To match documentation.
Reported by: Ihor Dutchak <ihor.youw@gmail.com>
PR: 286155
MFC after: 3 days
(cherry picked from commit fe4bdd889b5d722faa3a66e2c7d9a248e527cdb2)
to Linux hidraw compatibility API.
Respective Linux commit f43d3870cafa made by Dean Camera message is:
Currently the hidraw module can only read and write feature HID reports on
demand, via dedicated ioctls. Input reports are read from the device through
the read() interface, while output reports are written through the write
interface().
This is insufficient; it is desirable in many situations to be able to read and
write input and output reports through the control interface to cover
additional scenarios:
- Reading an input report by its report ID, to get initial state
- Writing an input report, to set initial input state in the device
- Reading an output report by its report ID, to obtain current state
- Writing an output report by its report ID, out of band
This patch adds these missing ioctl requests to read and write the remaining
HID report types. Note that not all HID backends will neccesarily support this
(e.g. while the USB link layer supports setting Input reports, others may not).
FreeBSD native uhid(4) compatible API already has similar ioctls.
MFC after: 3 days
(cherry picked from commit fd6690e2d5cd5b15fce2c74ab0cac77a83514f6a)
Wrong signedness of usage value results in inverted range check in hmt(4)
driver that allows out of bound array access leading to panic.
Reported by: many
Sponsored by: Future Crew, LLC
Obtained from: NetBSD
NetBSD PR: kern/53605
PR: 274014, 282592
(cherry picked from commit 38b67578fb4bbf568f7012ca3921a4d15cfe7c5d)
HIDRAW_GET_REPORT ioctl is documented to update hgd_actlen on return
with the number of bytes copied. It does not do this.
Reviewed by: wulf
PR: 282790
MFC after: 1 week
(cherry picked from commit f4f46a2eef3be6d19c65a4ca4ee70f365dd5be4f)
If copyin() fails, the driver will proceed blindly with a zeroed buffer,
which is not what we want. In preparation for annotating copyin() with
__result_use_check, start checking for errors.
Reviewed by: wulf
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D43102
(cherry picked from commit e452fa70d50761b5fe5f19c3c93c107be116728c)
Some touchpads places button usages (in HID report descriptor) in to
the 2-nd level collection rather than in to the top level one. That
confuses current code. Remove collection level check in HID report
descriptor parser to fix device detection.
Reported by: Peter Much <pmc@citylink.dinoex.sub.org>
PR: 267094
(cherry picked from commit 1d46c8e5c2702c141c6be982b3ca44e74d1cb8f1)
The driver provides support for Human Interface Devices (HID) on
Serial Peripheral Interface (SPI) buses on Apple Intel Macs
produced in 2015-2018.
The driver appears to work more stable after installation of Darwin OSI
in acpi(4) driver.
To install Darwin OSI insert following lines into /boot/loader.conf:
hw.acpi.install_interface="Darwin"
hw.acpi.remove_interface="Windows 2009, Windows 2012"
Reviewed by: wulf
Differential revision: https://reviews.freebsd.org/D39863
In commit c77bfaa750 uhid(4) gained support for ioctl from
USB_GET_DEVICEINFO. This is used in libraries like libfido2 to
retrieve information about a device.
This commit adds binary compatible version to hidraw(4).
PR: 264843
MFC after: 1 month
Requested by: grembo
Some devices like Apple HID-over-SPI may contain more than one report
descriptors necessitating creation of multiple hidbus children.
Add indentificator of child devices to distinct them.
No functional changes intended.
Differential Revision: https://reviews.freebsd.org/D41246
Refactor to eliminate duplicated rate and delay tables, with minor style
tweaks for changed lines. Remove an obsolete comment about needing to
convert from microseconds to ticks (that's done elsewhere). Remove
traiing whitespace in kbdcontrol.c.
Except for the new warning, no change in behavior
Sponsored by: DSS GmbH
Reviewed by: imp [minor style tweaks as well]
Pull Request: https://github.com/freebsd/pull/683
Differential Revision: https://reviews.freebsd.org/D38818
The SPDX folks have obsoleted the BSD-2-Clause-NetBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
The MT2 uses a compact report format, but otherwise is similar in many
ways to the internal trackpads, it even uses the same mode switching
commands.
Reviewed by: wulf
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D34437
hid_input is equal to 0. It is leftover from NetBSD code.
Reviewed by: hselasky, wulf
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D28149
FreeBSD-9 had introduced support for the full set of Unicode
characters to the parsing and processing of keymap character tables.
This support has been extended to cover the table for accented
characters that are reached via dead key combinations in FreeBSD-13.2.
New ioctls have been introduced to support both the pre-Unicode and
the Unicode formats and keyboard drivers have been extended to support
those ioctls.
This commit makes the ABI compatibility functions in the kernel
optional and dependent on COMPAT_FREEBSD13 in -CURRENT.
The kbdcontrol command in -CURRENT and 13-STABLE (before 13.2) has
been made ABI compatible with old kernels to allow a new world to be
run on an old kernel (that does not have full Unicode support for
keymaps).
This commit is not to merged back to 12-STABLE or 13-STABLE. It is
part of review D38465, which has been split into 3 separate commits
due to different MFC and life-time requirements of either commit.
Approved by: imp
Differential Revision: https://reviews.freebsd.org/D38465
Support for Unicode characters had been added to the keyboard code,
but there are keymaps that have accented characters accessed via dead
key combinations, and those were still restricted to 8 bit codes.
This update to kbd.c adds support for Unicode characters and
compatibility code that allows a kbdcontrol command built from kbio.h
without these patches to work on a new kernel.
Compatibility code that allows a new kbdcontrol binary running on an
old kernel to load and display the dead key map will be committed in a
separate commit.
Reviewed by: imp, brooks
Approved by: brooks
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D38381
Some Elantech trackpads have a mangled HID report descriptor, which
reads as having an incorrect input size (i.e. < IETP_REPORT_LEN_LO).
If the input size is incorrect, load a dummy report descriptor.
Reviewed by: wulf
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D38387
for all devices except Kensington Slimblade Trackball as it brokes
some other devices like Contour Rollermouse Red
Add a quirk for it as well.
Reported by: Atte Peltomäki <koston_AT_iki_DOT_fi>
PR: 267922
MFC after: 2 weeks
of various keyboard drivers.
EVIOCGRAB ioctl execution on /dev/input/event# device node gains
exclusive access to this device to caller. It is used mostly for
development purposes and remote control software. See e.g.
https://reviews.freebsd.org/D30020 which is the reason of creation
of this change.
Keyboard grabbing is disabled in KDB and during panics.
MFC with: 4a0db5e292
Tested by: corvink
Differential revision: https://reviews.freebsd.org/D30542
Make HIDIOCGRAWPHYS, HIDIOCGRAWNAME, and HIDIOCGRAWUNIQ return
the length of the copied out string (including the trailing NUL
character), so they behave like their Linux hidraw counterparts.
Reviewed by: wulf
Differential Revision: https://reviews.freebsd.org/D35233
