Use the accessor function to get the softc for this sim. This also drops
an unneeded cast.
Sponsored by: Netflix
Reviewed by: mav@, hselasky@
Differential Revision: https://reviews.freebsd.org/D30360
The second set of USB transfer is requested by hkbd(4) and
should improve HID keyboard handling in kdb and panic contexts.
MFC after: 1 week
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D30486
Which happens when USB transfer setup is failed.
MFC after: 1 week
PR: 254974
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D30485
This fixes inability to start USB xfers in a case when FIFO has been
already open()-ed but no read() or poll() calls has been issued yet.
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D30343
This fixes lose of evdev events after moused has been killed.
While here use bitwise operations for UMS_EVDEV_OPENED flag.
Reviewed by: hselasky
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D30342
behind USB HUBs are detected and the USB reset counter logic will kick in
preventing enumeration of continuously failing ports.
Submitted by: phk@
Tested by: bz@
PR: 237666
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
says it should be max 10 milliseconds.
This may fix some USB enumeration issues:
> usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_IOERROR, ignored)
> usbd_setup_device_desc: getting device descriptor at addr 3 failed,
Found by: Zhichao1.Li@dell.com
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
0 milliseconds and 2 seconds inclusivly. Some style fixes while at it.
The USB specification has minimum values and maximum values,
and not only minimum values.
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
Since then, the FreeBSD USB stack has got proper USB RNDIS support.
PR: 254345
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
similarly to the Linux driver, by a tunable read only sysctl.
Submitted by: Oleg Sidorkin <osidorkin@gmail.com>
PR: 254884
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
- Make frontends call unified CTL core method ctl_datamove_done()
to report move completion. It allows to reduce code duplication
in differerent backends by accounting DMA time in common code.
- Add to ctl_datamove_done() and be_move_done() callback samethr
argument, reporting whether the callback is called in the same
context as ctl_datamove(). It allows for some cases like iSCSI
write with immediate data or camsim frontend write save one context
switch, since we know that the context is sleepable.
- Remove data_move_done() methods from struct ctl_backend_driver,
unused since forever.
MFC after: 1 month
Ignore fantom keyboard state reports entirelly rather than ignore
RollOver states for each key separatelly. Latter results in spurious
release/push pairs of events on each fantom keyboard state report.
Reported by: Jan Martin Mikkelsen <janm_AT_transactionware_DOT_com>
Submitted by: Jan Martin Mikkelsen (initial version)
PR: 253249
MFC after: 1 week
This adds a new sysctl to Wellspring Touchpad driver for controlling
Z-Axis (2-finger vertical scroll) direction "hw.usb.wsp.z_invert".
Submitted by: James Wright <james.wright_AT_digital-chaos_DOT_com>
Reviewed by: wulf
PR: 253321
Differential revision: https://reviews.freebsd.org/D28521
usbhid(4) is disabled by default to avoid conflicts with existing USB HID
drivers. To enable it place following lines to /boot/loader.conf:
hw.usb.usbhid.enable=1
usbhid_load="YES"
Suggested by: jhb
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D28124
When detaching the if_ure(4) driver, the TX active USB transfer array may
point to freed USB transfers. Given that the number of USB transfers is
very low, simply start all transfers every time there is a packet to
keep safe from use-after-free.
PR: 252608
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
which installs /dev/uhid# alias to hidraw character device for
compatibility with some existing uhid(4) users like Firefox.
As side effect it renames traditional uhid(4) driver to hidraw
to make possible using of common unit number allocator.
Requested by: Greg V <greg_unrelenting.technology>
Reviewed by: hselasky (as part of D27992)
This driver provides raw access to HID devices through uhid(4)-compatible
interface and is based on pre-8.x uhid(4) code. Unlike uhid(4) it does
not take devices in to monopoly ownership and allows parallel access
from other drivers.
hidraw supports Linux's hidraw-compatible interface as well.
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27992
This change implements hid_if.m methods for HID-over-USB protocol [1].
Also, this change adds USBHID_ENABLED kernel option which changes
device_probe() priority and adds/removes PnP records to prefer usbhid
over ums, ukbd, wmt and other USB HID device drivers and vice-versa.
The module is based on uhid(4) driver. It is disabled by default for
now due to conflicts with existing USB HID drivers.
[1] https://www.usb.org/sites/default/files/hid1_11.pdf
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27893
Also hide shim code added in a previous commit under COMPAT_USBHID12.
Note: it is enough to add -DCOMPAT_USBHID12 to CFLAGS to compile old
code with new HID subsystem, but it is not enough to link it at runtime.
HID dependency has to be added explicitly with MODULE_DEPEND macro.
Reviewed by: manu, hselasky (as part of D27887)
This does an import of quirk stubs, debugging macros from USB code and
numerous usage constants used by dependent drivers.
Besides, this change renames some functions to get a better matching
with userland library and NetBSD/OpenBSD HID code. Namely:
- Old hid_report_size() renamed to hid_report_size_max()
- New hid_report_size() calculates size of given report rather than
maximum size of all reports.
