When a child is receiving SIGSTOP, eval continues with the next
command. While that is correct for the interactive case (Control-Z
and you get the prompt back), it is wrong for a shellscript, which
just continues with the next command, never again waiting for the
stopped child. Noted when childs from cronjobs were stopped, just to
make more processes (by wosch).
The fix is not to return from a job wait when the wait returned for a
stopped child while in non-interactive mode. This bahaviour seems to
be what bash2 and ksh implement. I tested for correct behaviour for
finnaly killing the child with and without forgrounding it first.
When not foregrouding before killing, the shell continues with the
script, which is what the other shells do as well.
Reviewed by: Silence on -current
This makes "mkdir /nonexistant/foo" complain that /nonexistant
doesn't exist rather than /nonexistant/foo which doesn't make much
sense.
Submitted (in a different form) by: W.H.Scholten <whs@xs4all.nl>
no longer contains kernel specific data structures, but rather
only scalar values and structures that are already part of the
kernel/user interface, specifically rusage and rtprio. It no
longer contains proc, session, pcred, ucred, procsig, vmspace,
pstats, mtx, sigiolst, klist, callout, pasleep, or mdproc. If
any of these changed in size, ps, w, fstat, gcore, systat, and
top would all stop working. The new structure has over 200 bytes
of unassigned space for future values to be added, yet is nearly
100 bytes smaller per entry than the structure that it replaced.
This lets you resolve pathnames to their underlying physical path:
critter# realpath /sys/kern/subr_disk.c
/freebsd/src/sys/kern/subr_disk.c
Update the pwd man-page slightly.
- The ability to specify elements by volume tag instead of their actual
physical location. e.g., instead of:
chio move slot 3 slot 4
you would now use:
chio move voltag FOO slot 4
- The ability to return an element to its previous location, as specified
by the source element. e.g., instead of:
chio move drive 0 slot 4
you would now use:
chio return drive 0
or
chio return voltag FOO
These features will obviously only work with changers that support volume
tags and/or source element IDs. chio(1) should fail gracefully if the user
attempts to use these new features and the source element ID or volume tag
are not found.
PR: bin/21178
Submitted by: "C. Stephen Gunn" <csg@waterspout.com>
Reviewed by: ken
include:
* Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The
alpha port is still in transition and currently uses both.)
* Per-CPU idle processes.
* Interrupts are run in their own separate kernel threads and can be
preempted (i386 only).
Partially contributed by: BSDi (BSD/OS)
Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
Serious fix still needed, see discussion on -current
(Subject: /bin/sh dumps core with here-document of 8bit text)
Problem in this code originally spotted by
Jun Kuriyama <kuriyama@FreeBSD.org>
growstackblock() sometimes relocates a stack_block considered empty
without properly relocating stack marks referencing that block.
The first call to popstackmark() with the unrelocated stack mark
as argument then causes sh to abort.
Relocating the relevant stack marks seems to solve this problem.
The patch changes the semantics of popstackmark() somewhat. It can
only be called once after a call to setstackmark(), thus cmdloop() in
main.c needs an extra call to setstackmark().
PR: bin/19983
Submitted by: Tor.Egge@fast.no
Reviewed by: Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at>
flag has been depricated, although it still works with a warning
message, and replaced with an environment variable CLICOLOR (command
line interface colour). This could be used by other tools that
want to be able to control colour output.
In addition if the environment variable CLICOLOR_FORCE is defined
colour sequences are output irrespective of whether the output is
directed to a terminal (as long as TERM references a colour capable
terminal of course ;)
PR: bin/20291 and bin/20483
Beyond changes to the build system, this includes fixing up the sample
freebsd.mc configuration for changes in defaults and syntax, removing
outdated documentation, and updating the release notes.
in committers (Message-Id: <72836.964344168@axl.ops.uunet.co.za>).
Also cleaned up a .Pq macro which was causing problems previous
to the original update I made.
Reviewed by: sheldonh
Approved by: jkh
option already supported octal. Add a comment to the -r option
in the man page so it's a bit more specific.
Discrepancy brought to my attention by: sasdrq@unx.sas.com
Approved by: jkh
on different file systems.
PR: bin/12375
Submitted by: Takashi SHIRAI <shirai@nintendo.co.jp>
No response by: steve
No problem with: building 5-current world
* remove hard sentence breaks
* use of Fl with Ar if argument available
* Dq -> Sq where better
* Ql -> Dq and Ql -> Fa where better
* include sections to Xr macro
* It Ar .ss -> It Ar ss
fixes (very important in this case). Version 1.40 should be discarded.
This version includes the language diffs. To receive them, use
cvs diff [-u] -r 1.39 -r 1.41
usage of .Xr and removal of hard sentence breaks).
PR: 18880
Submitted by: Christian Weisgerber <naddy@unix-ag.uni-kl.de>
Obtained from: OpenBSD (in parts)
used to extract modified boot hints to make loader(8)-time changes
"sticky". It tries to use \ style quoting so that it can be used directly
with foo.conf files. It can also extract specific variables.
ps(1) should not be returning a success code (0), it should return an
error code (1). This was fixed on OpenBSD over 3 years ago.
PR: 19069
Submitted by: Jim Sloan <odinn@atlantabiker.net>
Reviewed by: rwatson
terminal emulator.
As pointed out by jhb, a more scalable solution would be preferable
when multiple applications in the base system begin linking against
libh.
