From bc5c7a1ad390e71b56b9655bd9a14abf4e109a49 Mon Sep 17 00:00:00 2001 From: Ian Lepore Date: Fri, 1 Nov 2013 02:04:05 +0000 Subject: [PATCH] Kernel config for Wandboard. --- sys/arm/conf/WANDBOARD-COMMON | 155 ++++++++++++++++++++++++++++++++++ sys/arm/conf/WANDBOARD-DUAL | 27 ++++++ sys/arm/conf/WANDBOARD-QUAD | 27 ++++++ sys/arm/conf/WANDBOARD-SOLO | 27 ++++++ 4 files changed, 236 insertions(+) create mode 100644 sys/arm/conf/WANDBOARD-COMMON create mode 100644 sys/arm/conf/WANDBOARD-DUAL create mode 100644 sys/arm/conf/WANDBOARD-QUAD create mode 100644 sys/arm/conf/WANDBOARD-SOLO diff --git a/sys/arm/conf/WANDBOARD-COMMON b/sys/arm/conf/WANDBOARD-COMMON new file mode 100644 index 00000000000..c63ef85cba2 --- /dev/null +++ b/sys/arm/conf/WANDBOARD-COMMON @@ -0,0 +1,155 @@ +# Kernel configuration for Wandboard +# +# For more information on this file, please read the config(5) manual page, +# and/or the handbook section on Kernel Configuration Files: +# +# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html +# +# The handbook is also available locally in /usr/share/doc/handbook +# if you've installed the doc distribution, otherwise always see the +# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the +# latest information. +# +# An exhaustive list of options and more detailed explanations of the +# device lines is also present in the ../../conf/NOTES and NOTES files. +# If you are in doubt as to the purpose or necessity of a line, check first +# in NOTES. +# +# $FreeBSD$ + +include "../freescale/imx/std.imx6" + +options HZ=250 # Scheduling quantum is 4 milliseconds. +options SCHED_4BSD # 4BSD scheduler +options PREEMPTION # Enable kernel thread preemption +options INET # InterNETworking +options INET6 # IPv6 communications protocols +#options SCTP # Stream Control Transmission Protocol +options FFS # Berkeley Fast Filesystem +options SOFTUPDATES # Enable FFS soft updates support +options UFS_ACL # Support for access control lists +options UFS_DIRHASH # Improve performance on big directories +options UFS_GJOURNAL # Enable gjournal-based UFS journaling +#options MD_ROOT # MD is a potential root device +options NFSCL # New Network Filesystem Client +#options NFSD # New Network Filesystem Server +options NFSLOCKD # Network Lock Manager +options NFS_ROOT # NFS usable as /, requires NFSCL +options MSDOSFS # MSDOS Filesystem +options CD9660 # ISO 9660 Filesystem +#options PROCFS # Process filesystem (requires PSEUDOFS) +options PSEUDOFS # Pseudo-filesystem framework +options TMPFS # TMP Memory Filesystem +options GEOM_PART_GPT # GUID Partition Tables. +options GEOM_LABEL # Provides labelization +options KTRACE # ktrace(1) support +options SYSVSHM # SYSV-style shared memory +options SYSVMSG # SYSV-style message queues +options SYSVSEM # SYSV-style semaphores +options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions +options INCLUDE_CONFIG_FILE # Include this file in kernel + +# Debugging support. Always need this: +options KDB # Enable kernel debugger support. +# For minimum debugger support use KDB_TRACE, for interactive use DDB. +#options KDB_TRACE # Print a stack trace for a panic. +options DDB # Support DDB. +# For full debugger support use this instead: +#options GDB # Support remote GDB. +# Other debugging options... +makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols +options ALT_BREAK_TO_DEBUGGER # Use to enter debugger. +#options DEBUG +#options DEADLKRES # Enable the deadlock resolver +#options INVARIANTS # Enable calls of extra sanity checking +#options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS +#options WITNESS # Enable checks to detect deadlocks and cycles + +# Note that 'bpf' is required for DHCP. +device bpf # Berkeley packet filter + +# Pseudo devices. +device loop # Network loopback +device random # Entropy device +device vlan # 802.1Q VLAN support +device tun # Packet tunnel. +device md # Memory "disks" +#device gif # IPv6 and IPv4 tunneling +#device faith # IPv6-to-IPv4 relaying (translation) +#device firmware # firmware assist module +device ether # Ethernet support +device miibus # Required for ethernet + +# Serial (COM) ports +device uart # Multi-uart driver + +#device iomux # IO Multiplexor + +# SCSI peripherals +device scbus # SCSI bus (required for SCSI) +device da # Direct Access (disks) +device cd # CD +device pass # Passthrough device (direct SCSI access) + +# USB support +#options USB_DEBUG # enable debug msgs +options USB_HOST_ALIGN=32 # Required for ARM, set to cache line size. +device ehci # OHCI USB interface +device usb # USB Bus (required) +device umass # Disks/Mass storage - Requires scbus and da +device uhid # "Human Interface Devices" +device u3g # USB modems + +# USB Ethernet, requires