- hid_get_data_unsigned() renamed to hid_get_udata()
- hid_put_data_unsigned() renamed to hid_put_udata()
Compat shim functions are provided in usbhid.h to make possible compile
of legacy code unmodified after this change.
Reviewed by: manu, hselasky
Differential revision: https://reviews.freebsd.org/D27887
It will be used by the upcoming HID-over-i2C implementation. Should be
no-op, except hid.ko module dependency is to be added to affected drivers.
Reviewed by: hselasky, manu
Differential revision: https://reviews.freebsd.org/D27867
hid_locate() currently ignores all HID items which tagged as constant,
i.e. bit 0 of main item data is set to 1. See p.6.2.2.4 of
hid1_11.pdf [1]. Such an items are unconditionally treated as
byte-alignment padding. While that may be right decision for input and
output reports that is wrong for features reports. Feature reports can
contain constant capabilities e.g. 'Contact Count Maximum'.
See: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=232040
Remove check for constant from hid_locate() to make possible parsing of
such a reports.
[1] https://www.usb.org/sites/default/files/documents/hid1_11.pdf
Reviewed by: hselasky
Obtained from: sysutils/iichid
Differential Revision: https://reviews.freebsd.org/D27747
Code changes in this commit were obtained from straight from OpenBSD's
uplcom.c with almost no modification, the list of chip names and USB
IDs was obtained from Linux.
Differential Revision: https://reviews.freebsd.org/D27952
Submitted by: tomli_tomli.me (Yifeng Li)
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
The firmware header loaded into an rsu(4) device has to be customized
to reflect device settings. The driver was overwriting the header
from the shared firmware image before sending it to the device. If
two devices attached at the same time with different settings, one
device could potentially get a corrupted header. The recent changes
in a095390344 exposed this bug in the
form of a panic as the firmware blobs are now marked read-only in
object files and mapped read-only by the kernel.
To avoid the bug, change the driver to allocate a copy of the firmware
header on the stack that is initialized before writing it to the
device.
PR: 252163
Reported by: vidwer+fbsdbugs@gmail.com
Tested by: vidwer+fbsdbugs@gmail.com
Reviewed by: hselasky, bz, emaste
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27850
If LED state is set through evdev interface, than asynchronous nature
of USB transfer callback can lead to change of order of events echoed
back to userland as it causes LED events to be echoed with some lag.
Fix that with echoing of LED events synchronously in ioctl handler.
Reviewed by: hselasky
Obtained from: sysutils/iichid
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D27750
Unlike AT keyboards, HID devices are able to send all pc105 key
states within a single report. Let evdev to transmit all key state
changes within a single report too.
Reviewed by: hselasky
Obtained from: sysutils/iichid
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D27749
Add support for LAN found on Thinkpad USB-C and Thunderbolt Gen 2
docking stations.
Submitted by: ali.abdallah@suse.com
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
Hardware timestamp reporting is disabled by default as it produces many
extra events which are not handled by consumers like libinput.
Add hw.usb.wmt.timestamps=1 tunable to loader.conf to enable it.
Obtained from: sysutils/iichid
In Hybrid mode, the number of contacts that can be reported in one
report is less than the maximum number of contacts that the device
supports. For example, a device that supports a maximum of 4
concurrent physical contacts, can set up its top-level collection to
deliver a maximum of two contacts in one report. If four contact
points are present, the device can break these up into two serial
reports that deliver two contacts each.
Obtained from: sysutils/iichid
These Mini-Box LCDs are using Microchip components and sub-licensed product
IDs. Whilst here, update the constant names and descriptions for the products
to use the names listed on the manufacturer's website rather than vague ones.
The picoLCD 4x20 is named that on the manufacturer's website so prefer that
name, even though linux-usb.org lists it with the numbers reversed as one might
expect.
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D27670
- Use a uintptr_t cast to get the virtual address of a pointer in
USB_P2U() instead of a ptrdiff_t.
- Add offsets to a char * pointer directly without roundtripping the
pointer through a ptrdiff_t in USB_ADD_BYTES().
Reviewed by: imp, hselasky
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27581
Move initialization of num_altsetting under USB_CFG_INIT, else
there will be a page fault when enumerating USB devices.
PR: 251856
MFC after: 1 week
Submitted by: Ma, Horse <Shichun.Ma@dell.com>
Sponsored by: Mellanox Technologies // NVIDIA Networking
Allow setting the alternate interface number to fail when there is only
one alternate setting present, to comply with the USB specification.
Refactor how iface->num_altsetting is computed.
Bump the __FreeBSD_version due to change of core USB structure.
PR: 251856
MFC after: 1 week
Submitted by: Ma, Horse <Shichun.Ma@dell.com>
Sponsored by: Mellanox Technologies // NVIDIA Networking
Limit the number of alternate settings to 256.
Else the alternate index variable may wrap around.
PR: 251856
MFC after: 1 week
Submitted by: Ma, Horse <Shichun.Ma@dell.com>
Sponsored by: Mellanox Technologies // NVIDIA Networking
Some USB WLAN devices have "on-board" storage showing up as umass
and making the root mount wait for a very long time.
The WLAN drivers know how to deal with that an issue an eject
command later when attaching themselves.