Submitted by: Doug Barton <DougB@gorean.org>
mark up a sample invocation, since it is not a command internal to the
described utility.
Do not use Ar (argument) to mark up something which is not an argument
to the utility or one of its internal commands.
the long -l output format with the last commit. Fix it
by replacing the "%b %e" strftime format with "%Ef".
Make a note in the manual page that the LANG environment
variable affects the running of ls.
Reviewed by: ache
representation of time and date") won't change in time. Instead
of hard coding the locations of the time elements and hoping that
they don't move use strftime to generate the desired formats in
the first place.
PR: bin/7826
Don't use curses functions, use tputs instead
Add ^C reaction - reset colors
Optimization - don't turn off colors after EACH file printed.
Fix wrong ctype macro arg type in LSCOLORS parsing
this is extremely inefficient, instead write them all down at the
beginning.
The correct sequence to switch colours off is to first use 'op' if
it exists, otherwise use 'oc'. If neither of these exist then we
shouldn't be doing colour with this terminal.
Reviewed by: ache
to manage the ANSI colour sequences. Colour support is disabled
unless the TERM environment variable references a valid termcap.
* Allow optional compilation of the colour support in the Makefile,
defaulting to yes. This allows us to switch it off for fixit
floppies and other mediums where space is an issue and the extra
bloat of statically linking with ncurses isn't acceptable.
* Display a warning if colour is requested with '-G' but support
for it isn't compiled in.
It is not switched on by default and must be enabled with the -G
flag. When using ls -G the output behaviour is modified with ANSI
colour sequences wrapped around filenames to help distinguish file
types. (Colours can be redefined in the LSCOLORS environment
variable as described in the manual page.)
Colour support is silently disabled (if switched on) if stdout
isn't a tty.
Based on: asami's colorls port.
PR: bin/18900 && ports/18616.
date is launched with the "u" argument. It now operates in the documented
manner.
Fix typo in date man page.
Submitted by: David McNett <nugget@slacker.com>
case), so that it doesn't clash with the ncurses function of the same
name when linking statically with -ltermcap.
The linker only complains when -static is used, and it is not clear
whether this is a bug.
PR: bin/18104
Submitted by: Anatoly Vorobey <mellon@pobox.com>
spaces reserved by the header files it includes.
mkinit.c still produces C code with redundant declarations, although
they are more harmless since they automatically derived from the right
places.
This gets rid of a bogus cast of NULL in setbuf().
Lets us know the buffer malloc failed.
Reworks the manpage a bit to make it more mdoc(7) compliant, adds
examples.
things get a bit out-of-phase when we step backwards 1 hour from
between 0:00 and 1:00 on the first of the month following the
transition into Summer time. This is probably actually a bug
in mktime().
PR: 10963
If mktime() fails and 68 < year < 138, assume that the reason is
because of Summer time and adjust up or down according to our
adjusting context by one hour. This assumes that all DSTs are
multiples of 1 hour.
PR: 6223, 17750
cases and broke the world in some cases.
Fixed some style bugs (the usual ones for DPADD and LDADD, misplacement
of DPADD and LDADD, and misplacement of $FreeBSD$).
operands. Can _YOU_ tell skip= and seek= apart with 100% accuracy
every time?
This also seems to make us option-for-option compatible with the
Solaris dd(1).
Approved by: jkh
Suggested by: peter
The description of -X option in csh(1) manpage uses a wording
that references the descriptions of -x, -v and -V. This might
be a little confusing. Changed this to a complete description
that does not reference other paragraphs.
PR: 16762
Submitted: Giorgos Keramidas <keramida@ceid.upatras.gr>
The first paragraph of "Argument list processing" says that an
argument of - will make csh be a login shell. However, running
csh with only a - as an argument fails with the error message.
csh(1) corrected to reflect this.
PR: 16754
Submitted by: Giorgos Keramidas <keramida@ceid.upatras.gr>
Three minor changes to the manpage of chmod(1).
1. At the description of -H option, I added that symlinks are
not followed _by default_ to show that links can be followed,
but the default chmod behavior is not to do so.
2. Moved a misplaced .Va file command up to the place it belongs.
3. Simplified the grammar that describes symbolic modes.
PR: 16749
Submitted by: Giorgos Keramidas <keramida@ceid.upatras.gr>
interface, and statically link them to the programs using them.
These functions, upon reflection and discussion, are too generically
named for a library interface with such specific functionality.
Also the api that they use, whilst ok for private use, isn't good
enough for a libc function.
Additionally there were complications with the build/install-world
process. It depends heavily upon xinstall, which got broken by
the change in api, and caused bootstrap problems and general mayhem.
There is work in progress to address future problems that may be
caused by changes in install-chain tools, and better names for
{g|s}etflags can be derived when some future program requires them.
For now the code has been left in src/lib/libc/gen (it started off
in src/bin/ls).
It's important to provide library functions for manipulating file
flag strings if we ever want this interface to be adopted outside
of the source tree, but now isn't necessarily the right moment
with 4.0-release just around the corner.
Approved: jkh
string to u_long and back using two functions, flags_to_string and
string_to_flags, which co-existed with 'ls'. As time has progressed
more and more other tools have used these private functions to
manipulate the file flags.
Recently I moved these functions from /usr/src/bin/ls to libutil,
but after some discussion with bde it's been decided that they
really ought to go in libc.
