mirror of
https://github.com/opnsense/src.git
synced 2026-05-28 04:12:45 -04:00
Eliminate ic_myaddr so changing the mac address of a device works correctly:
o remove ic_myaddr from ieee80211com o change ieee80211_ifattach to take the mac address of the physical device and use that to setup the lladdr. o replace all references to ic_myaddr in drivers by IF_LLADDR o related cleanups (e.g. kill dead code) PR: kern/133178 Reviewed by: thompsa, rpaulo
This commit is contained in:
Sam Leffler
parent
bc42149220
commit
29aca94080
17 changed files with 84 additions and 125 deletions
|
|
@ -353,6 +353,7 @@ ath_attach(u_int16_t devid, struct ath_softc *sc)
|
|||
HAL_STATUS status;
|
||||
int error = 0, i;
|
||||
u_int wmodes;
|
||||
uint8_t macaddr[IEEE80211_ADDR_LEN];
|
||||
|
||||
DPRINTF(sc, ATH_DEBUG_ANY, "%s: devid 0x%x\n", __func__, devid);
|
||||
|
||||
|
|
@ -681,14 +682,14 @@ ath_attach(u_int16_t devid, struct ath_softc *sc)
|
|||
sc->sc_hasveol = ath_hal_hasveol(ah);
|
||||
|
||||
/* get mac address from hardware */
|
||||
ath_hal_getmac(ah, ic->ic_myaddr);
|
||||
ath_hal_getmac(ah, macaddr);
|
||||
if (sc->sc_hasbmask)
|
||||
ath_hal_getbssidmask(ah, sc->sc_hwbssidmask);
|
||||
|
||||
/* NB: used to size node table key mapping array */
|
||||
ic->ic_max_keyix = sc->sc_keymax;
|
||||
/* call MI attach routine. */
|
||||
ieee80211_ifattach(ic);
|
||||
ieee80211_ifattach(ic, macaddr);
|
||||
ic->ic_setregdomain = ath_setregdomain;
|
||||
ic->ic_getradiocaps = ath_getradiocaps;
|
||||
sc->sc_opmode = HAL_M_STA;
|
||||
|
|
@ -2755,7 +2756,6 @@ static void
|
|||
ath_mode_init(struct ath_softc *sc)
|
||||
{
|
||||
struct ifnet *ifp = sc->sc_ifp;
|
||||
struct ieee80211com *ic = ifp->if_l2com;
|
||||
struct ath_hal *ah = sc->sc_ah;
|
||||
u_int32_t rfilt;
|
||||
|
||||
|
|
@ -2766,16 +2766,8 @@ ath_mode_init(struct ath_softc *sc)
|
|||
/* configure operational mode */
|
||||
ath_hal_setopmode(ah);
|
||||
|
||||
/*
|
||||
* Handle any link-level address change. Note that we only
|
||||
* need to force ic_myaddr; any other addresses are handled
|
||||
* as a byproduct of the ifnet code marking the interface
|
||||
* down then up.
|
||||
*
|
||||
* XXX should get from lladdr instead of arpcom but that's more work
|
||||
*/
|
||||
IEEE80211_ADDR_COPY(ic->ic_myaddr, IF_LLADDR(ifp));
|
||||
ath_hal_setmac(ah, ic->ic_myaddr);
|
||||
/* handle any link-level address change */
|
||||
ath_hal_setmac(ah, IF_LLADDR(ifp));
|
||||
|
||||
/* calculate and install multicast filter */
|
||||
ath_update_mcast(ifp);
|
||||
|
|
|
|||
|
|
@ -937,8 +937,7 @@ got_crypto:
|
|||
if (r == 0)
|
||||
ic->ic_caps |= IEEE80211_C_TXPMGT;
|
||||
|
||||
bcopy(eaddr, &ic->ic_myaddr, sizeof(eaddr));
|
||||
ieee80211_ifattach(ic);
|
||||
ieee80211_ifattach(ic, eaddr);
|
||||
ic->ic_raw_xmit = ndis_raw_xmit;
|
||||
ic->ic_scan_start = ndis_scan_start;
|
||||
ic->ic_scan_end = ndis_scan_end;
|
||||
|
|
@ -2408,7 +2407,7 @@ ndis_setstate_80211(sc)
|
|||
|
||||
/* Set the BSSID to our value so the driver doesn't associate */
|
||||
len = IEEE80211_ADDR_LEN;
|
||||
bcopy(ic->ic_myaddr, bssid, len);
|
||||
bcopy(IF_LLADDR(ifp), bssid, len);
|
||||
DPRINTF(("Setting BSSID to %6D\n", (uint8_t *)&bssid, ":"));
|
||||
rval = ndis_set_info(sc, OID_802_11_BSSID, &bssid, &len);
|
||||
if (rval)
|
||||
|
|
|
|||
|
|
@ -231,6 +231,7 @@ ipw_attach(device_t dev)
|
|||
struct ieee80211_channel *c;
|
||||
uint16_t val;
|
||||
int error, i;
|
||||
uint8_t macaddr[IEEE80211_ADDR_LEN];
|
||||
|
||||
sc->sc_dev = dev;
|
||||
|
||||
|
|
@ -315,14 +316,14 @@ ipw_attach(device_t dev)
|
|||
|
||||
/* read MAC address from EEPROM */