Introduce a quirk to not probe these devices as umass and avoid
hangs and confusion altogether.
Reviewed by: hselasky, imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27434
Replace MAXPHYS by runtime variable maxphys. It is initialized from
MAXPHYS by default, but can be also adjusted with the tunable kern.maxphys.
Make b_pages[] array in struct buf flexible. Size b_pages[] for buffer
cache buffers exactly to atop(maxbcachebuf) (currently it is sized to
atop(MAXPHYS)), and b_pages[] for pbufs is sized to atop(maxphys) + 1.
The +1 for pbufs allow several pbuf consumers, among them vmapbuf(),
to use unaligned buffers still sized to maxphys, esp. when such
buffers come from userspace (*). Overall, we save significant amount
of otherwise wasted memory in b_pages[] for buffer cache buffers,
while bumping MAXPHYS to desired high value.
Eliminate all direct uses of the MAXPHYS constant in kernel and driver
sources, except a place which initialize maxphys. Some random (and
arguably weird) uses of MAXPHYS, e.g. in linuxolator, are converted
straight. Some drivers, which use MAXPHYS to size embeded structures,
get private MAXPHYS-like constant; their convertion is out of scope
for this work.
Changes to cam/, dev/ahci, dev/ata, dev/mpr, dev/mpt, dev/mvs,
dev/siis, where either submitted by, or based on changes by mav.
Suggested by: mav (*)
Reviewed by: imp, mav, imp, mckusick, scottl (intermediate versions)
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D27225
Improve the output of the recently often experienced debug message in order
to gather further data.
PR: 237666
Reviewed by: hselasky
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D27108
Foundation copyrights, approved by emaste@. It does not include
files which carry other people's copyrights; if you're one
of those people, feel free to make similar change.
Reviewed by: emaste, imp, gbe (manpages)
Differential Revision: https://reviews.freebsd.org/D26980
PCIe allows for MSI-X BAR to be either dedicated, or MSI-X Table may
be co-located in some functional BAR. In the later case xhci(4) is
unable to allocate active resource for the table because BAR is
already activated.
Handle it by checking for this special case, and not try to alloc
resource if MSI-X BAR is IO.
Reported and tested by: emaste
Reviewed by: emaste, hselasky
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D26913
vendor ID string to say just "Microchip Technology" -- the buyout of
Standard Microsystems happened in 2012 and the SMC/SMSC names are pretty
much retired at this point.
PR: 241406
This update adds support for:
HW VLAN tagging
HW checksum offload for IPv4 and IPv6
tx and rx aggreegation (for full gige speeds)
multiple transactions
In my testing, I am able to get 900-950Mbps depending upon
TCP or UDP, which is a significant improvement over the previous
91Mbps (~8kint/sec*1500bytes/packet*1packet/int).
Reviewed by: hselasky
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D25809
In r178354 with the introduction of multi-bss ("vap") support factoring
out started and with r193340 ieee80211_media_change() no longer returned
ENETRESET but only 0 or error.
As ieee80211(9) tells the ieee80211_media_change() function should not
be called directly but is registered with ieee80211_vap_attach() instead.
Some drivers have not been fully converted. After fixing the return
checking some of these functions were simply wrappers between
ieee80211_vap_attach() and ieee80211_media_change(), so remove the extra
function, where possible as well.
PR: 248955
Submitted by: Tong Zhang (ztong0001 gmail.com) (original)
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
At least on Orange Pi PC Plus even the host mode does not work without
enabling the phy and setting it to the host mode.
The driver will now parse dr_mode property and will try to configure
itself and the phy accordingly.
OTG mode is not supported yet, so it is treated as the device / peripheral
mode.
The phy is enabled -- powered on -- only for the host mode.
The device mode requires support from a phy driver, e.g., aw_usbphy on
Allwinner platform.
aw_usbphy does not support the device mode, so it cannnot work yet.
MFC after: 6 weeks
Otherwise, I get this panic:
panic: awusbdrd_reg: Invalid register 0x342
It looks that musb code both writes and reads at least MUSB2_REG_TXDBDIS.
MFC after: 5 weeks
X-MFC after: r365399
Investigating a hang I found having some more error information
available would be helpful, so be more verbose and also tell cam/xpt
status in case of error/panic.
Reviewed by: hselasky
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D26287
While debugging a hang I noticed that in case of error in
umass_cam_attach_sim() we miss a cam_sim_free() call.
Added that to not leak resources.
Reviewed by: hselasky
MFC after: 3 days
Differential Revision: D26287
The "Intel Sunrise Point-LP USB 3.0 controller" doesn't update the wMaxPacket
field in the control endpoint context automatically causing a BABBLE error code
on the initial first USB device descriptor read, when the bMaxPacketSize is not
8 bytes.
Reported by: wulf@
PR: 248784
MFC after: 1 week
Sponsored by: Mellanox Technologies
For ieee80211_add_channel+*() we are passing in an int flag for
ht40 and in some cases another int flag for vht80 where we'd only
need two bits really.
Convert these variables to a bitflag and fold them together into one.
This also allows for VHT160 and VHT80P80 and whatever may come to
be considered. Define the various options currently needed.
