All UFS options work for ufs.ko.
Reviewed by: emaste, imp
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D39990
This is the MINIMAL config with SMP/NUMA options turned off.
Useful to ensure that UP configuration still builds, until it is removed
finally.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
On amd64 ACPI is required to boot, it cannot work as a module, and we do
not build the ACPI module for long time.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The driver is enormous and rarely used.
text data bss dec hex filename
23076646 1870505 4415872 29363023 0x1c00b4f kernel.before
20017433 1870305 4416000 26303738 0x1915cfa kernel.after
People using the driver will need to add pmspcv_load="YES" to
their loader.conf.
Reviewed by: jhb
Relnotes: yes
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D39816
The present implementation is only for x86. Other architectures need
adjustments for querying presence of EFI.
Xen's EFI support is also quite troublesome on non-x86. This is being
slowly remedied, but until in better shape the EFI clock functionality
should be disabled.
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D31065
Add MODULE_PNP_INFO() to the driver to make it autoload if not linked
statically into the kernel. Remove the device from amd64/i386 GENERIC.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D35074
NETLINK is going to replace rtsock and a number of other ioctl/sysctl interfaces.
In-base utilies such as route(8), netstat(8) and soon ifconfig(8)
are being converted to use netlink sockets as a transport between
kernel and userland.
In the current configuration, it still possible have the kernel
without NETLINK (`nooptions NETLINK`) and use the aforementioned
utilies by buidling the world with `WITHOUT_NETLINK` src.conf knob.
However, this approach does not cover the cases when person unintentionally
builds a custom kernel without netlink and tries to use the standard userland.
This change adds `option NETLINK` to the default options for each
architecture, fixing the custom kernel issue.
For arm, this change uses `std.armv6` and `std.armv7` (netlink already in)
instead of DEFAULTS.
Reviewed By: imp
Differential Revision: https://reviews.freebsd.org/D39339
Most options in kernel config files use "options<space><tab>OPTION".
This allows the option to be commented out without shifting columns.
A few options had two tabs, and some had spaces. Make them consistent.
They don't provide any value and are quite arbitrary.
Note arm64 GENERIC-MMCCAM was already excluded, just not the NODEBUG
variant.
The option is already build-tested with arm64 LINT kernel.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D38458
Netlink is a communication protocol defined in RFC 3549. It is async,
TLV-based protocol, providing 1-1 and 1-many communications between kernel
and userland. Netlink is currently used in Linux kernel to modify, read and
subscribe for nearly all networking states. Interface state, addresses, routes,
firewall, rules, fibs, etc, are controlled via Netlink.
Netlink support was added in D36002. It has got a number of improvements and
first customers since then:
* net/bird2 got netlink support, enabling route multipath in FreeBSD
* netlink-based devd notifications are being worked on ( D37574 ).
* linux(4) fully supports and depends on Netlink
Enabling Netlink in GENERIC targets two goals.
The first one is to provide stability for the third-party userland applications,
so they can rely on the fact that netlink always exists since 14.0 and potentially 13.2.
Loadable module makes life of the app delepers harder. For example, `net/bird2` can be
either build with netlink or rtsock support, but not both.
The second goal is to enable gradual conversion of the base userland tools
to use netlink(4) interfaces. Converting tools like netstat (D36529), route,
ifconfig one-by-one simplifies testing and addressing the feedback.
Othewise, switching all base to use netlink at once may be too big of a leap.
This change targets amd64, the other architectures will follow soon.
Differential Revision: https://reviews.freebsd.org/D37783
Remove the KPI/KBI changes from ieee80211_node.h and always use the
macros to pass in __func__ and __LINE__ to the functions.
The actual implementations are prefixed by "_" rather than suffixed
by "_debug" as they no longer are "debug"-specific.
Some of the select functions were not actually using the passed in
func, line options; however they are calling other functions which
use them. Directly call the internal implementation in those cases
passing the arguments on.
