This test brought by commit 8ed1e91efd ("MEDIUM: lb-chash: add directive
hash-preserve-affinity") seems to have hit a limitation of what can be
expressed in vtc, as it would be desirable to have one server response
release two clients at once but the various attempts using barriers
have failed so far. The test seems to work fine locally but still fails
almost 100% of the time on the CI, so it remains timing dependent in
some ways. Tests have been done with nbthread 1, pool-idle-shared off,
http-reuse never (since always fails locally) etc but to no avail. Let's
just mark it broken in case we later figure another way to fix it. It's
still usable locally most of the time, though.
When using hash-based load balancing, requests are always assigned to
the server corresponding to the hash bucket for the balancing key,
without taking maxconn or maxqueue into account, unlike in other load
balancing methods like 'first'. This adds a new backend directive that
can be used to take maxconn and possibly maxqueue in that context. This
can be used when hashing is desired to achieve cache locality, but
sending requests to a different server is preferable to queuing for a
long time or failing requests when the initial server is saturated.
By default, affinity is preserved as was the case previously. When
'hash-preserve-affinity' is set to 'maxqueue', servers are considered
successively in the order of the hash ring until a server that does not
have a full queue is found.
When 'maxconn' is set on a server, queueing cannot be disabled, as
'maxqueue=0' means unlimited. To support picking a different server
when a server is at 'maxconn' irrespective of the queue,
'hash-preserve-affinity' can be set to 'maxconn'.
This is the introduction of "minsize-req" and "minsize-res".
These two options allow you to set the minimum payload size required for
compression to be applied.
This helps save CPU on both server and client sides when the payload does
not need to be compressed.
It was proved in GH #2875 that the regtest was broken, at least for the
server-side abnsz, as the connect() was not performed using the proper
family, which results in kernel refusing to perform the call, while the
reg-test actually succeeds.
Indeed, in the test we used vtest client to connect to haproxy, which
then routed the request to another haproxy instance listening on an
abnsz socket, and this last haproxy was the one to answer the http
request.
As we only used "rxresp" in vtest client, the test succeeded with empty
responses, which was the case due to the server connection failing on the
first haproxy process.
This reverts commit 0b9a75e878.
Thanks to the previous fixes ("REGTESTS: Fix truncated.vtc to send 0-CRLF" and
"BUG/MINOR: mux-h2: Properly handle full or truncated HTX messages on shut"),
this script can be reenabled for FreeBSD.
We never succeed to make the truncated.vtc reg-test work constantly on
the Cirrus FreeBSD CI.
Let's exclude it from the FreeBSD tests so the CI don't break randomly.
A better name was found for the option implemented in ec74438
("MINOR: hlua: add option to preserve bool type from smp to lua")
Indeed, "tune.lua.preserve-smp-bool {on | off}" wasn't explicit enough
nor did it encourage the adoption of the new "fixed" behavior (vs
historical behavior which is now considered as a bug).
Thus it becomes "tune.lua.bool-sample-conversion { normal | pre-3.1-bug }"
which actively encourage users to switch the new behavior after having
patched in-use Lua script if needed. From a technical point of view,
the logic remains the same, as the option currently defaults to
"pre-3.1-bug" to prevent script breakage, and a warning is emitted if
the option isn't set explicily and Lua is used.
Documentation and regtests were updated.
Must be backported in 3.1 with ec74438 and f2838f5 ("REGTESTS: fix
lua-based regtests using tune.lua.smp-preserve-bool")
Because of the previous commit, configs making use of lua script without
setting "tune.lua.smp-preserve-bool" explicitly now raise a warning.
However, since 6f746af91 ("REGTESTS: use -dW by default on every
reg-tests"), regtests are not allowed to raise warnings anymore.
Because of this the CI now fails for every tests that relies on Lua.
To fix this, let's explicitly set the "tune.lua.smp-preserve-bool" for
all tests involving Lua. Here we set the value to "on" because we know
it is safe to do so, and this way it will be future-proof.
If ec7443827 ("MINOR: hlua: add option to preserve bool type from smp to
lua") is backported, then this patch must be backported with it (if it
is not trivial to backport, then simply follow this rule: grep for
"lua-load" in reg-tests directory, then for each match, make sure to set
the tune.smp-preserve-bool tunable in the global section.
