on this as on magic to
determine the trap frame address. The magic is in FRAME_SAVED_PC()
which elides the correct number of stubs (1) to go back to a pc that
matches the previous frame.
Removing fbsd_kern_frame_chain() fixes bugs in it. Xsyscall was
misspelled as _Xsyscall (gdb removes one leading underscore), so
the tf_syscall frame type was never found. This was harmless
because tf_normal works in all cases in fbsd_kern_frame_chain()
and Xsyscall is spelled correctly in fbsd_kern_frame_saved_pc()
where it matters. There were style bugs on almost every line,
starting with a primary indent of 7.
machine independent, with the only dependency being the binary format
to build. We only expect to build ELF on alpha although we'll need
ECOFF compatibility with Digital Unix.
reduces to a relocatable symbol plus an offset. This preserves
the symbol type information (function vs. object). It is important
for SVR4-style weak symbols, e.g., "#pragma weak foo=bar". Without
this change, the linker complains that the jmpslot entry is not a
function.
Submitted by: Robert Eckardt <roberte@MEP.Ruhr-Uni-Bochum.de>
Sundry man page fixes; handle Central European Summer Time (CEST);
usage fixes in line with man page fixes.
It maybe right, if patch was FreeBSD-own program, but it break compatibility
with pre-existent patches in other systems.
The example is big ncurses patch which don't apply on FreeBSD
due to "fixed" precedence.
confused when they can't find it), but leave the reference to it
as being a standard filename (which doesn't imply that it exists).
Discussed with: jkh
Enabled this new feature with the makefile variable GREP_LIBZ. If
you don't like it, compile with `make GREP_LIBZ='.
grep + zlib has several advantages:
- the shell script zgrep(1) will be basically a one line
exec grep -Z "$@"
- no shell script, no bugs. The current zgrep implementations
have many bugs and some grep options are no supported.
- no shell script, no security risks.
- it is a magnitude faster than a shell script
Also fixed:
0 -> STDIN_FILENO
Close a file descriptor only if the open call was successfully. It does
not hurt for the open(2) function, but the gzclose(3) function
died in free() to free up (not) allocated memory.
following "panic:" or "Fatal trap". `panicstr' is still printed,
although it is redundant if there is a valid message buffer and
incomplete if it contains `%'s. I think the awk command belongs
here and not in a script since a standard format with complete
messages is good for bug reports.
emacs a.out file, self-generated by emacs's "unexec" function in
"unexsunos4.c", is invalid. In particular, its "_end" symbol has
the wrong value. The dynamic linker was using the value of that
symbol to initialize its sbrk break level.
The workaround is to peek at the executable's a.out header in
memory, and calculate what "_end" should be based on the segment
sizes.
I will work out a fix for emacs and send it to the FSF. This
dynamic linker workaround is still worthwhile, if only to avoid
forcing all emacs users to build a new version.
Note: xemacs gives a bogus warning at startup, for related reasons.
The warning is harmless and can safely be ignored. I will send a
patch to the xemacs maintainers to get rid of it, and meanwhile
add a patch file to our port.
things so that it uses the same malloc as is used by the program
being executed. This has several advantages, the big one being
that you can now debug core dumps from dynamically linked programs
and get useful information out of them. Until now, that didn't
work. The internal malloc package placed the tables describing
the loaded shared libraries in a mapped region of high memory that
was not written to core files. Thus the debugger had no way of
determining what was loaded where in memory. Now that the dynamic
linker uses the application's malloc package (normally, but not
necessarily, the system malloc), its tables end up in the regular
heap area where they will be included in core dumps. The debugger
now works very well indeed, thank you very much.
Also ...
Bring the program a little closer to conformance with style(9).
There is still a long way to go.
Add minimal const correctness changes to get rid of compiler warnings
caused by the recent const changes in <dlfcn.h> and <link.h>.
Improve performance by eliminating redundant calculations of symbols'
hash values.
Implemented reading of %fs and %gs from core files.
Print weird floating point values better. We have to convert long
doubles to doubles here because of limitations and bugs in printf()
and floatformat_to_double() (long doubles aren't really supported
and naive converion to double causes exceptions). Conversion loses
information about weird formats (everything becomes a quiet NaN),
and printf() doesn't know about different types of NaNs anyway.
plain 0 should be used. This happens to work because we #define
NULL to 0, but is stylistically wrong and can cause problems
for people trying to port bits of code to other environments.
PR: 2752
Submitted by: Arne Henrik Juul <arnej@imf.unit.no>
Bring the style of sods.c into better conformance. Add code to
print the contents of each datum being relocated. Correct the logic
that distinguishes between programs, shared libraries, and object
files. Make the entire program "-Wall" clean.
file based on the previous list of directories stored there which
should overcome a weakness of the '-m' switch which can only add
libs. This is an ideal way of updating the hints list after adding
or removing a shlib since it will remove entries that are gone and
doesn't need to have all the directories spelled out each time.
(eg: rm -f /usr/lib/libtcl75*; ldconfig -R) This only works for
version 2 hints files (which we've been generating for a year or
so) which store the path.
reference to the programming manual. Use this near-copy of the version
of hsuser.texinfo in contrib/libreadline instead of the stale near-copy
in contrib/gdb.
Add a -Bforcedynamic option which generates a dynamic object even
if no shared libraries were given in the link.
Make RRS in text section warnings conditional on "-assert pure-text"
so that I can link non-PIC kernel modules without tons of link
errors. Changes to bsd.lib.mk to follow.
Fix a couple of bugs exposed by the fact that the kernel is not
linked at zero.
Reviewed by: jdp
take the easy way out and implement the beginnings of something similar.
Don't worry, the code here is *dormant* so far, some "help" from cvs is
required. This is going in now so that jdp can see what I'm working on.
This is an extension of the previous existing skeleton $FreeBSD$ code.
because 2 references to _initialize_kcorelow (the other one
from kvm-fbsd.c) resulted. This prevented gdb from working correectly.
delete kcorelow.c from XSRCS in the Makefile.
punning the pcb to an array of ints and using magic indices to
access values in it. This should prevent silent breakage from
changes in the pcb.
Supply 0 for unavailable registers instead of punning the tss to
an array of ints and using magic indices to access garbage values
in it. (The registers are in the pcb; there is nothing interesting
in the tss. This should change someday. At least for dumps, all
the registers should be saved, and common_tss is a good place to
put them.)
Removed ancient wrong (disabled) method for reading eip.
sense to have a weak symbol that is not externally visible. This
fixes many of the "relocation burb" warnings produced when compiling
C++ code with "-fpic". Beyond eliminating warnings, it also makes
some things work that didn't work before.
(ignored :-() errors for `make depend' in /sys/i386/boot/*. It's
natural for there to be no libraries there and inconvenient to check
for this in bsd.prog.mk.
ld-specific flags. LDFLAGS is really for ld-related flags for cc,
not for ld, and some flags, e.g., -Bshareable, mean completely
different things to cc and ld. Having the wrong things in LDFLAGS
also broke the standard ${PROG} target. This was kludged around
by using a special rule that depended on LDFLAGS being bogus.
Fixing `make depend' broke the special rule but fixed the standard
rule (except in the DESTDIR case, which was handled more strictly
here than elsewhere).
dependency on `bar' is very unlikely to be correct.
This is a quick fix for broken dependencies in gdb and many other
places. The dependencies on internal libraries are now missing
instead of wrong when `make depend' is run before the libraries
are created.
directory. config.h is always in the current (= object) directory,
so don't search for it.
config.h is not a source for the library, so don't put it in SRCS and
don't make the library depend on it.