miibus +#device aue # ADMtek USB Ethernet +#device axe # ASIX Electronics USB Ethernet +#device cdce # Generic USB over Ethernet +#device cue # CATC USB Ethernet +#device kue # Kawasaki LSI USB Ethernet +#device rue # RealTek RTL8150 USB Ethernet +#device udav # Davicom DM9601E USB + +# USB Wireless +#device rum # Ralink Technology RT2501USB wireless NICs + +# Watchdog timer. +# WARNING: can't be disabled!!! +#device imxwdt # Watchdog + +# Wireless NIC cards +#device wlan # 802.11 support +#device wlan_wep # 802.11 WEP support +#device wlan_ccmp # 802.11 CCMP support +#device wlan_tkip # 802.11 TKIP support +#device wlan_amrr # AMRR transmit rate control algorithm + +# NOTE: serial console will be disabled if syscons enabled +# Uncomment following lines for framebuffer/syscons support +# Wandboard has no video console support yet. +#device sc +#device kbdmux +#options SC_DFLT_FONT # compile font in +#makeoptions SC_DFLT_FONT=cp437 +#device ukbd # Allow keyboard like HIDs to control console +#device ums + +# required for netbooting +#options BOOTP +#options BOOTP_COMPAT +#options BOOTP_NFSROOT +#options BOOTP_NFSV3 +#options BOOTP_WIRED_TO=ffec0 + +# U-Boot stuff lives on slice 1, FreeBSD on slice 2. +options ROOTDEVNAME=\"ufs:mmcsd0s2a\" + +#device fsliic # Freescale i2c/iic (not ready yet) +#device iic # iic protocol +#device iicbus # iic bus + +device sdhci # SD controller +device mmc # SD/MMC protocol +device mmcsd # SDCard disk device + +device ffec # Freescale Fast Ethernet Controller + diff --git a/sys/arm/conf/WANDBOARD-DUAL b/sys/arm/conf/WANDBOARD-DUAL new file mode 100644 index 00000000000..0577dafbe46 --- /dev/null +++ b/sys/arm/conf/WANDBOARD-DUAL @@ -0,0 +1,27 @@ +# Kernel configuration for Wandboard-Dual +# +# For more information on this file, please read the config(5) manual page, +# and/or the handbook section on Kernel Configuration Files: +# +# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html +# +# The handbook is also available locally in /usr/share/doc/handbook +# if you've installed the doc distribution, otherwise always see the +# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the +# latest information. +# +# An exhaustive list of options and more detailed explanations of the +# device lines is also present in the ../../conf/NOTES and NOTES files. +# If you are in doubt as to the purpose or necessity of a line, check first +# in NOTES. +# +# $FreeBSD$ + +include WANDBOARD-COMMON +ident WANDBOARD-DUAL + +# Flattened Device Tree +options FDT +options FDT_DTB_STATIC +makeoptions FDT_DTS_FILE=wandboard-dual.dts + diff --git a/sys/arm/conf/WANDBOARD-QUAD b/sys/arm/conf/WANDBOARD-QUAD new file mode 100644 index 00000000000..66381ea872c --- /dev/null +++ b/sys/arm/conf/WANDBOARD-QUAD @@ -0,0 +1,27 @@ +# Kernel configuration for Wandboard-Quad +# +# For more information on this file, please read the config(5) manual page, +# and/or the handbook section on Kernel Configuration Files: +# +# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html +# +# The handbook is also available locally in /usr/share/doc/handbook +# if you've installed the doc distribution, otherwise always see the +# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the +# latest information. +# +# An exhaustive list of options and more detailed explanations of the +# device lines is also present in the ../../conf/NOTES and NOTES files. +# If you are in doubt as to the purpose or necessity of a line, check first +# in NOTES. +# +# $FreeBSD$ + +include WANDBOARD-COMMON +ident WANDBOARD-QUAD + +# Flattened Device Tree +options FDT +options FDT_DTB_STATIC +makeoptions FDT_DTS_FILE=wandboard-quad.dts + diff --git a/sys/arm/conf/WANDBOARD-SOLO b/sys/arm/conf/WANDBOARD-SOLO new file mode 100644 index 00000000000..ca2ef41ac6f --- /dev/null +++ b/sys/arm/conf/WANDBOARD-SOLO @@ -0,0 +1,27 @@ +# Kernel configuration for Wandboard-Solo +# +# For more information on this file, please read the config(5) manual page, +# and/or the handbook section on Kernel Configuration Files: +# +# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html +# +# The handbook is also available locally in /usr/share/doc/handbook +# if you've installed the doc distribution, otherwise always see the +# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the +# latest information. +# +# An exhaustive list of options and more detailed explanations of the +# device lines is also present in the ../../conf/NOTES and NOTES files. +# If you are in doubt as to the purpose or necessity of a line, check first +# in NOTES. +# +# $FreeBSD$ + +include WANDBOARD-COMMON +ident WANDBOARD-SOLO + +# Flattened Device Tree +options FDT +options FDT_DTB_STATIC +makeoptions FDT_DTS_FILE=wandboard-solo.dts +