Change the drivers (rtwn and rsu) which actually set this bit to non-0.
For convenience the "1" currently used for HT40 is preserved.
Enahnce getflags_5ghz() to handle the full set of VHT flags based
on the input flags from the the driver.
Update the regdomain implementation as well to make use of the new
flags and deal with higher [V]HT bandwidths.
ieee80211_add_channel() specifically did not take flags so it will
not support naything beyond 20Mhz channels.
Note: I am not entirely happy with the "cbw_flag[s]" name, but we
do use chan_flags elsewhere already.
MFC after: 2 weeks
Reviewed by: adrian, gnn
Sponsored by: Rubicon Communications, LLC (d/b/a "Netgate")
Differential revision: https://reviews.freebsd.org/D26091
The AMD's Ryzen 3 3200g XHCI controllers apparently need the evaluate
control endpoint context command, but we don't need to issue this
command when the bMaxPacketSize is received after the read of the USB
device descriptor, because this part should be handled automatically.
PR: 248784
Tested by: emaste, hselasky
MFC after: 1 week
Sponsored by: Mellanox Technologies
It was a driver for a USB FM tuner that was available in the market in 2002. I
wrote the driver in 2003. I've not used it since 2005 or so, so it's time to
retire this driver. No userland code ever interfaced to the special device it
created. There's no user base: the last bug I received on this driver was in
2004.
Relnotes: Yes
The XHCI specification says that the XHCI controller should detect
reception of the USB device descriptors, and automatically update
the max packet size in the control endpoint context.
Differential Revision: https://reviews.freebsd.org/D26104
Reviewed by: kp@
MFC after: 1 week
Sponsored by: Mellanox Technologies
- hoist all request / response structures from function level to top level
- replace magic numeric literals with constants
- regroup types, data and functions
- remove setting of the id field in responses as they are completely
overwritten with data from the device
- centralize setting of the id field as it is always set to the value of
request type
- fix setting and querying of open-drain vs push-pull configuration of
an output pin -- it's always in one of those configurations
- detect special pin configurations: a pin in a special configuration is
neither general purpose input or output
- there is still no support for setting special configurations
MFC after: 2 weeks
The newer hardware revisions of the Raspberry Pi 4 removed the ability of
the VIA VL805 xhci controller to load its own firmware. Instead the
firmware must be installed at the appropriate time by the VideoCore
coprocessor.
Submitted by: Robert Crowston <crowston_protonmail.com>
Differential Revision: https://reviews.freebsd.org/D25261
Handle the fact that parts of usb(4) can be compiled into the boot
loader, where M_WAITOK does not guarantee a successful allocation.
PR: 240545
Submitted by: Andrew Reiter <arr@watson.org> (original version)
Reviewed by: hselasky
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25706
Create an acpi attachment for the DWC USB OTG device. This is present in
the Raspberry Pi 4 in the USB-C port normally used to power the board. Some
firmware presents the kernel with ACPI tables rather than FDT so we need
an ACPI attachment.
Submitted by: Greg V <greg_unrelenting.technology>
Approved by: hselasky (removal of All rights reserved)
Differential Revision: https://reviews.freebsd.org/D25203
description of items residing in a so-called union. FreeBSD currently
only supports 4 such pop levels.
If the push level is not restored within the processing of the same
HID item, an invalid memory location may be used for subsequent HID
item processing.
Verify that the push level is always valid when processing HID items.
Reported by: Andy Nguyen (Google)
MFC after: 3 days
Sponsored by: Mellanox Technologies
This specifically fixes that TX frames are large enough now to hold a 3900 odd
byte AMSDU (the little ones); me flipping it on earlier messed up transmit!
Tested:
* if_run, STA mode, TX/RX TCP/UDP iperf. TCP is now back to normal and
correctly does ~ 3200 byte AMSDU/fast frames (2x1600ish byte MSDUs).
* Set the tx/rx chains based on the existing MIMO eeprom reads
* Add 3-chain rates
Tested:
* MAC/BBP RT5390 (rev 0x0502), RF RT5370 (MIMO 1T1R), 2g/5g STA
* MAC/BBP RT3593 (rev 0x0402), RF RT3053 (MIMO 3T3R), 2g/5g STA
Now that I'm a proud owner of an ASUS USB-N66, I can test 2G/5G and
3-stream configurations.
For now, just flip on 5G HT rates. I've tested this in both
5G HT20 and 5G 11a modes. It's still one stream for now until
we verify that the number of streams reported (ie the MIMO below)
is actually the number of 11n streams, NOT the number of antennas.
(They don't have to match! You can have more antennas than MIMO
streams!)
Tested:
* run0: MAC/BBP RT3593 (rev 0x0402), RF RT3053 (MIMO 3T3R)
* Enable self-generated 11n frames
* add MCS rates for 1-stream and 2-stream rates; will do 3-stream
once the rest of this tests out OK with other people.
* Hard-code 1 stream for now
* Add A-MPDU RX mbuf tagging
* RTS/CTS if doing RTSCTS in HT protmode as well as legacy; they're
separate configuration flags
* Update the amrr rate index stuff - walk the rates array like others
to find the right one - this now works for MCS and CCK/OFDM rates
* Add support for atheros fast frames/AMSDU support as we can generate
those in net80211.
