vt_allocate_keyboard only needs to unwind the effects of keyboard-grabbing,
rather than any associated vt window action that may have also happened.
Split out the bits that do the keyboard work into *_noswitch equivalents,
and use those in keyboard allocation. This will be less error-prone when a
later change will offer up different window state behavior when the console
is ungrabbed.
Reviewed by: ray
Differential Revision: https://reviews.freebsd.org/D27110
Implement vt_vbefb to support Vesa Bios Extensions (VBE) framebuffer with VT.
vt_vbefb is built based on vt_efifb and is assuming similar data for
initialization, use MODINFOMD_VBE_FB to identify the structure vbe_fb
in kernel metadata.
struct vbe_fb, is populated by boot loader, and is passed to kernel via
metadata payload.
Differential Revision: https://reviews.freebsd.org/D27373
When using the ALT+CTRL+ESC sequence to break into kdb, the keyboard is
completely borked when you return. watch(8) shows that it's working, but
it's inserting escape sequences.
Further investigation revealed that VT_ALT_TO_ESC_HACK is the default and
directly conflicts with this sequence, so upon return from the debugger
ALKED is set.
If they triggered the break to debugger, it's safe to assume they didn't
mean to use VT_ALT_TO_ESC_HACK, so just unset it to reduce the surprise when
the keyboard seems non-functional upon return.
Reviewed by: tsoome
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27109
vt_generate_cons_palette() does take max values of RGB component colours, not
mask. Also we need to set info->fb_cmsize, or vt_fb_init() will re-initialize
the info->fb_cmap.
vm_ooffset_t is now unsigned. Remove some tests for negative values,
or make other adjustments accordingly.
Reported by: Coverity
Reviewed by: kib markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D26214
Currently the CONS_HISTORY and CONS_CLRHIST ioctls modify the state of the
active terminal instead of the terminal against which the ioctl was issued.
Because of the way vidcontrol(1) works, these are the same in most cases.
But a poorly-timed window switch can make them differ. This is reproducible
by issuing e.g. 'vidcontrol -s 2 && vidcontrol -C' to switch from vty 1 to
vty 2; teken will reset the cursor position on vty 1 but vt(4) will clear
the history buffer of vty 2, producing an interesting state of affairs.
Differential Revision: https://reviews.freebsd.org/D25564
Prepare support to be able to handle font data in loader, consolidate
data structures to sys/font.h and update vtfontcvt.
vtfontcvt update is about to output set of glyphs in form of C source,
the implementation does allow to output compressed or uncompressed font
bitmaps.
Reviewed by: bcr
Differential Revision: https://reviews.freebsd.org/D24189
r361601 implemented basic support for cleaing the console history buffer.
But after clearing the history buffer, it's not especially useful to be
able to scroll back through that buffer, or for the cursor position to
remain at (very likely) the bottom of the screen.
PR: 224436
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D25079
Extract scrollback buffer initialization into a common routine, used both
during vt(4) init and in handling the CONS_CLRHIST ioctl.
PR: 224436
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D24815
The reporter is developing a frame buffer driver for hardware using
3 bytes per pixel, but a stride that's a multiple of 256. Previously
this resulted in writing beyond the end of each stride. On the last
row this attempted to write past the end of the frame buffer, triggering
the assertion in vt_fb_mem_wr1().
PR: 243533
MFC after: 2 weeks
Submitted by: Thomas Skibo
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
This effectively reverts r355935, but is functionally equivalent. We gain no
benefit from storing the index and repeatedly fetching the keyboard with
`kbd_get_keyboard` when we need it. We'll be notified when it's going away
so we can clean up the pointer.
All existing references were trivially converted. Only once instance
actually needed the index.
With absolutely no keyboards attached and no kbdmux in kernel, we descend
down this error path. 0 is a valid keyboard index, so leaving
vd->vd_keyboard at 0 when there's no keyboard found is objectively wrong as
later attachment of a keyboard will fail -- it gets index 0, and vt thinks
it's already using that keyboard.
This is decidedly the corniest of corner cases, but it's easy enough to get
correct that we should do so.
Tested in a kernel without atkbdc, atkbd, psm, kbdmux, ukbd, hyperv then
loading ukbd post-boot and attaching a usb keyboard.
This change enables the use of OpenFirmware Console (ofwcons), even when VGA is
available, allowing early kernel messages to be seen, that is important in case
of crashes before VGA console initialization.
