Refer to sockets rather than processes, since one can have multiple
sockets in a load-balancing group within the same process.
MFC after: 1 week
Sponsored by: Modirum MDPay
Sponsored by: Klara, Inc.
This reverts commit 76e6e4d72f.
Several programs in the tree use -1 instead of INT_MAX to use
the maximum value. Thanks to Eugene Grosbein for pointing this
out.
Ensure that a negative backlog argument is handled as it if was 0.
Reviewed by: markj@, glebius@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D31821
This reverts commit 1c2be25f60.
kib@ pointed out that it is perfectly fine to write at arbitrary regular
file offsets. For example, in a 4K block size character device, geom
doesn't support writing / reading 515 byte blocks. The description is
perhaps not applicable to all EINVALs returned.
The read system call will return EINVAL if the current file offset is
not a multiple of the block size. This also applies to write(2). Add an
entry for EINVAL about this error to both man pages.
PR: 91149
Event: Aberdeen Hackathon 2022
Differential Revision: https://reviews.freebsd.org/D24617
Long ago, ktr_tid was ktr_buffer which pointed to the buffer following
the header and was used internally in the kernel. Use was removed in
efbbbf570d70b and it was repurposed as ktr_kid in c6854c347f4d8. For
ABI reasons, it stayed an intptr_t rather than becoming an lwpid_t at
the time. Since it doesn't hold a pointer any more (unless you have
a ktrace.out from 2005), change the type to long which is alwasy the
same size on all supported architectures. Add a suggestion to change
the type to lwpid_t (__int32_t) on a future ABI break.
Remove most remaining references to ktr_buffer, retaing a comment in
kdump.c explaining why negative values are treated as 0. While here,
accept that pid_t and lwpid_t are of type int and simplify casts in
printf.
This changed was motivated by CheriBSD where intptr_t is 16-bytes
in the pure-capability ABI.
Reviewed by: kib, markj
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D36599
The divert(4) is not a protocol of IPv4. It is a socket to
intercept packets from ipfw(4) to userland and re-inject them
back. It can divert and re-inject IPv4 and IPv6 packets today,
but potentially it is not limited to these two protocols. The
IPPROTO_DIVERT does not belong to known IP protocols, it
doesn't even fit into u_char. I guess, the implementation of
divert(4) was done the way it is done basically because it was
easier to do it this way, back when protocols for sockets were
intertwined with IP protocols and domains were statically
compiled in.
Moving divert(4) out of inetsw accomplished two important things:
1) IPDIVERT is getting much closer to be not dependent on INET.
This will be finalized in following changes.
2) Now divert socket no longer aliases with raw IPv4 socket.
Domain/proto selection code won't need a hack for SOCK_RAW and
multiple entries in inetsw implementing different flavors of
raw socket can merge into one without requirement of raw IPv4
being the last member of dom_protosw.
Differential revision: https://reviews.freebsd.org/D36379
o Undocument sockets that are no longer supported, or never were.
o Add AF_HYPERV. Note: PF_HYPERV isn't defined, no typo here.
o Point at ip(4) and ip6(4) instead of unwelcoming "not described here".
Reviewed by: gbe, markj
Differential revision: https://reviews.freebsd.org/D36284
This has already been done for most files that have the Foundation as
the only listed copyright holder. Do it now for files that list
multiple copyright holders, but have the Foundation copyright in its own
section.
Sponsored by: The FreeBSD Foundation
Implement Linux-variant of MSG_TRUNC input flag used in recv(), recvfrom() and recvmsg().
Posix defines MSG_TRUNC as an output flag, indicating packet/datagram truncation.
Linux extended it a while (~15+ years) ago to act as input flag,
resulting in returning the full packet size regarless of the input
buffer size.
It's a (relatively) popular pattern to do recvmsg( MSG_PEEK | MSG_TRUNC) to get the
packet size, allocate the buffer and issue another call to fetch the packet.
In particular, it's popular in userland netlink code, which is the primary driving factor of this change.
This commit implements the MSG_TRUNC support for SOCK_DGRAM sockets (udp, unix and all soreceive_generic() users).
PR: kern/176322
Reviewed by: pauamma(doc)
Differential Revision: https://reviews.freebsd.org/D35909
MFC after: 1 month
As per the updated FreeBSD copyright template. These were unambiguous
cases where the Foundation was the only listed copyright holder.
Sponsored by: The FreeBSD Foundation
When pselect is passed a null pointer for the signal mask, the standard
says it shall behave like select (except for the different timeout
arg). Make a note of that here.
