Change 4787572d05 made if_alloc_domain() never fail, then also do the
wrappers if_alloc(), if_alloc_dev(), and if_gethandle().
No functional change intended.
Reviewed by: kp, imp, glebius, stevek
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D45740
(cherry picked from commit aa3860851b)
The pseudo_AF_HDRCMPLT check is already being done in if_loop and
just needed to be ported over to if_ic, if_wg, if_disc, if_gif,
if_gre, if_me, if_tuntap and ng_iface. This is needed in order to
allow these interfaces to work properly with e.g., tcpreplay.
PR: 256587
Reviewed by: markj
MFC after: 2 weeks
Pull Request: https://github.com/freebsd/freebsd-src/pull/876
(cherry picked from commit 2cb0fce24d)
Update the I2C controller logic to be more consistent with the
newer version of the controller reference manual.
This makes it work better on modern LS/LX platforms and avoids
unnecessary delays. Also fixes a lock leak.
Tested by: bz (LS1088a FDT), Pierre-Luc Drouin (Honeycomb, ACPI)
(cherry picked from commit 44847114bd)
Move the code from the arm specific to the iicbus controller directory.
Split up between general logic and bus attachment code.
Add support for ACPI attachment in addition to FDT.
Tested by: bz (LS1088a FDT), Pierre-Luc Drouin (Honeycomb, ACPI)
Based on: D24917 by Val Packett (initial early version)
(cherry picked from commit 5ca8e32633)
Add support for the 4 channel I2C switch from NXP by adding a new
description struct and the list entries. Compared to x=[2345] which
require code to support the INT, for this one no further changes are
needed.
Tested on: WHLE-LS1088A using a SPF+
Reviewed by: imp
(cherry picked from commit c81df1c112)
Previously, the function would return early if RB_POWERCYCLE was
specified without RB_POWEROFF. Those flags are exclusive at the moment,
that is, they are never set together.
Søren Schmidt (sos) uses a similar but extended patch locally.
(cherry picked from commit 8b408fc6f2)
(cherry picked from commit a044cf60bd)
Fall-through to non-FDT probe code if no matching device node is found.
While here, fix indentation of the switch statement.
Also, make the device description for the hints-based attachment the
same as for FDT attachment.
Fixes: 2486b446db ds1307: add support for the EPSON RX-8035SA I2C RTC
(cherry picked from commit 34694f3da7)
While "fast" taskqueue may be more expensive due to spinlock use,
when used mainly for timeout tasks it allows to avoid extra context
switches to and from callout thread, that is even more expensive.
MFC after: 1 month
(cherry picked from commit 358453ce9b)
taskqueue_enqueue_timeout(0) is equivalent to taskqueue_enqueue(),
so no need to create a separate periodic_task and event_task to run
exactly the same handler.
MFC after: 1 month
(cherry picked from commit a8f80c0c16)
My previous commit by reducing precision reduced the sampling rate
from 60Hz to 40Hz on idle system. Return it back to 60-80Hz range,
that should be good for mouse smoothness on 60Hz displays.
MFC after: 1 months
(cherry picked from commit 68e457df02)
It should make pause interval less strict.
While there, add cpu_spinwait() into a tight spin wait loop to burn
less power and let other SMT thread work more.
MFC after: 1 month
(cherry picked from commit a74df3f96e)
In sampling mode some devices return same data indefinitely even if
there is nothing to report. Previous idle hysteresis implementation
activated only when device returned no data, so some devices ended up
polled at fast rate all the time. This new implementation compares
each new report with the previous, and, if they are identical, after
reaching threshold also drop sampling rate to slow.
On my Dell XPS 13 9310 with iichid(4) touchscreen and touchpad this
reduces idle power consumption by ~0.5W by reducing number of context
switches in the driver from ~4000 to ~700 per second when not touched.
MFC after: 1 month
(cherry picked from commit 8c86b98124)
This is a simple RTC driver for the rv3032 from Microcrystal.
Just the basic functionality is implemented (no timer, alarm etc ..).
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D41995
(cherry picked from commit 1d6a6a5244)
This IP is found in Xilinx SoC, it only been tested on ZynqMP (arm64)
so only enable it there for now.