This is specially useful in virtualized environments, where the user/developer
doesn't have full control of the virtualization engine (e.g. OpenStack).
The old behavior is preserved by default and, in order to use ofwcons, a few
tunables that have been introduced need to be set:
- hw.ofwfb.disable=1 - disable OFW FrameBuffer device
- machdep.ofw.mtx_spin=1 - change PPC OFW mutex to SPIN type, to match kernel
console's mutex type
- debug.quiesce_ofw=0 - don't call OFW quiesce, needed to keep ofwcons I/O
working
More details can be found at differential revision D20640.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D20640
r259680 added support to vt(4) for printing double-width characters.
Remove the comment that claims no support.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
The TUNABLE_INT_FETCH is macro around getenv_int() and we will get
return value 0 or 1 for failure or success, we can use it to decide
which background color to use.
If there is an attempt to switch from a process-owned VT to a closed VT,
then vt(4) first requests the process to release its VT and only then
realizes that the target VT is closed and, so, the switch is not
possible. So, the driver does not actually do any switch, but at the
same time the owning process is not notified about that and it does not
re-acquire the VT.
This change adds an early check for the target VT state, so that the
switch can be refused before the process coordination dance.
On top of that, the code now checks for a failure of vt_window_switch()
and calls vt_window_postswitch() for the current VT if it is in the
process mode.
Test Plan:
- configure VT1 - VT8 (ttyv0 - ttyv7) to be text consoles (run getty)
- configure VT9 (ttyv8) to rn X server
- make sure that the X server configuration allows VT switching
- leave VT10 - VT12 unconfigured
- while in the X server press Ctrl+Alt+F10
- without the patch, observe strange screen content and problems with
keyboard input
- with the patch, observe that nothing happens
The problem has been observed and the fix has been tested with an nVidia
graphics card and the proprietary nvidia driver.
Not sure if that matters.
Reviewed by: ray
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21704
When the system has no graphical console, such as bhyve in common
configurations, ignore kern.vt.splash_cpu, instead of panicking
on INVARIANTS kernels.
Reviewed by: cem dumbbell
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20877
Using the latest NVIDIA driver, upon resuming from suspend with X
running the display remained blank. Additionally OpenGL applications
that were running triggered a number of error messages from the NVIDIA
driver.
This occurred because the vt efifb back-end did not signal the X server
to release the display before suspending (or to re-acquire it after
resuming). The NVIDIA driver includes code for smoothly shutting down
and re-initializing the GPU, which was not getting called.
Since the NVIDIA driver doesn't currently support framebuffer devices
and vt is forced to fall back to the efifb back-end, add vd_suspend and
vd_resume members to connect the suspend/resume path. This ensures the
X server is properly able to re-initialize the display.
PR: 237050
Submitted by: Erik Kurzinger <ekurzinger@nvidia.com>
Reviewed by: markj
MFC after: 2 weeks
Event: Waterloo Hackathon 2019
This allows replacing "sys/eventfilter.h" includes with "sys/_eventfilter.h"
in other header files (e.g., sys/{bus,conf,cpu}.h) and reduces header
pollution substantially.
EVENTHANDLER_DECLARE and EVENTHANDLER_LIST_DECLAREs were moved out of .c
files into appropriate headers (e.g., sys/proc.h, powernv/opal.h).
As a side effect of reduced header pollution, many .c files and headers no
longer contain needed definitions. The remainder of the patch addresses
adding appropriate includes to fix those files.
LOCK_DEBUG and LOCK_FILE_LINE_ARG are moved to sys/_lock.h, as required by
sys/mutex.h since r326106 (but silently protected by header pollution prior
to this change).
No functional change (intended). Of course, any out of tree modules that
relied on header pollution for sys/eventhandler.h, sys/lock.h, or
sys/mutex.h inclusion need to be fixed. __FreeBSD_version has been bumped.
done on the old keyboard and then do the corresponding number of grabs
on the new keyboard.
This fixes a race that can leave the system with a non-functioning
keyboard. It goes like this...
- The bios claims there is an AT keyboard, atkbd attaches.
- SI_SUB_INT_CONFIG_HOOKS runs.
- USB probes devices. Devices begin attaching, including disks.
- GELI prompts for a password for a just-attached disk, which results
in a cngrab() while atkbd is the keyboard.
- A USB keyboard attaches.