There are two already existing libc functions for manipulating file
modes: setmode and getmode. In keeping with these flags_to_string
has been renamed getflags and string_to_flags to setflags.
The manual page could probably be improved upon ;)
. add Xrs to hosts.equiv(5), auth.conf(5), services(5) to some pages
. sort Xrs in SEE ALSO sections
Patches based on PR: docs/15680
Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de>
from the source attributed below. In particular, this removes a goto
inside a switch and replaces those horrendous ATOI macros with
something acceptable.
More clean-ups to come.
PR: bin/14151
Reported by: Christian Weisgerber <naddy@mips.rhein-neckar.de>
Obtained from: NetBSD
common way of setting the hostname. The man page already mentioned that
the hostname is set by /etc/rc.network, so this just explains where
/etc/rc.network gets the hostname from.
PR: docs/14319
Submitted by: rwatson
Reviewed by: cmc
respectively, in accordance with SUSv2.
This differs from the approach taken in NetBSD, but provides
less obscure error messages in at least the EISDIR case and
does not take up additional disk space for new binaries.
PR: 13071
PR: 13074
Requested by: James Howard <howardjp@wam.umd.edu>
Obtained from: parts of human readable code from OpenBSD
Reviewed by: obrien
add POSIX, byte and megabyte block size ouput flags
PR: 13579 (POSIX flag)
Submitted by: Mike Meyer <mwm@phone.net>
bfumerola for that pointer!) in GCC complaining about losing a const.
While I'm here, might as well mark in the Makefile that I'm the
${MAINTAINER}. It seems like that's what everyone's doing these days.
in that revision as well as things I broke in that revision. A note-
worthy instance of the latter case was the inversion of -E and -V in the
subsection on Commandline Editing.
Turn off setgid-kmem for /bin/ps, it's now quite functional without it.
ps no longer needs /dev/*mem or /proc. (It will still use some /proc
files if they are available for -e, but it's not required, so it'll
happily run in a jail or chroot).
The proc stats are now part of eproc (obtained via sysctl) and no longer
needs to beat up the u-page reading code and the problems with that.
This also has the side effect of disabling 'ps -e' for normal users
*EXCEPT* when looking at their own processes. ie: they can see
environments in processes with their uid, enforced by the ownership of
/proc/*/mem. Root can still see them all, as it can open all /proc/*/mem.
This fixes some nasty procfs problems for SMP, makes ps(1) run much faster,
and makes ps(1) even less dependent on /proc which will aid chroot and
jails alike.
To disable this facility and revert to previous behaviour:
sysctl -w kern.ps_arg_cache_limit=0
For full details see the current@FreeBSD.org mail-archives.
than two processes (got that? :-), the stdin fd of the middle
processes that has just been set up was accidetially closed. Don't do
this.
PR: bin/14527
be ignored by default by the df(1) program. This is used mostly to
avoid stat()-ing entries that do not represent "real" disk mount
points (such as those made by an automounter such as amd.) It is
also useful not to have to stat() these entries because it takes
longer to report them that for other file systems, being that these
mount points are served by a user-level file server and resulting in
several context switches. Worse, if the automounter is down
unexpectedly, a causal df(1) will hang in an interruptible way.
PR: kern/9764
Submitted by: Erez Zadok <ezk@cs.columbia.edu>
This is a conservative change. It does the same thing in weird
cases like the old one. For example, 'sleep abcd' still sleeps
for zero seconds. `sleep 10.a' and `sleep 10.05aa' do the best
and not abort (ie: 10.a == 10 seconds, 10.05a == 10.05 seconds).
what I was trying to do work much better (ie at all. I could have sworn
it was working...) Fix a SEEK_SET to be SEEK_CUR, and make Bruce's
lseek() test work correctly.
useful as a seeking-tool as well as its many other uses. Previously,
dd(1) would succeed with count=0, but wouldn't get to the point that
blocks were to be read/written. This is a more useful behavior, and
this specific case doesn't seem to be handled by POSIX.
commit and those which cause ugly nroff output have been fixed, since
the purpose of the style guideline which they contravene is to reduce
the sizes of deltas.
Reported by: bde
rm must not use FTS_NOCHDIR, since chdir'ing is required for removing
deep directory trees and the ability to remove such trees is required
by POSIX.2 and POLA. The breakage didn't make much difference until
recently, since fts(3) didn't work in deep directory trees. It isn't
clear whether using FTS_NOCHDIR ever fixed anything (Net/2's rm.c is
similar to Lite1's). Perhaps it was actually to limit the damage
caused by the fts bug.
BDEification process of dd(1). Most of the changes are from BDE's archive.
Support for negative offsets is gone again, but the case where you
lseek() onto byte -1 of something from a negative offset using seek/skip
is fixed; if you end up on -1, you won't get a false positive lseek failure.
The biggest changes are to data types (more size_t, for instance) and
argument parsing. skip/seek on /dev/{,k}mem now occurs (instead of "read
until you reach the offset") due to mem devices now being D_DISK. Some
const things are now correctly declared as such, and the "case table"
building is better. The only thing that seems to be left to make dd(1)
everything TOG wants it to be is l10n.
* Consistently misspell built-in as builtin.
* Add a builtin(1) manpage and create builtin(1) MLINKS for all shell
builtin commands for which no standalone utility exists. These MLINKS
replace those that were created for csh(1).
