Change vm_object_madvise() so that it checks whether the page is invalid
or unmanaged before acquiring the page queues lock. Neither of these
tests require that lock. Moreover, a better way of testing if the page
is unmanaged is to test the type of vm object. This avoids a pointless
vm_page_lookup().
Import OpenSolaris revision 7837:001de5627df3
It includes the following changes:
- parallel reads in traversal code (Bug ID 6333409)
- faster traversal for zfs send (Bug ID 6418042)
- traversal code cleanup (Bug ID 6725675)
- fix for two scrub related bugs (Bug ID 6729696, 6730101)
- fix assertion in dbuf_verify (Bug ID 6752226)
- fix panic during zfs send with i/o errors (Bug ID 6577985)
- replace P2CROSS with P2BOUNDARY (Bug ID 6725680)
List of OpenSolaris Bug IDs:
6333409, 6418042, 6757112, 6725668, 6725675, 6725680,
6725698, 6729696, 6730101, 6752226, 6577985, 6755042
Approved by: pjd, delphij (mentor)
Obtained from: OpenSolaris (multiple Bug IDs)
If controller received bad frames make sure to update newly added
RFA. Also drop frames that have either CRC error or alignment
error. Normally bad frames are not received at all. But controllers
running in promiscuous mode will receive bad frames. 82557 will
also receive bad frames to receive VLAN oversized frames.
While I'm here mark RNR condition if driver happen to see RNR in
RFA status and restart RU to receive frames again. Because driver
checks all received frames in RX loop, RNR condition could be set
in the middle of RX processing. Just relying on RNR interrupt was
not enough.
This change fixes "Memory modified after free" issue when fxp(4)
is running as a member of if_bridge(4).
Tested by: Larry Baird <lab <> gta dot com>
r208081:
Controller updates RFA via DMA so driver needs synchronization.
Add missing BUS_DMASYNC_POSTWRITE and BUS_DMASYNC_PREREAD.
r208083:
Dont' allow dma map load deferring. fxp(4) is not able to handle
EINPROGRESS.
Initialize the callout structure earlier in attach before calling any
routines that can fail since ciss_free() always tries to stop and drain
the callout.
Import mvs(4) - Marvell 88SX50XX/88SX60XX/88SX70XX/SoC SATA controllers
driver for CAM ATA subsystem. This driver supports same hardware as
atamarvell, ataadaptec and atamvsata drivers from ata(4), but provides
many additional features, such as NCQ, PMP, etc.
- Add quirk handling for Sun Fire V1280. The firmware of these machines
provides no ino-bitmap properties so forge them using the default set
of controller interrupts and let schizo_setup_intr() take care of the
children, hoping for non-fancy routing.
- Enable DMA write parity error interrupts on Schizo with a working
implementation.
- Let schizo_pci_bus() only panic in case of fatal errors as the interrupt
triggered by the error the firmware of Sun Fire V890 as well as 280R
with version 7 Schizo caused may happen as late as using the HBA and not
only prior to touching the PCI bus (in the former case the actual error
still is fatal but we clear it before touching the PCI bus).
While at it count and export non-fatal error interrupts via sysctl(9).
- Remove unnecessary locking from schizo_ue().
- Change the db_printf return value in order to catch up with printf
- Make witness_list_locks() and witness_display_spinlock() accept
callbacks for printf-like functions in order to queue the output on the
correct channel.
Fix an issue with the dynamic pcpu/vnet data allocators.
We cannot expect that modspace is the last entry in the linker
set and thus that modspace + possible extra space up to PAGE_SIZE
would be contiguous. For the moment do not support more than
*_MODMIN space and ignore the extra space.
Discussed with: jeff, rwatson (briefly)
Reviewed by: jeff
Sponsored by: The FreeBSD Foundation
Sponsored by: CK Software GmbH
Remove if_ar, if_ray, if_sr, if_ppp, if_sl to reflect the current modules
available, they were removed due to NEEDSGIANT.
While I'm there, add if_et which was missed quite a while ago.
Back out r203140 which was causing problems when the first and the last
microframe slot was not in the smask. The problem was that the EHCI driver was
then thinking that the transfer was immediately complete in some cases. Which
could lead to freeze-like situations, which can be recovered by unplugging the
USB device.
If a USB device is suspended and a USB set config request is issued when the
USB enumeration lock is locked, then the USB stack fails to resume the device
because locking the USB enumeration lock is part of the resume procedure. To
solve this issue a new lock is introduced which only protects the suspend and
resume callbacks, which can be dropped inside the usbd_do_request_flags()
function, to allow suspend and resume during so-called enumeration operations.
SiS190 supports RX 10 bytes padding, CRC stripping as well as VLAN
hardware tag insertion/stripping. Remove conditional code that
disables these hardware features on SiS190. Also nuke RX fixup code
which is no more required on strict-alignment architectures because
SiS190 supports RX 10 bytes padding.
Now all hardware features except jumbo frame and WOL are supported.
Thanks to Masa Murayama who confirmed SiS190 also has the same
hardware features of SiS191.
I guess the only difference between SiS191 and SiS190 would be
jumbo frame support. It will be implemented in near future.
Implement TSO and TSO over VLAN. Increase number of allowed
fragmentation of mbuf chain to 32 from 16 because TSO can send 64KB
sized packet which in turn requires long list of mbuf chain. Due to
lack of documentation, I'm not sure whether driver have to pull up
ethernet/IP/TCP header with options to make controller work but
driver have to parse TCP header to update pseudo TCP checksum
anyway. The controller expects pseudo TCP checksum computed by
upper stack and the checksum should follow the MS NDIS
specification to make TSO work.
Tested by: xclin <xclin <> cs dot nctu dot edu dot tw >
Export hardware MAC statistics through sysctl node. Previously
fxp(4) already used to extract most hardware MAC statistics but it
didn't show them. With this change, all MAC statistics counters
are exported. Because there are a couple of new counters for 82558
and 82559, enable extended MAC statistics functionality to get
these counters. Accoring to public data sheet, 82559 MAC statistics
return 24 DWORD counters(3 counters are unknown at this moment) so
increase MAC counter structure to meet the MAC statistics block size.
The completion of MAC counter dump is now checked against
FXP_STATS_DR_COMPLETE status code which is appended at the end of
status block. Previously fxp(4) ignored the status of the
FXP_SCB_COMMAND_CU_DUMPRESET command. fxp(4) does not wait for the
completion of pending command before issuing
FXP_SCB_COMMAND_CU_DUMPRESET. Instead it skips the command and try
it next time. This scheme may show better performance but there is
chance to loose updated counters after stopping controller. So make
sure to update MAC statistics in fxp_stop().
While I'm here move sysctl node creation to fxp_sysctl_node().
Tested by: Larry Baird < lab <> gta dot com >
8255x configure command requires number of bytes of configuration
table. The default size of the configuration table was 22 bytes. To
use extended feature of 82550/82551 the configuration table size
was expanded to 32 bytes. The added configuration for 82550/82551
specifies VLAN hardware tagging and IPSec configuration as well as
TCO.
To make configuration easier fxp(4) used a configuration template
and the template was copied to configuration table. After that,
some parameters of the configuration table was changed depending on
controller type and operation mode. However the size of template
was 22 bytes so some configuration parameters were not properly
initialized on 82550/82551.
Fix this by increasing the template size. For 82557, 82558 and
82559 the size of the configuration is still 22 bytes.
For detach procfs ctl command, also clear P_STOPPED_TRACE process stop
flag, and for each thread, TDB_SUSPEND debug flag, same as it is done by
exit1() for orphaned debugee.