TODO:
* HT40 isn't enabled yet
* No A-MPDU support just yet; that requires some more firmware research
and maybe porting some ath(4) A-MPDU support/tracking into net80211
* Short preamble flags aren't set yet for MCS; need to check the linux
driver and see what's going on there
* Add 3x3 rates and set tx/rx stream configuration appropriately
* More 5GHz testing; I have a 3x3 dual band USB NIC coming soon that'll
let me test this.
* Figure out why the RX path isn't performing as fast as it could -
there's only a single buffer loaded at a time for the receive path
in the USB bulk handler and this may not be super useful.
Tested:
* RT5390 usb, 1x1, RF5370 (2GHz radio), STA mode - A-MSDU TX, A-MPDU RX
Submitted by: Ashish Gupta <ashishgu@andrew.cmu.edu>
Differential Revision: https://reviews.freebsd.org/D22840
don't implement link power management, LPM.
This fixes error code XHCI_TRB_ERROR_BANDWIDTH for isochronous USB 3.0
transactions.
Submitted by: Horse Ma <Shichun.Ma@dell.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
Name each ehci driver uniquely.
This remove the warning printed at each arm boot :
module_register: cannot register simplebus/ehci from kernel; already loaded from kernel
A similar fix was done in r333074 but imx_ehci wasn't renamed and generic_ehci wasn't
present at that time.
This driver hasn't been relevant in almost 15 years. It was for a product on the
shelves for about 6 months in 2003/2004. I've not updated the driver since then,
and have had nobody talk to me about it since maybe 2006 or 2007. It doesn't
implement a standard interface, and can be better done with libusb. All the
action has moved to webcamd for newer, more fully featured hardware. It makes no
appearances in the nycbug dmesg archive.
Relnotes: yes
MFC After: 3 days
key is pressed at the same time as a regular key, that means key with
modifier is output. Some automated USB keyboards like Yubikeys need this.
This fixes a regression issue after r357861.
Reported by: Adam McDougall <mcdouga9@egr.msu.edu>
PR: 224592
PR: 233884
MFC after: 3 days
Sponsored by: Mellanox Technologies
Skip device mode switch step on Fountain-based devices as they don't
support RAW_SENSOR_MODE command, so failing to attach.
This was reproduced on PowerBook G4 (model PowerBook5,6) equipped with
product ID 0x020e
Reviewed by: hselasky
Approved by: jhibbits (mentor)
Differential Revision: https://reviews.freebsd.org/D24005
maximal input report size instead of wMaxPacketSize.
If the USB frame length is set to 1024 bytes, WMT_BSIZE, the EETI controller
will pack multiple touch events in the packet and the current code will only
process the first touch event.
As a result some important events are lost like releasing the finger from the
touchscreen.
Use the maximal input report size as buffer size instead.
PR: 244718
Tested by: Oskar Holmlund <oskar.holmlund@ohdata.se>, wulf
MFC after: 3 days
Discussed with: hselasky
Limiting frame size to maximum packet size breaks devices which have input
report size larger than wMaxPacketSize. Maximal input report size should be
used instead.
Revert the commit as it have not been MFC-ed yet.
Discussed with: hselasky
will pack multiple touch events in the packet and the current code will only
process the first touch event.
As a result some important events are lost like releasing the finger from the
touchscreen.
Use the maximum maximum packet size as buffer size instead.
Submitted by: Oskar Holmlund <oskar.holmlund@ohdata.se>
PR: 244718
MFC after: 3 days
Sponsored by: Mellanox Technologies
Touch Digitizer V04 report descriptor declares 'Contact Count Maximum' usage
as constant. That was not supported by descriptor parser.
PR: 232040
Reported by: Sergei Akhmatdinov <sakhmatd@darkn.space>
MFC after: 1 week
because it clobbers the super speed link status when a device is in super
speed mode. Currently the power bit is not needed for anything in the USB
hub driver.
This fixes USB warm reset for super speed devices.
Tested by: Shichun.Ma@dell.com
MFC after: 3 days
Sponsored by: Mellanox Technologies
This fixes a regression issue after r357861.
Reported by: James Wright <james.wright@jigsawdezign.com>
PR: 224592
PR: 233884
MFC after: 3 days
Sponsored by: Mellanox Technologies
key-codes from the USB keyboard. Negative key-codes are currently skipped.
While at it use the bit size value provided by the HID location structure
instead of assuming a value of 8.
This fixes a regression issue after r357861.
Reported by: Minoru TANABE <kotanabe3@gmail.com>
PR: 224592
PR: 233884
MFC after: 3 days
Sponsored by: Mellanox Technologies
if_capabilities indicates capabilities supported by the hardware;
if_capenable which are enabled. Note that rx checksum is still disabled
in the driver at compile time.