Don't put unused flags in CFLAGS.
Simplify using INTERNALLIB*.
- LDADD was wrong for non-uniform obj trees.
- DPADD was wrong for separate obj tres.
Cleaned up nearby messes, mostly ones invoving paths:
- ../libtxi was useless.
- there were too many redefinitions and too many different names for the
same paths.
- use INTERNALLIB* to simplify libtxi/Makefile.
- LDADD was wrong for non-uniform obj trees.
- DPADD was wrong for separate obj tres.
Cleaned up nearby messes, mostly ones invoving paths:
- -I../libtxi was useless.
- there were too many redefinitions and too many different names for the
same paths.
- use INTERNALLIB* to simplify libtxi/Makefile.
UPAGES layout.. it was entirely too comfortable with reading and writing
the U area before. I've changed it to use PT_GETREGS/PT_PUTREGS
ptrace ops instead of READ_U etc. The code to read the registers from
core dumps is a bandaid at best. It seems to have problems reading
core dumps from dynamic linked executables still, but at least static
dumps work.
I desperately need help from a gdb/bfd expert. :-) HELP!!
of binutils. For all architectures and object file formats,
".p2align n" aligns to the next multiple of 2**n. Thus for FreeBSD,
it does exactly the same thing as the traditional ".align".
The old ".align" directive has different meanings in different
object formats, and even in different variants of a.out. Sometimes
is aligns to a multiple of n, and other times it aligns to a multiple
of 2**n. ".p2align" is preferable for use in assembly language
sources, since it makes them more portable to object formats other
than a.out.
Strong 2.2 and 2.1.x candidate. Someone should review the patch before,
however.
The maintainer of the Perl5 port should probably introduce a similar patch
there.
"%%" in format strings and tends to dump core for "%%st". I needed
"%%st" to fix the new gdb ...
Don't use the private version of strerror() either.
Use INTERNALLIB and INTERNALSTATICLIB instead of a private install
rules NOPROFILE and NOPIC. This is only slightly cleaner.
INTERNALLIB was previously only used in compatibility libraries
(libgnumalloc etc.) and INTERNALSTATICLIB was previously unused.
INTERNAL*LIB probably should be replaced by something like NOSTATICO
together with NO{STATICO,PROFILE,PIC}INSTALL.
controlling terminal is closed. Now the function ask() will return 1 when th
input is known to come from a file or terminal, or it will return 0 when ther
was a read error.
Modified the question "Skip patch?" so that on an error from ask it will skip
the patch instead of looping.
Closes PR#777
2.2 candidate
library with a shared object dependency that contained alias symbols,
the linker incorrectly counted the number of symbols that would be
written, resulting in a fatal internal error. Since our libc now
contains some alias symbols (in "net/res_stubs.c"), this was
sufficient to tickle the bug: "ld -Bshareable foo.so -lc". To
fix it, I moved the accounting of alias symbols to a later point
in the processing, where it is possible to count only those symbols
that will actually be written to the output file.
This fix is well-confined to affect alias symbols only. I have
tested it with a full "make world". I am going to merge it into
-2.2 after a few more days of living with it in -current.
If it is set to a nonempty string, then simply skip any missing
shared libraries. This came up in a discussion long ago as a
potentially useful feature at sysinstall time. For example, an
X11 utility could be used without the X libraries being present,
provided the utility had a mode in which no X functions were actually
called.
by the -DNO_MMALLOC flag in gdb/Makefile.
The one thing we lose by doing this, AFAIK, is the possibility of using
mmap. Does anyone use that feature at all ?
2.2 candidate ?
files using the texi sources in /usr/src/contrib/gdb/gdb/doc.
I put a pointer to /usr/src/contrib/libreadline/doc into
Makefile.inc in the hope that the appropriate files would be
picked up.
This is based on /usr/ports/devel/gdb.
2.2 candidate ?
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
nonempty string, then function calls are relocated at program start-up
rather than lazily. This variable is standard on Sun and SVR4 systems.
The dlopen() function now supports both lazy and immediate binding, as
determined by its "mode" argument, which can be either 1 (RTLD_LAZY) or
2 (RTLD_NOW). I will add defines of these symbols to <dlfcn.h> as soon
as I've done a little more checking to make sure they won't cause
collisions or bootstrapping problems that would break "make world".
The "LD_*" environment variables which alter dynamic linker behavior are
now treated as unset if they are set to the empty string. This agrees
with the standard SVR4 conventions for the dynamic linker.
Add a work-around for programs compiled with certain buggy versions of
crt0.o. The buggy versions failed to set the "crt_ldso" member of the
interface structure. This caused certain error messages from the
dynamic linker to begin with "(null)" instead of the pathname of the
dynamic linker.
nonempty string, then function calls are relocated at program start-up
rather than lazily. This variable is standard on Sun and SVR4 systems.
The dlopen() function now supports both lazy and immediate binding, as
determined by its "mode" argument, which can be either 1 (RTLD_LAZY) or
2 (RTLD_NOW). I will add defines of these symbols to <dlfcn.h> as soon
as I've done a little more checking to make sure they won't cause
collisions or bootstrapping problems that would break "make world".
Change CATMODE to 0644, because group man not used
Add immutable sbit to man binary, so if user even got man uid,
he can't replace man binary with fake one
Should go to 2.2
Submitted by: Marc Slemko <marcs@znep.com> with small editing by me
the system with these (and the mh port doesn't install there either).
Comment out /usr/X386/bin in MANPATH_MAP, it is already commented out
in MANDATORY_MANPATH.
2.2 candidate, I guess. I can't even imagine why these stuff were
still there!
peeking inside of Chris Torek's stdio library internals. This is
similar to the code used for other systems, but didn't work on CT's new
implementation.
Submitted by: Gary Kline <kline@tera.com>
link to another file which has a long (>=100 char) name. When listing such
an archive, the name of the link is truncated to 99 characters, and when
extracting such an archive, an error is reported because it is trying to
create a hard link to a file which doesn't exist. This patch fixes that
problem and has also been sent to the GNU maintainers.
Closes PR#1992
Submitted-By: David Dawes <dawes@landfill.physics.usyd.edu.au>
that is stored in the hints file. If that search path contained
a non-existent directory (one, say, that had been removed), and
"ldconfig -m /a/perfectly/good/directory" was run, ldconfig returned
an error status without printing an error message. This caused
some confusing bombs when installing ports, in particular.
I changed it so that non-existent directories from the stored search
path are silently ignored. Only non-existent directories named
explicitly on the command line are treated as errors. Also, a
diagnostic is printed if and only if an error status is returned.
In an unrelated fix, ldconfig now silently ignores any directories
named on the command line when the "-r" option is given. Formerly,
these directories incorrectly made their way into the "search
directories" line of the listing. It really should be an error to
specify directories together with "-r", but I don't have time to
fix the manual page in that way right now.
2.2 Candidate.
Reinstate the ability to use directories as input files
and make dc print an error message when trying to
lookup/set the value of an invalid register.
Suggested by: bde
instead of decimal. Also, don't use the `l' modifier for something
that has just been cast to `int' anyway.
Remove various bogus pathnames to look up rsh(1) at. Our rsh is in
/usr/bin, but never in /usr/usb, nor would it ever be called remsh...
Also, if it hasn't been found there, use execlp() to look it up. the
latter is required for `weird' environments like a fixit floppy where
the regular /usr/bin hiearrchy is not avaiable. tar should probably
do it similar to dump/restore, and use rcmd(3) instead of forking an
external process.