- vt_upgrade() runs and switches the keyboard to the new USB keyboard,
but because cngrab was never called for it, it's not activated and
keystrokes are ignored.
- Now there is no functional keyboard and no way to get one; even
plugging in a different USB keyboard doesn't help, because the console
is still grabbed, still waiting for a GELI pw.
Discussed with: ray@
given in random(4).
This includes updating of the relevant man pages, and no-longer-used
harvesting parameters.
Ensure that the pseudo-unit-test still does something useful, now also
with the "other" algorithm instead of Yarrow.
PR: 230870
Reviewed by: cem
Approved by: so(delphij,gtetlow)
Approved by: re(marius)
Differential Revision: https://reviews.freebsd.org/D16898
the foreground and background colours. In bitblt_text functions, compare
values to this cache and don't re-draw the characters if they haven't changed.
When invalidating the display, clear this cache in order to force characters
to be redrawn; also force full redraws between suspend/resume pairs since odd
artifacts can otherwise result.
When scrolling the display (which is where most time is spent within the vt
driver) this yields a significant performance improvement if most lines are
less than the width of the terminal, since this avoids re-drawing blanks on
top of blanks.
(Note that "re-drawing" here includes writing to the VGA text mode buffer; on
virtualized systems this can be extremely slow since it triggers a glyph
being rendered onto a 640x480 screen).
On a c5.4xlarge EC2 instance (with emulated text mode VGA) this cuts the time
spent in vt(4) during the kernel boot from 1200 ms to 700ms; on my laptop
(with a 3200x1800 display) the corresponding time is reduced from 970 ms down
to 155 ms.
Reviewed by: imp, cem
Approved by: re (gjb)
Relnotes: Significant speedup in vt(4) and the system boot generally.
Differential Revision: https://reviews.freebsd.org/D16723
The VGA "text mode" buffer has a pair of bytes for each character: One
byte for the character symbol, and an "attribute" byte encoding the
foreground and background colours. When updating the screen, we were
writing these two bytes separately.
On some virtualized systems, every write results in a glyph being redrawn
into a (graphical) virtual screen; writing these two bytes separately
results in twice as much work being done to draw characters, whereas if
we perform a single 16-bit write instead, the character only needs to be
redrawn once.
On an EC2 c5.4xlarge instance, this change cuts 1.30s from the kernel boot,
speeding it up from 8.90s to 7.60s.
MFC after: 1 week
/chosen/stdout-path is a string, not ihandle. Treat it as such.
With this, ofwfb now starts correctly on a POWER9 system when launched from
the local console (not serial).
The FDT implementation of OF_instance_to_package() backend checks the
cross-reference to get the node. On failure, this returns the input handle
unchanged. In the case of ofwfb attachment, if /chosen/stdout property does not
exist, sc->sc_handle is either garbage or 0, which then gets propagated to node.
This will prevent "screen" from being used, resulting in not properly attaching.
Correct this by matching the code in ofwfb_probe().
To workaround buggy firmware that sets this flag when there's actually
a VGA present.
Reported and tested by: Yasuhiro KIMURA <yasu@utahime.org>
Sponsored by: Citrix Systems R&D
Reviewed by: kib
Differential revision: https://reviews.freebsd.org/D16003
overscan and synthesize it from the display depth and screen width.
This may not be right, but it sometimes right and is better than
returning CN_DEAD.
MMU is disabled.
This expands some earlier logic and avoids a number of potential problems:
1. The CPU may not be able to access the framebuffer in real mode (real
mode does not necessarily encompass all available memory, especially
under a hypervisor).
2. Real mode accesses generally assume cacheability, so it might not
even have worked.
3. The difference in cacheability between real mode and later (and
potentially earlier) points in the boot with the MMU on may cause
ERAT parity problems, resulting in a machine check.
This fixes real-mode (usefdt=1) early boot on the G5 iMac, which was
previously broken as a result of issue #3. Late boot will require some
other fixups.
In UTF-8 locales mandoc uses a number of characters outside of the Basic
Latin group, e.g. from general punctuation or miscellaneous mathematical
symbols, and these rendered as ? in text mode.
This change adds (char, replacement, code point, description):
¦ | U+00A6 Broken bar
✓ √ U+2713 Checkmark
Sponsored by: The FreeBSD Foundation
There is no need to try to resume it after each smaller operations
(putchar, cursor_position, copy, fill).
The resume function already checks if the timer is armed before doing
anything, but it uses an atomic cmpset which is expensive. And resuming
the timer at the end of input processing is enough.