|
||||
val = ipw_read_prom_word(sc, IPW_EEPROM_MAC + 0);
|
||||
ic->ic_myaddr[0] = val >> 8;
|
||||
ic->ic_myaddr[1] = val & 0xff;
|
||||
macaddr[0] = val >> 8;
|
||||
macaddr[1] = val & 0xff;
|
||||
val = ipw_read_prom_word(sc, IPW_EEPROM_MAC + 1);
|
||||
ic->ic_myaddr[2] = val >> 8;
|
||||
ic->ic_myaddr[3] = val & 0xff;
|
||||
macaddr[2] = val >> 8;
|
||||
macaddr[3] = val & 0xff;
|
||||
val = ipw_read_prom_word(sc, IPW_EEPROM_MAC + 2);
|
||||
ic->ic_myaddr[4] = val >> 8;
|
||||
ic->ic_myaddr[5] = val & 0xff;
|
||||
macaddr[4] = val >> 8;
|
||||
macaddr[5] = val & 0xff;
|
||||
|
||||
/* set supported .11b channels (read from EEPROM) */
|
||||
if ((val = ipw_read_prom_word(sc, IPW_EEPROM_CHANNEL_LIST)) == 0)
|
||||
|
|
@ -341,7 +342,7 @@ ipw_attach(device_t dev)
|
|||
if (!(ipw_read_prom_word(sc, IPW_EEPROM_RADIO) & 8))
|
||||
sc->flags |= IPW_FLAG_HAS_RADIO_SWITCH;
|
||||
|
||||
ieee80211_ifattach(ic);
|
||||
ieee80211_ifattach(ic, macaddr);
|
||||
ic->ic_scan_start = ipw_scan_start;
|
||||
ic->ic_scan_end = ipw_scan_end;
|
||||
ic->ic_set_channel = ipw_set_channel;
|
||||
|
|
|
|||
|
|
@ -280,6 +280,7 @@ iwi_attach(device_t dev)
|
|||
uint16_t val;
|
||||
int i, error;
|
||||
uint8_t bands;
|
||||
uint8_t macaddr[IEEE80211_ADDR_LEN];
|
||||
|
||||
sc->sc_dev = dev;
|
||||
|
||||
|
|
@ -403,14 +404,14 @@ iwi_attach(device_t dev)
|
|||
|
||||
/* read MAC address from EEPROM */
|
||||
val = iwi_read_prom_word(sc, IWI_EEPROM_MAC + 0);
|
||||
ic->ic_myaddr[0] = val & 0xff;
|
||||
ic->ic_myaddr[1] = val >> 8;
|
||||
macaddr[0] = val & 0xff;
|
||||
macaddr[1] = val >> 8;
|
||||
val = iwi_read_prom_word(sc, IWI_EEPROM_MAC + 1);
|
||||
ic->ic_myaddr[2] = val & 0xff;
|
||||
ic->ic_myaddr[3] = val >> 8;
|
||||
macaddr[2] = val & 0xff;
|
||||
macaddr[3] = val >> 8;
|
||||
val = iwi_read_prom_word(sc, IWI_EEPROM_MAC + 2);
|
||||
ic->ic_myaddr[4] = val & 0xff;
|
||||
ic->ic_myaddr[5] = val >> 8;
|
||||
macaddr[4] = val & 0xff;
|
||||
macaddr[5] = val >> 8;
|
||||
|
||||
bands = 0;
|
||||
setbit(&bands, IEEE80211_MODE_11B);
|
||||
|
|
@ -419,7 +420,7 @@ iwi_attach(device_t dev)
|
|||
setbit(&bands, IEEE80211_MODE_11A);
|
||||
ieee80211_init_channels(ic, NULL, &bands);
|
||||
|
||||
ieee80211_ifattach(ic);
|
||||
ieee80211_ifattach(ic, macaddr);
|
||||
/* override default methods */
|
||||
ic->ic_node_alloc = iwi_node_alloc;
|
||||
sc->sc_node_free = ic->ic_node_free;
|
||||
|
|
@ -2568,9 +2569,8 @@ iwi_config(struct iwi_softc *sc)
|
|||
|
||||
IWI_LOCK_ASSERT(sc);
|
||||
|
||||
IEEE80211_ADDR_COPY(ic->ic_myaddr, IF_LLADDR(ifp));
|
||||
DPRINTF(("Setting MAC address to %6D\n", ic->ic_myaddr, ":"));
|
||||
error = iwi_cmd(sc, IWI_CMD_SET_MAC_ADDRESS, ic->ic_myaddr,
|
||||
DPRINTF(("Setting MAC address to %6D\n", IF_LLADDR(ifp), ":"));
|
||||
error = iwi_cmd(sc, IWI_CMD_SET_MAC_ADDRESS, IF_LLADDR(ifp),
|
||||
IEEE80211_ADDR_LEN);
|
||||
if (error != 0)
|
||||
return error;
|
||||
|
|
|
|||
|
|
@ -132,7 +132,8 @@ void iwn_cmd_intr(struct iwn_softc *, struct iwn_rx_desc *);
|
|||
static void iwn_bmiss(void *, int);
|
||||
void iwn_notif_intr(struct iwn_softc *);
|
||||
void iwn_intr(void *);
|
||||
void iwn_read_eeprom(struct iwn_softc *);
|
||||
void iwn_read_eeprom(struct iwn_softc *,
|
||||
uint8_t macaddr[IEEE80211_ADDR_LEN]);
|
||||
static void iwn_read_eeprom_channels(struct iwn_softc *);
|
||||
void iwn_print_power_group(struct iwn_softc *, int);
|
||||
uint8_t iwn_plcp_signal(int);
|
||||
|
|
@ -254,6 +255,7 @@ iwn_attach(device_t dev)
|
|||
struct ieee80211com *ic;
|
||||
struct ifnet *ifp;
|
||||
int i, error, result;
|
||||