Differential Revision: https://reviews.freebsd.org/D41994
(cherry picked from commit 137b58e4d2)
No reason that they should live directly under iicbus
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D41913
(cherry picked from commit 7c569caa0a)
No reason that they should live directly under iicbus
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D41911
(cherry picked from commit 06589d6e02)
Those are (mainly) pwm controller so move it under a new subdirectory.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D41910
(cherry picked from commit 22d7dd834b)
No reason that they should live directly under iicbus
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D41908
(cherry picked from commit 2f16049c98)
The folder is a mess so start moving stuff into sub-directories.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D41907
(cherry picked from commit 580d00f42f)
We need i2c first to set it to MIDDLE, then we need one of the pmics
so set them to LATE, only then we can attach iodomain which needs some
regulators exposed by the pmic so set it to LAST.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Some devices like Apple HID-over-SPI may contain more than one report
descriptors necessitating creation of multiple hidbus children.
Add indentificator of child devices to distinct them.
No functional changes intended.
Differential Revision: https://reviews.freebsd.org/D41246
After removing the -FreeBSD and -NetBSD, we're left with a nuber of
BSD-2-Clause AND BSD-2-Clause, so tidy that up.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
The SPDX folks have obsoleted the BSD-2-Clause-NetBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
Use it when possible, instead of separated flags.
No functional change intended.
Reviewed by: hselasky, erj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D39466
Add a PNP macro in order to load this driver automatically.
While here check if the device is enabled in DT before probing it.
Reviewed by: wma
Sponsored by: Alstom
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D37579
Use correct resolution by compat table. If dtb is not defined use default 9 bit mode.
11 bit detection is called if 9 bit mode is used.
Sysctl resolution variable is added to change resolution in case.
Some sensors didn't pull ACK while reading from nonexistent registers and it caused I2C
read error and detect failure, so now detect failure does not cause driver break.
Obtained from: Semihalf
Sponsored by: Alstom
Differential revision: https://reviews.freebsd.org/D37497
Polarity inversion register was mistekanly filled with the value of
the direction configuration register.
Correct that.
Reviewed by: kd
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D37262
This merges TCA6416, TCA6408 drivers and adds PCA9555 support.
They handle 8 pin and 16 pin ICs with basic INPUT/OUTPUT functionality.
The register map is fairly similar so there is no point in having two
separate drivers.
Reviewed by: kd
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D36559
My Adafruit PCF8523 RTC on either RPi2B or RPi3B+ failed to work around
80 ~ 90 % of boot-ups, by printing the following log lines.
nxprtc0: <NXP PCF8523 RTC> at addr 0xd0 on iicbus0
nxprtc0: cannot set up timer
Warning: no time-of-day clock registered, system time will not be set accurately
This is due to pcf8523_start_timer(sc) returned non-zero in
nxprtc_start() due to a register read failure of PCF8523_R_TMR_A_FREQ or
PCF8523_R_TMR_CLKOUT or a failure to program a new value.
The pause_sbt("nxpbat") sleep was too short and caused the register
access failures.
PR: 266093
The register map is fairly similar, with one difference in the local
sensor temperature register width.
Both devices support reading two sensors - "local" and "remote".
While here add support for the latter one.
The ADT7461 doesn't update the temperature correctly, unless a write
transaction is done before every read.
Do just that as a workaround for this issue.
Tested on LS1046ARDB.
Reviewed by: manu
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D36464
With the addition of clkgen devices to the Armada38x, there is
no longer any need to use the get_tclk() hack.
Reviewed by: manu
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D36456
The EPSON RX-8035SA I2C RTC has a similar time register layout to the
ds1307 family, with some minor differences in bit positions, polarity
and control registers. Further generalize ds1307 to make it easier
to add more compatible chips and add support for the EPSON RX-8035SA.
MFC after: 6 days
Sponsored by: Traverse Technologies
Differential Revision: https://reviews.freebsd.org/D35837
The two implementations for the pca9548 switch and the pca9547 mux
seemed close enough so we can put them together and with a bit more
abstraction add pca9540 support.
While here apply a bit of consistency in variable and driver naming and
use device_has_property instead of the FDT-only OF_ variant.
This disconnects pca9547 from the build but does not yet delete it.
MFC after: 2 weeks
Reviewed by: mmel (earlier version), avg
Differential Revision: https://reviews.freebsd.org/D35701
