From 1d705c5cf07ff146160782bd4d27c7fedcf05b24 Mon Sep 17 00:00:00 2001 From: Colin Percival Date: Sat, 12 Jun 2004 21:41:41 +0000 Subject: [PATCH] s/mbps/Mbps/ We don't support any 10 millibit-per-second network cards. PR: docs/67719 Submitted by: Linh Pham MFC after: 1 week --- share/man/man4/bge.4 | 2 +- share/man/man4/cue.4 | 2 +- share/man/man4/dc.4 | 2 +- share/man/man4/gx.4 | 4 ++-- share/man/man4/kue.4 | 2 +- share/man/man4/lge.4 | 2 +- share/man/man4/nge.4 | 4 ++-- 7 files changed, 9 insertions(+), 9 deletions(-) diff --git a/share/man/man4/bge.4 b/share/man/man4/bge.4 index 23689faa5a9..20a51c7ff04 100644 --- a/share/man/man4/bge.4 +++ b/share/man/man4/bge.4 @@ -92,7 +92,7 @@ speed in TBI mode. .Pp Most BCM5700-based cards also use the Broadcom BCM5401 or BCM5411 10/100/1000 copper gigabit transceivers, -which support autonegotiation of 10, 100 and 1000mbps modes in +which support autonegotiation of 10, 100 and 1000Mbps modes in full or half duplex. .Pp The BCM570x also supports jumbo frames, which can be configured diff --git a/share/man/man4/cue.4 b/share/man/man4/cue.4 index 5197a144c32..0701bb637eb 100644 --- a/share/man/man4/cue.4 +++ b/share/man/man4/cue.4 @@ -54,7 +54,7 @@ filter entry for the station address and promiscuous mode. Packets are received and transmitted over separate USB bulk transfer endpoints. .Pp -The CATC adapter supports only 10mbps half-duplex mode, hence there +The CATC adapter supports only 10Mbps half-duplex mode, hence there are no .Xr ifmedia 4 modes to select. diff --git a/share/man/man4/dc.4 b/share/man/man4/dc.4 index 22ad39f95fd..34874c4e9fe 100644 --- a/share/man/man4/dc.4 +++ b/share/man/man4/dc.4 @@ -238,7 +238,7 @@ half duplex mode if this media option is not specified. .El .Pp Note that the 100baseTX media type may not be available on certain -Intel 21143 adapters which support 10mbps media attachments only. +Intel 21143 adapters which support 10Mbps media attachments only. For more information on configuring this device, see .Xr ifconfig 8 . .Sh DIAGNOSTICS diff --git a/share/man/man4/gx.4 b/share/man/man4/gx.4 index 1c4dc571b40..39765a4591c 100644 --- a/share/man/man4/gx.4 +++ b/share/man/man4/gx.4 @@ -51,8 +51,8 @@ Both boards support VLAN tagging/insertion and the 82543 additionally supports TCP/IP checksum offload. .Pp The 82543-T cards use the Marvell 10/100/1000 copper gigabit transceiver -chip, which supports autonegotiation of 10, 100 and 1000mbps modes in -full or half duplex, however half duplex 1000mbps is not supported. +chip, which supports autonegotiation of 10, 100 and 1000Mbps modes in +full or half duplex, however half duplex 1000Mbps is not supported. .Pp The driver also supports jumbo frames, which can be configured via the interface MTU setting. diff --git a/share/man/man4/kue.4 b/share/man/man4/kue.4 index 3ff8c5c6701..ec34399c7bd 100644 --- a/share/man/man4/kue.4 +++ b/share/man/man4/kue.4 @@ -83,7 +83,7 @@ filter entry for the station address and promiscuous mode. Packets are received and transmitted over separate USB bulk transfer endpoints. .Pp -The Kawasaki adapter supports only 10mbps half-duplex mode, hence there +The Kawasaki adapter supports only 10Mbps half-duplex mode, hence there are no .Xr ifmedia 4 modes to select. diff --git a/share/man/man4/lge.4 b/share/man/man4/lge.4 index d6a1cc5bc61..ed7c34248b6 100644 --- a/share/man/man4/lge.4 +++ b/share/man/man4/lge.4 @@ -54,7 +54,7 @@ SMC TigerCard 1000 (SMC9462SX) D-Link DGE-500SX .El .Pp -These NICs are capable of 1000mbps speeds over fiber optic cable. +These NICs are capable of 1000Mbps speeds over fiber optic cable. The LXT1001 also supports a GMII port for use with 10/100/1000 copper PHYs, however there aren't currently any NICs on the market that use this feature. diff --git a/share/man/man4/nge.4 b/share/man/man4/nge.4 index fcb8e4caa45..cb4ca635e44 100644 --- a/share/man/man4/nge.4 +++ b/share/man/man4/nge.4 @@ -70,7 +70,7 @@ Ark PC SOHO-GA2500T (32-bit PCI) and SOHO-GA2000T (64-bit PCI) Trendware TEG-PCITX (32-bit PCI) and TEG-PCITX2 (64-bit PCI) .El .Pp -All of these NICs are capable of 10, 100 and 1000mbps speeds over CAT5 +All of these NICs are capable of 10, 100 and 1000Mbps speeds over CAT5 copper cable. The DP83820 supports TBI (ten bit interface) and GMII transceivers, which means it can be used with either copper or 1000baseX @@ -80,7 +80,7 @@ VLAN tagging/insertion as well as a 2048-bit multicast hash filter and up to 4 pattern match buffers. .Pp Most cards also use the DP83861 10/100/1000 copper gigabit transceiver -chip, which supports autonegotiation of 10, 100 and 1000mbps modes in +chip, which supports autonegotiation of 10, 100 and 1000Mbps modes in full or half duplex. .Pp The DP83820 also supports jumbo frames, which can be configured