* Add appropriate xrefs for builtin(1) to the csh(1) and sh(1) manpages,
as well as to the manpages of standalone utilities which are supported
as shell builtin commands in at least one of the shells. In such
manpages, explain that similar functionality may be provided as a
shell builtin command.
* Improve sh(1)'s description of the cd builtin command. Csh(1) already
describes it adequately. Replace the cd(1) manpage with a builtin(1)
MLINKS link.
* Clean up some mdoc problems: use Xr instead of literal "foo(n)"; use
Ic instead of Xr for shell builtin commands.
* Undo English contractions.
Reviewed by: mpp, rgrimes
Fix grammar and spelling nits.
Use .Dq and .Qq where appropriate.
Divorce trailing punctuation from quoted elements.
Use .Dq instead of .Xr for builtins.
Remove trailing whitespace and blank lines.
PR: 13340
`opaque', fix reversed description of `nodump', and don't use
`nodump' as an example of adding a `no' prefix since the double
negative would be confusing (it's still confusing -- the implicitly
documented `nonodump' flag doesn't exist).)
To quote their ls(1) specification:
-n
The same as -l, except that the owner's UID and GID numbers are
written, rather than the associated character strings.
Reviewed by: green
Use an upward approximation of the number of characters required
for decimal representations of uid_t, gid_t and u_quad_t, intead
of arbitrary values that may not be safe in the future.
Fix disordering.
Requested by: bde
supposedly it's ksh-derived, and it's not broken in pdksh. I've added
a test for test running as root: if testing for -x, the file must be
mode & 0111 to get "success", rather than just existant.
Reviewed by: chris
significantly easier to read and extend and offers a few new tests.
A few style changes taken from style(9) and OpenBSD, as well as
whitespace cleanups.
This change was discussed on freebsd-committers and freebsd-hackers
and met with approval from at least des, eivind and brian.
PR: 13091
Obtained from: NetBSD
in a long (-l) listing.
MFC-jockies should make sure that bde's concerns regarding the number
of digits required to represent a uid_t and the use of snprintf
on the associated PR have been addressed before going wild.
PR: 12866
Reported by: Philip Kizer <pckizer@nostrum.com>
Obtained from: NetBSD
request of Bruce. More changes may follow later. 'g' multiplier has
been added (i.e. dd seek=5g if=bigfile.) Some minor corrections were made
as well.
Noticed by: bde
add a -j flag that tells date not to try to set the date. This allows you
to use date as a userland interface to strptime.
example:
TZ=GMT date -j -f "%a, %d %b %Y %T %Z" "Sun, 08 Nov 1998 02:22:20 GMT" +%s
which is the standard format for Last-modified headers in HTTP requests.
only one to respond: eivind
This is a seriously beefed up chroot kind of thing. The process
is jailed along the same lines as a chroot does it, but with
additional tough restrictions imposed on what the superuser can do.
For all I know, it is safe to hand over the root bit inside a
prison to the customer living in that prison, this is what
it was developed for in fact: "real virtual servers".
Each prison has an ip number associated with it, which all IP
communications will be coerced to use and each prison has its own
hostname.
Needless to say, you need more RAM this way, but the advantage is
that each customer can run their own particular version of apache
and not stomp on the toes of their neighbors.
It generally does what one would expect, but setting up a jail
still takes a little knowledge.
A few notes:
I have no scripts for setting up a jail, don't ask me for them.
The IP number should be an alias on one of the interfaces.
mount a /proc in each jail, it will make ps more useable.
/proc/<pid>/status tells the hostname of the prison for
jailed processes.
Quotas are only sensible if you have a mountpoint per prison.
There are no privisions for stopping resource-hogging.
Some "#ifdef INET" and similar may be missing (send patches!)
If somebody wants to take it from here and develop it into
more of a "virtual machine" they should be most welcome!
Tools, comments, patches & documentation most welcome.
Have fun...
Sponsored by: http://www.rndassociates.com/
Run for almost a year by: http://www.servetheweb.com/
statement if blocks[*] when the else could be ambiguous, not defaulting
to int type and removal of some unused variables.
[*] This is explicitly allowed by style(9) when the single statement
spans more than one line.
Reviewed by: obrien, chuckr
by default, file(1) does not follow symlinks, the -L flag must be
specified.
PR: docs/8602
Submitted by: Kazuo Horikawa <k-horik@yk.rim.or.jp>
Reviewed by: nik
representation of the expression is quoted. Take care of this when
doing pattern matching in conjunction with trimming.
#!/bin/sh
c=d:e; echo "${c%:e}"
PR: NetBSD PR#7231
Noticed by: Havard Eidnes <Havard.Eidnes@runit.sintef.no>
and CPU runtime because it can't access the user area via /proc/<pid>/mem.
This is because the uarea is not mapped into the process address space
at USRSTACK on the alpha like it is on the x86.
Since I'm haven't been able to wrap my brain around the VM system enough
to be able to figure out how to achieve this mapping, and since it's
questionable that such an architectural change is correct, I implemented
a workaround to allow ps(1) to read the uarea from /dev/kmem using
kvm_read() instead of from the process address space via kvm_uread().
The kludge is hidden inside #ifdef __alpha__/#endif so as not to impact
the x86. (Note that top(1) probably uses this same gimmick since it works
on FreeBSD/alpha.)