1) add Garrett Wollman's trap frame resolving mods
2) make the `proc' command (kernel debugging) really work
3) allow use of a pid with the `proc' command (previously you had to
provide the address of the proc structure)
Unfortunately, the `proc' command won't work while doing remote debugging.
the main program, report them directly from the dynamic linker and die
there, rather than returning an error message to crt0.o. This enables
the printing of error messages even for old executables, whose version
of crt0.o is not able to print them.
This fix closes PR bin/1869.
The code in crt0.o for printing error messages from the dynamic linker
is no longer used, because of this change. But it must remain, for
backward compatibility with older dynamic linkers.
. remove the blubber about `submitter-id's from the man page, we don't
use them,
. use REPLY_TO or REPLYTO in preference over LOGNAME as the value for
the Reply-To address (closes PRs 1471 and its duplicates 1472 and 1823),
. don't abuse ~/.signature as ORGANIZATION, this is almost always
useless blunder,
. actually list the Categories again, instead of xrefing to ``see
above'' (closes PR 1835),
. check the Synopsis field for being not empty,
. make the mail Subject the same as Synopsis if left blank (closes
PR 1209).
The remaining open send-pr related PRs (184 and its duplicate 1047,
and 1415) are pilot errors or local hardware problems.
it's and useful. (Ever tried to read 'nm' and 'ldd -v' output on a c++
object or library? :-) This filter decodes the mangled symbol names.)
Requested by: Chuck Robey <chuckr@glue.umd.edu>
opened. After that, the directories are already present, and there is
no point in adding them again. This doesn't fix any bugs; it's just for
efficiency.
libg++'s exception code causes gcc to generate (ahem!) non-conventional
assembler code in -fpic mode that gas and ld choke on. Basically, gas
and ld require than symbols referenced in the GOT (global offset table)
are actually global (as the name implies). It attempted to work around
it before, but didn't quite go far enough to prevent a core dump in ld.
This hack causes GOT referenced symbols to be forced global. This
probably breaks the __EXCEPTION_TABLE__ stuff in pic mode, but heck, it
wasn't even possible to compile with a shared library before at all.
I'm not 100% sure what the bug is. There's two possibilities:
1: gcc/cp/exception.c has to be fixed to stop doing GOT references to
local symbols, or
2: as/ld/symorder/ld.so etc need to be taught about how to keep local
symbols around so that they can be dealt with in GOT references.
John Polstra's elfkit stuff seems to deal with this fine though, which is
why I think it's a "missing feature" in our hacked gas and ld..
since rt_readenv() already takes care of not setting unsafe variables.
This was part of the changes I submitted to Peter and John during the
review which must have gotten missed.
how I managed to get this out of sync, but I did. I guess that's what I
get for directly committing from different machines that I was testing on.
Pointed out by: Paul Traina <pst@freebsd.org>
a (now) defunct routine that no longer exists (causing an empty .o file),
and were missing some others. Some of the ones we were missing are no-ops
on the i386, so there are now 4 empty .o files.
(It seems that libc/quad has got some defunct functions now)
configurable fallback search paths, as well as new crt interface version.
Also:
- even faster getenv(), get all environment variable settings in a single
pass.
- ldd printf-like format specifications
- minor code cleanups, one vsprintf -> vsnprintf (harmless)
The library search sequence is a little more complete now. Before,
it'd search $LD_LIBRARY_PATH (by opendir/readdir/closedir), then read
the hints file, then read /usr/lib (again by scanning thr directory). It
would then fail if there was no "found" library.
Now, it does LD_LIBRARY_PATH and the hints file the same, but then uses
a longer fallback path. The -R path is fetched from the executable if
specified at build time, the ldconfig path is appended, and /usr/lib is
appended to that. Duplicates are suppressed. This means that simply
placing a new library in /usr/local/lib will work (the same as it did in
/usr/lib) without needing ldconfig -m. It will find it quicker if the
ldconfig is run though.
Similar changes have been made to the NetBSD ld.so, but ours is rather
different now due to John Polstra's speedups and fixes from a while back.
The ldd printf-like format support came direct from NetBSD.
Reviewed by: nate, jdp
ldconfig path (from NetBSD). I added code to make sure there were no
duplicates in the path when multiple ldconfig -m's were used.
Reviewed by: nate, jdp
Obtained from: NetBSD (partly)
with the -R option and store the path in the dynamic header when specified.
The $LD_RUN_PATH environment variable is not checked yet.
While here, split up the code a bit more to enable more selective replacing
of GPL'ed components that are linked with ld.so with others.
Obtained from: NetBSD (mostly, the breakup is my fault)
.weak as gcc and g++ would like to use.
This includes changes to other architectures mostly for completeness,
I don't expect cross-assemblink would work but I could be wrong.
Obtained from: NetBSD
search 'pattern' in whole file 'file', from top to bottom. This is
not necessary; if grep found 'pattern' it can stop further searching
in file 'file'.
Example:
$ time ./grep-old -q Adam /usr/share/dict/*
1.93 real 1.05 user 0.85 sys
$ time ./grep-new -q Adam /usr/share/dict/*
0.14 real 0.06 user 0.06 sys
(the old cc has been tagged with "gcc_2_6_3_final" so we have a reference
point in case of unforseen disasters...)
This has the objc backend active, and I think I've managed to get the
f77 f2c support through in one piece, but I don't know fortran to test it.
A 'make world' change and libobjc commit will follow.
If you normally do 'make -DNOCLEAN world', do not do so this time, I know
it can fail with groff.
This version of gcc makes a **LOT** more warnings on our kernel.
$exit_nomatch: no keyword matched. Default value for variable
exit_nomatch is 0 because `man -k' don't like exit status != 0
Detected by: "Stephen J. Roznowski" <sjr@zombie.ncsc.mil>
as atomically as possible.
(Immutable targets can't be renamed without opening a window when
neither the source nor the target is immutable. Perhaps there
should be a rename_immutable syscall to do this if unsetting the
immutable flags would work.)
Fix things so it *really* won't compile if the environment isn't there.
This commit has been sitting in my to-do list for 2 months. Xditview
should never have been half-removed, so now it's back with a vengance
because we want to keep groff intact as a package.
RCS cannot deal with duplicate tags; the extra one always becomes
inaccessible and useless.
This will prevent the common mistake of specifying the same name
for the vendor tag and the release tag. The FreeBSD CVS repository
already contains zillions of files with this error. We don't need
any more of them.
alias `pcb_cr3' instead. That is still one alias too many, but is convenient
for me since I've replaced the tss in the pcb by a few scalar variables in
the pcb.
need this.
Consider the following code:
case 'O':
output_filename = malloc(strlen(arg)+4);
strcpy(output_filename, arg);
strcat(output_filename, ".tmp");
real_output_filename = arg;
return;
The idea here is to malloc() a buffer big enough to hold the name of
a supplied file name, plus ".tmp". So we malloc() 'size of filename'
bytes plus 4, right? Wrong! ".tmp" is _FIVE_ bytes long! There's a
traling '\0' which strcat() gleefully tacks on _outside_ the bounds
of the buffer. Result: program corrupts own memory. Program SEGVs at
seemingly random times. Bill not like random SEGVs. Bill smash.
Know how I found this? I've been trying to bootstrap -current on my
2.1.0-RELEASE machine at work and I couldn't seem to get libc.a built
because the linker would intermittently blow chunks while executing
things like 'ld -O foo.o -X -r foo.o'. Since this is an initial
bootstrap version of ld, it was linked against the 2.1.0 libc, who's
malloc() behaves differently than that in -current.