uint8_t macaddr[IEEE80211_ADDR_LEN];
|
||||
|
||||
sc->sc_dev = dev;
|
||||
|
||||
|
|
@ -410,7 +412,7 @@ iwn_attach(device_t dev)
|
|||
;
|
||||
#endif
|
||||
/* read supported channels and MAC address from EEPROM */
|
||||
iwn_read_eeprom(sc);
|
||||
iwn_read_eeprom(sc, macaddr);
|
||||
|
||||
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
|
||||
ifp->if_softc = sc;
|
||||
|
|
@ -422,7 +424,7 @@ iwn_attach(device_t dev)
|
|||
ifp->if_snd.ifq_drv_maxlen = IFQ_MAXLEN;
|
||||
IFQ_SET_READY(&ifp->if_snd);
|
||||
|
||||
ieee80211_ifattach(ic);
|
||||
ieee80211_ifattach(ic, macaddr);
|
||||
ic->ic_vap_create = iwn_vap_create;
|
||||
ic->ic_vap_delete = iwn_vap_delete;
|
||||
ic->ic_raw_xmit = iwn_raw_xmit;
|
||||
|
|
@ -2409,10 +2411,8 @@ iwn_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
|
|||
}
|
||||
|
||||
void
|
||||
iwn_read_eeprom(struct iwn_softc *sc)
|
||||
iwn_read_eeprom(struct iwn_softc *sc, uint8_t macaddr[IEEE80211_ADDR_LEN])
|
||||
{
|
||||
struct ifnet *ifp = sc->sc_ifp;
|
||||
struct ieee80211com *ic = ifp->if_l2com;
|
||||
char domain[4];
|
||||
uint16_t val;
|
||||
int i, error;
|
||||
|
|
@ -2427,8 +2427,8 @@ iwn_read_eeprom(struct iwn_softc *sc)
|
|||
device_printf(sc->sc_dev,"Reg Domain: %.4s", domain);
|
||||
|
||||
/* read and print MAC address */
|
||||
iwn_read_prom_data(sc, IWN_EEPROM_MAC, ic->ic_myaddr, 6);
|
||||
printf(", address %s\n", ether_sprintf(ic->ic_myaddr));
|
||||
iwn_read_prom_data(sc, IWN_EEPROM_MAC, macaddr, 6);
|
||||
printf(", address %6D\n", macaddr, ":");
|
||||
|
||||
/* read the list of authorized channels */
|
||||
iwn_read_eeprom_channels(sc);
|
||||
|
|
@ -3754,7 +3754,7 @@ iwn_scan(struct iwn_softc *sc)
|
|||
IEEE80211_FC0_SUBTYPE_PROBE_REQ;
|
||||
wh->i_fc[1] = IEEE80211_FC1_DIR_NODS;
|
||||
IEEE80211_ADDR_COPY(wh->i_addr1, ifp->if_broadcastaddr);
|
||||
IEEE80211_ADDR_COPY(wh->i_addr2, ic->ic_myaddr);
|
||||
IEEE80211_ADDR_COPY(wh->i_addr2, IF_LLADDR(ifp));
|
||||
IEEE80211_ADDR_COPY(wh->i_addr3, ifp->if_broadcastaddr);
|
||||
*(u_int16_t *)&wh->i_dur[0] = 0; /* filled by h/w */
|
||||
*(u_int16_t *)&wh->i_seq[0] = 0; /* filled by h/w */
|
||||
|
|
@ -3892,8 +3892,8 @@ iwn_config(struct iwn_softc *sc)
|
|||
|
||||
/* configure adapter */
|
||||
memset(&sc->config, 0, sizeof (struct iwn_config));
|
||||
IEEE80211_ADDR_COPY(sc->config.myaddr, ic->ic_myaddr);
|
||||
IEEE80211_ADDR_COPY(sc->config.wlap, ic->ic_myaddr);
|
||||
IEEE80211_ADDR_COPY(sc->config.myaddr, IF_LLADDR(ifp));
|
||||
IEEE80211_ADDR_COPY(sc->config.wlap, IF_LLADDR(ifp));
|
||||
/* set default channel */
|
||||
sc->config.chan = htole16(ieee80211_chan2ieee(ic, ic->ic_curchan));
|
||||
sc->config.flags = htole32(IWN_CONFIG_TSF);
|
||||
|
|
|
|||
|
|
@ -175,16 +175,10 @@ malo_bar0_write4(struct malo_softc *sc, bus_size_t off, uint32_t val)
|
|||
bus_space_write_4(sc->malo_io0t, sc->malo_io0h, off, val);
|
||||
}
|
||||
|
||||
static uint8_t
|
||||
malo_bar1_read1(struct malo_softc *sc, bus_size_t off)
|
||||
{
|
||||
return bus_space_read_1(sc->malo_io1t, sc->malo_io1h, off);
|
||||
}
|
||||
|
||||
int
|
||||
malo_attach(uint16_t devid, struct malo_softc *sc)
|
||||
{
|
||||
int error, i;
|
||||
int error;
|
||||
struct ieee80211com *ic;
|
||||
struct ifnet *ifp;
|
||||
struct malo_hal *mh;
|
||||
|
|
@ -203,16 +197,6 @@ malo_attach(uint16_t devid, struct malo_softc *sc)
|
|||
if_initname(ifp, device_get_name(sc->malo_dev),
|
||||
device_get_unit(sc->malo_dev));
|
||||
|
||||
/*
|
||||
* NB: get mac address from hardware directly here before we set DMAs
|
||||
* for HAL because we don't want to disturb operations of HAL at BAR 1.
