mirror of
https://github.com/opnsense/src.git
synced 2026-06-14 19:20:18 -04:00
Add a driver for FAN53555 based PMIC.
This commit is contained in:
parent
2756e13843
commit
e62f770bca
1 changed files with 477 additions and 0 deletions
477
sys/dev/iicbus/pmic/fan53555.c
Normal file
477
sys/dev/iicbus/pmic/fan53555.c
Normal file
|
|
@ -0,0 +1,477 @@
|
|||
/*-
|
||||
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
|
||||
*
|
||||
* Copyright (c) 2016 Jared McNeill <jmcneill@invisible.ca>
|
||||
* Copyright (c) 2018 Emmanuel Vadot <manu@FreeBSD.org>
|
||||
* Copyright (c) 2019 Michal Meloun <mmel@FreeBSD.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
#include <sys/cdefs.h>
|
||||
__FBSDID("$FreeBSD$");
|
||||
|
||||
#include <sys/param.h>
|
||||
#include <sys/bus.h>
|
||||
#include <sys/kernel.h>
|
||||
#include <sys/module.h>
|
||||
#include <sys/mutex.h>
|
||||
#include <sys/rman.h>
|
||||
#include <machine/bus.h>
|
||||
|
||||
#include <dev/iicbus/iiconf.h>
|
||||
#include <dev/iicbus/iicbus.h>
|
||||
|
||||
#include <dev/ofw/ofw_bus.h>
|
||||
#include <dev/ofw/ofw_bus_subr.h>
|
||||
|
||||
#include <dev/extres/regulator/regulator.h>
|
||||
|
||||
#include "regdev_if.h"
|
||||
|
||||
/* Registers */
|
||||
#define FAN53555_VSEL0 0x00
|
||||
#define FAN53555_VSEL1 0x01
|
||||
#define FAN53555_VSEL_ENA (1 << 7)
|
||||
#define FAN53555_VSEL_MODE (1 << 6)
|
||||
#define FAN53555_VSEL_MASK 0x3f
|
||||
#define FAN53555_CTRL 0x02
|
||||
#define FAN53555_ID1 0x03
|
||||
#define FAN53555_ID1_DIE_ID(x) (((x) >> 4) & 0x0F)
|
||||
#define FAN53555_ID2 0x04
|
||||
#define FAN53555_ID2_DIE_REV(x) (((x) >> 4) & 0x0F)
|
||||
#define FAN53555_MON 0x05
|
||||
|
||||
|
||||
#if 0
|
||||
#define dprintf(sc, format, arg...) \
|
||||
device_printf(sc->base_dev, "%s: " format, __func__, arg)
|
||||
#else
|
||||
#define dprintf(sc, format, arg...)
|
||||
#endif
|
||||
|
||||
enum fan53555_pmic_type {
|
||||
FAN53555 = 1,
|
||||
SYR827,
|
||||
SYR828,
|
||||
};
|
||||
|
||||
static struct ofw_compat_data compat_data[] = {
|
||||
{"fcs,fan53555", FAN53555},
|
||||
{"silergy,syr827", SYR827},
|
||||
{"silergy,syr828", SYR828},
|
||||
{NULL, 0}
|
||||
};
|
||||
|
||||
struct fan53555_reg_sc {
|
||||
struct regnode *regnode;
|
||||
char *name;
|
||||
device_t base_dev;
|
||||
uint8_t live_reg;
|
||||
uint8_t sleep_reg;
|
||||
struct regulator_range *range;
|
||||
struct regnode_std_param *param;
|
||||
};
|
||||
|
||||
struct fan53555_softc {
|
||||
device_t dev;
|
||||
uint8_t live_reg;
|
||||
uint8_t sleep_reg;
|
||||
};
|
||||
|
||||
static struct regulator_range syr_8_range =
|
||||
REG_RANGE_INIT( 0, 0x3F, 712500, 12500);
|
||||
|
||||