Presumeably ld -O doesn't blow up in -current, otherwise someone would
have spotted this already. I don't know if this is a bug or a feature.
Anyway. I'm changing the strlen(arg)+4 to strlen(arg)+5. Bah.
-O filename
Specifies the name of the output file. The file is created as
filename.tmp and when output is complete renamed to filename.
This allows us to:
ld -O ${.TARGET} -x -r ${.TARGET}
file. The field formerly contained random garbage, leading to spurious
differences between otherwise identical executables and libraries.
Submitted by: Bruce Evans <bde@freebsd.org>
been loaded, look for a match by device and inode number if the
traditional pathname comparisons don't find a match. This detects
the case in which a library is requested using two different names
which are really links to the same file, and avoids loading it
twice.
Requested by: peter@freebsd.org
Reviewed by: peter@freebsd.org
matched the filename. Now put the list after the filename. E.g.
filename: vt220keys.1
Keyword: vt220
was: vt220(1), vt220keys(1) - define SHIFTED [...]
now: vt220keys(1), vt220(1) - define SHIFTED [...]
Submitted by: invalid opcode <coredump@nervosa.com>
makewhatis.local - start makewhatis(1) only for file systems
physically mounted on the system
Running makewhatis from /etc/weekly for rw nfs-mounted /usr may kill
your NFS server -- all clients start makewhatis at the same time!
So use this wrapper instead calling makewhatis directly.
Pointed out by: Bruce
"-X" must survive, because of references from relocations, don't
qualify the symbol name with the name of the input file. This
saves some string space. It makes libc_pic.a about 2.4% smaller.
Adapted from a suggestion by Bruce Evans.
descriptions of LD_NO_INTERN_SEARCH and LD_NOSTD_PATH from the manual
page, since they are not supported.
Submitted by: Doug Ambrisko <ambrisko@ambrisko.roble.com>
with valid names, the ***/---names were taken first.
this broke eg:
Index: foo/Makefile
==========
RCS <blah>
Retrieving <blah>
diff <blah>
*** Makefile <blah>
--- Makefile <blah>
By trying to patch the Makefile in the _curent_ directory, rather than
the one in the foo/ directory.
man pages up to mdoc guidelines and fix some minor formatting glitches.
Also fixed a number of man pages to not abuse the .Xr macro to
display functions and path names and a lot of other junk.
. rename the function to main'gethostname, so it can be called unqualified,
. strip the trailing \0 character, closes PR # bin/1084,
. a better way to express an insane long string.
Submitted by: Giles Lean <giles@topaz.nemeton.com.au> (except the 1st)
This solves the problem of being unable to use shared libraries with dots
in their names before the ".so.<version>" code.
This should be brought into -stable.
There are more changes from Paul that look like they should be included,
but they change the format of the hints file, so I'm not going to bring them
in now (but we should in the future).
Obtained from: pk@netbsd.org
.Fx version.rel { , . ; : ( ) [ ]
Example:
The
.Nm xyzzy
command first appeared in
.Fx 2.2 .
Produces:
The xyzzy command first appeared in FreeBSD 2.2.
Suggested by wollman.
.Os FreeBSD 2.1
will now display "FreeBSD 2.1" at the bottom of the man page,
instead of just "FreeBSD".
Added a bunch of missing standards to the .St macro.
4.4BSD is no longer "BSD Experimental".
Obtained from: Partially obtained from NetBSD & 4.4BSD-lite2
It addresses a number of problems that were present in earlier
versions.
The calls to the "init" and "fini" functions of shared libraries
have been reordered, so that they are called in a strictly nested
fashion, as is required for C++ constructors and destructors. In
addition, the "init" functions are called in better order relative
to each other. That makes the system more tolerant of C++ programs
which depend on a library's being initialized before its clients.
The dynamic linker is now more tolerant of shared libraries in
which dependencies on other shared libraries are incompletely
recorded.
Cleanup in the event of errors has been improved throughout the
dynamic linker. A number of memory leaks were eliminated.
The warning message for a shared library whose minor version number
is too old has been clarified.
The code dealing with the "ld.so.hints" file has been cleaned up.
A bug that caused the hints file to be unmapped incompletely has
been fixed. A different bug that could potentially cause the hints
file to be mapped on top of a loaded object has been fixed.
The code that searches for shared libraries has been cleaned up.
The searching is now more compatible with that done by SunOS and
SVR4. Also, some unnecessary and useless searches of both the
hints file and library directories have been eliminated.
Reviewed by: nate@freebsd.org
last time. I should have pulled these in last time as it allows easier
comparison of "where we are at" relative to the current version from
cyclic.com. Since this is in a 4.4BSD style tree layout, the changelogs
dont exactly match the file layout, but it's close enough.
-mprofiler-epilogue to support it and documented the option.
cc.1:
Listed all the machine-dependent options, even the temporary
debugging ones.
invoke.texi:
Fixed the sense of -mno-ieee-fp.
Sorted the machine-dependent options.
Two uninitialised variables were causing a phkmalloc warning (another notch
in phkmalloc's belt) and caused the full rcstemplate to not be constructed
for commits on freefall.
(Note that you need to have either done a 'make world' or explicitly
run a 'make distrib-dirs' (in src/etc) to get some needed directories in
/usr/share/examples/cvs to be built.)
plus a couple of minor changes..
Some highlights of the new stuff that was not in the old version:
- remote access support.. full checkout/commit/log/etc..
- much improved dead file support..
- speed improvements
- better $CVSROOT handling
- $Name$ support
- support for a "cvsadmin" group to cut down rampant use of "cvs admin -o"
- safer setuid/setgid support
- many bugs fixed.. :-)
- probably some new ones.. :-(
- more that I cannot remember offhand..
plus a couple of minor changes..
Some highlights of the new stuff that was not in the old version:
- remote access support.. full checkout/commit/log/etc..
- much improved dead file support..
- speed improvements
- better $CVSROOT handling
- $Name$ support
- support for a "cvsadmin" group to cut down rampant use of "cvs admin -o"
- safer setuid/setgid support
- many bugs fixed.. :-)
- probably some new ones.. :-(
- more that I cannot remember offhand..
plus a couple of minor changes..
Some highlights of the new stuff that was not in the old version:
- remote access support.. full checkout/commit/log/etc..
- much improved dead file support..
- speed improvements
- better $CVSROOT handling
- $Name$ support
- support for a "cvsadmin" group to cut down rampant use of "cvs admin -o"
- safer setuid/setgid support
- many bugs fixed.. :-)
- probably some new ones.. :-(
- more that I cannot remember offhand..
vector. Now it is called the "symbol caching" vector. This was made
possible and unconfusing by other changes that allowed me to localize
everything having to do with the caching vector in the function
reloc_map().
Switched to alloca() for allocating the caching vector, and eliminated
the special mmap-based allocation routines. Although this was motivated
by performance reasons, it led to significant simplification of the
code, and made it possible to confine the symbol caching code to the
single function reloc_map().
Got rid of the unnecessary and inefficient division loop at the
beginning of rtld().
Reduced the number of calls to getenv("LD_LIBRARY_PATH") to just 1, on
suggestion from <davidg@root.com>.
Added breaks out of the relocation loops when the relocation address is
found to be 0. A relocation address of 0 is caused by an unused
relocation entry. Unused relocation entries are caused by linking a
shared object with the "-Bsymbolic" switch. The runtime linker itself
is linked that way, and the last 40% of its relocation entries are
unused. Thus, breaking out of the loop on the first such entry is a
performance win when ld.so relocates itself. As a side benefit, it
permits removing a test from md_relocate_simple() in
../i386/md-static-funcs.c.
