The way a sound driver currently registers to sound(4) is using the
following sequence of function calls:
1. pcm_register() to initialize snddev_info.
2. pcm_addchan() calls to create the device's primary channels.
3. pcm_setstatus() to do the final setup.
While using 3 different functions in a specific order might not be very
elegant, this pattern cannot be easily avoided. However, pcm_register()
and pcm_setstatus() are especially confusing, since one would
intuitively expect:
1. pcm_register() to actually do the registration, as opposed to a basic
initialization.
2. pcm_setstatus() to, as the name suggests, set some kind of status, as
opposed to finalizing the registration.
This patch renames pcm_register() to pcm_init(), and pcm_setstatus() to
pcm_register(). Drivers are modified accordingly.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Reviewed by: dev_submerge.ch
Differential Revision: https://reviews.freebsd.org/D47325
(cherry picked from commit 516a9c0212b003e1da0c6f4476dbe4f3f431606c)
On RISC-V, the root PIC (whether the PLIC or, as will be the case in
future, the local interrupt controller) cannot send IPIs, relying on
another means to trigger the necessary software interrupts (firmware
calls), but there are upcoming standard devices that will be able to
inject them, so we can't just put the firmware calls in the root PIC
driver.
Thus, split out a new intr_ipi_dev from intr_irq_root_dev to use for
sending IPIs. New devices can be registered with a given priority up
until the first IPI is set up, when the best device seen so far gets
frozen as the IPI device to use.
Reviewed by: mhorne
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D35899
(cherry picked from commit 103d39efe0c68cb2a808c306b14c3f473a02535d)
The static irq_root_ipicount variable is only ever written to (with the
value passed to irq_root_ipicount), never read. Moreover, the bcm2836
driver, as used by the Raspberry Pi 2B and 3A/B (but not 4, which uses a
GIC-400, though does have the legacy interrupt controller present too)
passes 0 as ipicount, despite implementing IPIs. It's thus inaccurate
and serves no purpose, so should be removed.
Reviewed by: mmel, imp, mhorne
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D35897
(cherry picked from commit e06afdb2856944d6db4e33d4bbe0e2dbbd057eb4)
Add support for GPIO internal pull up/down configuration on RPi4 family.
BCM2711 SoC on 4th generation Raspberry Pi changed the way to configure
its GPIO pins' internal pull up/down resistors. NetBSD already have
support for this change, and port it to FreeBSD is trivial.
This patch, based on the NetBSD commit adds the appropriate method for
BCM2711 and now we can properly configure the GPIO pins' pull status.
PR: 256372
Reviewed by: mhorne
Obtained from: NetBSD bb88cfa64ad8
Pull Request: https://github.com/freebsd/freebsd-src/pull/746
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
This was needed before INTRNG was in place and handling the push of
curthread->td_intr_frame. Since INTRNG now handles this, there is no
longer and need for playing around with the frame inside IPI interrupts.
This file defines a small API to be used by other drivers. If any of
these functions are called before the bcm_dma device has attached we
should handle the error gracefully. Fix a formatting quirk while here.
Reviewed by: manu
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D38756
The sdhci_bcm driver attach routine relies on bcm_dma already being
attached, in order to allocate a DMA channel. However, both drivers
attached at the default pass so this is not guaranteed. Newer RPI
firmware exposes this assumption, and the result is a NULL-dereference
in bcm_dma_allocate().
To fix this, use BUS_PASS_SUPPORTDEV for bcm_dma.
PR: 268835
Reviewed by: mhorne
MFC after: 1 week
This matches the return type of pmap_mapdev/bios.
Reviewed by: kib, markj
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D36548
This enables attachment on the RPI4, thus enabling the bcm2835_pwm
driver too. Per the device tree documentation, these compat strings are
equivalent, and no further changes to the driver are required.
https://lists.freebsd.org/archives/freebsd-arm/2021-June/000143.html
MFC after: 3 days
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
Reviewed by: kevans
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33829
Add a new ioctl to vt to make it possible to export RGB offsets
set by vt drivers. This is needed to fix colors on X and Mesa
on some machines, especially on modern PowerPC64 BE ones.
With the appropriate changes in SCFB, to use this ioctl to find
out the correct RGB offsets, this fixes wrong colors on Talos II
and Blackbird, when used with their built-in video cards.
Reviewed by: alfredo
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D29000
When handling a data irq, the sdhci driver calls the
sdhci_platform_will_handle() method, to determine if it should allow the
platform driver to handle the transfer or fall back to programmed I/O.
While dumping, the data irq path may be invoked directly (not from an
interrupt context), which the bcm2835_sdhci DMA code is not prepared to
handle. Return early in this case, to force the fallback to PIO.
Otherwise, the KASSERT that follows will be triggered, and the dump will
fail. On non-INVARIANTS kernels, the system will hang, waiting for a DMA
interrupt that will never arrive.
Reviewed by: kevans
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31893
Add generic mmc_helper which uses newly introduced device_*_property
api. Thanks to this change the sd/mmc drivers will be capable
of parsing both DT and ACPI description.
Ensure backward compatibility for all mmc_fdt_helper users.
Reviewed by: manu, mw
Sponsored by: Semihalf
Differential revision: https://reviews.freebsd.org/D31598
The hardware random number generator of the RPi4 differs slightly
from the version found on the RPi3.
This commit extends the existing bcm2835_rng driver to function on the RPi4.
Submitted by: James Mintram <me at jamesrm dot com>
Reviewed by: markm, cem, delphij
Approved by: csprng(cem, markm)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D22493
Fixes for Raspberry Pi 4B PCIe / USB:
- Pass through a DMA tag for the controller.
- In theory the controller can access the lower 3 GB, but testing found
that unreliable. OpenBSD also restricts DMA to the lowest 960 MiB.
- Rename some constants to be a bit more meaningful.
Submitted by: Robert Crowston, crowston at protonmail.com
Reviewed by: mkarels, outside reviewers
Differential Revision: https://reviews.freebsd.org/D26344
These exist on the Raspberry Pi 3 and 4 and control and external IO
expander.
Reviewed by: manu
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25858
There are child nodes in the device tree, e.g. the Raspberry Pi firmware
GPIO device. Add support for this to be a bus so we can attach these
children.
Reviewed by: manu
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25848
The newer hardware revisions of the Raspberry Pi 4 removed the ability of
the VIA VL805 xhci controller to load its own firmware. Instead the
firmware must be installed at the appropriate time by the VideoCore
coprocessor.
Submitted by: Robert Crowston <crowston_protonmail.com>
Differential Revision: https://reviews.freebsd.org/D25261
The Raspberry Pi GPIO config and state messages incorrectly return with
the tag length set to 0. We then check this value to have the response
flag set. Work around this by setting the response flag when setting the
GPIO config or state and this value is zero.
Sponsored by: Innovate UK
Use the new Raspberry Pi firmware driver in the cpufreq driver. It is
intended all drivers that need to interact with the firmware will move to
use the firmware driver, this is the first.
Reviewed by: manu
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25609