|
||||
*/
|
||||
for (i = 0; i < IEEE80211_ADDR_LEN; i++) {
|
||||
/* XXX remove a magic number but we don't have documents. */
|
||||
ic->ic_myaddr[i] = malo_bar1_read1(sc, 0xa528 + i);
|
||||
DELAY(1000);
|
||||
}
|
||||
|
||||
mh = malo_hal_attach(sc->malo_dev, devid,
|
||||
sc->malo_io1h, sc->malo_io1t, sc->malo_dmat);
|
||||
if (mh == NULL) {
|
||||
|
|
@ -319,11 +303,8 @@ malo_attach(uint16_t devid, struct malo_softc *sc)
|
|||
ic->ic_headroom = sizeof(struct malo_txrec) -
|
||||
sizeof(struct ieee80211_frame);
|
||||
|
||||
/* get mac address from hardware */
|
||||
IEEE80211_ADDR_COPY(ic->ic_myaddr, sc->malo_hwspecs.macaddr);
|
||||
|
||||
/* call MI attach routine. */
|
||||
ieee80211_ifattach(ic);
|
||||
ieee80211_ifattach(ic, sc->malo_hwspecs.macaddr);
|
||||
/* override default methods */
|
||||
ic->ic_vap_create = malo_vap_create;
|
||||
ic->ic_vap_delete = malo_vap_delete;
|
||||
|
|
@ -1635,14 +1616,6 @@ malo_mode_init(struct malo_softc *sc)
|
|||
struct ieee80211com *ic = ifp->if_l2com;
|
||||
struct malo_hal *mh = sc->malo_mh;
|
||||
|
||||
/*
|
||||
* Handle any link-level address change. Note that we only
|
||||
* need to force ic_myaddr; any other addresses are handled
|
||||
* as a byproduct of the ifnet code marking the interface
|
||||
* down then up.
|
||||
*/
|
||||
IEEE80211_ADDR_COPY(ic->ic_myaddr, IF_LLADDR(ifp));
|
||||
|
||||
/*
|
||||
* NB: Ignore promisc in hostap mode; it's set by the
|
||||
* bridge. This is wrong but we have no way to
|
||||
|
|
|
|||
|
|
@ -202,6 +202,7 @@ rt2560_attach(device_t dev, int id)
|
|||
struct ifnet *ifp;
|
||||
int error;
|
||||
uint8_t bands;
|
||||
uint8_t macaddr[IEEE80211_ADDR_LEN];
|
||||
|
||||
sc->sc_dev = dev;
|
||||
|
||||
|
|
@ -260,7 +261,7 @@ rt2560_attach(device_t dev, int id)
|
|||
ic = ifp->if_l2com;
|
||||
|
||||
/* retrieve MAC address */
|
||||
rt2560_get_macaddr(sc, ic->ic_myaddr);
|
||||
rt2560_get_macaddr(sc, macaddr);
|
||||
|
||||
ifp->if_softc = sc;
|
||||
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
|
||||
|
|
@ -300,7 +301,7 @@ rt2560_attach(device_t dev, int id)
|
|||
setbit(&bands, IEEE80211_MODE_11A);
|
||||
ieee80211_init_channels(ic, NULL, &bands);
|
||||
|
||||
ieee80211_ifattach(ic);
|
||||
ieee80211_ifattach(ic, macaddr);
|
||||
ic->ic_newassoc = rt2560_newassoc;
|
||||
ic->ic_raw_xmit = rt2560_raw_xmit;
|
||||
ic->ic_updateslot = rt2560_update_slot;
|
||||
|
|
@ -2683,8 +2684,7 @@ rt2560_init_locked(struct rt2560_softc *sc)
|
|||
for (i = 0; i < N(rt2560_def_mac); i++)
|
||||
RAL_WRITE(sc, rt2560_def_mac[i].reg, rt2560_def_mac[i].val);
|
||||
|
||||
IEEE80211_ADDR_COPY(ic->ic_myaddr, IF_LLADDR(ifp));
|
||||
rt2560_set_macaddr(sc, ic->ic_myaddr);
|
||||
rt2560_set_macaddr(sc, IF_LLADDR(ifp));
|
||||
|
||||
/* set basic rate set (will be updated later) */
|
||||
RAL_WRITE(sc, RT2560_ARSP_PLCP_1, 0x153);
|
||||
|
|
|
|||
|
|
@ -155,7 +155,7 @@ static int rt2661_wme_update(struct ieee80211com *) __unused;
|
|||
static void rt2661_update_slot(struct ifnet *);
|
||||
static const char *rt2661_get_rf(int);
|
||||
static void rt2661_read_eeprom(struct rt2661_softc *,
|
||||
struct ieee80211com *);
|
||||
uint8_t macaddr[IEEE80211_ADDR_LEN]);
|
||||
static int rt2661_bbp_init(struct rt2661_softc *);
|
||||
static void rt2661_init_locked(struct rt2661_softc *);
|
||||
static void rt2661_init(void *);
|
||||
|
|
@ -204,6 +204,7 @@ rt2661_attach(device_t dev, int id)
|
|||
uint32_t val;
|
||||
int error, ac, ntries;
|
||||
uint8_t bands;
|
||||
uint8_t macaddr[IEEE80211_ADDR_LEN];
|
||||
|
||||
sc->sc_id = id;
|
||||
sc->sc_dev = dev;
|
||||
|
|
@ -234,7 +235,7 @@ rt2661_attach(device_t dev, int id)
|
|||
}
|
||||
|
||||
/* retrieve RF rev. no and various other things from EEPROM */
|
||||
rt2661_read_eeprom(sc, ic);
|
||||
rt2661_read_eeprom(sc, macaddr);
|
||||
|
||||
device_printf(dev, "MAC/BBP RT%X, RF %s\n", val,
|
||||
rt2661_get_rf(sc->rf_rev));
|
||||
|