Unused relocation entries in other shared objects (linked with
"-Bsymbolic") caused even bigger problems in previous versions of the
runtime linker. The runtime linker interpreted the unused entries as if
they were valid. That caused it to perform repeated relocations of the
first byte of the shared object. In order to do that, it had to remap
the text segment writable. Breaking out of the loop on the first unused
relocation entry solves that.
Submitted by: John Polstra <jdp@polstra.com>
them. Good greif! This was causing an unimaginable amount of brain-damage!
The mere fact that I griped about $ Log $ in a previous commit (misspelled
deliberately here) meant that the blasted thing was being expanded from the
middle of the log entry as well as the beginning, and using " * All these"
as the comment leader.. AARGH!!!! We *really* need to prevent these from
being expanded! (or remove the magic identifier from the source).
All those $Log$ entries, combined with the whitespace changes are a real
pain.
I'm committing this now, before it's completely finished to get it compiling
and working again ASAP. Some of the FreeBSD specific features are not working
in this commit yet (mainly rlog stuff and $FreeBSD$ support)
This is going to be pretty messy.... Although the vendor import was correct,
both the vendor and release tags are the same "gnu"... :-/
Getting cvs to choose the correct one might be rather interesting...
Note, this is going to be messy.. 2.3 was vendor-branch imported, while
2.6 was done as a delta. Sigh. I'm importing this on a vendor branch so
that it will be easier to deal with next time..
(cvs-1.6 wants rcs-5.7, and rcs-5.7 suggests diffutils-2.7)
Implemented symbol memorizing to reduce the number of calls to lookup(),
making relocation go faster. While relocating a given shared object,
the dynamic linker maintains a memorizing vector that is directly
indexed by the symbol number in the relocation entry. The first time a
given symbol is looked up, the memorizing vector is filled in with a
pointer to the symbol table entry, and a pointer to the so_map of the
shared object in which the symbol was defined. On subsequent uses of
the same symbol, that information is retrieved directly from the
memorizing vector, without calling lookup() again.
A symbol that is referenced in a relocation entry is typically
referenced in many relocation entries, so this memorizing reduces the
number of calls to lookup() dramatically. The overall improvement in
the speed of dynamic linking is also dramatic -- as much as a factor of
three for programs that use many shared libaries.
Submitted by: jdp@polstra.com "John Polstra"
bsd.man.mk when I change the latter to use `::' instead of `:'
dependencies. (bsd.man.mk is included because NOMAN isn't defined.
The maninstall target is supposed to be private to bsd.man.mk so
bsd.man.mk doesn't bother testing if it is already defined. The
test for redefinition in Makefile.dev was too early to do anything.)
Change install target to a beforeinstall target (perhaps there should
be an `extrainstall' target so that Makefiles don't have to abuse
one of beforeinstall, install, realinstall or afterinstall). Don't
bother testing for the install target already being defined. Rewrite
the shell loop as a make loop (this reduces the time for installing
groff from 78s to 65s here).
include this in the old makefiles.
I intended to fix only the private maninstall rule but found a lot of
other bogons and bugs:
- strong resistance to installing the program anywhere other than
${DESTDIR}/usr/bin (first, ../../Makefile.inc was not included.
../Makefile/inc was redundantly included instead. Second, /usr/bin
was hard coded).
- the owner, group and permissions were hard coded.
- the man page was installed twice.
- MANDEPEND wasn't necessary.
- calculations to determine the obj directory weren't necessary.
- there were unnecessary private rules for depend, rcsfreeze and tags.
We don't support the rcsfreeze target.
- there was an extra, bogus, rule for `all'.
The final version uses suffix rules to eliminate the remaining verboseness
involving directories (${.CURDIR}) and to potentially allow multiple
shell programs in one directory.
I got tired of see ``UNIX System Managers Manual''
NOTE: There still a couple of UNIXs left in here. There deal with the
documents. We may want to change there also, even though VERY little of there
even pertain to FreeBSD.
instead of the uninitialized one $(DEVICE).
I hoped these changes would fix some of the large runtime macro processing
bugs, but they seem to only fix some small build-time macro substitution
bugs. E.g., `man ms' now tells you to invoke groff with the flags `-ms'
instead of the bogus flags `-m'; `man groff now tells you that the default
device is `ps' instead of the bogus device `'.
shared library. Formerly, the message looked like this:
ld.so: run: libjdp1.so.1.0: Undefined error: 0
The new message looks like this:
ld.so: run: Can't find shared library "libjdp1.so.1.0"
(Where "run" is the name of the program being executed.)
Submitted by: jdp@polstra.com (John Polstra)
symbols.
An easy example to see this is to develop an X program which links
against Xt, but doesn't add -lX11 to the link line. It will link fine,
but cause run-time errors by ld.so because of missing symbols used by Xt
defined in X11. This patch makes the errors more readable.
Submitted by: jdp@polstra.com (John Polstra)
in the diff. This makes it so that diffs containing files in different
subdirectories that have the same name not patch the same file. For example
a diff with patches to Makefile, des/Makefile, usr.bin/Makefile would attempt
to patch Makefile three times.
"update -jHEAD" when a file has been added on the specified tag.
It doesn't actually make cvs 'handle' it, it just stops it from dying
and leaving stray locks and other wreckage.
This was suggested by the CVS maintainers, and is in cvs-1.5.1-950901.
1: It stops invalid files being created in the cvs tree
2: It stops the import from aborting without mailing a commit message..
The first is simple, it opens the file for reading before touching the
repository, and the second catches the pieces when it hits an unreadable
file rather than just aborting mid-way through, leaving the repository in
a bit mess.
Reviewed by: rgrimes
LINK_SPEC. This solves a problem with the f77 frontend where
aproviding the -r8 option (use REAL*8) caused `cc' to ``forget'' to
pass the entry point to the linker.
Closes PR #gnu/644: f77 -r8
Reviewed by: watanabe@komadori.earth.s.kobe-u.ac.jp (Takeshi WATANABE)
texinfo-3.6 distribution to enable the use of the cursor keys.
Since there is an open problem report (gnu/289) for this it might be
of interest for (some of) you.
I (Joerg) have also added a minor hack that makes info recognizing a
window size change while it has been suspended.
Submitted by: thomas@ghpc8.ihf.rwth-aachen.de (Thomas Gellekum)
bootparam_prot.x was changed for nfsv3 but bootparamd and callbootd
kept using the old version which fortunately failed at build time.
Copying hasn't been necessary since path handling was fixed in
rpcgen/rpc_main.c some time ago.
on dlclose. Also correctly call constructors and destructors for libraries
linked with /usr/lib/c++rt0.o.
Change interpretation of dlopen manpage to call _init() rather than init()
for dlopened objects.
Change c++rt0.o to avoid using atexit to call destructors, allowing dlclose to
call destructors when an object is unloaded.
Change interface between crt0 and ld.so to allow crt0 to call a function on
exit to call destructors for shared libraries explicitly.
These changes are backwards compatible. Old binaries will work with the new
ld.so and new binaries will work with the old ld.so. A version number has
been introduced in the crt0-ld.so interface to allow for future changes.