Submitted by: Johannes <iz-rpi04@hs-karlsruhe.de>
MFC after: 2 weeks
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked). Use it in
preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Reviewed by: hselasky, kib
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D23632
Add support for decoding pressed keys as a bitmap. The keys in the
bitmap are described in the interface specific HID descriptor. Some
keyboards even have multiple input interfaces, only using the bitmap
method when the event array is full. That typically means when more
than seven keys are pressed simultaneously.
The internals of the USB keyboard driver have been slightly reworked
to keep track of all keys in a single bitmap having 256 bits. This
bitmap is then divided into blocks of 64-bits as an optimisation.
Simplify automatic key repeat logic, because only the last key pressed
can be repeated.
PR: 224592
PR: 233884
Tested by: Alex V. Petrov <alexvpetrov@gmail.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
This avoids getting the XHCI_TRB_ERROR_CONTEXT_STATE error code from the XHCI
controller when the endpoint is disabled or already stopped.
Suggested by: Shichun.Ma@dell.com
MFC after: 1 week
Sponsored by: Mellanox Technologies
The newer versions of RPi FDT flipped the order of the interrupts
specification and added an 'interrupt-names' property for driver aide in
finding the correct interrupt, rather than assuming the positions. Use it if
it's available, or fallback to the old method if there is no interrupt-names
property with a usb value.
This has been tested with both old RPi3B FDT and new RPi3B FDT, USB again
works on the latter.
Reported by: Tom Yan <tom.ty89 gmail com>
MFC after: 3 days
Do not configure any endpoint twice, but instead keep track of which
endpoints are configured on a per device basis, and use an evaluate
endpoint context command instead. When changing the configuration make
sure all endpoints get deconfigured and the configured endpoint mask
is reset.
This fixes an issue where an endpoint might stop working if there is
an error and the endpoint needs to be reconfigured as a part of the
error recovery mechanism in the FreeBSD USB stack.
Tested by: Shichun.Ma@dell.com
MFC after: 1 week
Sponsored by: Mellanox Technologies
r356087 made it rather innocuous to double-register built-in keyboard
drivers; we now set a flag to indicate that it's been registered and only
act once on a registration anyways. There is no misleading here, as the
follow-up kbd_delete_driver will actually remove the driver as needed now
that the linker set isn't also consulted after kbdinit.
Keyboard drivers are generally registered via linker set. In these cases,
they're also available as kmods which use KPI for registering/unregistering
keyboard drivers outside of the linker set.
For built-in modules, we still fire off MOD_LOAD and maybe even MOD_UNLOAD
if an error occurs, leading to registration via linker set and at MOD_LOAD
time.
This is a minor optimization at best, but it keeps the internal kbd driver
tidy as a future change will merge the linker set driver list into its
internal keyboard_drivers list via SYSINIT and simplify driver lookup by
removing the need to consult the linker set.
Most keyboard drivers are using the genkbd implementations as it is;
formally use them for any that aren't set and make
genkbd_get_fkeystr/genkbd_diag private.
These invocations were directly calling enkbd_diag(), rather than
indirection back through kbdd_diag/kbdsw. While they're functionally
equivent, invoking kbdd_diag where feasible (i.e. not in a diag
implementation) makes it easier to visually identify locking needs in these
other drivers.
The datasheets for these chips claim the maximum is 921,600, but testing
shows these two higher rates also work (but no rates above 921,600 other
than these two work; these represent dividing the base buad clock by 3 and 2
respectively).
o Remove All Rights Reserved from my notices
o imp@FreeBSD.org everywhere
o regularize punctiation, eliminate date ranges
o Make sure that it's clear that I don't claim All Rights reserved by listing
All Rights Reserved on same line as other copyright holders (but not
me). Other such holders are also listed last where it's clear.
Some places in network code may need to verify that an ethernet address
is not the 'zero' address. Provide a standard macro ETHER_IS_ZERO for
this purpose, similar to the ETHER_IS_BROADCAST macro already available.
This patch also removes previous ETHER_IS_ZERO definitions in several
USB ethernet drivers, in favor of this centrally-located macro.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: erj@
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21240
When epoch(9) was introduced to network stack, it was basically
dropped in place of existing locking, which was mutexes and
rwlocks. For the sake of performance mutex covered areas were
as small as possible, so became epoch covered areas.
However, epoch doesn't introduce any contention, it just delays
memory reclaim. So, there is no point to minimise epoch covered
areas in sense of performance. Meanwhile entering/exiting epoch
also has non-zero CPU usage, so doing this less often is a win.
Not the least is also code maintainability. In the new paradigm
we can assume that at any stage of processing a packet, we are
inside network epoch. This makes coding both input and output
path way easier.
On output path we already enter epoch quite early - in the
ip_output(), in the ip6_output().
This patch does the same for the input path. All ISR processing,
network related callouts, other ways of packet injection to the
network stack shall be performed in net_epoch. Any leaf function
that walks network configuration now asserts epoch.
Tricky part is configuration code paths - ioctls, sysctls. They
also call into leaf functions, so some need to be changed.
This patch would introduce more epoch recursions (see EPOCH_TRACE)
than we had before. They will be cleaned up separately, as several
of them aren't trivial. Note, that unlike a lock recursion the
epoch recursion is safe and just wastes a bit of resources.