While here, we also skip timer resume if the input is for another
windows than the currently displayed one. I.e. if `ttyv0` is currently
displayed, any changes to `ttyv1` shouldn't resume the timer (which
would refresh `ttyv0`).
By doing the same benchmark as r333669, I get:
* vt(4), before r333669: 1500 ms
* vt(4), with this patch: 760 ms
* syscons(4): 700 ms
... to process input, instead of inside each smaller operations such as
appending a character or moving the cursor forward.
In other words, before we were doing (oversimplified):
teken_input()
<for each input character>
vtterm_putchar()
VTBUF_LOCK()
VTBUF_UNLOCK()
vtterm_cursor_position()
VTBUF_LOCK()
VTBUF_UNLOCK()
Now, we are doing:
vtterm_pre_input()
VTBUF_LOCK()
teken_input()
<for each input character>
vtterm_putchar()
vtterm_cursor_position()
vtterm_post_input()
VTBUF_UNLOCK()
The situation was even worse when the vtterm_copy() and vtterm_fill()
callbacks were involved.
The new callbacks are:
* struct terminal_class->tc_pre_input()
* struct terminal_class->tc_post_input()
They are called in teken_input(), surrounding the while() loop.
The goal is to improve input processing speed of vt(4). As a benchmark,
here is the time taken to write a text file of 360 000 lines (26 MiB) on
`ttyv0`:
* vt(4), unmodified: 1500 ms
* vt(4), with this patch: 1200 ms
* syscons(4): 700 ms
This is on a Haswell laptop with a GENERIC-NODEBUG kernel.
At the same time, the locking is changed in the vt_flush() function
which is responsible to draw the text on screen. So instead of
(indirectly) using VTBUF_LOCK() just to read and reset the dirty area
of the internal buffer, the lock is held for about the entire function,
including the drawing part.
The change is mostly visible while content is scrolling fast: before,
lines could appear garbled while scrolling because the internal buffer
was accessed without locks (once the scrolling was finished, the output
was correct). Now, the scrolling appears correct.
In the end, the locking model is closer to what syscons(4) does.
Differential Revision: https://reviews.freebsd.org/D15302
Before this change, the VGA palette was configured to match the shell
palette (e.g. color #1 was red). There was one glitch early in boot when
the vt(4)'s VGA palette was loaded: the loader's logo would switch from
red to blue. Likewise for the "Booting..." message switching from blue
to red. That's because the loader's logo was drawed with the default VGA
palette where a few colors are swapped compared to the shell palette
(e.g. blue <-> red).
This change configures the default VGA palette during initialization and
converts input's colors from shell to VGA palette index.
There should be no visible changes, except the loader's logo which will
keep its original color.
Reviewed by: eadler
This makes it more logical:
1. It checks the requested color format
2. It fills the palette accordingly
Also vt_palette_init() is only called when needed (i.e. when the format
is `COLOR_FORMAT_RGB`).
"Terminus BSD Console" is a derivative of Terminus that is provided
by Mr. Dimitar Zhekov under the 2-clause BSD license for use by the
FreeBSD vt(4) console and other BSDs.
PR: 227409
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
In UTF-8 locales mandoc uses a number of characters outside of the Basic
Latin group, e.g. from general punctuation or miscellaneous mathematical
symbols, and these rendered as ? in text mode.
This change adds (char, replacement, code point, description):
– - U+2013 En Dash
⟨ < U+27E8 Mathematical Left Angle Bracket
⟩ > U+27E9 Mathematical Right Angle Bracket
This change addresses some common cases; there are others that still
need to be added after a more thorough review.
PR: 227409
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
opt_compat.h is mentioned in nearly 180 files. In-progress network
driver compabibility improvements may add over 100 more so this is
closer to "just about everywhere" than "only some files" per the
guidance in sys/conf/options.
Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of
sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h
is created on all architectures.
Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the
set of compiled files.
Reviewed by: kib, cem, jhb, jtl
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14941
Invalid font data passed to PIO_VFONT can result in an integer overflow
in glyphsize. Characters may then be drawn on the console using glyph
map entries that point beyond the end of allocated glyph memory,
resulting in a kernel memory disclosure.
Submitted by: emaste
Reported by: Dr. Silvio Cesare of InfoSect
Security: CVE-2018-6917
Security: FreeBSD-SA-18:04.vt
Sponsored by: The FreeBSD Foundation
On x86 the IA-PC Boot Flags in the FADT can signal whether VGA is
available or not.