|
@ -303,7 +304,7 @@ rt2661_attach(device_t dev, int id)
|
|||
setbit(&bands, IEEE80211_MODE_11A);
|
||||
ieee80211_init_channels(ic, NULL, &bands);
|
||||
|
||||
ieee80211_ifattach(ic);
|
||||
ieee80211_ifattach(ic, macaddr);
|
||||
ic->ic_newassoc = rt2661_newassoc;
|
||||
ic->ic_node_alloc = rt2661_node_alloc;
|
||||
#if 0
|
||||
|
|
@ -2219,23 +2220,23 @@ rt2661_get_rf(int rev)
|
|||
}
|
||||
|
||||
static void
|
||||
rt2661_read_eeprom(struct rt2661_softc *sc, struct ieee80211com *ic)
|
||||
rt2661_read_eeprom(struct rt2661_softc *sc, uint8_t macaddr[IEEE80211_ADDR_LEN])
|
||||
{
|
||||
uint16_t val;
|
||||
int i;
|
||||
|
||||
/* read MAC address */
|
||||
val = rt2661_eeprom_read(sc, RT2661_EEPROM_MAC01);
|
||||
ic->ic_myaddr[0] = val & 0xff;
|
||||
ic->ic_myaddr[1] = val >> 8;
|
||||
macaddr[0] = val & 0xff;
|
||||
macaddr[1] = val >> 8;
|
||||
|
||||
val = rt2661_eeprom_read(sc, RT2661_EEPROM_MAC23);
|
||||
ic->ic_myaddr[2] = val & 0xff;
|
||||
ic->ic_myaddr[3] = val >> 8;
|
||||
macaddr[2] = val & 0xff;
|
||||
macaddr[3] = val >> 8;
|
||||
|
||||
val = rt2661_eeprom_read(sc, RT2661_EEPROM_MAC45);
|
||||
ic->ic_myaddr[4] = val & 0xff;
|
||||
ic->ic_myaddr[5] = val >> 8;
|
||||
macaddr[4] = val & 0xff;
|
||||
macaddr[5] = val >> 8;
|
||||
|
||||
val = rt2661_eeprom_read(sc, RT2661_EEPROM_ANTENNA);
|
||||
/* XXX: test if different from 0xffff? */
|
||||
|
|
@ -2413,8 +2414,7 @@ rt2661_init_locked(struct rt2661_softc *sc)
|
|||
for (i = 0; i < N(rt2661_def_mac); i++)
|
||||
RAL_WRITE(sc, rt2661_def_mac[i].reg, rt2661_def_mac[i].val);
|
||||
|
||||
IEEE80211_ADDR_COPY(ic->ic_myaddr, IF_LLADDR(ifp));
|
||||
rt2661_set_macaddr(sc, ic->ic_myaddr);
|
||||
rt2661_set_macaddr(sc, IF_LLADDR(ifp));
|
||||
|
||||
/* set host ready */
|
||||
RAL_WRITE(sc, RT2661_MAC_CSR1, 3);
|
||||
|
|
|
|||
|
|
@ -494,7 +494,6 @@ rum_attach_post(struct usb2_proc_msg *pm)
|
|||
|
||||
ic->ic_ifp = ifp;
|
||||
ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */
|
||||
IEEE80211_ADDR_COPY(ic->ic_myaddr, sc->sc_bssid);
|
||||
|
||||
/* set device capabilities */
|
||||
ic->ic_caps =
|
||||
|
|
@ -516,7 +515,7 @@ rum_attach_post(struct usb2_proc_msg *pm)
|
|||
setbit(&bands, IEEE80211_MODE_11A);
|
||||
ieee80211_init_channels(ic, NULL, &bands);
|
||||
|
||||
ieee80211_ifattach(ic);
|
||||
ieee80211_ifattach(ic, sc->sc_bssid);
|
||||
ic->ic_update_promisc = rum_update_promisc;
|
||||
ic->ic_newassoc = rum_newassoc;
|
||||
ic->ic_raw_xmit = rum_raw_xmit;
|
||||
|
|
@ -2064,8 +2063,7 @@ rum_init_task(struct usb2_proc_msg *pm)
|
|||
/* clear STA registers */
|
||||
rum_read_multi(sc, RT2573_STA_CSR0, sc->sta, sizeof sc->sta);
|
||||
|
||||
IEEE80211_ADDR_COPY(ic->ic_myaddr, IF_LLADDR(ifp));
|
||||
rum_set_macaddr(sc, ic->ic_myaddr);
|
||||
rum_set_macaddr(sc, IF_LLADDR(ifp));
|
||||
|
||||
/* initialize ASIC */
|
||||
rum_write(sc, RT2573_MAC_CSR1, 4);
|
||||
|
|
|
|||
|
|
@ -485,7 +485,6 @@ ural_attach_post(struct usb2_proc_msg *pm)
|
|||
|
||||
ic->ic_ifp = ifp;
|
||||
ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */
|
||||
IEEE80211_ADDR_COPY(ic->ic_myaddr, sc->sc_bssid);
|
||||
|
||||
/* set device capabilities */
|
||||
ic->ic_caps =
|
||||
|
|
@ -507,7 +506,7 @@ ural_attach_post(struct usb2_proc_msg *pm)
|
|||
setbit(&bands, IEEE80211_MODE_11A);
|
||||
ieee80211_init_channels(ic, NULL, &bands);
|
||||
|
||||
ieee80211_ifattach(ic);
|
||||
ieee80211_ifattach(ic, sc->sc_bssid);
|
||||
ic->ic_update_promisc = ural_update_promisc;
|
||||
ic->ic_newassoc = ural_newassoc;
|
||||
ic->ic_raw_xmit = ural_raw_xmit;
|
||||
|
|
@ -2216,8 +2215,7 @@ ural_init_task(struct usb2_proc_msg *pm)
|
|||
ural_set_txantenna(sc, sc->tx_ant);
|
||||
ural_set_rxantenna(sc, sc->rx_ant);
|
||||
|
||||
IEEE80211_ADDR_COPY(ic->ic_myaddr, IF_LLADDR(ifp));
|
||||
ural_set_macaddr(sc, ic->ic_myaddr);
|
||||
ural_set_macaddr(sc, IF_LLADDR(ifp));
|
||||
|
||||
/*
|
||||
* Allocate Tx and Rx xfer queues.