Use a file-local __debrefcnt_used define to mark the arguments __unused
in cases when we compile without IEEE80211_DEBUG_REFCNT and hope the
toolchain is intelligent enough to not pass them at all in those cases.
Also _ieee80211_free_node() now has a conflict so make the previous
_ieee80211_free_node() the new __ieee80211_free_node().
Add IEEE80211_DEBUG_REFCNT to the NOTES file on amd64 to keep exercising
the option.
Sponsored by: The FreeBSD Foundation
X-MFC: never
Discussed on: freebsd-wireless
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D37529
This kernel configuration supports the Firecracker VMM environment.
Relnotes: FreeBSD can now run inside the Firecracker VMM
via the amd64 FIRECRACKER kernel configuration.
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D36672
This changes the default TCP Congestion Control (CC) to CUBIC.
For small, transactional exchanges (e.g. web objects <15kB), this
will not have a material effect. However, for long duration data
transfers, CUBIC allocates a slightly higher fraction of the
available bandwidth, when competing against NewReno CC.
Reviewed By: tuexen, mav, #transport, guest-ccui, emaste
Relnotes: Yes
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D36537
It does not work with ULE, which is the default scheduler for over a
decade.
Reviewed by: emaste, kib
Differential Revision: https://reviews.freebsd.org/D36094
A replacement QAT driver will be imported, but this replacement does not
support Atom C2xxx hardware. So, the existing driver will be kept
around to provide opencrypto offload support for those chipsets.
Reviewed by: pauamma, emaste
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35817
While uart could be detected completely through plug and play means, add
it here for two reasons. First, we don't do that from the loader, so
it's not available as a console. Second, even if we did do it from the
loader, there's a limitation in the system today that console drivers
must be compiled into the kernel because the console is selected before
external modules are linked into the kernel. Adding it only increases
the kernel size by ~14k as well.
Sponsored by: Netflix
Idea liked by: des, rpokala, brooks, jhb
This is an initial commit for RDMA FreeBSD driver for Intel(R) Ethernet
Controller E810, called irdma. Supporting both RoCEv2 and iWARP
protocols in per-PF manner, RoCEv2 being the default.
Testing has been done using krping tool, perftest, ucmatose, rping,
ud_pingpong, rc_pingpong and others.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: #manpages (pauamma_gundo.com) [documentation]
MFC after: 1 week
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D34690
This option was never enabled in GENERIC and does not appear to work
(the cdevsw is stored in a global array but never passed to make_dev
to be associated with a character device).
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D35008
The vga and splash devices are part of the sc(4) system console. vt(4)
uses the vt_vga driver instead, and has some limited splash support
directly in vt_core.c. Leave the sc(4) options in GENERIC/MINIMAL (for
now) but group them together under an sc(4) comment.
Sponsored by: The FreeBSD Foundation
Followup to b8cf1c5c30, remove from MINIMAL in addition to GENERIC.
options VESA / vesa.ko provides VESA Bios Extensions (VBE) support for
the legacy sc(4) console. It is not used by the default console, vt(4).
PR: 253733
Fixes: b8cf1c5c30 ("Remove options VESA from x86 GENERIC")
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
options VESA / vesa.ko provides VESA Bios Extensions (VBE) support for
the legacy sc(4) console. It is not used by the default console, vt(4).
There is a report[1] of an incompatibility between VESA and the Nvidia
driver breaking suspend/resume. Since VESA is not used by the default
configuration anyway, just remove options VESA from GENERIC. The kernel
module is still available and may be loaded by sc(4) users who want to
select a VBE mode.
(Note that vt(4) does not support selecting a VBE mode. The loader can
set a VBE mode and vt(4) will use it via the vt_vbefb driver.)
[1] https://lists.freebsd.org/archives/freebsd-hackers/2021-November/000469.html
PR: 253733
Reported by: Stefan Blachmann [1]
Reviewed by: imp, manu, tsoome
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33141
Belatedly remove twa(4). It was supposed to go before 13.0, but was
overlooked.