User tried to update a PEM, generated automatically. Part of this PEM has LF
line endings, and another part (CA certificate), added by some API, has CRLF
line endings. This has revealed a bug in cli_snd_buf(), see more
details in issue GitHUB #2818. So, let's add an example of such PEM in our
SSL regtest.
Regtest ocsp_auto_update.vtc used to fail here on FreeBSD because the
base64 utility was not installed by default. Once installed it would
still fail because the utility doesn't support -w to wrap lines. Since
the regtest already relies on openssl base64 for a few commands, let's
just rely on it for the other ones. The only limitation is that openssl
freezes on lines longer than 1024 bytes, and doesn't seem to process more
than 255 chars at once, which might be the reason for using base64 -w 1000
in the first place (the script was probably tested like this). Instead
sed is efficient at wrapping long lines and does the job pretty well.
The output was fixed at 72 chars so that the output is also readable on
a terminal for debugging.
The regtest4be_1srv_smtpchk_httpchk_layer47errors.vtc fails on musl
because it reports "Network unreachable" for -EUNREACH while the
check matches "Network is unreachable" as on other OSes. Let's just
replace " is" with ".*". It now works on both glibc and musl.
-Ws on VTest is not working correctly for an unknown reason, the polling
of the NOTIFY_SOCKET seems to timeout, and VTest never receives the
READY message.
This patch disables the reg-tests using -Ws on OS X.
The -W mode implemented in VTest is not reliable anymore, because VTest
waits for the pidfile to be created. But with the new master-worker
mode, this file is created long before haproxy is ready. This can lead
to the test being started too soon, and failing from time to time.
The -Ws option allows to wait for haproxy to deliver a message to VTest
once it is ready.
Every reg-test now runs without any warning, so let's acivate -dW by
default so the new ones will inheritate the option.
This patch reverts 9d511b3c ("REGTESTS: enable -dW on almost all tests
to fail on warnings") and adds -dW in the default HAPROXY_ARGS of
scripts/run-regtests.sh instead.
As master parses now expose-deprecated-directives option, let's emit warning
about deprecated 'progam' section only in case, if this option wasn't set in
the 'global' section. This allows to people, who don't prefer to remove the
'program' section immediately to continue to start the process in zero-warning
mode.
Adjust the warning message accordingly and mcli_start_progs.vtc test. As
expose-deprecated-directives option is a 'global' section keyword, this section
must always precede any 'program' section, if users still continue to keep
'program' section.
This doesn't need to be backported, as related to the latest changes in
the master-worker architecture.
Now that warnings were almost all removed, let's enable zero-warning
via -dW. All tests were adjusted, but two:
- mcli/mcli_start_progs.vtc:
the programs section currently cannot be silenced
- stats/stats-file.vtc:
the warning comes from the stats file itself on comment lines.
All other ones are now OK.
No less than 30 tests were missing timeouts, preventing them from being
started with zero-warning. Since they were not supposed to trigger, they
have been set to 30s so as never to trigger, and now they do not produce
any warning anymore.
This reg-test uses req.len in an HTTP backend. It does work but emits a
warning suggesting that this is ignored, so most likely its days are
counted now. Let's just use req.hdrs,length instead.
The following rules are triggering warnings about content-type being
ignored:
http-request return content-type "text/plain" if { path /def-4 }
http-request return content-type "text/plain" file /dev/null hdr "x-custom-hdr" "%[url]" if { path /empty-file }
Annoyingly, the content-type is mandatory when the file is not empty,
that might be something to revisit in the future to relax at least one
of the rules so that the config doesn't strictly require to know the
file contents upfront.
Two tests were using "timeout {client,server} 1" to forcefully trigger
them, but a forthcoming patch will emit a warning for such small unitless
values, so let's be explicit about the unit.
The regtest "h1or2_to_h1c" contains both an allow and a deny at the end,
likely to help catch rare bugs. But this triggers a warning that we can
silence by placing a condition on the penultimate rule.
When an abstract unix socket is bound by HAProxy (using "abns@" prefix),
NUL bytes are appended at the end of its path until sun_path is filled
(for a total of 108 characters).
