opnsense-src/gnu/usr.bin/binutils/ld/Makefile

# $FreeBSD$

.include "../Makefile.inc0"

.PATH: ${SRCDIR}/ld

PROG=	ld
SCRIPTDIR= /usr/libdata/ldscripts
SRCS+=	ldcref.c ldctor.c ldemul.c ldemul-list.h ldexp.c ldfile.c \
	ldgram.y ldlang.c ldlex.l ldmain.c ldmisc.c \
	ldver.c ldwrite.c lexsup.c mri.c

WARNS?=	1
CFLAGS+= -DSCRIPTDIR=\"${TOOLS_PREFIX}/usr/libdata\"
CFLAGS+= -DBFD_VERSION_STRING=\"${VERSION}\"
CFLAGS+= -I${SRCDIR}/ld -I${SRCDIR}/bfd
NOSHARED?= yes
DPADD=	${RELTOP}/libbfd/libbfd.a
DPADD+=	${RELTOP}/libiberty/libiberty.a
LDADD=	${DPADD}
CLEANDIRS+=	ldscripts
CLEANFILES+=	ldemul-list.h stringify.sed

# If set, BINUTILSDISTDIR is the path to a directory containing the full GNU
# binutils release. FreeBSD only distributes the bits that are required to
# build native architectures. BINUTILSDISTDIR is needed to build cross tools.
.if defined(BINUTILSDISTDIR) && exists(${BINUTILSDISTDIR})
.PATH: ${BINUTILSDISTDIR}/ld
CFLAGS+= -I${BINUTILSDISTDIR}/ld
.endif

EMXFR=
EMLST=
.for _e in ${EMS}
EMXFR+=	extern ld_emulation_xfer_type ld_${_e}_emulation;
EMLST+=	&ld_${_e}_emulation,
.endfor

ldemul-list.h:
	echo "${EMXFR}" > ${.TARGET}
	echo "#define EMULATION_LIST ${EMLST} 0" >> ${.TARGET}

stringify.sed:
	ln -sf ${SRCDIR}/ld/emultempl/astring.sed ${.TARGET}

afterinstall:
	${INSTALL} -o ${LIBOWN} -g ${LIBGRP} -m ${LIBMODE} \
	    ${LDSCRIPTS:S|^|ldscripts/|} ${DESTDIR}${SCRIPTDIR}

.include <bsd.prog.mk>
$Id$ -> $FreeBSD$ 1999-08-27 19:37:10 -04:00			`# $FreeBSD$`
Restructure the binutils hierarchy somewhat in order to better support building it for variant architectures. It was already becoming clear that the former structure was too rigid and didn't scale well. The usual sort of makefile magic arranges to .include an architecture specific makefile "Makefile.${MACHINE_ARCH}" in each directory where it exists. Also, sources will be found in each subdirectory "${MACHINE_ARCH}" that exists. This is all taken care of automatically by the top level "Makefile.inc0". This all seems to work right for the i386 now. I have also converted those alpha pieces already present to the new schema as best I could. Also: change the BINDIR on the i386 to /usr/libexec/elf for "ar" and "ranlib". They are not object format independent enough to put into /usr/bin. 1998-03-11 21:55:43 -05:00
			`.include "../Makefile.inc0"`

			`.PATH: ${SRCDIR}/ld`

Clean up the formatting. 2001-10-13 21:57:19 -04:00			`PROG= ld`
			`SCRIPTDIR= /usr/libdata/ldscripts`
			`SRCS+= ldcref.c ldctor.c ldemul.c ldemul-list.h ldexp.c ldfile.c \`
			`ldgram.y ldlang.c ldlex.l ldmain.c ldmisc.c \`
			`ldver.c ldwrite.c lexsup.c mri.c`
Fixed the buildworld breakage in cross-tools caused by misuse of /usr/src/include headers. This REALLY fixes the 20010919 src/UPDATING entry. With this patch the 4.2-RELEASE box was able to survive the 5.0-CURRENT "make world". Beat over the head with this patch: obrien 2001-09-24 05:25:05 -04:00
style.Makefile(5): Use WARNS?= instead of WARNS= For this to work properly for all part is the subdirectories the WARNS assignments in Makefile.inc0 are moved to the correspondning Makefile.inc. Approved by: obrien (binutils maintainer) Tested by: make universe 2004-02-24 14:23:33 -05:00			`WARNS?= 1`
Set the SCRIPTDIR to be rooted at TOOLS_PREFIX rather than DESTDIR. (the two may be different (ie, build vs. runtime)) Allow ldscript's SEARCH_DIR do be rooted somewhere other than `/'. (in this case at TOOLS_PREFIX) These changes are most helpful during `make buildworld' so that the shared libs built in the middle of `make buildworld' are used vs. the ones in /usr/lib on the build machine. Submitted by: ru 2002-02-06 20:37:53 -05:00			`CFLAGS+= -DSCRIPTDIR=\"${TOOLS_PREFIX}/usr/libdata\"`
Change the way the version strings are handled. 2002-01-27 17:47:22 -05:00			`CFLAGS+= -DBFD_VERSION_STRING=\"${VERSION}\"`
Clean up a little bit more. 2001-10-13 21:58:18 -04:00			`CFLAGS+= -I${SRCDIR}/ld -I${SRCDIR}/bfd`
Clean up the formatting. 2001-10-13 21:57:19 -04:00			`NOSHARED?= yes`
Removed invasion into these makefiles by the "legacy" stuff; I have a better fix in the works. 2003-04-12 10:44:49 -04:00			`DPADD= ${RELTOP}/libbfd/libbfd.a`
			`DPADD+= ${RELTOP}/libiberty/libiberty.a`
Clean up the formatting. 2001-10-13 21:57:19 -04:00			`LDADD= ${DPADD}`
Restructure the binutils hierarchy somewhat in order to better support building it for variant architectures. It was already becoming clear that the former structure was too rigid and didn't scale well. The usual sort of makefile magic arranges to .include an architecture specific makefile "Makefile.${MACHINE_ARCH}" in each directory where it exists. Also, sources will be found in each subdirectory "${MACHINE_ARCH}" that exists. This is all taken care of automatically by the top level "Makefile.inc0". This all seems to work right for the i386 now. I have also converted those alpha pieces already present to the new schema as best I could. Also: change the BINDIR on the i386 to /usr/libexec/elf for "ar" and "ranlib". They are not object format independent enough to put into /usr/bin. 1998-03-11 21:55:43 -05:00			`CLEANDIRS+= ldscripts`
Pull the switch and activate our Binutils to a snapshot of the up and comming 2.10 release. 2000-05-22 04:09:42 -04:00			`CLEANFILES+= ldemul-list.h stringify.sed`
Work out the list of emulations based on the cross-architectures defined. The TARGET is now set from an included makefile. 1998-05-04 17:38:46 -04:00
Add a BINUTILSDISTDIR hook here too. 1999-11-06 17:36:40 -05:00			`# If set, BINUTILSDISTDIR is the path to a directory containing the full GNU`
			`# binutils release. FreeBSD only distributes the bits that are required to`
			`# build native architectures. BINUTILSDISTDIR is needed to build cross tools.`
Clean up the formatting. 2001-10-13 21:57:19 -04:00			`.if defined(BINUTILSDISTDIR) && exists(${BINUTILSDISTDIR})`
			`.PATH: ${BINUTILSDISTDIR}/ld`
			`CFLAGS+= -I${BINUTILSDISTDIR}/ld`
Add a BINUTILSDISTDIR hook here too. 1999-11-06 17:36:40 -05:00			`.endif`