Sponsored by: Citrix systems R&D
Reviewed by: marcel
Differential revision: https://reviews.freebsd.org/D14397
accomplishes a few things:
- Makes NULL an invalid address in the kernel, which is useful for catching
bugs.
- Lays groundwork for radix-tree translation on POWER9, which requires the
direct map be at high memory.
- Similarly lays groundwork for a direct map on 64-bit Book-E.
The new base address is chosen as the base of the fourth radix quadrant
(the minimum kernel address in this translation mode) and because all
supported CPUs ignore at least the first two bits of addresses in real
mode, allowing direct-map addresses to be used in real-mode handlers.
This is required by Linux and is part of the architecture standard
starting in POWER ISA 3, so can be relied upon.
Reviewed by: jhibbits, Breno Leitao
Differential Revision: D14499
Trying to grab locks during cngrab() when entering the debugger is
deadlock prone as all other CPUs are already halted (and thus unable
to release locks) when cngrab() is invoked. One could instead use
try-locks. However, the case that the try-lock fails still has to
be handled. In addition, if the try-lock works it doesn't provide
any greater ordering guarantees than is already provided by entering
and exiting DDB. It is simpler to define a simpler path for the
case that the try-lock would fail and always use that when entering
DDB. Messing with timers, etc. when entering DDB is dubious even if
the try-lock succeeds.
This patch attempts to use the smallest possible set of operations to
grab the vt(4) console when entering DDB without using any locks.
Reviewed by: emaste
Tested by: Matthew Macy
MFC after: 1 week
During review iterations function signature has changed in definition
but not in actual call. Fix call to match the definition.
Reported by: Herbert J. Skuhra
Pointyhat to: gonzo
MFC after: 2 weeks
Introduce new set of loader tunables kern.vt.color.N.rgb, where N is a
number from 0 to 15. The value is either comma-separated list decimal
numbers ranging from 0 to 255 that represent values of red, green, and
blue components respectively (i.e. "128,128,128") or 6-digit hex triplet
commonly used to represent colors in HTML or xterm settings (i.e. #808080)
Each tunable overrides one of the 16 hardcoded palette codes and can be set
in loader.conf(5)
Reviewed by: bcr(docs), jilles, manu, ray
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D13645
Summary:
As in /dev/fb, allow the framebuffer driver to override the default memattr for
mmap(2). This is analogous to the change in 306555.
Reviewed By: ray
Differential Revision: https://reviews.freebsd.org/D13331
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
- Do not report T-axis wheel events as button presses
- Reverse T-axis to match Linux
- Remove wrong comment. T-axis buttons state should be checked by level not
by edge to allow continuous wheel tilt reporting
Reviewed by: gonzo
Approved by: gonzo (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12676
was aliased to a vt sequence, causing and fixing various bugs.
For syscons, this restores support for arg 2 which sets blinking block
too forcefully, and restores bugs for arg 0 and 1. Arg 2 is used for
vs in the cons25 entry in termcap, but I've never noticed an application
that uses this. The bugs involve replacing local settings by global
ones and need better handling of defaults to fix.
For vt, this requires moving the aliasing code from teken to vt where
it belongs. This sequences is very important for cons25 compatibility
in vt since it is used by the cons25 termcap entries for ve, vi and
vs. vt can't properly support vs for either cons25 or xterm since it
doesn't support blinking. For xterm, the termcap entry for vs asks
for something different using 12;25h instead of 25h.
Rename C25CURS for this to C25LCT and change its description to be closer
to echoing the old comment about it. CURS is too generic.
Fix missing syscons escape sequence for setting the global cursor shape
(and type). Only support this in syscons since vt can't emulate anything
in it.
during bootup. Debugging information shows that softclock_call_cc() is
trying to execute the vt_consdev.vd_timer callout, and the callout
structure contains a NULL c_func.
This appears to be due to a race between vt_upgrade() running
callout_reset() and vt_resume_flush_timer() calling callout_schedule().
Fix the race by ensuring that vd_timer_armed is always set before
attempting to (re)schedule the callout.
Discussed with: emaste
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D9828
for vt. Restore syscons' rendering of background (bg) brightness as
foreground (fg) blinking and vice versa, and add rendering of blinking
as background brightness to vt.
Bright/saturated is conflated with light/white in the implementation
and in this description.