Here we add an alternative to pass only the non-NUL length of that path
to connect/bind calls, such that the effective path of the socket's name
is as humanly written. This may be useful to interconnect with existing
softwares that implement abstract sockets with this logic instead of the
default haproxy one.
This is achieved by implementing the "abnsz" socket prefix (instead of
"abns"), which stands for "zero-terminated ABNS". "abnsz" prefix may be
used anywhere "abns" is. Internally, haproxy uses the custom socket
family (AF_CUST_ABNS vs AF_CUST_ABNSZ) to differentiate default abns
sockets from zero-terminated ones.
Documentation was updated and regtest was added.
Fixes GH issues #977 and #2479
Co-authored-by: Aurelien DARRAGON <adarragon@haproxy.com>
When vtest starts haproxy process, it loops until the moment, when haproxy
pidfile is created. When pidfile is created, vtest considers that haproxy
process is ready and it starts to perform test commands, in particular, it
connects to CLI. It's not very reliable approach to base the check of the
process readiness on the PID file. After master-worker architecture
refactoring pidfile is created in the early init stage, but master and worker
are not yet finished its initialization routines. So, all mcli tests and some
tests where we sent commands to CLI start to fail regularly.
In vtest at the moment there is no any other approach to check that the
process is really ready. So let's add a delay 0.1s before connecting to CLI in
all mcli tests and in acl_cli_spaces test.
This test issues a reload over the master CLI, but it is totally
possible that the master has not yet finished starting up the master
CLI when the command is issued, resulting in a failure. This was much
more visible on the new master-worker model, but definitely affects the
old one and could be the reason for this test to occasionally fail on
the CI.
Now that 'do-log' action may be used for all existing action contexts,
let's add some tests in reg-tests/log/log_profile.vtc to ensure it works
as expected. quic-ini is not tested as it may not be builtin depending on
build options..
Support for headers and body hidden in the version for the "option httpchk"
directive was removed. However a Host header is mandatory for HTTP/1.1
requests and some servers may return an error if it is not set. For now, to
add it, an "http-check send" rule must be added. But it is not really handy
to use an extra config line for this purpose.
So now, it is possible to set the host header value, a log-format string, as
extra argument to "option httpchk" directive. It must be the fourth argument:
option httpchk GET / HTTP/1.1 www.srv.com
While this patch is not a bug fix, it is simple enough to be backported if
necessary. On 2.9 and older, lf_init_expr() does not exist and LIST_INIT() must
be used instead.
Now that proxy "log-steps" keyword was implemented and is usable since
("MEDIUM: log: consider log-steps proxy setting for existing log origins")
let's add some tests for it in reg-tests/log/log_profile.vtc.
Add missing wait for Slg4 introduced in f8299bc ("MINOR: log: "drop"
support for log-profile steps"), and missing barrier increase due to
the use of barrier sync, which could have resulted in the regtest
being timing-sentive and thus less-reliable.
Also, the "error" check in Slg4 wasn't even considered because it is
emitted by frontend 4, not frontend 2..
No backport needed unless f8299bc is.
With these options, it is possible to accept some invalid messages that may
considered as unsafe and may result as vulnerabilities. The naming is not
explicit enough on this point. These option must really be considered as
dangerous and only used as a temporary workaround. Unfortunately, when used,
it is probably because there are some legacy and unsupported applications in
place. Nevermind. The documentation warns about the use of these
options. Now the name of the options itself is a warning.
So now, "accept-invalid-http-request" and "accept-invalid-http-response"
options are deprecated and replaced by
"accept-unsafe-violations-in-http-request" and
"accept-unsafe-violations-in-http-response" options.
Commit d6c4ed9a96 ("REGTESTS: h1/h2: Update script testing H1/H2
protocol upgrades") introduced a 0.5 second delay which is higher
than those of most other tests (usually 0.05 or 0.2) and triggers
timeouts on my side. Let's just shorten it to 0.2 since its goal
is only to send data separately.
Note: maybe a barrier approach would be possible, though not
studied.
This test has an expect rule for syslog that looks for [cC]D, to
indicate a client abort or timeout during the data phase. The purpose
was to say that when it fails it must be this, but the very low timeout
(1ms) still makes it prone to succeeding if the machine is highly loaded.