Work out the list of emulations based on the cross-architectures defined. The TARGET is now set from an included makefile. 1998-05-04 17:38:46 -04:00			`EMXFR=`
			`EMLST=`
			`.for _e in ${EMS}`
Make it easier to change the native emulation. Tested on: alpha, i386, sparc64 2002-03-28 19:41:01 -05:00			`EMXFR+= extern ld_emulation_xfer_type ld_${_e}_emulation;`
			`EMLST+= &ld_${_e}_emulation,`
Work out the list of emulations based on the cross-architectures defined. The TARGET is now set from an included makefile. 1998-05-04 17:38:46 -04:00			`.endfor`

			`ldemul-list.h:`
Clean up the formatting. 2001-10-13 21:57:19 -04:00			`echo "${EMXFR}" > ${.TARGET}`
			`echo "#define EMULATION_LIST ${EMLST} 0" >> ${.TARGET}`
Work out the list of emulations based on the cross-architectures defined. The TARGET is now set from an included makefile. 1998-05-04 17:38:46 -04:00
Pull the switch and activate our Binutils to a snapshot of the up and comming 2.10 release. 2000-05-22 04:09:42 -04:00			`stringify.sed:`
`stringify.sed' has been replaced by `astring.sed' [on ANSI-C systems]. 2000-11-25 08:56:28 -05:00			`ln -sf ${SRCDIR}/ld/emultempl/astring.sed ${.TARGET}`
Pull the switch and activate our Binutils to a snapshot of the up and comming 2.10 release. 2000-05-22 04:09:42 -04:00
Restructure the binutils hierarchy somewhat in order to better support building it for variant architectures. It was already becoming clear that the former structure was too rigid and didn't scale well. The usual sort of makefile magic arranges to .include an architecture specific makefile "Makefile.${MACHINE_ARCH}" in each directory where it exists. Also, sources will be found in each subdirectory "${MACHINE_ARCH}" that exists. This is all taken care of automatically by the top level "Makefile.inc0". This all seems to work right for the i386 now. I have also converted those alpha pieces already present to the new schema as best I could. Also: change the BINDIR on the i386 to /usr/libexec/elf for "ar" and "ranlib". They are not object format independent enough to put into /usr/bin. 1998-03-11 21:55:43 -05:00			`afterinstall:`
Drop support for COPY, -c has been the default mode of install(1) for a long time now. Approved by: bde 2002-07-29 05:40:17 -04:00			`${INSTALL} -o ${LIBOWN} -g ${LIBGRP} -m ${LIBMODE} \`
Restructure the binutils hierarchy somewhat in order to better support building it for variant architectures. It was already becoming clear that the former structure was too rigid and didn't scale well. The usual sort of makefile magic arranges to .include an architecture specific makefile "Makefile.${MACHINE_ARCH}" in each directory where it exists. Also, sources will be found in each subdirectory "${MACHINE_ARCH}" that exists. This is all taken care of automatically by the top level "Makefile.inc0". This all seems to work right for the i386 now. I have also converted those alpha pieces already present to the new schema as best I could. Also: change the BINDIR on the i386 to /usr/libexec/elf for "ar" and "ranlib". They are not object format independent enough to put into /usr/bin. 1998-03-11 21:55:43 -05:00			`${LDSCRIPTS:S\|^\|ldscripts/\|} ${DESTDIR}${SCRIPTDIR}`

			`.include <bsd.prog.mk>`