static struct regulator_range fan_0_0_range =
|
||||
REG_RANGE_INIT( 0, 0x3F, 600000, 10000);
|
||||
static struct regulator_range fan_0_13_range =
|
||||
REG_RANGE_INIT( 0, 0x3F, 800000, 10000);
|
||||
static struct regulator_range fan_1_range =
|
||||
REG_RANGE_INIT( 0, 0x3F, 600000, 10000);
|
||||
static struct regulator_range fan_4_range =
|
||||
REG_RANGE_INIT( 0, 0x3F, 603000, 12826);
|
||||
|
||||
|
||||
static int
|
||||
fan53555_read(device_t dev, uint8_t reg, uint8_t *val)
|
||||
{
|
||||
uint8_t addr;
|
||||
int rv;
|
||||
struct iic_msg msgs[2] = {
|
||||
{0, IIC_M_WR | IIC_M_NOSTOP, 1, &addr},
|
||||
{0, IIC_M_RD, 1, val},
|
||||
};
|
||||
|
||||
msgs[0].slave = iicbus_get_addr(dev);
|
||||
msgs[1].slave = iicbus_get_addr(dev);
|
||||
addr = reg;
|
||||
|
||||
rv = iicbus_transfer_excl(dev, msgs, 2, IIC_INTRWAIT);
|
||||
if (rv != 0) {
|
||||
device_printf(dev, "Error when reading reg 0x%02X, rv: %d\n",
|
||||
reg, rv);
|
||||
return (EIO);
|
||||
}
|
||||
|
||||
return (0);
|
||||
}
|
||||
|
||||
static int
|
||||
fan53555_write(device_t dev, uint8_t reg, uint8_t val)
|
||||
{
|
||||
uint8_t data[2];
|
||||
int rv;
|
||||
|
||||
struct iic_msg msgs[1] = {
|
||||
{0, IIC_M_WR, 2, data},
|
||||
};
|
||||
|
||||
msgs[0].slave = iicbus_get_addr(dev);
|
||||
data[0] = reg;
|
||||
data[1] = val;
|
||||
|
||||
rv = iicbus_transfer_excl(dev, msgs, 1, IIC_INTRWAIT);
|
||||
if (rv != 0) {
|
||||
device_printf(dev,
|
||||
"Error when writing reg 0x%02X, rv: %d\n", reg, rv);
|
||||
return (EIO);
|
||||
}
|
||||
return (0);
|
||||
}
|
||||
|
||||
static int
|
||||
fan53555_read_sel(struct fan53555_reg_sc *sc, uint8_t *sel)
|
||||
{
|
||||
int rv;
|
||||
|
||||
rv = fan53555_read(sc->base_dev, sc->live_reg, sel);
|
||||
if (rv != 0)
|
||||
return (rv);
|
||||
*sel &= FAN53555_VSEL_MASK;
|
||||
return (0);
|
||||
}
|
||||
|
||||
static int
|
||||
fan53555_write_sel(struct fan53555_reg_sc *sc, uint8_t sel)
|
||||
{
|
||||
int rv;
|
||||
uint8_t reg;
|
||||
|
||||
rv = fan53555_read(sc->base_dev, sc->live_reg, ®);
|
||||
if (rv != 0)
|
||||
return (rv);
|
||||
reg &= ~FAN53555_VSEL_MASK;
|
||||
reg |= sel;
|
||||
|
||||
rv = fan53555_write(sc->base_dev, sc->live_reg, reg);
|
||||
if (rv != 0)
|
||||
return (rv);
|
||||
return (rv);
|
||||
}
|
||||
|
||||
static int
|
||||
fan53555_regnode_init(struct regnode *regnode)
|
||||
{
|
||||
return (0);
|
||||
}
|
||||
|
||||
static int
|
||||
fan53555_regnode_enable(struct regnode *regnode, bool enable, int *udelay)
|
||||
{
|
||||
struct fan53555_reg_sc *sc;
|
||||
uint8_t val;
|
||||
|
||||
sc = regnode_get_softc(regnode);
|
||||
|
||||
dprintf(sc, "%sabling regulator %s\n", enable ? "En" : "Dis",