Reviewed by: gallatin, hselasky, cy, adrian, kristof
Differential Revision: https://reviews.freebsd.org/D19111
Create an attachment file for the existing ACPI attachment, and create a
new FDT attachment for the generic-ehci driver.
Submitted by: andrew (Original version)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D19389
above 1Kbyte. It might look like some XHCI(4) controllers do not
support when the USB control transfer is split using a link TRB. The
next NORMAL TRB after the link TRB is simply failing with XHCI error
code 4. The quirk ensures we allocate a 64Kbyte buffer so that the
data stage TRB is not broken with a link TRB.
Found at: EuroBSDcon 2019
MFC after: 1 week
Sponsored by: Mellanox Technologies
libusb. This is useful for speeding up large data transfers while reducing
the interrupt rate.
Found at: EuroBSDcon 2019
MFC after: 1 week
Sponsored by: Mellanox Technologies
this to 2k to prevent them from being truncated and ignored. It
appears to be a sanity check only, but bumping it to 2k allows both of
my iic hid devices to be parsed and the second one to work...
After r351243 when ALTQ was enabled in the kernel, the inline functions
in ifq.h would not have full type information as if_var.h was not
included.
Given usb_ethernet.h already includes all the various headers (which)
is the cause of the problem here, add if_var.h to it. This fixes the
builds again.
Reported by: CI system, e.g. FreeBSD-head-aarch64-LINT
order to have struct mii_data available. However, it only really needs
a forward declaration of struct mii_data for use in pointer form for
the return type of a function prototype.
Custom kernel configuration that have usb and fdt enabled, but no miibus,
end up with compilation failures because miibus_if.h will not get
generated.
Due to the above, the following changes have been made to usb_ethernet.h:
* remove the inclusion of mii headers
* forward-declare struct mii_data
* include net/ifq.h to satify the need for complete struct ifqueue
Reviewed by: ian
Obtained from: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D21293
with Communication Device Class Ethernet Emulation Model (CDC EEM).
The driver supports both the device, and host side operation; there
is a new USB template (#11) for the former.
This enables communication with virtual USB NIC provided by iLO 5,
as found in new HPE Proliant servers.
Reviewed by: hselasky
MFC after: 2 weeks
Relnotes: yes
Sponsored by: Hewlett Packard Enterprise
Enable this for the NovAtel OEMv2 GPS receiver.
Not fixed: The receiver shows up as "<Interface 0>" in the device
tree, because that is literally what the descriptor-string is.
Reviewed by: hselasky@
While at it fix an invalid memory access issue when attaching external
USB HUBs, which are not mapped by ACPI, due to missing status check
when calling AcpiGetObjectInfo() from acpi_usb_hub_port_probe_cb().
Sponsored by: Mellanox Technologies
This adds ACPI device path on devinfo(8) output and
show value of _UPC(usb port capabilities), _PLD (physical location of device)
when hw.usb.debug >= 1 .
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D20630
rename the source to gsb_crc32.c.
This is a prerequisite of unifying kernel zlib instances.
PR: 229763
Submitted by: Yoshihiro Ota <ota at j.email.ne.jp>
Differential Revision: https://reviews.freebsd.org/D20193
asserted. Some development boards for example will reset on DTR,
and some radio interfaces will transmit on RTS.
This patch allows "stty -f /dev/ttyu9.init -rtsdtr" to prevent
RTS and DTR from being asserted on open(), allowing these devices
to be used without problems.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D20031
if a USB transfer is cancelled that we need to fake a completion event.
Implement missing support in ugen_fs_copy_out() to handle this.
This fixes issues with webcamd(8) and firefox.
MFC after: 3 days
Sponsored by: Mellanox Technologies
This is a curious small widget for which I might write a driver.
It is bridge between USB HID interface and I2C interface plus some
GPIO pins.
MFC after: 2 weeks
all-ones then carving out blocks of zeroes where specified values go, init
it to all-zeroes, put in ones where values need to be masked, then use it
as value &= ~sc_led_modes_mask. In addition to being more idiomatic, this
means everything related to FDT data is initialized to zero along with the
rest of the softc, and that allows removing some #ifdef FDT sections and
wrapping the whole muge_set_leds() function in a single ifdef block.
This also deletes the early-out from muge_set_leds() when an eeprom exists.
Even if there is an eeprom with led config in it, the fdt data (if present)
should override that, because the user is in control of the fdt data.
OTP registers (because the user is in control of the fdt data). Remove the
early returns from the code that tries to find a good mac address, so that
the execution always flows through the routine to get an address from FDT
data last, when on FDT-enabled systems.
the device instance, and to get the MAC address for the device instance.
The ad-hoc code this replaces could find the wrong instance if multiple
devices were present.
Also use LED mode settings from the FDT to set the PHY.
From v3 of the patch submitted in the PR.
I moved the sc_led_modes and sc_led_modes_mask default setting outside
of the #ifdef FDT case.
PR: 237325
Submitted by: Ralf <iz-rpi03@hs-karlsruhe.de>
Reviewed by: ian
MFC after: 2 weeks
MFC with: r348001
Event: Waterloo Hackathon 2019
Differential Revision: https://reviews.freebsd.org/D20325
Also apply some style(9) and remove the message about EEPROM configuration
(if there's an EEPROM the hardware handles LED configuration itself).
