opnsense-src/sys/modules/sound/driver/Makefile

# $FreeBSD$

SUBDIR=		ad1816 als4000 atiixp cs4281 csa ds1 emu10k1 emu10kx
SUBDIR+=	envy24 envy24ht es137x ess fm801 hda ich maestro maestro3
SUBDIR+=	neomagic sb16 sb8 sbc solo spicds t4dwave via8233
SUBDIR+=	via82c686 vibes driver uaudio

.if ${MACHINE_CPUARCH} == "i386" || ${MACHINE_CPUARCH} == "amd64"
SUBDIR+=	cmi mss
.endif

.if ${MACHINE_CPUARCH} == "sparc64"
.if ${MACHINE} == "sparc64"
SUBDIR+=	audiocs
.endif
.endif

.if ${MACHINE_CPUARCH} == "powerpc"
SUBDIR+=	ai2s davbus
.endif

.include <bsd.subdir.mk>
newpcm module makefiles once built, 'kld_load snd_driver; kldunload snd_driver' will load all sound drivers and unload all unattached ones. attached drivers do not yet support unloading. 2000-07-04 19:32:15 -04:00			`# $FreeBSD$`

Add support for the I2S and davbus audio controllers found in Apple PowerPC hardware. Submitted by: Marco Trillo 2009-01-25 13:20:15 -05:00			`SUBDIR= ad1816 als4000 atiixp cs4281 csa ds1 emu10k1 emu10kx`
			`SUBDIR+= envy24 envy24ht es137x ess fm801 hda ich maestro maestro3`
			`SUBDIR+= neomagic sb16 sb8 sbc solo spicds t4dwave via8233`
			`SUBDIR+= via82c686 vibes driver uaudio`

MFtbemd: Use MACHINE_CPUARCH in preference to MACHINE_ARCH. The former is the source code location of the machine, the latter the binary output. In general, we want to use MACHINE_CPUARCH instead of MACHINE_ARCH unless we're tesitng for a specific target. The isn't even moot for i386/amd64 where there's momemntum towards a MACHINE_CPUARCH == x86, although a specific cleanup for that likely would be needed... 2010-08-23 02:13:29 -04:00			`.if ${MACHINE_CPUARCH} == "i386" \|\| ${MACHINE_CPUARCH} == "amd64"`
Add support for the I2S and davbus audio controllers found in Apple PowerPC hardware. Submitted by: Marco Trillo 2009-01-25 13:20:15 -05:00			`SUBDIR+= cmi mss`
			`.endif`

MFtbemd: Use MACHINE_CPUARCH in preference to MACHINE_ARCH. The former is the source code location of the machine, the latter the binary output. In general, we want to use MACHINE_CPUARCH instead of MACHINE_ARCH unless we're tesitng for a specific target. The isn't even moot for i386/amd64 where there's momemntum towards a MACHINE_CPUARCH == x86, although a specific cleanup for that likely would be needed... 2010-08-23 02:13:29 -04:00			`.if ${MACHINE_CPUARCH} == "sparc64"`
Don't build unused SBus front-ends for sun4v, don't build EBus front-ends which are also likely to be irrelevant for sun4v (there's no SBus on sun4v and only some EBus devices). While at it fix some style bugs according to style.Makefile(5) where appropriate. MFC after: 3 days 2008-05-04 10:59:25 -04:00			`.if ${MACHINE} == "sparc64"`
Add support for the I2S and davbus audio controllers found in Apple PowerPC hardware. Submitted by: Marco Trillo 2009-01-25 13:20:15 -05:00			`SUBDIR+= audiocs`
Don't build unused SBus front-ends for sun4v, don't build EBus front-ends which are also likely to be irrelevant for sun4v (there's no SBus on sun4v and only some EBus devices). While at it fix some style bugs according to style.Makefile(5) where appropriate. MFC after: 3 days 2008-05-04 10:59:25 -04:00			`.endif`
Add support for the I2S and davbus audio controllers found in Apple PowerPC hardware. Submitted by: Marco Trillo 2009-01-25 13:20:15 -05:00			`.endif`

Make kernel modules build correctly on 64-bit PowerPC. 2010-07-13 08:47:31 -04:00			`.if ${MACHINE_CPUARCH} == "powerpc"`
Add support for the I2S and davbus audio controllers found in Apple PowerPC hardware. Submitted by: Marco Trillo 2009-01-25 13:20:15 -05:00			`SUBDIR+= ai2s davbus`
Device driver for onboard CS4231 audio controller which is found on UltraSPARC workstations. The driver is based on OpenBSD's SBus cs4231 driver and heavily modified to incorporate into sound(4) infrastructure. Due to the lack of APCDMA documentation, the DMA code of SBus cs4231 came from OpenBSD's driver. The driver runs without Giant lock and supports both SBus and EBus based CS4231 audio controller. Special thanks to marius for providing feedbacks during the driver writing. His feedback made it possible to write hiccup free playback code under high system loads. Approved by: jake (mentor) Reviewed by: marius (initial version) Tested by: marius, kwm, Julian C. Dunn(jdunn AT opentrend DOT net) 2004-10-25 06:29:57 -04:00			`.endif`
newpcm module makefiles once built, 'kld_load snd_driver; kldunload snd_driver' will load all sound drivers and unload all unattached ones. attached drivers do not yet support unloading. 2000-07-04 19:32:15 -04:00
			`.include <bsd.subdir.mk>`