|
||||
|
|
|
|||
|
|
@ -396,7 +396,6 @@ zyd_attach_post(struct usb2_proc_msg *pm)
|
|||
ic->ic_ifp = ifp;
|
||||
ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */
|
||||
ic->ic_opmode = IEEE80211_M_STA;
|
||||
IEEE80211_ADDR_COPY(ic->ic_myaddr, sc->sc_bssid);
|
||||
|
||||
/* set device capabilities */
|
||||
ic->ic_caps =
|
||||
|
|
@ -413,7 +412,7 @@ zyd_attach_post(struct usb2_proc_msg *pm)
|
|||
setbit(&bands, IEEE80211_MODE_11G);
|
||||
ieee80211_init_channels(ic, NULL, &bands);
|
||||
|
||||
ieee80211_ifattach(ic);
|
||||
ieee80211_ifattach(ic, sc->sc_bssid);
|
||||
ic->ic_newassoc = zyd_newassoc;
|
||||
ic->ic_raw_xmit = zyd_raw_xmit;
|
||||
ic->ic_node_alloc = zyd_node_alloc;
|
||||
|
|
@ -2859,10 +2858,9 @@ zyd_init_task(struct usb2_proc_msg *pm)
|
|||
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
|
||||
zyd_stop_task(pm);
|
||||
|
||||
IEEE80211_ADDR_COPY(ic->ic_myaddr, IF_LLADDR(ifp));
|
||||
DPRINTF(sc, ZYD_DEBUG_INIT, "setting MAC address to %s\n",
|
||||
ether_sprintf(ic->ic_myaddr));
|
||||
error = zyd_set_macaddr(sc, ic->ic_myaddr);
|
||||
DPRINTF(sc, ZYD_DEBUG_INIT, "setting MAC address to %6D\n",
|
||||
IF_LLADDR(ifp), ":");
|
||||
error = zyd_set_macaddr(sc, IF_LLADDR(ifp));
|
||||
if (error != 0)
|
||||
return;
|
||||
|
||||
|
|
|
|||
|
|
@ -245,6 +245,7 @@ wi_attach(device_t dev)
|
|||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00
|
||||
};
|
||||
int error;
|
||||
uint8_t macaddr[IEEE80211_ADDR_LEN];
|
||||
|
||||
ifp = sc->sc_ifp = if_alloc(IFT_IEEE80211);
|
||||
if (ifp == NULL) {
|
||||
|
|
@ -312,12 +313,12 @@ wi_attach(device_t dev)
|
|||
* the probe to fail.