Sponsored by: Netflix
Relnotes: yes
Reviewed by: scottl
Differential Revision: https://reviews.freebsd.org/D33114
Belatedly remove esp(4). It was tagged as gone in 13, but was overlooked
until now.
Sponsored by: Netflix
Reviewed by: scottl
Differential Revision: https://reviews.freebsd.org/D33115
Belatedly remove amr(4). It was slated to depart before 13.0 but was
overlooked until now.
Sponsored by: Netflix
Relnotes: yes
Reviewed by: scottl
Differential Revision: https://reviews.freebsd.org/D33113
Belatedly remove iir(4). It was slated to go before 13, but was
overlooked.
Sponsored by: Netflix
Relnotes: yes
Reviewed by: scottl
Differential Revision: https://reviews.freebsd.org/D33112
We'd said this was going away in 13, but was overlooked. Belatedly
remove.
Sponsored by: Netflix
Relnotes: yes
Reviewed by: scottl
Differential Revision: https://reviews.freebsd.org/D33111
Define CC_NEWRENO in all the appropriate DEFAULTS and std.* config
files. It's the default congestion control algorithm. Add code to cc.c
so that CC_DEFAULT is "newreno" if it's not overriden in the config
file.
Sponsored by: Netflix
Fixes: b8d60729de ("tcp: Congestion control cleanup.")
Revired by: manu, hselasky, jhb, glebius, tuexen
Differential Revision: https://reviews.freebsd.org/D32964
The MINIMAL configs were overlooked. They are compiled as part of
universe, so this broke universe builds. Add the same defafults as for
GENERIC.
Sponsored by: Netflix
NOTE: HEADS UP read the note below if your kernel config is not including GENERIC!!
This patch does a bit of cleanup on TCP congestion control modules. There were some rather
interesting surprises that one could get i.e. where you use a socket option to change
from one CC (say cc_cubic) to another CC (say cc_vegas) and you could in theory get
a memory failure and end up on cc_newreno. This is not what one would expect. The
new code fixes this by requiring a cc_data_sz() function so we can malloc with M_WAITOK
and pass in to the init function preallocated memory. The CC init is expected in this
case *not* to fail but if it does and a module does break the
"no fail with memory given" contract we do fall back to the CC that was in place at the time.
This also fixes up a set of common newreno utilities that can be shared amongst other
CC modules instead of the other CC modules reaching into newreno and executing
what they think is a "common and understood" function. Lets put these functions in
cc.c and that way we have a common place that is easily findable by future developers or
bug fixers. This also allows newreno to evolve and grow support for its features i.e. ABE
and HYSTART++ without having to dance through hoops for other CC modules, instead
both newreno and the other modules just call into the common functions if they desire
that behavior or roll there own if that makes more sense.
Note: This commit changes the kernel configuration!! If you are not using GENERIC in
some form you must add a CC module option (one of CC_NEWRENO, CC_VEGAS, CC_CUBIC,
CC_CDG, CC_CHD, CC_DCTCP, CC_HTCP, CC_HD). You can have more than one defined
as well if you desire. Note that if you create a kernel configuration that does not
define a congestion control module and includes INET or INET6 the kernel compile will
break. Also you need to define a default, generic adds 'options CC_DEFAULT=\"newreno\"
but you can specify any string that represents the name of the CC module (same names
that show up in the CC module list under net.inet.tcp.cc). If you fail to add the
options CC_DEFAULT in your kernel configuration the kernel build will also break.
Reviewed by: Michael Tuexen
Sponsored by: Netflix Inc.
RELNOTES:YES
Differential Revision: https://reviews.freebsd.org/D32693
Remove the option from NOTES/LINT, and add to NOTES for powerpc and
riscv.
PR: 259036
Requested by: John Hay <john@sanren.ac.za>
Discussed with: ian, imp
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
According to https://github.com/NuxiNL/cloudlibc:
CloudABI is no longer being maintained. It was an awesome experiment,
but it never got enough traction to be sustainable.
There is no reason to keep it in FreeBSD.
Approved by: ed (private mail)
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D31923