|
||||
sc->name);
|
||||
fan53555_read(sc->base_dev, sc->live_reg, &val);
|
||||
if (enable)
|
||||
val |=FAN53555_VSEL_ENA;
|
||||
else
|
||||
val &= ~FAN53555_VSEL_ENA;
|
||||
fan53555_write(sc->base_dev, sc->live_reg, val);
|
||||
|
||||
*udelay = sc->param->enable_delay;
|
||||
return (0);
|
||||
}
|
||||
|
||||
|
||||
static int
|
||||
fan53555_regnode_set_voltage(struct regnode *regnode, int min_uvolt,
|
||||
int max_uvolt, int *udelay)
|
||||
{
|
||||
struct fan53555_reg_sc *sc;
|
||||
uint8_t sel;
|
||||
int uvolt, rv;
|
||||
|
||||
sc = regnode_get_softc(regnode);
|
||||
|
||||
dprintf(sc, "Setting %s to %d<->%d uvolts\n", sc->name, min_uvolt,
|
||||
max_uvolt);
|
||||
rv = regulator_range_volt_to_sel8(sc->range, 1, min_uvolt, max_uvolt,
|
||||
&sel);
|
||||
if (rv != 0)
|
||||
return (rv);
|
||||
*udelay = sc->param->ramp_delay;
|
||||
rv = fan53555_write_sel(sc, sel);
|
||||
dprintf(sc, "Regulator %s writing sel: 0x%02X\n", sc->name, sel);
|
||||
|
||||
fan53555_read_sel(sc, &sel);
|
||||
regulator_range_sel8_to_volt(sc->range, 1, sel, &uvolt);
|
||||
dprintf(sc, "Regulator %s set to %d uvolt (sel: 0x%02X)\n", sc->name,
|
||||
uvolt, sel);
|
||||
|
||||
return (rv);
|
||||
}
|
||||
|
||||
static int
|
||||
fan53555_regnode_get_voltage(struct regnode *regnode, int *uvolt)
|
||||
{
|
||||
struct fan53555_reg_sc *sc;
|
||||
uint8_t sel;
|
||||
int rv;
|
||||
|
||||
sc = regnode_get_softc(regnode);
|
||||
|
||||
rv = fan53555_read_sel(sc, &sel);
|
||||
if (rv != 0)
|
||||
return (rv);
|
||||
rv = regulator_range_sel8_to_volt(sc->range, 1, sel, uvolt);
|
||||
dprintf(sc, "Regulator %s is at %d uvolt ((sel: 0x%02X)\n", sc->name,
|
||||
*uvolt, sel);
|
||||
|
||||
return (rv);
|
||||
}
|
||||
|
||||
static regnode_method_t fan53555_regnode_methods[] = {
|
||||
/* Regulator interface */
|
||||
REGNODEMETHOD(regnode_init, fan53555_regnode_init),
|
||||
REGNODEMETHOD(regnode_enable, fan53555_regnode_enable),
|
||||
REGNODEMETHOD(regnode_set_voltage, fan53555_regnode_set_voltage),
|
||||
REGNODEMETHOD(regnode_get_voltage, fan53555_regnode_get_voltage),
|
||||
REGNODEMETHOD_END
|
||||
};
|
||||
DEFINE_CLASS_1(fan53555_regnode, fan53555_regnode_class,
|
||||
fan53555_regnode_methods, sizeof(struct fan53555_reg_sc), regnode_class);
|
||||
|
||||
static struct regulator_range *
|
||||
fan53555_get_range(struct fan53555_softc *sc, int type, uint8_t id,
|
||||
uint8_t rev)
|
||||
{
|
||||
if (type == SYR827 || type == SYR828) {
|
||||
switch (id) {
|
||||
case 8:
|
||||
return (&syr_8_range);
|
||||
default:
|
||||
return (NULL);
|
||||
}
|
||||
}
|
||||
|
||||
if (type == FAN53555) {
|
||||
switch (id) {
|
||||
case 0:
|
||||
if (rev == 0)
|
||||
return (&fan_0_0_range);
|
||||
else if (rev == 13)
|
||||
return (&fan_0_13_range);
|
||||
else
|
||||
return (NULL);
|
||||
case 1:
|
||||
case 3:
|
||||
case 5:
|
||||
case 8:
|
||||
return (&fan_1_range);
|
||||
case 4:
|
||||
return (&fan_4_range);
|
||||
default:
|
||||
return (NULL);
|
||||
}
|
||||
}
|
||||
|
||||
return (NULL);
|
||||
}
|
||||
|
||||
static struct fan53555_reg_sc *
|
||||
fan53555_reg_attach(struct fan53555_softc *sc, phandle_t node, int type)
|
||||
{
|
||||
struct fan53555_reg_sc *reg_sc;
|
||||
struct regnode_init_def initdef;
|
||||
struct regnode *regnode;
|
||||
static struct regulator_range *range;
|
||||
uint8_t id1, id2;
|
||||
|
||||
memset(&initdef, 0, sizeof(initdef));
|
||||
if (regulator_parse_ofw_stdparam(sc->dev, node, &initdef) != 0) {
|
||||
device_printf(sc->dev, "cannot parse regulator FDT data\n");
|
||||
return (NULL);
|
||||
}
|
||||
|
||||
if (fan53555_read(sc->dev, FAN53555_ID1, &id1) != 0) {
|
||||
device_printf(sc->dev, "cannot read ID1\n");
|
||||
return (NULL);
|
||||
}
|
||||
|
||||
if (fan53555_read(sc->dev, FAN53555_ID2, &id2) != 0) {
|
||||
device_printf(sc->dev, "cannot read ID2\n");
|
||||
return (NULL);
|
||||
}
|
||||
dprintf(sc, "Device ID1: 0x%02X, ID2: 0x%02X\n", id1, id2);
|
||||
|
||||
range = fan53555_get_range(sc, type, FAN53555_ID1_DIE_ID(id1),
|
||||
FAN53555_ID2_DIE_REV(id2));
|
||||
if (range == NULL) {
|
||||
device_printf(sc->dev,
|
||||
"cannot determine chip type (ID1: 0x%02X, ID2: 0x%02X)\n",
|
||||
id1, id2);
|
||||
return (NULL);
|
||||
}
|
||||
|
||||
initdef.id = 1;
|
||||
initdef.ofw_node = node;
|
||||
|
||||
regnode = regnode_create(sc->dev, &fan53555_regnode_class, &initdef);
|
||||
if (regnode == NULL) {
|
||||
device_printf(sc->dev, "cannot create regulator\n");
|
||||
return (NULL);
|
||||
}
|
||||
|
||||
reg_sc = regnode_get_softc(regnode);
|
||||
reg_sc->name = "fan53555";
|
||||
reg_sc->regnode = regnode;
|
||||
reg_sc->base_dev = sc->dev;
|
||||
reg_sc->param = regnode_get_stdparam(regnode);
|
||||
reg_sc->range = range;
|
||||
reg_sc->live_reg = sc->live_reg;
|
||||
reg_sc->sleep_reg = sc->sleep_reg;
|
||||
|
||||
dprintf(sc->dev, "live_reg: %d, sleep_reg: %d\n", reg_sc->live_reg,
|
||||
reg_sc->sleep_reg);
|
||||
|
||||
regnode_register(regnode);
|
||||
|
||||
if (bootverbose) {
|
||||
int volt, rv;
|
||||
regnode_topo_slock();
|
||||
rv = regnode_get_voltage(regnode, &volt);
|
||||
if (rv == ENODEV) {
|
||||
device_printf(sc->dev,
|
||||
" Regulator %s: parent doesn't exist yet.\n",
|
||||
regnode_get_name(regnode));
|
||||
} else if (rv != 0) {
|
||||
device_printf(sc->dev,
|
||||
" Regulator %s: voltage: INVALID!!!\n",
