monitor mailq

git-svn-id: https://nagiosplug.svn.sourceforge.net/svnroot/nagiosplug/nagiosplug/trunk@163 f882894a-f735-0410-b71e-b25c423dba1c

acconfig.h

@@ -24,6 +24,7 @@
 #undef PATH_TO_NTPDC
 #undef PATH_TO_LMSTAT
 #undef PATH_TO_SMBCLIENT
+#undef PATH_TO_MAILQ
 #undef PING_COMMAND
 #undef PING_PACKETS_FIRST
 #undef POSIX_STATE_DEFS

configure.in

@@ -784,6 +784,15 @@ else
 	echo "** Get ssh in order to make check_by_ssh plugin"
 fi
 
+
+AC_PATH_PROG(PATH_TO_MAILQ,mailq)
+if test -x "$PATH_TO_MAILQ"
+then
+	AC_DEFINE_UNQUOTED(PATH_TO_MAILQ,"$PATH_TO_MAILQ",[path to mailq])
+else
+	echo "** Could not find mailq or eqivalent"
+fi
+
 dnl dunno why this does not work below - use hack (kbd)
 dnl fine on linux, broken on solaris
 dnl if /bin/test -e "/proc/meminfo"

plugins-scripts/Makefile.am

@@ -6,11 +6,11 @@ VPATH=$(top_srcdir) $(top_srcdir)/plugins-scripts $(top_srcdir)/plugins-scripts/
 
 libexec_SCRIPTS = check_breeze check_disk_smb check_flexlm check_ircd \
 	check_log check_ntp check_oracle check_rpc check_sensors check_wave \
-	check_ifstatus check_ifoperstatus utils.sh utils.pm
+	check_ifstatus check_ifoperstatus check_mailq utils.sh utils.pm
 
 EXTRA_DIST=check_breeze.pl check_disk_smb.pl check_flexlm.pl check_ircd.pl \
 	check_log.sh check_ntp.pl check_oracle.sh check_rpc.pl check_sensors.sh \
-	check_ifstatus.pl check_ifoperstatus.pl check_wave.pl utils.sh.in utils.pm.in t
+	check_ifstatus.pl check_ifoperstatus.pl check_wave.pl check_mailq.pl utils.sh.in utils.pm.in t
 
 TESTS_ENVIRONMENT=perl -I $(top_builddir) -I $(top_srcdir)
 

