sbt is the time in the future that the tsleep_sbt() is expected to be completed
at. sbtt is the current time. Depending on the precision with sysctl
kern.timecounter.alloweddeviation the start time may be incremented by
tc_tick_sbt. The same increment is needed for the current time of sbtt before
calculating the difference. The impact of missing this increment is that rmtp
may increase by one tc_tick_sbt on every early [EINTR] return. If the same
struct is passed in for rqtp as rmtp this can result in rqtp effectively
incrementing by tc_tick_sbt and sleeping longer than originally intended.
This problem was introduced in r247797.
Reviewed by: kib, markj, vangyzen (all on an older version of the test)
MFC after: 2 weeks
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D14362
sparc64 and riscv do not support 10 arguments, but MIPS now does.
While here, combine clauses for architectures that support the same
number of arguments to reduce duplication.
Sponsored by: DARPA / AFRL
The man page is years out of date regarding errors. Our implementation _does_
allow unaligned addresses, and it _does_not_ check for negative lengths,
because the length is unsigned. It checks for overflow instead.
Update the tests accordingly.
Reviewed by: bcr
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D13826
Currently, regex(3) exhibits the following wrong behavior as demonstrated
with sed:
- echo "a{1,2,3}b" | sed -r "s/{/_/" (1)
- echo "a{1,2,3}b" | sed "s/\}/_/" (2)
- echo "a{1,2,3}b" | sed -r "s/{}/_/" (3)
Cases (1) and (3) should throw errors but they actually succeed, and (2)
throws an error when it should match the literal '}'. The correct behavior
was decided by comparing to the behavior with the equivalent BRE (1)(3) or
ERE (2) and consulting POSIX, along with some reasonable evaluation.
Tests were also adjusted/added accordingly.
PR: 166861
Reviewed by: emaste, ngie, pfg
Approved by: emaste (mentor)
MFC after: never
Differential Revision: https://reviews.freebsd.org/D10315
o Replace __riscv64 with (__riscv && __riscv_xlen == 64)
This is required to support new GCC 7.1 compiler.
This is compatible with current GCC 6.1 compiler.
RISC-V is extensible ISA and the idea here is to have built-in define
per each extension, so together with __riscv we will have some subset
of these as well (depending on -march string passed to compiler):
__riscv_compressed
__riscv_atomic
__riscv_mul
__riscv_div
__riscv_muldiv
__riscv_fdiv
__riscv_fsqrt
__riscv_float_abi_soft
__riscv_float_abi_single
__riscv_float_abi_double
__riscv_cmodel_medlow
__riscv_cmodel_medany
__riscv_cmodel_pic
__riscv_xlen
Reviewed by: ngie
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11901
BREs recently became prematurely sensitive to the branching operator, which
outright broke expressions that used it instead of failing silently. Test
that \| is matching a literal | for the time being.
Reviewed by: cem, emaste, ngie
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D11577
ATF cleanup routines run in separate processes from the tests themselves, so
they can't share global variables.
Also, setdomainname_test needs to be is_exclusive because the test cases
access a global resource.
PR: 219967
Reviewed by: ngie
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D11188
the limit to 32MB instead.
Require user=root and memory=64MB+ first so one can be reasonably sure that
the test will function appropriately.
MFC after: 1 month
MFC with: r320726
PR: 220502
The kern.coredump sysctl can be set to 0 to disable coredumps. Skip the
'status_coredump' and 'wait6_coredumped' tests if this sysctl is set to 0
rather than reporting a failure.
Submitted by: brooks
Reviewed by: ngie
Obtained from: CheriBSD
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D10665
This is being done to avoid dereferencing a NULL pointer via strlcat,
obscuring the underlying issue with the getcwd(3) call.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
- Apply the logic to the FreeBSD block
- Fix a typo with the getconf(1) call that I would have caught, were
it not for the fact that I got the blocks wrong.
- Consolidate the hardcoded buffer sizes to the NetBSD block.
This would have been discovered had I run the test on a system where
PATH_MAX != 1024 (I don't have that at my disposal right at this moment).
MFC after: 3 weeks
MFC with: r318210
Sponsored by: Dell EMC Isilon
In the event the value of PATH_MAX was changed, the assumption that
MAXPATHLEN is 1024 (and hence the buffer length required to trigger
SSP to fail for read(2)) would be invalidated. Query getconf(1) for
the actual value of MAXPATHLEN via _XOPEN_PATH_MAX instead, and
increment the value by 1 to ensure that the SSP support tests the
stack smashing support properly.
MFC after: 3 weeks
Sponsored by: Dell EMC Isilon
Restore the stock (upstream) code under an #else block, so it's easier
for me to visualize and understand the code that needs to be upstreamed.
MFC after: 2 months
X-MFC with: r316178, r316179, r316180
Sponsored by: Dell EMC Isilon
msgsnd(2)'s msgsz argument does not describe the full structure, only the
message component.
Reported by: Coverity
CIDs: 1368703, 1368711
Sponsored by: Dell EMC Isilon
msgsnd's msgsz argument is the size of the message following the 'long'
message type. Don't include the message type in the size of the message
when invoking msgsnd(2).
Reported by: Coverity
CID: 1368712
Sponsored by: Dell EMC Isilon
This is no longer required as of r315616, as the test is no longer
built/installed.
This is being done to diff reduce with NetBSD.
Sponsored by: Dell EMC Isilon
Add a clock_nanosleep() syscall, as specified by POSIX.
Make nanosleep() a wrapper around it.
Attach the clock_nanosleep test from NetBSD. Adjust it for the
FreeBSD behavior of updating rmtp only when interrupted by a signal.
I believe this to be POSIX-compliant, since POSIX mentions the rmtp
parameter only in the paragraph about EINTR. This is also what
Linux does. (NetBSD updates rmtp unconditionally.)
Copy the whole nanosleep.2 man page from NetBSD because it is complete
and closely resembles the POSIX description. Edit, polish, and reword it
a bit, being sure to keep any relevant text from the FreeBSD page.
Reviewed by: kib, ngie, jilles
MFC after: 3 weeks
Relnotes: yes
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D10020
The reasoning for this is the same as r276046: to ease MFCing the tests
to ^/stable/10 .
This was accidentally missed in r313439
MFC after: 1 week
X-MFC with: r313439
Sponsored by: Dell EMC Isilon
This function allows the caller to specify the reference clock
and choose between absolute and relative mode. In relative mode,
the remaining time can be returned.
The API is similar to clock_nanosleep(3). Thanks to Ed Schouten
for that suggestion.
While I'm here, reduce the sleep time in the semaphore "child"
test to greatly reduce its runtime. Also add a reasonable timeout.
Reviewed by: ed (userland)
MFC after: 2 weeks
Relnotes: yes
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D9656
There are some potential issues with the test (as brd@ has pointed out
elsewhere) with precision, etc not being set before the test, but as
always, more research is required.
The docs and the behavior mismatch; as noted in the bug, the behavior
for hsearch_r matches Linux, whereas the docs seem to match NetBSD
requirements wise.
PR: 216872
It was used for nitems, but I converted it to __arraycount later, and
is already pulled in by header pollution on FreeBSD as well as NetBSD
ala sys/cdefs.h