Reviewed by: dfr
make /etc/rc interruptible in cases when programs hang with blocked
signals) isn't standard enough.
It is now switched off by default and a new switch -T enables it.
You should update /etc/rc to the version I'm about to commit in a few
minutes to keep it interruptible.
This takes the conditionals out of the code that has been tested by
various people for a while.
ps and friends (libkvm) will need a recompile as some proc structure
changes are made.
Submitted by: "Richard Seaman, Jr." <dick@tar.com>
Submitted by: "Richard Seaman, Jr." <lists@tar.com>
Obtained from: linux :-)
Code to allow Linux Threads to run under FreeBSD.
By default not enabled
This code is dependent on the conditional
COMPAT_LINUX_THREADS (suggested by Garret)
This is not yet a 'real' option but will be within some number of hours.
pattern matches will occur at offset zero of the source string. The bug causes
the input source string pointer to be incremented by the offset of the end of
the match, instead of it's length. The fix is to only increment the pointer by
the length of the pattern match (eo-so).
Of course, the one example in the man page shows a situation where the match
occurs at offset 0.
Submitted by: John W. DeBoskey <jwd@unx.sas.com>
Obtained from: freebsd-current@freebsd.org
for regular files. This fixes recent breakage of cp'ing from /dev/zero.
/dev/zero doesn't support mmap(), but the device driver mmap routines are
not called for mapping 0 bytes, so the error was not detected. mmap()
can't even be used for cp'ing special files that support mmap(), since
there is general way to determine the file size.
execvp() in the child branch of a vfork(). Changed to use fork()
instead.
Some of these (mv, find, apply, xargs) might benefit greatly from
being rewritten to use vfork() properly.
PR: Loosely related to bin/8252
Approved by: jkh and bde
tag support. These changes have been tested with a Breeze Hill
Q47 DLT and a DEC DLT2500 media changer. The latter has no
volume tag support.
The chio(1) command was updated to include various flags to the
status subcommand. These flags can be used to select additional
information to be displayed (like volume tags).
A new chio(1) subcommand named 'voltag' has been added which allows
for changes to volume tags inside the media changer controller.
This could not be tested as the Q47 does not provide the functio-
nality.
Submitted by: Hans Huebner
Don't output double-quotes inside variable expansion/arithmetic
expansion region in here-documents. When leaving the arithmetic
expansion syntax mode, adjust the dblquote flag according to
previous syntax, in order to avoid splitting of quoted variables.
foreground child is running. Formerly, traps were exceuted after the
next child exit.
The enables the user to put a breaking wrapper around a blocking
application:
(trap 'echo trap ; exit 1' 2; ./pestyblocker; echo -n)
The "echo -n" after the child call is needed to prevent sh from
optimizing the trap-executing shell away. I'm working on this.
multiple times when performing nested variable expansion, and
preserve some quoting information in order to avoid removing
apparently empty expansion result.
i.e. this makes emacs usable from system(3). Programs called from
shellscripts are now required to exit with proper signal status. That
means, they have to kill themself. Exiting with faked numerical exit
code is not sufficient.
Exit with proper signal status if script exits on signal.
Make the wait builtin interruptable, both with and without traps set.
Use volatile sig_atomic_t where (and only where) appropriate.
(Almost) fix printing of newlines on SIGINT.
Make traps setable from trap handlers. This is needed for shellscripts
that catch SIGINT for cleanup work but intend to exit on it, hance
have to kill themself from a trap handler. I.e. mkdep.
While I'm at it, make it -Wall clean. -Wall is not enabled in
Makefile, since vararg warnx() macro calls in usr.bin/printf/printf.c
are not -Wall-able.
PR: 1206
Obtained from: Basic SIGINT fix from Bruce Evans
effectively overriding the dynamically-sized-column feature. This
is mostly useful for non-interactive use, where it may be necessary
to ensure that listings taken at different times have columns that
line-up correctly. I have been assured that at least one large,
well-known program will soon be taking advantage of this. :-)
PR: bin/7011
Submitted by: Joel Ray Holveck <joelh@gnu.org>
Removed explicit dependencies of foo.o on foo.c. These were mainly
placeholders for comments about missing dependencies of tools objects
on headers. This problem needs to be handled more generally.
Use /dev/null for opening the kvm library, we don't need access to /dev/mem
anymore.
ps can now run without the setgid(kmem) bit. If it does it will not be
able to show argv/envp for another uid's processes unless you are root.
This should calm down attempts to `cp -p' to a nfs mount or some other
filesystem that doesn't accept flags or all combinations of flags.
It will warn if it fails to change flags though.
Clean up (or if antipodic: down) some of the msgbuf stuff.
Use an inline function rather than a macro for timecounter delta.
Maintain process "on-cpu" time as 64 bits of microseconds to avoid
needless second rollover overhead.
Avoid calling microuptime the second time in mi_switch() if we do
not pass through _idle in cpu_switch()
This should reduce our context-switch overhead a bit, in particular
on pre-P5 and SMP systems.
WARNING: Programs which muck about with struct proc in userland
will have to be fixed.
Reviewed, but found imperfect by: bde
true in /etc/make.conf. Both qmail and smail use a different rmail, so
replacing rmail is a Bad Thing.
