Add a "zzz_fw_ports_fwget.sh" script to each LinuxKPI based wireless
driver which in essential are all the same and in detail all different.
They extract information for fwget(8), wifi-firmware-* ports, man pages
and for iwlwififw also for the wiki.
Sponsored by: The FreeBSD Foundation
Suggested by: imp (to have automation in D44918)
(cherry picked from commit 96190b4fef)
Both drivers are not yet attached to the build so this change is
for people currently trying them out.
In 96ab16ebab the sys/rman.h include
was removed. In various wireless drivers we prefer to directly use
bus_dma functions rather than io* LinuxKPI once. In order to cast
the pointer we need sys/rman.h back for our native 'struct resource'
in their pci.c implementations.
Long-term we should consider providing some lkpi_-FreeBSD-specific
wrapper functions to avoid this problem.
MFC after: 3 days
(cherry picked from commit c8e7f78a3d)
Import BSD-3-Clause-Clear ath12k driver based on wireless-testing
(wt-2023-05-11) 711dca0ca3d77414f8f346e564e9c8640147f40d (after v6.4-rc1)
with further updates based on
(wt-2023-06-09) 7bd20e011626ccc3ad53e57873452b1716fcfaaa (after v6.4-rc5),
(wt-2023-07-24) 62e409149b62a285e89018e49b2e115757fb9022 (after v6.5-rc3),
(wt-2023-08-06) 2a220a15be657a24868368892e3e2caba2115283 (after v6.5-rc4),
(wt-2023-08-13) 81e147b1317ee7cde8b624ee8c0501b470d7e91c (after v6.5-rc5).
Complement the driver to make compile on FreeBSD
using LinuxKPI with changes covered by #ifdef (__FreeBSD__).
Add the module build framework but keep disconnected from the
build for now.
The current driver (or rather LinuxKPI) lacks support for some
"qcom" bits needed in order to get things working (as does ath11k).
There was interest by various people to enhance support further
for ath11k which will equally benefit ath12k.
Given the lack of full license texts on the files this is
imported under the draft policy for handling SPDX files (D29226)
and with approval for BSD-3-Clause-Clear. [1]
Approved by: core (jhb, 2023-05-11) [1]
MFC after: 20 days
This is a set of updates of the ath11k driver based on wireless-testing
(wt-2023-05-11) 711dca0ca3d77414f8f346e564e9c8640147f40d (after v6.4-rc1),
(wt-2023-06-09) 7bd20e011626ccc3ad53e57873452b1716fcfaaa (after v6.4-rc5),
(wt-2023-07-24) 62e409149b62a285e89018e49b2e115757fb9022 (after v6.5-rc3),
(wt-2023-08-06) 2a220a15be657a24868368892e3e2caba2115283 (after v6.5-rc4).
MFC after: 20 days
This is a set of updates of the ath10k driver based on wireless-testing
(wt-2023-05-11) 711dca0ca3d77414f8f346e564e9c8640147f40d (after v6.4-rc1),
(wt-2023-06-09) 7bd20e011626ccc3ad53e57873452b1716fcfaaa (after v6.4-rc5),
(wt-2023-07-24) 62e409149b62a285e89018e49b2e115757fb9022 (after v6.5-rc3),
(wt-2023-08-06) 2a220a15be657a24868368892e3e2caba2115283 (after v6.5-rc4).
MFC after: 20 days
During the last import a (debug) workaround to avoid an early firmware
crash was imported. In order to remember and to separate it from
upstream sources put it under #ifdef
MFC after: 20 days
Import BSD-3-Clause-Clear ath11k driver assumed to be
based on Linux kvalo/ath.git master at
6bae9de622d3ef4805aba40e763eb4b0975c4f6d.
Complement the driver to make compile on FreeBSD
using LinuxKPI with changes covered by #ifdef (__FreeBSD__).
Further select updates were applied since the initial import
in order to keep compiling along with other LinuxKPI based
drivers.
Add the module build framework but keep disconnected from the
build for now.
The current driver (or rather LinuxKPI) lacks support for some
"qcom" bits needed in order to get things working.
There was interest by various people to enhance support further.
We initially only plan to support PCI parts but it would be great
to further enhance qcom SoC support to run on several (cheap) APs.
The firmware is provided by port net/wifi-firmware-ath11k-kmod.
Given the lack of full license texts on most files this is
imported under the draft policy for handling SPDX files (D29226)
and with approval for BSD-3-Clause-Clear. [1]
Approved by: core (jhb, 2023-05-11) [1]
MFC after: 2 months
Import ISC-licensed ath10k driver assumed to be
based on Linux kvalo/ath.git master at
6bae9de622d3ef4805aba40e763eb4b0975c4f6d.
Import support to redirect fwlogs to kernel messages
from https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/389075
Complement the driver to make compile on FreeBSD
using LinuxKPI with changes covered by #ifdef (__FreeBSD__).
Further select updates were applied since the initial import
in order to keep compiling along with other LinuxKPI based
drivers.
Any other native driver using BUS_PROBE_DEFAULT will attach
ignoring this one by default given bsd_probe_return is set
to a lower priority.
Add the module build framework.
We only support PCI parts.
The firmware is provided by port net/wifi-firmware-ath10k-kmod.
Given the lack of full license texts on most files this is
imported under the draft policy for handling SPDX files (D29226). [1]
Approved by: core (emaste, 2022-04-08) [1]
MFC after: 2 months
Import common ISC-licensed athk parts assumed to be
based on Linux kvalo/ath.git master at
6bae9de622d3ef4805aba40e763eb4b0975c4f6d.
The only modification should be for FreeBSD module
handling in main.c.
Add the module build framework unconnected to the
build for now.
These files will be shared by ath1?k drivers.
MFC after: 2 months