This has become more visible since commit e8b1ad4c2b ("BUG/MEDIUM: clock:
also update the date offset on time jumps") because the clock drift
adjustments are more systematic. Since this commit, running 50 such tests
at twice more than the number of CPUs in parallel is sufficient to yield
errors due to some lines appearing as succeeding:
make reg-tests -- --j $((($(nproc)+1)*2)) --vtestparams -n50 reg-tests/log/wrong_ip_port_logging.vtc
It was observed that pauses up to 300ms were observed in epoll_wait() in
such circumstances, which were properly fixed by the time drift detection..
Another approach would consist in increasing the permitted margin during
which we don't fix the clock drift but that would not be logical since the
base time had really been awaited for.
This should be backported to all stable releases since the commit above
will trigger the issue more often.
"http-messaging/protocol_upgrade.vtc" script was updated to test upgrades
for requests with a payload. It should fail when the request is sent to a H2
server. When sent to a H1 server, it should succeed, except if the server
replies before the end of the request.
It is now possible to use "drop" keyword for "on" lines under a
log-profile section to specify that no log at all should be emitted for
the specified step (setting an empty format was not sufficient to do so
because only the log payload would be empty, not the log header, thus the
log would still be emitted).
It may be useful to selectively disable logging at specific steps for a
given log target (since the log profile may be set on log directives):
log-profile myprof
on request format "blabla" sd "custom sd"
on response drop
New testcase was added to reg-tests/log/log_profiles.vtc
A recent fix broke the pipelined command on the master CLI, this
reg-tests implement a simple test that allow to check its right
behavior.
This could be backported as far as 2.6.
This commit prevents forwarding of an HTTP/2 Extended CONNECT when "h2c"
or "h2" token is set as targetted protocol. Contrary to the previous
commit which deals with HTTP/1 mux, this time the request is rejected
and a RESET_STREAM is reported to the client.
This must be backported up to 2.4 after a period of observation.
haproxy supports tunnel establishment through HTTP Upgrade mechanism.
Since the following commit, extended CONNECT is also supported for
HTTP/2 both on frontend and backend side.
commit 9bf957335e
MEDIUM: mux_h2: generate Extended CONNECT from htx upgrade
As specified by HTTP/2 rfc, "h2c" can be used by an HTTP/1.1 client to
request an upgrade to HTTP/2. In haproxy, this is not supported so it
silently ignores this. However, Connection and Upgrade headers are
forwarded as-is on the backend side.
If using HTTP/1 on the backend side and the server supports this upgrade
mechanism, haproxy won't be able to parse the HTTP response. If using
HTTP/2, mux backend tries to incorrectly convert the request to an
Extended CONNECT with h2c protocol, which may also prevent the response
to be transmitted.
To fix this, flag HTTP/1 request with "h2c" or "h2" token in an upgrade
header. On converting the header list to HTX, the upgrade header is
skipped if any of this token is present and the H1_MF_CONN_UPG flag is
removed.
This issue can easily be reproduced using curl --http2 argument to
connect to an HTTP/1 frontend.
This must be backported up to 2.4 after a period of observation.
Add a reg-test which test the completion of the issuers-chain-path
keyword
Note that it could be interesting to have the loading of a .ocsp
combined with this, but our pki for OCSP tests lacks
the SubjectKeyIdentifier extensions.
The SPOP health-checks are now performed using the SPOP multiplexer. This
will be fixed later, but for now, it is considered as a L4 health-check and
no specific status code is reported. It means the corresponding vtest script
is marked as broken for now.
Functionnaly speaking, the same is performed. A connection is opened, a
HELLO frame is sent to the agent and we wait for the HELLO frame from the
agent in reply. But only L4OK, L4KO or L4TOUT will be reported.
The related issue is #2502.
Prerequisites are now available in AWS-LC, so we can enable these
reg-tests.
With this patch, aws-lc only has 5 reg-tests that are not working:
- reg-tests/ssl/ssl_reuse.vtc: stateful session resumption is only supported with TLSv1.2
- reg-tests/ssl/ssl_curve_name.vtc: function to extract curve name is not available
- reg-tests/ssl/ssl_errors.vtc: errors are not the same than OpenSSL
- reg-tests/ssl/ssl_dh.vtc: AWS-LC does not support DH
- reg-tests/ssl/ssl_curves.vtc: not working correctly
Which means most of the features are working correctly.