|
||||
*/
|
||||
buflen = IEEE80211_ADDR_LEN;
|
||||
error = wi_read_rid(sc, WI_RID_MAC_NODE, ic->ic_myaddr, &buflen);
|
||||
error = wi_read_rid(sc, WI_RID_MAC_NODE, macaddr, &buflen);
|
||||
if (error != 0) {
|
||||
buflen = IEEE80211_ADDR_LEN;
|
||||
error = wi_read_rid(sc, WI_RID_MAC_NODE, ic->ic_myaddr, &buflen);
|
||||
error = wi_read_rid(sc, WI_RID_MAC_NODE, macaddr, &buflen);
|
||||
}
|
||||
if (error || IEEE80211_ADDR_EQ(ic->ic_myaddr, empty_macaddr)) {
|
||||
if (error || IEEE80211_ADDR_EQ(macaddr, empty_macaddr)) {
|
||||
if (error != 0)
|
||||
device_printf(dev, "mac read failed %d\n", error);
|
||||
else {
|
||||
|
|
@ -451,7 +452,7 @@ wi_attach(device_t dev)
|
|||
sc->sc_portnum = WI_DEFAULT_PORT;
|
||||
TASK_INIT(&sc->sc_oor_task, 0, wi_status_oor, ic);
|
||||
|
||||
ieee80211_ifattach(ic);
|
||||
ieee80211_ifattach(ic, macaddr);
|
||||
ic->ic_raw_xmit = wi_raw_xmit;
|
||||
ic->ic_scan_start = wi_scan_start;
|
||||
ic->ic_scan_end = wi_scan_end;
|
||||
|
|
@ -690,7 +691,6 @@ static void
|
|||
wi_init_locked(struct wi_softc *sc)
|
||||
{
|
||||
struct ifnet *ifp = sc->sc_ifp;
|
||||
struct ieee80211com *ic = ifp->if_l2com;
|
||||
int wasenabled;
|
||||
|
||||
WI_LOCK_ASSERT(sc);
|
||||
|
|
@ -699,8 +699,7 @@ wi_init_locked(struct wi_softc *sc)
|
|||
if (wasenabled)
|
||||
wi_stop_locked(sc, 1);
|
||||
|
||||
IEEE80211_ADDR_COPY(ic->ic_myaddr, IF_LLADDR(ifp));
|
||||
if (wi_setup_locked(sc, sc->sc_porttype, 3, ic->ic_myaddr) != 0) {
|
||||
if (wi_setup_locked(sc, sc->sc_porttype, 3, IF_LLADDR(ifp)) != 0) {
|
||||
if_printf(ifp, "interface not running\n");
|
||||
wi_stop_locked(sc, 1);
|
||||
return;
|
||||
|
|
|
|||
|
|
@ -211,7 +211,8 @@ static void wpi_set_channel(struct ieee80211com *);
|
|||
static void wpi_scan_curchan(struct ieee80211_scan_state *, unsigned long);
|
||||
static void wpi_scan_mindwell(struct ieee80211_scan_state *);
|
||||
static int wpi_ioctl(struct ifnet *, u_long, caddr_t);
|
||||
static void wpi_read_eeprom(struct wpi_softc *);
|
||||
static void wpi_read_eeprom(struct wpi_softc *,
|
||||
uint8_t macaddr[IEEE80211_ADDR_LEN]);
|
||||
static void wpi_read_eeprom_channels(struct wpi_softc *, int);
|
||||
static void wpi_read_eeprom_group(struct wpi_softc *, int);
|
||||
static int wpi_cmd(struct wpi_softc *, int, const void *, int, int);
|
||||
|
|
@ -493,6 +494,7 @@ wpi_attach(device_t dev)
|
|||
int ac, error, supportsa = 1;
|
||||
uint32_t tmp;
|
||||
const struct wpi_ident *ident;
|
||||
uint8_t macaddr[IEEE80211_ADDR_LEN];
|
||||
|
||||
sc->sc_dev = dev;
|
||||
|
||||
|
|
@ -650,7 +652,7 @@ wpi_attach(device_t dev)
|
|||
* Read in the eeprom and also setup the channels for
|
||||
* net80211. We don't set the rates as net80211 does this for us
|
||||
*/
|
||||
wpi_read_eeprom(sc);
|
||||
wpi_read_eeprom(sc, macaddr);
|
||||
|
||||
if (bootverbose || WPI_DEBUG_SET) {
|
||||
device_printf(sc->sc_dev, "Regulatory Domain: %.4s\n", sc->domain);
|
||||
|
|
@ -675,7 +677,7 @@ wpi_attach(device_t dev)
|
|||
ifp->if_snd.ifq_drv_maxlen = IFQ_MAXLEN;
|
||||
IFQ_SET_READY(&ifp->if_snd);
|
||||
|
||||
ieee80211_ifattach(ic);
|
||||
ieee80211_ifattach(ic, macaddr);
|
||||
/* override default methods */
|
||||
ic->ic_node_alloc = wpi_node_alloc;
|
||||
ic->ic_newassoc = wpi_newassoc;
|
||||
|
|
@ -2150,10 +2152,8 @@ wpi_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
|
|||
* Extract various information from EEPROM.
|
||||
*/
|
||||
static void
|
||||
wpi_read_eeprom(struct wpi_softc *sc)
|
||||
wpi_read_eeprom(struct wpi_softc *sc, uint8_t macaddr[IEEE80211_ADDR_LEN])
|
||||
{
|
||||
struct ifnet *ifp = sc->sc_ifp;
|
||||
struct ieee80211com *ic = ifp->if_l2com;
|
||||
int i;
|
||||
|
||||
/* read the hardware capabilities, revision and SKU type */
|
||||
|
|
@ -2165,7 +2165,7 @@ wpi_read_eeprom(struct wpi_softc *sc)
|
|||
wpi_read_prom_data(sc, WPI_EEPROM_DOMAIN, sc->domain, 4);
|
||||
|
||||
/* read in the hw MAC address */
|
||||
wpi_read_prom_data(sc, WPI_EEPROM_MAC, ic->ic_myaddr, 6);
|
||||
wpi_read_prom_data(sc, WPI_EEPROM_MAC, macaddr, 6);
|
||||
|
||||
/* read the list of authorized channels */
|
||||
for (i = 0; i < WPI_CHAN_BANDS_COUNT; i++)
|
||||
|
|
@ -2638,7 +2638,7 @@ wpi_scan(struct wpi_softc *sc)
|
|||
IEEE80211_FC0_SUBTYPE_PROBE_REQ;
|
||||
wh->i_fc[1] = IEEE80211_FC1_DIR_NODS;
|
||||
IEEE80211_ADDR_COPY(wh->i_addr1, ifp->if_broadcastaddr);
|
||||
IEEE80211_ADDR_COPY(wh->i_addr2, ic->ic_myaddr);
|
||||
IEEE80211_ADDR_COPY(wh->i_addr2, IF_LLADDR(ifp));
|
||||
IEEE80211_ADDR_COPY(wh->i_addr3, ifp->if_broadcastaddr);
|
||||
*(u_int16_t *)&wh->i_dur[0] = 0; /* filled by h/w */
|
||||
*(u_int16_t *)&wh->i_seq[0] = 0; /* filled by h/w */
|
||||
|
|
@ -2810,7 +2810,7 @@ wpi_config(struct wpi_softc *sc)
|
|||
|
||||
/* configure adapter */
|
||||
memset(&sc->config, 0, sizeof (struct wpi_config));
|
||||
IEEE80211_ADDR_COPY(sc->config.myaddr, ic->ic_myaddr);
|
||||
IEEE80211_ADDR_COPY(sc->config.myaddr, IF_LLADDR(ifp));
|
||||
/*set default channel*/
|
||||
sc->config.chan = htole16(ieee80211_chan2ieee(ic, ic->ic_curchan));
|
||||
sc->config.flags = htole32(WPI_CONFIG_TSF);
|
||||
|
|
|
|||
|
|
@ -239,7 +239,8 @@ null_input(struct ifnet *ifp, struct mbuf *m)
|
|||
* the driver on attach to prior to creating any vap's.