PR: 237325
Reviewed by: ian
MFC after: 2 weeks
Submitted by: Ralf <iz-rpi03@hs-karlsruhe.de>
This allows replacing "sys/eventfilter.h" includes with "sys/_eventfilter.h"
in other header files (e.g., sys/{bus,conf,cpu}.h) and reduces header
pollution substantially.
EVENTHANDLER_DECLARE and EVENTHANDLER_LIST_DECLAREs were moved out of .c
files into appropriate headers (e.g., sys/proc.h, powernv/opal.h).
As a side effect of reduced header pollution, many .c files and headers no
longer contain needed definitions. The remainder of the patch addresses
adding appropriate includes to fix those files.
LOCK_DEBUG and LOCK_FILE_LINE_ARG are moved to sys/_lock.h, as required by
sys/mutex.h since r326106 (but silently protected by header pollution prior
to this change).
No functional change (intended). Of course, any out of tree modules that
relied on header pollution for sys/eventhandler.h, sys/lock.h, or
sys/mutex.h inclusion need to be fixed. __FreeBSD_version has been bumped.
FDT data is sometimes used to configure usb devices which are hardwired into
an embedded system. Because the devices are instantiated by the usb
enumeration process rather than by ofwbus iterating through the fdt data, it
is somewhat difficult for a usb driver to locate fdt data that belongs to
it. In the past, various ad-hoc methods have been used, which can lead to
errors such applying configuration that should apply only to a hardwired
device onto a similar device attached by the user at runtime. For example,
if the user adds an ethernet device that uses the same driver as the builtin
ethernet, both devices might end up with the same MAC address.
These changes add a new usb_fdt_get_node() helper function that a driver can
use to locate FDT data that belongs to a single unique instance of the
device. This function locates the proper FDT data using the mechanism
detailed in the standard "usb-device.txt" binding document [1].
There is also a new usb_fdt_get_mac_addr() function, used to retrieve the
mac address for a given device instance from the fdt data. It uses
usb_fdt_get_node() to locate the right node in the FDT data, and attempts to
obtain the mac-address or local-mac-address property (in that order, the
same as linux does it).
The existing if_smsc driver is modified to use the new functions, both as an
example and for testing the new functions. Rpi and rpi2 boards use this
driver and provide the mac address via the fdt data.
[1] https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bindings/usb/usb-device.txt
Differential Revision: https://reviews.freebsd.org/D20262
Ampere eMAG systems have XHCI just described in ACPI, not on PCI.
Submitted by: Greg V <greg@unrelenting.technology>
Reviewed by: andrew
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D19986
RTL8152 (chip version URE_CHIP_VER_4C10) doesn't
have hardwired MAC address, in other words, it is all zeros.
This commit fixes it by setting random MAC address
when MAC address is all zeros.
Reviewed by: kevlo
Differential Revision: https://reviews.freebsd.org/D19856
Both linux and u-boot sources for RTL8152 driver has this value.
RTL8152 USB ethernet is used in NanoPI R1 board as second ethernet.
This fixes for me RTL8152 USB ethernet not detected problem after
reboot on NanoPI R1 board.
Both NetBSD and OpenBSD have a wrong value so far.
frame header and data.
This will fix 'Mysterious OLPC stuff' for received frames and wrong
CCMP / TKIP / data decoding for transmitted frames in net/wireshark
dissector.
While here, drop unneeded comment - net80211 handles padding requirements
for Tx & Rx without driver adjustment.
Tested with D-Link DWA-140 rev B3, STA mode.
MFC after: 1 week
Also, pass control frames to the host while in MONITOR mode and / or
when promiscuous mode is enabled.
Tested with Netgear WG111 v3 (RTL8187B), STA / MONITOR modes.
MFC after: 2 weeks
- Alignment issues:
* Add missing __packed attributes + padding across all drivers; in
most places there was an assumption that padding will be always
minimally suitable; in few places - e.g., in urtw(4) / rtwn(4) -
padding was just missing.
* Add __aligned(8) attribute for all Rx radiotap headers since they can
contain 64-bit TSF timestamp; it cannot appear in Tx radiotap headers, so
just drop the attribute here. Refresh ieee80211_radiotap(9) man page
accordingly.
- Since net80211 automatically updates channel frequency / flags in
ieee80211_radiotap_chan_change() drop duplicate setup for these fields
in drivers.
Tested with Netgear WG111 v3 (urtw(4)), STA mode.
MFC after: 2 weeks
Marvell XHCI is in fact generic-xhci, so move the driver and
add the compatible string.
While here, get and enable the phy if the dtb provide one.
The xhci bindings state that phys should be in a 'phys' property but
Marvell DTS uses 'usb-phy', only add support for 'usb-phy' for now.
Sponsored-by: Rubicon Communications, LCC ("Netgate")
This is a "fake" phy that handle regulator, clocks and reset gpio.
Only clock and regulator is supported for now.
Sponsored-by: Rubicon Communications, LCC ("Netgate")