Reviewed by: GAWollman, Craig Struble <cstruble@singularity.bevc.blacksburg.va.us>
cpio/copyout.c:
Don't output a file if the major, minor or totality of its rdev would be
truncated. Print a message about the skipped files to stderr but don't
report the error in the exit status. cpio's abysmal error handling doesn't
allow continuing after an error, and the rdev checks had to be misplaced
to avoid the problem of returning an error code from routines that return
void.
pax/pax.h:
Use the system macros for major(), minor() and makedev().
pax already checks _all_ output conversions for overflow. This has the
undesirable effect that failure to convert relatively useless fields
such as st_dev for regular files causes files not to be output. pax
doesn't report exactly which fields couldn't be converted.
tar/create.c:
Don't output a file if the major or minor its rdev would be truncated.
Print a message about the skipped files to stderr and report the error
in the exit status.
tar/tar.c:
For not immediately fatal errors, exit with status 1, not the error count
(mod 256).
All:
Minor numbers are limited to 21 bits in pax's ustar format and to 18
bits in archives created by gnu tar (gnu tar wastes 3 bits for padding).
pax's and cpio's ustar format is incompatible with gnu tar's ustar
format for other reasons (see cpio/README).
now safely add a line like
ldconfig -m ${PREFIX}/lib
in ports' Makefiles and packing lists without throwing away some
directories the user may have added.
Submitted by: Mostly by Paul Kranenburg <pk@cs.few.eur.nl>
>Number: 364
>Category: bin
>Synopsis: Interrupting man results in half-baked man page
>Description:
Interrupting man while it is waiting for the page to be formatted
results in a zero length file or a half-baked file.
>How-To-Repeat:
Inetrrupt man while it is formatting a page.
>Fix:
Pay more attention to the return value from the system command.
Submitted by: John Capo <jc@irbs.com>
like "3DBorder" and "[". (NB, the "3DBorder" problem has actually
been intention, it allowed for weird section names like "3xyzzy". We
don't have them, either.)
(Partially) Submitted by: taob@gate.sinica.edu.tw (Brian Tao)
file specifications when they've been extracted (enabling you to get a file
fast if it occurs somewhere close to the front).
Submitted by: Marc van Kempen <wmbfmk@urc.tue.nl>
> * the gdb-4.13 of current (compiled and used under 2.0R) can not attach to my
> own processes (it works only then i'm root - else i get open failed - for my
> own processes)
how embarassing ! This turns out to be a bug in infptrace.c. Below
is a patch. Could some kind soul apply it ?
Submitted by: "Gary J." <garyj@rks32.pcs.dec.com>
of the linker to enforce linking of modules in command line order it is
not possible to link gdb shared with -lcompat.
*HACK ALERT*
Removed -lcompat from LDADD and bring in the necessary functions out of
libcompat as a source module until the linker can be fixed.
underlying bugs which are caused by mixing static/shared libraries with
this change in place.
The shlib code is not capable of supporting this feature in it's present
state and will need significant modifications in order to do so.
in libc, we can get rid of the private/special copies of yp_*.c
files and rpcgen them at compile time instead. This leaves us with
just one unique source files: yppush.c
date: 1995/02/04 20:27:23; author: phk; state: Exp; lines: +1 -1
added *.info and *.db to the default "ignore" list in cvs to avoid obviously
common mistakes.
use it. :-)
It now explicitly requires the specification of a directory to import
from, either as an argument to the script, or by asking the user about
it. (Previously, it implicitly used `.', like cvs import does.)
Also implemented an option `-n', which does essentially the same like
the overall CVS option `-n': show only what would have been done,
don't do any commitment. Note that since the modules' database is
checked out in place (and not commited back), it will erroneously be
reported as to be imported, too:
cvs import: Importing /home/ncvs/ports/foobar/foo/modules
I ports/foobar/foo/modules/CVS
N ports/foobar/foo/modules/modules
This is an unwanted side-effect, but gives the user the option to see
if the `ed' magic did the right thing when editing modules/modules.
Rod, can you please check the function ``checktag'' in the script if it
will be restritctive enough?
interpret it. I've preserved the bugs that perl must be installed
to build part of perl and that it must be installed in the wrong place
(no ${DESTDIR}).
members over shared library members. This modification causes the linker
to use the first definition it sees for a symbol instead of having
priorities based on the library type. This modification should allow
gdb to compile again.
Obtained from:
Email conversation with Paul Kranenbury, but implemented completely by
me. If it doesn't work, it's my fault not his.
default switches, template functions get EXTERNAL linkage in each file
in which they occur, causing multiple definition errors during
linking. The enclosed patch (from gnu.g++.bug) appears to solve the
problem (I enclose the accompanying message as well).
This patch fixes the multiply defined template functions bug
which was introduced in 2.6.1.
Submitted by: "Justin T. Gibbs" <gibbs@estienne.cs.berkeley.edu>
Obtained from: Jason Merrill at cygnus support on G++ mailing list
one is much more intelligent, not only that it would accept multiple
man page locations, it also behaves like ``make'' in that it will only
deal with cat pages that are out of date (by default).
Wolfram also wrote a man page for it.
Submitted by: wosch@cs.tu-berlin.de (Wolfram Schneider)
- Don't define NO_IMPLICIT_EXTERN_C here. It is already the default
(defined in i386/bsd.h).
- Don't lose the fixed comment about FUNCTION_PROFILER.
- Don't lose the define of NO_PROFILE_DATA.
Replace the unused define of COMMENT_BEGIN by the less-unused define
of ASM_COMMENT_START. COMMENT_BEGIN was only defined in i386-specific
files and was not used in any part of gcc-2.6.3. ASM_COMMENT_START
is defined for several targets and is used for stuff that we don't
support (dwarf).
stuff. I'd like to have it in CVS, and i figured that this might be
the best place to go.
Someone (phk?) could install it into /usr/local/bin on freefall, for
convenience.
Suggested by: phk
basic-block profiling:
1. use a .stabs(25) symbol to link all the data structures together with.
The regular method isn't safe for the kernel.
2. add a BB before the prologue and add a BB after the epilogue, this
alows us to find the length of any counted BB. This is a cheap and somewhat
reasonable measure of actual cost.
if a signal is received.
This fixes a bug where killing the process would cause a
"No manual entry for XXX" to be printed even if the manpage
was found.
first place and we were too long in finding out. Now we know, and the
damage is hard to fix. This is part one: ld will not link gcc dynamic,
if specified as "-lgcc".
Suggested by: dyson & davidg
disables dysfunctional disinformed namei's,
needlessly negating namei cache."
These hacks cuts the number futile attempts made by cc and ccp to find
cross-compilers and other weird stuff. A make of the BOOTFLP kernel
has 20% less namei calls now, that is from 30647 down to 24563 calls.
NetBSD ld code except for local changes for dlopen() and friends and
the hashing on the minor value of the shlibs. We should be binary
compatible now with all their libraries.
Obtained from: NetBSD
the same as the changes made in the repository. This is often seen by
people with remote CVS trees that have applied their local patches to the
master site. a 'cvs update' will show bogus conflicts.
Obtained from: CVS mailing list, Stig<stig@inse.com>
In diffutils 2.6 and 2.7, diff3 -A complains about identical overlapping
changes. They're different from the ancestor but not from each other...
Why bother? The patch below fixes this nonsense and preserves [B]ackwards
compatiblity with the -B flag (also --show-bogus-conflicts).
Party on...
Stig
i reported today earlier..tested and works OK..
( To those who want to experience bug try running aub
with old version of socket.ph and with new one or just any
perl script "requiring " <sys/socket.ph> or <sys/cdefs.ph> )
This is a ported/modified version of the yppush program from the
yps-0.21 package from the NYS project. This program is used to propagate
updated NIS maps from an NIS master to an NIS slave. It's normally invoked
by /var/yp/Makefile.