|
||||
*/
|
||||
void
|
||||
ieee80211_ifattach(struct ieee80211com *ic)
|
||||
ieee80211_ifattach(struct ieee80211com *ic,
|
||||
const uint8_t macaddr[IEEE80211_ADDR_LEN])
|
||||
{
|
||||
struct ifnet *ifp = ic->ic_ifp;
|
||||
struct sockaddr_dl *sdl;
|
||||
|
|
@ -290,7 +291,7 @@ ieee80211_ifattach(struct ieee80211com *ic)
|
|||
sdl = (struct sockaddr_dl *)ifa->ifa_addr;
|
||||
sdl->sdl_type = IFT_ETHER; /* XXX IFT_IEEE80211? */
|
||||
sdl->sdl_alen = IEEE80211_ADDR_LEN;
|
||||
IEEE80211_ADDR_COPY(LLADDR(sdl), ic->ic_myaddr);
|
||||
IEEE80211_ADDR_COPY(LLADDR(sdl), macaddr);
|
||||
}
|
||||
|
||||
/*
|
||||
|
|
|
|||
|
|
@ -445,7 +445,6 @@ _db_show_com(const struct ieee80211com *ic, int showvaps, int showsta, int showp
|
|||
db_printf(" opmode %s", ieee80211_opmode_name[ic->ic_opmode]);
|
||||
db_printf("\n");
|
||||
db_printf("\tmedia %p", &ic->ic_media);
|
||||
db_printf(" myaddr %s", ether_sprintf(ic->ic_myaddr));
|
||||
db_printf(" inact %p", &ic->ic_inact);
|
||||
db_printf("\n");
|
||||
|
||||
|
|
|
|||
|
|
@ -43,6 +43,7 @@ __FBSDID("$FreeBSD$");
|
|||
#include <sys/socket.h>
|
||||
|
||||
#include <net/if.h>
|
||||
#include <net/if_dl.h>
|
||||
#include <net/if_clone.h>
|
||||
#include <net/if_media.h>
|
||||
#include <net/if_types.h>
|
||||
|
|
@ -137,7 +138,7 @@ wlan_clone_create(struct if_clone *ifc, int unit, caddr_t params)
|
|||
vap = ic->ic_vap_create(ic, ifc->ifc_name, unit,
|
||||
cp.icp_opmode, cp.icp_flags, cp.icp_bssid,
|
||||
cp.icp_flags & IEEE80211_CLONE_MACADDR ?
|
||||
cp.icp_macaddr : ic->ic_myaddr);
|
||||
cp.icp_macaddr : (const uint8_t *)IF_LLADDR(ifp));
|
||||
return (vap == NULL ? EIO : 0);
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -115,7 +115,6 @@ struct ieee80211com {
|
|||
enum ieee80211_phytype ic_phytype; /* XXX wrong for multi-mode */
|
||||
enum ieee80211_opmode ic_opmode; /* operation mode */
|
||||
struct ifmedia ic_media; /* interface media config */
|
||||
uint8_t ic_myaddr[IEEE80211_ADDR_LEN];
|
||||
struct callout ic_inact; /* inactivity processing */
|
||||
struct task ic_parent_task; /* deferred parent processing */
|
||||
|
||||
|
|
@ -575,7 +574,8 @@ MALLOC_DECLARE(M_80211_VAP);
|
|||
"\20\1LDPC\2CHWIDTH40\5GREENFIELD\6SHORTGI20\7SHORTGI40\10TXSTBC" \
|
||||
"\21AMPDU\22AMSDU\23HT\24SMPS\25RIFS"
|
||||
|
||||
void ieee80211_ifattach(struct ieee80211com *);
|
||||
void ieee80211_ifattach(struct ieee80211com *,
|
||||
const uint8_t macaddr[IEEE80211_ADDR_LEN]);
|
||||
void ieee80211_ifdetach(struct ieee80211com *);
|
||||
int ieee80211_vap_setup(struct ieee80211com *, struct ieee80211vap *,
|
||||
const char name[IFNAMSIZ], int unit, int opmode, int flags,
|
||||
|
|
|
|||
Loading…
Reference in a new issue