PR: 6762
Reviewed by: phk
Submitted by: Bill Trost <trost@cloud.rain.com>
All the rest work! Actually, I don't know if chio works because I can't
test that. df can be built using NetBSD's mount.h. ps depends on libkvm
so there is no point trying.
o Added the -H and -P options for treatment of symbolic links.
o Removed the #ifdef BSD4_4_LITE, since it does not seem to do anything
useful
o Fixed up prn_octal() so its output looks more like that of AT&T Unices
when -b is given.
The next two lines apply only to the first two changes above:
PR: bin/6140
Submitted by: Max Euston
o Added a new '-b' which behaves as in AT&T Unices (show unprintables in
octal, using C escape codes when possible)
o Added '?' to the getopt() string, since the code in the switch considers
it as a valid option.
specifies exiting with a zero status if the file was copied
successfully, and with a nonzero status if an error occurred. We
are too sloppy to tell if the file was copied successfully when we
get killed by a SIGINT, but it is unlikely to have been. Added a
comment about related sloppiness (calling exit() from a signal
handler).
urgent need is when you run sh around a program that intentionally
uses SIGQUIT/SIGINT for asynchronous events, i.e. $EDITOR started from
system(2), like many mailers do. This fixes PR bin/1206 and possibly
bin/4241.
The solution committed has been tested for a large number of possible
cases (see recent discussion on cvs-committers). I completed a make
world, made sure 'make world' is interruptable and used the changed
/bin/sh as a login shell all day, including job control and using
SIGQUIT-catching programs (to write this message :-).
PR: bin/1206
Reviewed by: discussion on cvs-commiters
printed a bogus warning with a stale errno if write() returns a short
count. Now we continue copying. We still print a bogus warning if
write() returns an "impossible" short count of 0.
that this source is compiled against. This source is referenced by
install which is needed as a build tool and must be able to compile
against NetBSD headers and libraries if we have a hope of supporting
another architecture.
With this change, that's two working programs down and 3945 (?) to go.
The other one was make, but that didn't need any changes to work under
FreeBSD/Alpha. 8-)
following of the symlink for `rmdir symlink/' and is unnecessary
for ordinary directories (POSIX doesn't require rmdir(1) to do
anything for trailing slashes; it requires rmdir(2) to let them
"refer to a directory", and following the symlink for symlink/ is
what BSD does). This also fixes bugs in the slash-stripping code
(for paths consisting entirely of slashes, the pointer into the
string was decremented to "before" the beginning of the string,
and the path was at best stripped to "".
The behaviour is unchanged except for the final directory for
`rmdir -p ...'. There is no alternative to stripping intermediate
slashes since they must be specified. The sloppy slash-stripping
code is adequate for intermediate directories, since the all-slashes
case fails early.
> Error out if someone tries to mv a mount point. Old behavior was to
> move all files contained in the mounted filesystem to the dest. dir
> which could be quite nasty. Personally, I think rename(2) should
> return EPERM or EINVAL instead of EXDEV.
Obtained from: OpenBSD mv.c rev 1.6 by Todd Miller <millert@openbsd.org>
for users who are root, or in group wheel. This is useful on large timesharing
systems where a PS command can cause the system to grind to a halt. The
ability to get the information isn't diminished for those who really need the
additional detail (administrators.) Normal users won't see any difference unless
the processes are swapped out. The "really get it mode" is invoked by the
use of an additional flag in the command string "-f". New/old behavior is
selectable with a compile option.
PR: 5196
Submitted by: Matt Dillon <dillon@best.net>
Obtained from: Whistle Communications tree
Add an option to the way UFS works dependent on the SUID bit of directories
This changes makes things a whole lot simpler on systems running as
fileservers for PCs and MACS. to enable the new code you must
1/ enable option SUIDDIR on the kernel.
2/ mount the filesystem with option suiddir.
hopefully this makes it difficult enough for people to
do this accidentally.
see the new chmod(2) man page for detailed info.
cast value that was always ignored. Rev.1.9 of trap.c made this
more bogus by returning a semantically different value after calling
siginterrupt(). Avoid these problems by not returning a value.
trap 'echo xxx' 1 2 3 15
read x
is not interrupted by ^C (due to restartable read syscall) and must be
interrupted per POSIX
Worse case:
read -t 5 x
hangs forever after ^C pressed (supposed to timeout after 5 secs)
Fixed by adding siginterrupt(signo, 1) after catch handler installed
2) Do not reinstall sighandler immediately after it is called,
BSD do it for us
'read' command to return an error if the user fails to supply any
input withink a given time period. The behaviour of this option is
similar to that of the like-named option in ksh93.
Reviewed by: joerg
is also set.
Change osync to not to tack on an empty block if the input buffer is null,
or an even multiple of the blocksize.
Also change osync to pad the output with nulls/spaces depending whether
this is a block-oriented conversion or not (same as sync).
PR: 3818
VM structure (eg: credentials etc) and it's highly unlikely we'll ever
get to see the "tainted" BSD<=4.3 VM code in public use. Although it
indicated the way some things used to be done, it obfuscates things too
much.
These changes add the ability to specify that a UFS file/directory
cannot be unlinked. This is basically a scaled back version
of the IMMUTABLE flag. The reason is to allow an administrator
to create a directory hierarchy that a group of users
can arbitrarily add/delete files from, but that the hierarchy
itself is safe from removal by them.
If the NOUNLINK definition is set to 0
then this results in no change to what happens normally.