Bright colors were broken in all cases, but appeared to work in the
only case shown by "vidcontrol show". A boldness hack was applied
only in 1 layering-violation place (for some syscons sequences) where
it made some cases seem to work but was undone by clearing bold using
ANSI sequences, and more seriously was not undone when setting
ANSI/xterm dark colors so left them bright. Move this hack to drivers.
The boldness hack is only for fg brightness. Restore/add a similar hack
for bg brightness rendered as fg blinking and vice versa. This works
even better for vt, since vt changes the default text mode to give the
more useful bg brightness instead of fg blinking.
The brightness bit in colors was unnecessarily removed by the boldness
hack. In other cases, it was lost later by teken_256to8(). Use
teken_256to16() to not lose it. teken_256to8() was intended to be
used for bg colors to allow finer or bg-specific control for the more
difficult reduction to 8; however, since 16 bg colors actually work
on VGA except in syscons text mode and the conversion isn't subtle
enough to significantly in that mode, teken_256to8() is not used now.
There are still bugs, especially in vidcontrol, if bright/blinking
background colors are set.
Restore XOR logic for bold/bright fg in syscons (don't change OR
logic for vt). Remove broken ifdef on FG_UNDERLINE and its wrong
or missing bit and restore the correct hard-coded bit. FG_UNDERLINE
is only for mono mode which is not really supported.
Restore XOR logic for blinking/bright bg in syscons (in vt, add
OR logic and render as bright bg). Remove related broken ifdef
on BG_BLINKING and its missing bit and restore the correct
hard-coded bit. The same bit means blinking or bright bg depending
on the mode, and we want to ignore the difference everywhere.
Simplify conversions of attributes in syscons. Don't pretend to
support bold fonts. Don't support unusual encodings of brightness.
It is as good as possible to map 16 VGA colors to 16 xterm-16
colors. E.g., VGA brown -> xterm-16 Olive will be converted back
to VGA brown, so we don't need to convert to xterm-256 Brown. Teken
cons25 compatibility code already does the same, and duplicates some
small tables. This is mostly for the sc -> te direction. The other
direction uses teken_256to16() which is too generic.
The {powerpc,powerpc64,sparc64} LINT kernel builds fail with this error:
sys/dev/vt/vt_buf.c:198: warning: 'vtbuf_htw' defined but not used
Move vtbuf_htw() inside the '#if SC_NO_CUTPASTE' block where it belongs, and
put it in the proper order.
This fixes the immedate issue w/ vt(4), but all three then fail on different
issues.
Reviewed by: emaste
For horizontal (T-axis) wheel reporting which is not supported by
sysmouse protocol kern.evdev.sysmouse_t_axis sysctl is introduced.
It can take following values:
0 - no T-axis events (default)
1 - T-axis events are originated in ums(4) driver.
2 - T-axis events are originated in psm(4) driver.
Submitted by: Vladimir Kondratiev <wulf@cicgroup.ru>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D8597
On the first switch we previously released the newly allocated keyboard
instead of the old one. Keyboard state was very confused afterwards for
further keyboard switches.
Submitted by: bde
Note that keyboards are stored in an array and are not freed (just
"unregistered" by clearing some fields) so a race would be limited to
obtaining stale information about an unregistered keyboard.
Reported by: CTurt
MFC after: 3 days
And rename "DEFAULT" constants to the more accurate "MAX."
PR: 210382
Submitted by: Felix <felixphew0 at gmail.com>
Reviewed by: wblock, cem
Tested by: Dave Cottlehuber <dch at skunkwerks.at>
rounddown2 tends to produce longer lines than the original code
and when the code has a high indentation level it was not really
advantageous to do the replacement.
This tries to strike a balance between readability using the macros
and flexibility of having the expressions, so not everything is
converted.
The graphic mode is noticeably slow on hypervisors, especially
on Hyper-V (1 second to each line).
Submitted by: Dexuan Cui <decui microsoft com>
Reviewed by: kib, sephe, royger (early loader version)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5739
will allow for code that uses the old fdt_get_range and fdt_regsize
functions to find a range, map it, access, then unmap to replace this, up
to and including the map, with a call to OF_decode_addr.
As this function should only be used in the early boot code the unmap is
mostly do document we no longer need the mapping as it's a no-op, at least
on arm.