This version of yppush has been modified in the following ways:
- Cleared up several Linux/BSD incompatibilities, largely involving
header files.
- converted from GDBM to DB with extreme predjudice. (well, not really...)
- removed lots of ugly debugging code that really didn't do anyone any good.
- Fixed a couple of inaccurate/badly formatted error messages.
- Renamed some functions to avoid collisions with certain YP routines
hidden inside libc.
- Small signal handling kludge: Linux has different struct sigaction
that us.
- Incorporated some functions from the yps-0.21 library that yppush was
dependent on.
Like ypxfr, this works, but could use come cleaning up.
the version installed from /usr/share. It's hard to eliminate old versions
- few Makefiles have `uninstall' targets and sup/ctm tends to blow away
old Makefiles.
This Makefile needs more work. Stuff is built at install time...
Don't initialize CLEANFILES here. Many FONTFILES are sources and required
special clean rules to avoid cleaning.
Makefile.tty:
Initialize CLEANFILES. All tty FONTFILES are objects.
misfeature caused troubles when a program attempted to access a shlib
where one with a higher minor number has been hashed. Ldconfig does
only include the highest-numbered shlib anyway, so this is in no way a
limitation of generality.
Caution: after installing the new programs, your /var/run/ld.so.hints
needs to be rebuiult; run ldconfig again as it's done from /etc/rc.
perl setuid scripts don't work in 2.1-current for the same reason they were
not working in 1.1.5.1.
Perl 5 has the same "problem" of course.
We have almost POSIX saved uids but we must undefine the following symbols
in order to get setuid perl scripts :
Submitted by: roberto@blaise.ibp.fr (Ollivier Robert)
This might be useful for debugging applications that use a special LDT.
However, printing of all segment registers is currently broken.
Don't print "last exception: " before the FPU opcode and pc, etc. The
opcode and pc, etc., are for the last FPU _instruction_.
Pass the saved exception status word to print_387_status() so that the
exception(s) that caused or will cause a trap can be seen. The kernel
has supported this since 1.1 or before. The kernel still clobbers the
tag word if a trap occurs.
Remove unused null function clear_regs().
cvs is not being used effectively for gdb. Our old changes get clobbered
and our new changes are mixed with "vendor" changes in the same updates
so they will be difficult to untangle for the next release of gdb. The
revision logs get spammed for each release of gdb.
the wild, slippery orgy commence!
Gary Jennejohn, too studly for his own good, has finally come through with
the new, improved gdb 4.13. This gdb features:
o kgdb support - if this works (and I urge folks to test it), we can
finally purge the old and hateful version of kgdb from our source
tree.
o attach/detach support. See comments in README.FreeBSD for more
details.
o Well, it's newer. Our previous version was 4.11.
Comments and flames to gj, of course! :-)
Thanks, Gary. Much appreciated. The previous state of gdb/kgdb has been a
thorn in all of our sides for some time..
Submitted by: gj
warning handling and allows for link-time warnings with a modified
version of gas.
Note: Not all of the newer bits were updated such as some of the non-x86
machine-dependant code is relevant to FreeBSD right now.
Obtained from: NetBSD
Change a round to a truncate. Problem reported from Christoph Kukulies:
9.8 2 / p did an IOT trap.
There is one remaining problem.: 9.8 2 % p shows on other machines 1.8
but does here in the moment 1.
in getting mirror-2.3 to work with FreeBSD, i found that timelocal.pl has
a bug. a patch is included below. this needs to be applied to both
src/gnu/usr.bin/perl/lib/timelocal.pl and
src/usr.sbin/xntpd/scripts/monitoring/timelocal.pl
Submitted by: jmb
already C++ safe, or C++ header files.
This fixes the problem with parse errors in header files when compiling C++
files.
Recompiling libg++ also solves the undefined synbols problem.
Notice that the libgcc DOESN'T change number, because there are no
changes.
Also now the gnu2bmake stuff is synchronized again.
I commit this so that others can test too.
You might want to postpone any "make worlds" until tomorrow, to
avoid any problems I didn't see in the first pass.
Thanks to Bruce for rounding up our changes to gcc.
more like binaries. This is hard to do using a general rules because
the natural `.sh:' rule has a null suffix and null suffixes are broken.
(With 1.1.5's make they sometimes work and sometimes cause core dumps.
2.0's make has a botched fixed and they never work.)
profiling and wchar_t. Profiled libraries will shrink.
tm.h:
Our wchar_t is int, not unsigned short.
Always link statically if profiling.
Define all the SPECs together.
final.c, tm.h:
Don't emit unused profiling code and data.
aux-output.c:
Always preserve the PIC register if profiling.
aux-output.c, tm.h:
Implement FUNCTION_PROFILER_EPILOGUE (currently not used).
New:
tm.h:
Set the target defaults in the correct way.
I know that many of these entries are bogus and need to be revisited,
but let's get the tree working again for now and then do a pass through
looking at all the __FreeBSD__ entries, shall we?
GCC-2.6.1 COMES TO FREEBSD-current
----------------------------------
Everybody needs to 'make world'.
Oakland, Nov 2nd 1994. In a surprise move this sunny afternoon, the release-
engineer for the slightly delayed FreeBSD-2.0, Poul-Henning Kamp (28),
decided to pull in the new version 2.6.1 of the GNU C-compiler.
The new version of the compiler was release today at noon, and hardly 9
hours later it was committed into the FreeBSD-current source-repository.
"It's is simply because we have had too much trouble with the version 2.6.0
of the compiler" Poul-Henning told the FreeBSD-Gazette, "we took a gamble
when we decided to use that as our compiler for the 2.0 release, but it
seems to pay of in the end now" he concludes.
The move has not been discussed on the "core" list at all, and will come as
a surprise for most Poul-Hennings peers. "I have only discussed it with
Jordan [J. K. Hubbard, the FreeBSD's resident humourist], and we agreed that
we needed to do it, so ... I did it!". After a breath he added with a grin:
"My email will probably get an all time 'disk-full' now!".
This will bring quite a flag-day to the FreeBSD developers, the patch-file
is almost 1.4 Megabyte, and they will have to run "make world" to get
entirely -current again. "Too bad, but we just had to do this." Was
the only comment from Poul-Henning to these problems.
When asked how this move would impact the 2.0 release-date, Poul-Hennings
face grew dark, he mumbled some very Danish words while he moved his fingers
in strange geometrical patterns. Immediately something ecclipsed the Sun, a
minor tremor shook the buildings, and the temperature fell significantly.
We decided not to pursure the question.
-----------
JOB-SECTION
-----------
Are you a dedicated GCC-hacker ?
We BADLY need somebody to look at the 'freebsd' OS in gcc, sanitize it and
carry the patches back to the GNU people. In particular, we need to get
out of the "i386-only" spot we are in now. I have the stuff to take a
gnu-dist into bmake-form, and will do that part.
Please apply to phk@freebsd.org
No Novice Need Apply.
Perl's scripts are still trying to execute perl out of /usr/gnu/bin/perl.
The hack Larry was using for h2ph.1 doesn't work with the new macros, so
make it a real man page.
Also, we weren't building the .ph files, add them as an afterinstall rule
in the x2p subdirectory.
and /usr/share/perl (library). The latter was chosen as analogous to other
directories already present in /usr/share, like /usr/share/groff_font and
(particularly) /usr/share/mk.
no longer link against the whole library, since they don't require much
from it, but just compile the few small modules they actually need static.
