Move mfiutil.1 to mfiutil.8 for consistency. Remove superfulous README.

Approved by:	re

usr.sbin/mfiutil/Makefile

@@ -3,6 +3,7 @@ PROG=	mfiutil
 
 SRCS=	mfiutil.c mfi_cmd.c mfi_config.c mfi_drive.c mfi_evt.c mfi_flash.c \
 	mfi_patrol.c mfi_show.c mfi_volume.c
+MAN8=	mfiutil.8
 
 CFLAGS+= -fno-builtin-strftime
 WARNS?=3

usr.sbin/mfiutil/README

@@ -1,104 +0,0 @@
-# $FreeBSD$
-
-This package includes a mfiutil command for administering mfi(4) controllers
-on FreeBSD.
-
-Version 1.0.13
-	* Cleaned up warnings in preparation for integration with FreeBSD
-
-Version 1.0.12
-	* Add 'drive clear' command to wipe drives with all 0x00 characters
-
-Version 1.0.11
-	* Display serial number for drives
-	* Display location info for drives with 'show config'
-
-Version 1.0.10
-	* Display min and max stripe size supported by adapters.
-	* Added support for examining the controller event log.
-
-Version 1.0.9
-	* Display stripe size for volumes.
-	* Added support for setting the stripe size for new volumes.
-	* Fix a regression in 1.0.8 that broke creation of RAID-5 and RAID-50
-	  arrays.
-
-Version 1.0.8
-	* Added support for RAID-60 arrays.
-	* Added 'flash' command to support firmware flashing.
-
-Version 1.0.7
-	* Renamed 'clear config' to 'clear, 'create volume' to 'create',
-	  'delete volume' to 'delete', 'create spare' to 'add', and
-	  'delete spare' to 'remove'.  The old names still work.
-	* Added support for RAID-6 arrays.
-
-Version 1.0.6
-	* Added 'show patrol', 'patrol', 'start patrol', and 'stop patrol'
-	  commands to manage patrol reads.
-
-Version 1.0.5
-	* Added 'create volume' and 'delete volume' commands to manage volumes.
-	* Added 'clear config' command to clear entire configuration.
-	* Added more detailed error reporting based on firmware status codes.
-	* Renamed 'progress' command to 'drive progress'.
-	* Added 'volume progress' command to display progress of volume-level
-	  activites such as background inits.
-	* Fixed 'create spare' to properly add global spares.
-
-Version 1.0.4
-	* Added 'create spare' and 'delete spare' commands to manage hot spares.
-	* Added 'good' command to mark unconfigured bad drives as good.
-	* Display more information about hot spares in 'show config'
-	* Allow physical drives to be specified via Exx:Syy similar to megacli
-	* Display onboard memory size in 'show adapter'
-
-Version 1.0.3
-	* Added 'cache' command to manage cache settings for volumes.
-	* Added 'name' command to name volumes.
-	* Added manpage.
-
-Version 1.0.2
-	* Added 'show adapter' and 'show battery' commands.
-	* Added RAID level of volumes to 'show config' and 'show volumes'.
-	* Added drive model info to 'show config' and 'show drives'.
-	* Added package firmware version to 'show firmware'.
-	* Added read and write cache status to 'show volumes'.
-	* Map volume IDs to mfidX device names on newer kernels.
-
-Version 1.0.1
-	* Added 'show firmware' command
-
-Version 1.0.0
-	* Initial release
-
-usage: mfiutil [-u unit] <command> ...
-
-Commands include:
-    version
-    show adapter              - display controller information
-    show battery              - display battery information
-    show config               - display RAID configuration
-    show drives               - list physical drives
-    show firmware             - list firmware images
-    show volumes              - list logical volumes
-    show patrol               - display patrol read status
-    fail <drive>              - fail a physical drive
-    good <drive>              - mark a bad physical drive as good
-    rebuild <drive>           - mark failed drive ready for rebuild
-    drive progress <drive>    - display status of active operations
-    start rebuild <drive>
-    abort rebuild <drive>
-    locate <drive> <on|off>   - toggle drive LED
-    cache <volume> [command [setting]]
-    name <volume> <name>
-    volume progress <volume>  - display status of active operations
-    clear                     - clear volume configuration
-    create <type> [-v] <drive>[,<drive>[,...]] [<drive>[,<drive>[,...]]
-    delete <volume>
-    add <drive> [volume]      - add a hot spare
-    remove <drive>            - remove a hot spare
-    patrol <disable|auto|manual> [interval [start]]
-    start patrol              - start a patrol read
-    stop patrol               - stop a patrol read
-    flash <firmware>