|
||||
regnode_get_name(regnode));
|
||||
} else {
|
||||
device_printf(sc->dev,
|
||||
" Regulator %s: voltage: %d uV\n",
|
||||
regnode_get_name(regnode), volt);
|
||||
}
|
||||
regnode_topo_unlock();
|
||||
}
|
||||
|
||||
return (reg_sc);
|
||||
}
|
||||
|
||||
static int
|
||||
fan53555_probe(device_t dev)
|
||||
{
|
||||
int type;
|
||||
|
||||
if (!ofw_bus_status_okay(dev))
|
||||
return (ENXIO);
|
||||
|
||||
type = ofw_bus_search_compatible(dev, compat_data)->ocd_data;
|
||||
switch (type) {
|
||||
case FAN53555:
|
||||
device_set_desc(dev, "FAN53555 PMIC");
|
||||
break;
|
||||
case SYR827:
|
||||
device_set_desc(dev, "SYR827 PMIC");
|
||||
break;
|
||||
case SYR828:
|
||||
device_set_desc(dev, "SYR828 PMIC");
|
||||
break;
|
||||
default:
|
||||
return (ENXIO);
|
||||
}
|
||||
|
||||
return (BUS_PROBE_DEFAULT);
|
||||
}
|
||||
|
||||
static int
|
||||
fan53555_attach(device_t dev)
|
||||
{
|
||||
struct fan53555_softc *sc;
|
||||
phandle_t node;
|
||||
int type, susp_sel, rv;
|
||||
|
||||
sc = device_get_softc(dev);
|
||||
sc->dev = dev;
|
||||
node = ofw_bus_get_node(dev);
|
||||
type = ofw_bus_search_compatible(dev, compat_data)->ocd_data;
|
||||
|
||||
rv = OF_getencprop(node, "fcs,suspend-voltage-selector", &susp_sel,
|
||||
sizeof(susp_sel));
|
||||
if (rv <= 0)
|
||||
susp_sel = 1;
|
||||
if (susp_sel == 1) {
|
||||
sc->live_reg = FAN53555_VSEL0;
|
||||
sc->sleep_reg = FAN53555_VSEL1;
|
||||
} else {
|
||||
sc->live_reg = FAN53555_VSEL1;
|
||||
sc->sleep_reg = FAN53555_VSEL0;
|
||||
}
|
||||
if (fan53555_reg_attach(sc, node, type) == NULL)
|
||||
device_printf(dev, "cannot attach regulator.\n");
|
||||
|
||||
return (0);
|
||||
}
|
||||
|
||||
static int
|
||||
fan53555_detach(device_t dev)
|
||||
{
|
||||
|
||||
/* We cannot detach regulators */
|
||||
return (EBUSY);
|
||||
}
|
||||
|
||||
static device_method_t fan53555_methods[] = {
|
||||
DEVMETHOD(device_probe, fan53555_probe),
|
||||
DEVMETHOD(device_attach, fan53555_attach),
|
||||
DEVMETHOD(device_detach, fan53555_detach),
|
||||
|
||||
/* Regdev interface */
|
||||
DEVMETHOD(regdev_map, regdev_default_ofw_map),
|
||||
|
||||
DEVMETHOD_END
|
||||
};
|
||||
|
||||
static devclass_t fan53555_devclass;
|
||||
static DEFINE_CLASS_0(fan53555_pmic, fan53555_driver, fan53555_methods,
|
||||
sizeof(struct fan53555_softc));
|
||||
|
||||
EARLY_DRIVER_MODULE(fan53555, iicbus, fan53555_driver, fan53555_devclass, 0, 0,
|
||||
BUS_PASS_RESOURCE);
|
||||
MODULE_VERSION(fan53555, 1);
|
||||
MODULE_DEPEND(fan53555, iicbus, IICBUS_MINVER, IICBUS_PREFVER, IICBUS_MAXVER);
|
||||
IICBUS_FDT_PNP_INFO(compat_data);
|
||||
Loading…
Reference in a new issue