This should save a measurable amount of space; compare:
-r-xr-xr-x 1 bin bin 155648 Sep 18 18:00 cc1*
-r-xr-xr-x 1 root bin 1048576 Sep 18 17:33 cc1.noshae*
Of course, the library takes up a bit of space, but when you add in the
savings from the C++ compiler, you more than make up the difference:
-r--r--r-- 1 bin bin 1157344 Sep 18 18:27 /usr/lib/libcc_int.so.26.0
-r-xr-xr-x 1 bin bin 491520 Sep 18 18:27 /usr/libexec/cc1plus*
completely when ldconfig unlinks it. If init is shared, then the
referenced unlinked copy of the hints file created by running
ldconfig in /etc/rc caused the file system to be unclean after
every reboot.
we're not ready for yet. gcc and all profiled libraries will need
to be recompiled. I suspect that the dependencies aren't complete
enough to do this automatically.
automagically. -lfoo has to be right to work, but ${LIBFO0} is too
easy to forget or misspell; nothing checks it and it should be
different for shared libraries.
being created and config.h depended on Makefile.inc being in the wrong
directory so real dependencies were not being checked. The "depend"
target was not created either so "make depend" always found work to do.
Subject: man returns 1
In 1.1.5.1, man returns a status of 1 if the lookup succeeds and 0 if
it fails. Here is a patch for what I believe is a simple oversight:
Submitted by: jkh
FreeBSD system sources installs itself as the standard cc and c++. I've
fixed c++ to call cc instead of gcc and removed all the symlinks
that get created to g** version of the binaries. This means that
you can install a second version of gcc that does use the g prefix
alongside the "system" version of gcc. The only conflict is libgcc
but since we install it as libcc.so.26 and nothing else is likely
to that should be ok.
Reviewed by:
Submitted by:
I know that I said earlier that this should be unconditional behaviour,
but I thought about it a little more and concluded that the principle of least
surprise dictates that I make it an option.
handling of errors through the standard err() and warn()
more fixes for Geoff Rehmet's NULL pointer bug.
fixes NULL pointer bugs when linking mono and nested X servers.
supports a `-nostdlib' option.
accept object files without a symbol table
don't attempt dynamic linking when `-A' is given
a few variable names have chaged (desc -> fd), and the formatting has
changed which should make it much easier to track his sources.
I tested 'make world' for /usr/src and X twice with these changes.
Paul Kranenburg's description:
ld is in error here, assuming that symbols with N_EXT set always have an
entry in the (global) symbol table: this is not the case for C++ generated
constructor/destructor symbols. I can reproduce your failure by fudging
a "multiply defined" constructor symbol by hand. Checking for `g == NULL'
seems to be a ok as a fence for now.
So:
for now, in do_file_warnings() we check if g == NULL, before trying to generate
any warning messages. This prevents a NULL pointer dereference.
called with -K-Keoptions -Kioptions. This should fix the problem with
$Id$ still getting changed.
I am also install both ncvs and ocvs on freefall with this change as
ocvs still had the bug with -I \! which I fixed but did not reinstall.
This is a greatly pared down version of the full gdb-4.12, all the
config stuff has been removed and the supporting libraries have
been stripped to a minimum. This is a 1.1.5 only port, I'll do a
more complete port for 2.0 which will have all the config stuff
and will install the gnu support libraries as system libraries like
we do for readline.
There wasn't much point for 1.1.5 since only gdb would use them so I
went for saving space instead. For 2.0 I'll config all the
other gnu tools to use them as well.
The following two patches should allow the documented "-I !" option to
skip the ignore lists and import/update all files in the directory.
I need it to force certain files to import (ie, csh.a which is part of
the csh documentation).
NOT touched by cvs. Only takes effect if -DFREEBSD_DEVELOPER, and installs
as ncvs when this is defined. You must also have the changes to rcs
for this to work.
to public. These functions are also used in /usr/include/link.h,
so it looks, like they shouldn't be private.
I will ask Paul about that, if this is correct.
now, DO_COMPRESS. This controls whether or not catpages are compressed or
not (on by default, since little else uses the catpages and those few things
that do can always configure in a `zmore' in place of more or something, and
saving space is more important, IMHO).
Uncompression support is now on by default since that's the only way to support
mixed-mode environments. If you don't like it, just don't compress your man
pages and it won't be used! :-). Supports gzip. You can also compress
the man pages themselves (or gzip them) now and it will work.
late stage due to the fact that link.h was copyright Sun Microsystems.
This version of ld sync's us up with NetBSD's ld and supports compatablily
with NetBSD's -[zZ] flags (which we had reversed). Compiling with this
new ld will give you RRS warnings for libraries which do not contain .type
infomation - these wsarnings are harmless and will go away as soon as you
recompile your libraries (cd /usr/src; make libraries).
Message-Id: <199402111717.SAA05326@strider.st.dsi.unimi.it>
Subject: Re: cpio bug ?
Quoting from J Wunsch:
> | From the man page:
> |
> | -l, --link
> | Link files instead of copying them, when possible.
>
> (Usable only with the -p option.)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
This is not in cpio man page. Someone please add it.
patch file had absolute pathnames in it and went and patched /usr/src directly
(first time this has happened, I'll watch for it now), so I thought I might
as well just commit it and clean up the .orig files and whatnot left behind.
Sorry - this is the first time this has happened to me. Very confusing.
These files aren't really necessary to us, but should be kept in sync anyway.
patch file had absolute pathnames in it and went and patched /usr/src directly
(first time this has happened, I'll watch for it now), so I thought I might
as well just commit it and clean up the .orig files and whatnot left behind.
Sorry - this is the first time this has happened to me. Very confusing.
You write that
LDFLAGS+= -Xlinker -Bstatic
no more needed, but you have
CFLAGS += -static -I$(.CURDIR) -I$(.CURDIR)/$(MACHINE)
This -static doesn't make any sense in your version,
because it not passed to linker's state (LDFLAGS),
so we have SHARED /usr/bin/ld in this case.
(Older Makefile produce non-shared ld).
I suppose, that -static in CFLAGS was introduced to
make non-shared ld, so I restore previous LDFLAGS
to have non-shared ld. If we want to have shared ld
we need to remove -static from CFLAGS too, not only LDFLAGS,
but this need special issue and corresponding
commit log. Your current version hang into intermediate
state (beetween two sides), so I move it to one side.
Second, I restore NOPIC dependance again from older Makefile:
.if !defined(NOPIC)
SUBDIR+= rtld
.endif
We don't need ld.so, if NOPIC
P.S. I don't see any purpose to commit new makefile, old version
is better.
commented out in #ifdef DEBUG
As Paul told me, it is only informational, nothing more.
I don't want several screens of this information
on each linking (netstat f.e.)
On any other system -z means "standard" ZMAGIC format and is the
default. Therefore I've made -z be standard ZMAGIC and -Z be ZMAGIC
stored in the new a_midmag format.
The "standard" ZMAGIC format is now the default as well.
lib.c:
Pull in archives containing definitions needed by shared objects.
warnings.c:
Less spurious "undefined symbol" msgs for shared library defined
symbols.
ld.c:
Do a better job of recognising data in text segments, eg. `const char []'.
shlib.c,ld/rtld/{Makefile rtld.c}
Use strsep() in stead of strtok() and restore colons in eg. env. vars.
Subject: man pages for diff et al.
I finally got tired of not having man pages for diff and friends, so I
edited the appropriate sections of the texinfo manual into man format.
to output the same QMAGIC format as BSDI does. This is triggered by
a new '-q' flag ('-Xlinker -q' in gcc). The default can be changed from
ZMAGIC to QMAGIC by defining DEFAULT_MAGIC=QMAGIC when building ld.