Reviewed by: jhibbits
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D5258
size as defined by VT_FB_DEFAULT_WIDTH and VT_FB_DEFAULT_HEIGHT
(at this time 2048x1200). The default is really a max. We cap
the height and width to those defaults and position the screen
in the center of the frame buffer.
Ideally we use a bigger font to utility the entire real estate
that is the frame buffer, but that's seen as an improvement over
making it work first.
PR: 193745
horizonal resolution (width). In those cases fb_bpp ended up
completely wrong -- as in 6 bytes per pixel or something like
that. Since we already have a way to calculate fb_depth given
the masks and fb_bpp is effectively the same as fb_depth, all
we need to do is make sure fb_bpp is rounded to the next
multiple of the number of bits in a byte -- we assume we can
divide by the number of bits in a byte throughout vt(4).
While here:
- simplify how we calculate fb_depth.
- use fb_bpp instead of fb_depth to calculate fb_stride;
we know we can divide fb_bpp.
- don't limit fb_width and fb_height by VT_FB_DEFAULT_WIDTH
and VT_FB_DEFAULT_HEIGHT (resp.). Those constants have
not relation to the size of the frame buffer.
This at least fixes "lower-resolution" Macs. We're talking
1280x1024 or so. There still is a problem with 27" Macs,
which typically have a horizontal resolution over 2K.
PR: 193745 (partial)
Ok'd by: emaste@
We first map 64KB at 0xA0000 and then determine whether to work
in text or graphics mode. When graphics mode, the mapping is
precisely what we need and everything is fine. But text mode,
has the frame buffer relocated to 0xB8000. We didn't map that
much to safely add 0x18000 bytes to the base address.
Now we first check whether to work in text or graphics mode and
then map the frame buffer at the right address and with the
right size (0xA0000+64KB for graphics, 0xB8000+32KB for text).
PR: 202276
Tested by: ed@
frame buffers and memory mapped UARTs.
1. Delay calling cninit() until after pmap_bootstrap(). This makes
sure we have PMAP initialized enough to add translations. Keep
kdb_init() after cninit() so that we have console when we need
to break into the debugger on boot.
2. Unfortunately, the ATPIC code had be moved as well so as to
avoid a spurious trap #30. The reason for which is not known
at this time.
3. In pmap_mapdev_attr(), when we need to map a device prior to the
VM system being initialized, use virtual_avail as the KVA to map
the device at. In particular, avoid using the direct map on amd64
because we can't demote by virtue of not being able to allocate
yet. Keep track of the translation.
Re-use the translation after the VM has been initialized to not
waste KVA and to satisfy the assumption in uart(4) that the handle
returned for the low-level console is the same as later returned
when the device is probed and attached.
4. In pmap_unmapdev() remove the mapping from the table when called
pre-init. Otherwise keep the mapping. During bus probe and attach
device resources are mapped and unmapped multiple times, which
would have us destroy the mapping used by the low-level console.
5. In pmap_init(), set pmap_initialized to signal that we're not
pre-init anymore. On amd64, bring the direct map in sync with the
translations created at that time.
6. Implement bus_space_map() and bus_space_unmap() for real: when
the tag corresponds to memory space, call the corresponding
pmap_mapdev() and pmap_unmapdev() functions to construct and
actual handle.
7. In efifb.c and vt_vga.c, remove the crutches and hacks and simply
call pmap_mapdev_attr() or bus_space_map() as desired.
Notes:
1. uart(4) already used bus_space_map() during low-level console
setup but since serial ports have traditionally been I/O port
based, the lack of a proper implementation for said function
was not a problem. It has always supported memory mapped UARTs
for low-level consoles by setting hw.uart.console accordingly.
2. The use of the direct map on amd64 without setting caching
attributes has been a bigger problem than previously thought.
This change has the fortunate (and unexpected) side-effect of
fixing various EFI frame buffer problems (though not all).
PR: 191564, 194952
Special thanks to:
1. XipLink, Inc -- generously donated an Intel Bay Trail E3800
based eval board (ADLE3800PC).
2. The FreeBSD Foundation, in particular emaste@ -- for UEFI
support in general and testing.
3. Everyone who tested the proposed for PR 191564.
4. jhb@ and kib@ for being a soundboard and applying a clue bat
if so needed.
Apologies, this was how it was supposed to land. Mea culpa.
Differential Revision: https://reviews.freebsd.org/D3157
Reviewed by: gnn, hiren
Approved by: markj (mentor)
MFC after: 1 week