(and results in identical binary (in the kernel)).
It can be proven that if this bit is never set by the admin,
no new behaviour is introduced..
Several "good idea" comments from reviewers plus one grumble
about creeping featurism.
This code is in production in 2.2 based systems
OpenBSD version for more complete fixes. E.g., to seek to offsets >
INT_MAX using a block size of 1, block numbers need to be off_t's
instead of u_long's.
appears, not the longest _maximum_ username (this should probably also go
into 2.2, for the day when we bump up the username length there too).
Submitted-By: Terry Lambert <terry@lambert.org>
1) Fix mkdir -p to exit with the proper exit status and issue an error
message if it was unable to create all of the specified directories
and they did not previously exist. POSIX says:
The mkdir utility shall exit with one of the following values:
0 All the specified directories were created successfully or the
-p option was specified and all the specified directories now
exist.
E.g.
% mkdir -p /var/mkdir
mkdir: /var/mkdir: Permission denied
% touch /tmp/file
% mkdir -p /tmp/file/dir
mkdir: /tmp/file: Not a directory
Previously the above examples would exit with a zero exit status
and no error message. Something like the following run as a
normal user will still not produce an error:
% id
uid=629(mpp) gid=629(mpp)....
% mkdir -p /usr/local/etc
% ls -ld /usr/local/etc
drwxr-xr-x 4 bin bin 512 Dec 26 14:55 /usr/local/etc/
2) Cleaned up the mode handling to be more efficient when multiple
directories are being created.
3) Fixed a problem where directories could be created with the wrong mode
if the the -p option was specified and the build() routine returned
and error. It would leave the umask set incorrectly at this point.
4) Removed an unused variable.
Closes PR# 2304.
- Use MAP_FAILED instead of the constant -1 to indicate
failure (required by POSIX).
- Removed flag arguments of '0' (required by POSIX).
- Fixed code which expected an error return of 0.
- Fixed code which thought any address with the high bit set
was an error.
- Check for failure where no checks were present.
Discussed with: bde
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
while remaining (becoming :) compatible with other popular shells.
Specifically these changes include:
1) Implement 'trap -l' to get a list of valid signals names. This
is useful if you wanted to do something like reset all signal
handlers to there defaults values, in which case something like
this will do the trick.
trap `trap -l`
2) Reformat the output of 'trap' so it can be saved and later eval'd
to restore the saved settings.
3) Allow the use of signal names as well as signal numbers.
4) Fix trap handling of SIGCHLD so that commands like the following
(albeit, contrived) won't cause sh(1) to recurse ad infinitum.
trap uname 0 20
5) Make variables static that are used only in trap.c.
6) Minor 'style(9) police' mods.
now handles the getpwd() init problem the same way as bash
and ksh do. Also while I was in here, I cleaned up the format
a little, removed some unnnecessary #if SYMLINKS cruft, and
changed the pwd builtin to use getcwd(3) as Joerg suggested.
getopts should now work as expected. This fix was in the NetBSD
code that I was merging from but missed getting into FreeBSD's
version because of 'drain bamage' on my part.
Submitted by: NetBSD, joerg
isofs while the df command itself used the name iso9660fs or
cdfs. Both of these were inconsistent with the name cd9660 which
is used by the mount command. I modified df to recognize all of
the names cd9660, cdfs, isofs, and iso9660fs, and take them all
to refer to the same thing. Naturally I added a note of this
behaviour in the manual page too.
Submitted-By: Jukka Ukkonen <jau@jau.csc.fi>
and he's right ... I forgot about this floating point stuff you can
use in user-land :-)
Increase precision of duration to microseconds.
No heuristics to avoid overflow in calculation needed - just depend
on DBL_MAX being a bit larger than LONG_MAX.
Use double instead of `struct timeval' in dd.h so that everything
doesn't have to include <sys/time.h>.
Fixed style bugs in recent and old FreeBSD changes.
Reviewed by: phk
Submitted by: bde
This patch causes too many side effects, one of which bites hard is
when interrupting a 'make fetch' in the ports tree (PR#1990).
This whole area is a real can of worms....
This most definately should go into 2.2
Reviewed by: steve, bde
so that simple regresssion tests based on `cmp' work. mkdep still
doesn't work right for these tools. They should probably be in
separate directories.
Sorted dependencies.
the full argument vector.
I've bumped into a few things that expected this switch to be present,
the most recent was the snmp package in ports. I'm not 100% sure of the
origins of this, but Linux has it, so does the "BSD-compatable" version
of ps on our SVR4 systems (so I assume SunOS has it too).
the 4.4 lite 2 tape as well. There are now only two diffs between
NetBSD's cat and FreeBSD's cat:
getopt return value is -1 on NetBSD and EOF on FreeBSD.
NetBSD has added setlocale calls before anything else.
face of aliases. Note, bash doesn't do aliases while running scripts, but
"real" ksh does..
Also:
Reduce redundant .Nm macros in (unused) bltin/echo.1
nuke error2, it's hardly used.
More -Wall cleanups
dont do certain history operations if NO_HISTORY defined
handle quad_t's from resource limits
Submitted by: Steve Price <sprice@hiwaay.net> (minor tweaks by me)
- don't put \n on error() calls, error adds it already.
- don't prepend "ulimit" on error() calls in miscbltin.c.