Sponsored by: Netflix
Instead of returning EMSGSIZE pass the error code from fdallocn() directly
to userland. That would be EMFILE, which makes much more sense. This
error code is not listed in the specification[1], but the specification
doesn't cover such edge case at all. Meanwhile the specification lists
EMSGSIZE as the error code for invalid value of msg_iovlen, and FreeBSD
follows that, see sys_recmsg(). Differentiating these two cases will make
a developer/admin life much easier when debugging.
[1] https://pubs.opengroup.org/onlinepubs/9699919799/functions/recvmsg.html
Reviewed by: markj
Differential revision: https://reviews.freebsd.org/D35640
Commit e0e0323354 removed compat stubs for
kernels that did not have futimens() and utimensat() system calls, but
removed the documentation for them in the manual page only partially.
Remove the rest of the documentation of the compatibility code.
MFC after: 1 week
Linux has more tolerant checks of the user supplied cpuset_t's.
Minimum cpuset_t size that the Linux kernel permits in case of
getaffinity() is the maximum CPU id, present in the system / NBBY,
the maximum size is not limited.
For setaffinity(), Linux does not limit the size of the user-provided
cpuset_t, internally using only the meaningful part of the set, where
the upper bound is the maximum CPU id, present in the system, no larger
than the size of the kernel cpuset_t.
Unlike FreeBSD, Linux ignores high bits if set in the setaffinity(),
so clear it in the sched_setaffinity() and Linuxulator itself.
Reviewed by: Pau Amma (man pages)
In collaboration with: jhb
Differential revision: https://reviews.freebsd.org/D34849
MFC after: 2 weeks
There are some sections which could be improved
and work to do so is on going. The work will be
covered via 'X-MFC-WITH' commits.
Obtained from: OpenBSD
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D34759
Problem is that open(O_PATH) on nullfs -o nocache is broken then,
because there is no reference on the vnode after the open syscall exits.
Reported and tested by: ambrisko
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The error control was not properly implemented. "changelist" is const, hence
event.flags is never changed by the syscall.
PR: 196844
Reported by: eugen@
Reviewed by: PauAmma <pauamma@gundo.com>
Approved by: eugen@
Fixes: 8c231786f0
To be more compatible to IEEE Std 1003.1-2008 (“POSIX.1”).
Reviewed by: mjg, Pau Amma (doc)
Differential revision: https://reviews.freebsd.org/D34680
MFC after: 2 weeks
This adds the PT_GETREGSET and PT_SETREGSET ptrace types. These can be
used to access all the registers from a specified core dump note type.
The NT_PRSTATUS and NT_FPREGSET notes are initially supported. Other
machine-dependant types are expected to be added in the future.
The ptrace addr points to a struct iovec pointing at memory to hold the
registers along with its length. On success the length in the iovec is
updated to tell userspace the actual length the kernel wrote or, if the
base address is NULL, the length the kernel would have written.
Because the data field is an int the arguments are backwards when
compared to the Linux PTRACE_GETREGSET call.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19831
The manpage has contained the following verbiage on the matter for just
under 31 years:
"At least one argument must be present in the array"
Previous to this version, it had been prefaced with the weakening phrase
"By convention."
Carry through and document it the rest of the way. Allowing argc == 0
has been a source of security issues in the past, and it's hard to
imagine a valid use-case for allowing it. Toss back EINVAL if we ended
up not copying in any args for *execve().
The manpage change can be considered "Obtained from: OpenBSD"
Reviewed by: emaste, kib, markj (all previous version)
Differential Revision: https://reviews.freebsd.org/D34045
Reviewed by: kib, markj
Obtained from: CheriBSD
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33988
Add an idletime user group that allows non-root users to run processes
with idle scheduling priority. Privileges are granted by a MAC policy in
the mac_priority module. For this purpose, the kernel privilege
PRIV_SCHED_IDPRIO was added to sys/priv.h (kernel module ABI change).
Deprecate the system wide sysctl(8) knob
security.bsd.unprivileged_idprio which lets any user run idle priority
processes, regardless of context. While the knob is still working, it is
marked as deprecated in the description and in the man pages.
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D33338
There's no point in a knob to avoid installing a half dozen manpages.
It's undocumented and unused in the tree. Online, the only metions
I've found are the FreeBSD source tree, a commit in DragonFly BSD
removing it, and some lists of build options for small systems where
it's inevitably redundant due to an accompanying NO_MAN.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D33310