plugins-scripts/check_mailq.pl

@@ -0,0 +1,179 @@
+#!/usr/local/bin/perl -w
+
+# check_mailq - check to see how many messages are in the smtp queue awating
+#   transmittal.  
+#
+# Initial version support sendmail's mailq command
+
+# License Information:
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+#
+############################################################################
+
+use POSIX;
+use strict;
+use Getopt::Long;
+use vars qw($opt_V $opt_h $opt_v $verbose $PROGNAME $opt_w $opt_c $opt_t $status $state $msg $msg_q );
+use lib  utils.pm;
+use utils qw(%ERRORS &print_revision &support &usage );
+
+#my $MAILQ = "/usr/bin/mailq";   # need to migrate support to utils.pm and autoconf
+
+
+sub print_help ();
+sub print_usage ();
+sub process_arguments ();
+
+$ENV{'PATH'}='';
+$ENV{'BASH_ENV'}=''; 
+$ENV{'ENV'}='';
+$PROGNAME = "check_mailq";
+
+Getopt::Long::Configure('bundling');
+$status = process_arguments();
+if ($status){
+	print "ERROR: processing arguments\n";
+	exit $ERRORS{"UNKNOWN"};
+}
+
+$SIG{'ALRM'} = sub {
+	print ("ERROR: timed out waiting for $utils::PATH_TO_MAILQ \n");
+	exit $ERRORS{"WARNING"};
+};
+alarm($opt_t);
+
+## open mailq 
+if ( defined $utils::PATH_TO_MAILQ && -x $utils::PATH_TO_MAILQ ) {
+	if (! open (MAILQ, "$utils::PATH_TO_MAILQ | " ) ) {
+		print "ERROR: could not open $utils::PATH_TO_MAILQ \n";
+		exit $ERRORS{'UNKNOWN'};
+	}
+}else{
+	print "ERROR: Could not find mailq executable!\n";
+	exit $ERRORS{'UNKNOWN'};
+}
+
+# only first line is relevant in this iteration.
+while (<MAILQ>) {
+	if (/mqueue/) {
+		print "$utils::PATH_TO_MAILQ = $_ "if $verbose ;
+		if (/empty/ ) {
+			$msg = "OK: mailq is empty";
+			$msg_q = 0;
+			$state = $ERRORS{'OK'};
+		}elsif ( /(\d+)/ ) {
+			$msg_q = $1 ;
+
+			print "msg_q = $msg_q warn=$opt_w crit=$opt_c\n" if $verbose;
+
+			if ($msg_q < $opt_w) {
+				$msg = "OK: mailq ($msg_q) is below threshold ($opt_w/$opt_c)";
+				$state = $ERRORS{'OK'};
+			}elsif ($msg_q >= $opt_w  && $msg_q < $opt_c) {
+				$msg = "WARNING: mailq is $msg_q (threshold w = $opt_w)";
+				$state = $ERRORS{'WARNING'};
+			}else {
+				$msg = "CRITICAL: mailq is $msg_q (threshold c = $opt_c)";
+				$state = $ERRORS{'CRITICAL'};
+			}
+			
+		}
+
+		last;
+	}
+	
+}
+
+close (MAILQ); 
+# declare an error if we also get a non-zero return code from mailq
+# unless already set to critical
+if ( $? ) {
+	print "stderr = $? : $! \n" if $verbose;
+	$state = $state == $ERRORS{"CRITICAL"} ? $ERRORS{"CRITICAL"} : $ERRORS{"UNKNOWN"}  ;
+	print "MAILQ error: $!\n" if $verbose;
+}
+## close mailq
+
+# Perfdata support
+print "$msg | mailq = $msg_q\n";
+exit $state;
+
+
+#####################################
+#### subs
+
+
+sub process_arguments(){
+	GetOptions
+		("V"   => \$opt_V, "version"	=> \$opt_V,
+		 "v"   => \$opt_v, "verbose"	=> \$opt_v,
+		 "h"   => \$opt_h, "help"		=> \$opt_h,
+		 "w=i" => \$opt_w, "warning=i"  => \$opt_w,   # warning if above this number
+		 "c=i" => \$opt_c, "critical=i" => \$opt_c,	  # critical if above this number
+		 "t=i" => \$opt_t, "timeout=i"  => \$opt_t 
+		 );
+
+	if ($opt_V) {
+		print_revision($PROGNAME,'$Revision$ ');
+		exit $ERRORS{'OK'};
+	}
+
+	if ($opt_h) {
+		print_help();
+		exit $ERRORS{'OK'};
+	}
+
+	if (defined $opt_v ){
+		$verbose = $opt_v;
+	}
+
+	unless (defined $opt_t) {
+		$opt_t = $utils::TIMEOUT ;	# default timeout
+	}
+
+	unless (  defined $opt_w &&  defined $opt_c ) {
+		print_usage();
+		exit $ERRORS{'UNKNOWN'};
+	}
+
+	if ( $opt_w >= $opt_c) {
+		print "Warning cannot be greater than Critical!\n";
+		exit $ERRORS{'UNKNOWN'};
+	}
+
+	return $ERRORS{'OK'};
+}
+
+sub print_usage () {
+	print "Usage: $PROGNAME [-w <warn>] [-c <crit>] [-t <timeout>] [-v verbose]\n";
+}
+
+sub print_help () {
+	print_revision($PROGNAME,'$Revision$');
+	print "Copyright (c) 2002 Subhendu Ghosh\n";
+	print "\n";
+	print_usage();
+	print "\n";
+	print "   Checks the number of messages in the mail queue\n";
+	print "   Feedback/patches to support non-sendmail mailqueue welcome\n\n";
+	print "-w (--warning)   = Min. number of messages in queue to generate warning\n";
+	print "-c (--critical)  = Min. number of messages in queu to generate critical alert ( w < c )\n";
+	print "-t (--timeout)   = Plugin timeout in seconds (default = $utils::TIMEOUT)\n";
+	print "-h (--help)\n";
+	print "-V (--version)\n";
+	print "-v (--verbose)   = deebugging output\n";
+	print "\n\n";
+	support();
+}

plugins-scripts/utils.pm.in

@@ -2,6 +2,9 @@
 # $Id$
 #
 # $Log$
+# Revision 1.5  2002/10/30 05:07:29  sghosh
+# monitor mailq
+#
 # Revision 1.4  2002/05/27 02:01:09  sghosh
 #  new var - smbclient
 #
@@ -31,6 +34,7 @@ $PATH_TO_NTPDATE = "@PATH_TO_NTPDATE@" ;
 $PATH_TO_NTPDC   = "@PATH_TO_NTPDC@" ;
 $PATH_TO_LMSTAT  = "@PATH_TO_LMSTAT@" ;
 $PATH_TO_SMBCLIENT = "@PATH_TO_SMBCLIENT@" ;
+$PATH_TO_MAILQ   = "@PATH_TO_MAILQ@";
 
 ## common variables
 $TIMEOUT = 15;