- getopt typo on ulimit -p -> -u conversion
- get/setrlimit() calls were not being error checked
ulimit formatting cleanup from me, use same wording as bash on Bruce's
suggestion. Add ulimit arg to output on Joerg's suggestion.
merge of parallel duplicate work by Steve Price and myself. :-]
There are some changes to the build that are my fault... mkinit.c was
trying (poorly) to duplicate some of the work that make(1) is designed to
do. The Makefile hackery is my fault too, the depend list was incomplete
because of some explicit OBJS+= entries, so mkdep wasn't picking up their
source file #includes.
This closes a pile of /bin/sh PR's, but not all of them..
Submitted by: Steve Price <steve@bonsai.hiwaay.net>, peter
cat command appeared in Version 1 AT&T UNIX, not Version 6
Apparently the cat man page was the first written man page
Obtained from: A Quarter Century of UNIX, Peter H. Salus
[BUGS]
fix a typo
Requested by: joerg
(Note, this is mostly going to be conflicts, which is expected. Our entire
sh source has a mainline, so this should not change anything except for
a few new files appearing. I dont think they are a problem)
all flag variables initialized with zero
respond `Y' is equal to `y'
update usage string
prompt only if source exist
ignore -i option if file descriptor stdin not refers to a valid
terminal type device
didn't correctly start background jobs anymore. Strange that nobody
was complaining...
Add a dummy target for `builtins' in the Makefile, to prevent it
from attempting to build this file by compiling builtins.c. :-/
This fixes PR943.
ffs/ffs_vfsops.c:
ffs_statfs() multiplied by (100 - minfree) as part of calculating the
minfree percentage (complemented in 100%), so with the standard minfree
of 8, it was broken for file systems of size >= 1TB/92 = 11GB. Use the
standard freespace() macro instead. This also fixes a rounding bug (the
"Avail" count was sometimes 1 too small).
ffs/* (not fixed):
The freespace() macro multiplies by minfree, so with the standard
minfree of 8, it is broken for file systems of size >= 1TB/8 = 128GB.
This bug is more serious since it affects block allocation.
ffs/ffs_alloc.c (not fixed):
Ordinary users are sometimes allowed to allocate 1 (partial) block
too many so that the "Avail" count goes negative. E.g., if there is
1 fragment available and the file is fairly large, one more full
block is allocated.
df/df.c:
ufs_df() used/uses essentially the same code as ffs_statfs(), so it
had/has the same bugs.
ufs_df() gratuitously replaced "Avail" counts of < 0 by 0, so it
gave different results for non-mounted file systems in this case.
. mention the need for procfs
. make it clear that default sorting is first by ctty, then by PID
Submitted by: schweikh@ito.uni-stuttgart.de (Jens Schweikhardt)
list the processes belonging to a particular user without having to use
`-u' and grepping for the username. Basically you can now get a short
`ps -x' like list (with more space for the command) for other users.
traditional behaviour, and it violates Posix.2.
Fixes PR # bin/880: /bin/sh incorrectly parse...
Fixes also an earlier problem report about the shell not evaluating
loops correctly. (Not files via GNATS.)
Submitted by: nnd@itfs.nsk.su (Nickolay N. Dudorov)
This means that a script containing:
echo 1
set -v
echo 2
will now produce output, like it does on SYSV machines and other 'proper'
/bin/sh implementations..
This is done by a slight restructure of the input processor allowing it to
read chunks from the file at a time, but process the data by line from the
chunk.
Obtained from: Christos Zoulas for NetBSD. <christos@deshaw.com>
o fix brokeness for 1>&5 redirection, where `5' was an invalid file
descriptor, but no error message has been generated
o fix brokeness for redirect to/from myself case
command and badly needed in sh(1) for everybody who wants to modify
the system-wide limits from inside /etc/rc.
The options are similar to other system's implemantations of this
command, with the FreeBSD additions for -m (memoryuse) and -p (max
processes) that are not available on other systems.
`mv foo/ ../..' to `mv foo/ ../../foo/', not to `mv foo/ ../../'. The
latter caused a panic. Before the trailing slash changes in the kernel,
the trailing slashes caused the rename() for this mv to fail earlier, so
there was no panic in 2.0.
Fixes part of PR 760.
sh -c [-aCefinuvx] command_string [ command_name [argument ...] ] 1
4.56.3 Options
-c Read commands from the command_string operand. Set the
value of special parameter 0 (see 3.5.2) from the value of
the command_name operand and the positional parameters
($1, $2, etc.) in sequence from the remaining argument
operands.
Pointed out by: Kaleb Keithly (kaleb@x.org)
allow more than two tty characters.
David Greenman pointed out that when a process that had been revoked from
it's controlling tty, the "-" sign was detached from any two-character
names.
/usr/sbin/sendmail -f <> dest
rather than
/usr/sbin/sendmail -f dest.
Submitted by: Michael Butler <imb@scgt.oz.au>
Obtained from: Eric Allman <eric@cs.berkeley.edu>
This gives us more room to breath with tty names, especially with drivers
that support large numbers of ports.. eg: specialix and digiboard.
This does not actually change the current tty names, it just allows room
for reporting more characters if the drivers use them.
When comparing my recent parser change against the ash in 1.1.5.1, i
found that a couple of other problems in the same area has been fixed
there, but not in 2.2. Semicolons and EOF do also delimit words...