Since patch fde517b ("REGTESTS: wolfssl: temporarly disable some failing
reg-tests") some 'feature cmd' lines have an extra quotation mark, so
they were disable in every cases.
Must be backported to 2.9.
Try to cover some common use-cases for "log-profile" feature. The tests
mainly focus on log-profile section declaration, and testing the behavior
of logformat / log-tag overriding capabilities.
For now, the use of log-profiles is somewhat limited because we lack
the ability to explicitly trigger the log building process at specific
steps during the stream handling. Indeed, for now we rely on
"option logasap" and proxy log-format string content "hacks" to force
the log emission at some specific steps, thus more tests should be added
over the time, when new mechanisms allowing the emission of logs at
expected processing steps will be added, or if new keywords are added to
the log-profile section.
This test requires versions >= 3.0-dev1
Add new test cases in http_reuse_conn_hash vtest. Ensure new server
parameter "pool-conn-name" is used as expected for idle connection name,
both alone and mixed with a SNI.
There's a warning being reported in this reg test in the detailed startup
logs because of "log global" and "option httplog" while there's no global
section hence no logger. Let's just drop both options since they're not
relevant to this test.
As stated in RFC3986, for an absolute-form URI, an empty path should be
normalized to a path of "/". This is part of scheme based normalization
rules. This kind of normalization is already performed for default ports. So
we might as well deal with the case of empty path.
The associated reg-tests was updated accordingly.
This patch should fix the issue #2573. It may be backported as far as 2.4 if
necessary.
This reverts commits 885e40494c and
dff9807188.
We decided to spend some time to refactor and rationnalize the SPOE for the
3.1. Thus there is no reason to still consider it as deprecated for the
3.0. Compatibility between the both versions will be maintained.
See #2502 for more info.
In commit 55e9e9591 ("MEDIUM: ssl: temporarily load files by detecting
their presence in crt-store"), ssl_sock_load_pem_into_ckch() was
replaced by ssl_sock_load_files_into_ckch() in the crt-store loading.
But the side effect was that we always try to autodetect, and this is
not what we want. This patch reverse this, and add specific code in the
crt-list loading, so we could autodetect in crt-list like it was done
before, but still try to load files when a crt-store filename keyword is
specified.
Example:
These crt-list lines won't autodetect files:
foobar.crt [key foobar.key issuer foobar.issuer ocsp-update on] *.foo.bar
foobar.crt [key foobar.key] *.foo.bar
These crt-list lines will autodect files:
foobar.pem [ocsp-update on] *.foo.bar
foobar.pem
Update the ocsp-update tests for the recent changes:
- Incompatibilities check string changed to match the crt-store one
- The "good configurations" are not good anymore because the
ckch_conf_cmp() does not compare anymore with a global value.
crt-store is maint to be stricter than your common crt argument on a
bind line, and is supposed to be a declarative format.
However, since the 'ocsp-update' was migrated from ssl_conf to
ckch_conf, the .issuer file is not autodetected anymore when adding a
ocsp-update keyword in a crt-list file, which breaks retro-compatibility.
This patch is a quick fix that will disappear once we are able to be
strict on a crt-store and autodetect on a crt-list.
Remove the "ocsp-update" keyword handling from the crt-list.
The code was made as an exception everywhere so we could activate the
ocsp-update for an individual certificate.
The feature will still exists but will be parsed as a "crt-store"
keyword which will still be usable in a "crt-list". This will appear in
future commits.
This commit also disable the reg-tests for now.
As stated in issue #2565, checks on the request target during H1 message
parsing are not good enough. Invalid paths, not starting by a slash are in
fact parsed as authorities. The same error is repeated at the sample fetch
level. This last point is annoying because routing rules may be fooled. It
is also an issue when the URI or the Host header are updated.
Because the error is repeated at different places, it must be fixed. We
cannot be lax by arguing it is the server's job to accept or reject invalid
request targets. With this patch, we strengthen the checks performed on the
request target during H1 parsing. Idea is to reject invalid requests at this
step to be sure it is safe to manipulate the path or the authority at other
places.
So now, the asterisk-form is only allowed for OPTIONS and OTHER methods.
This last point was added to not reject the H2 preface. In addition, we take
care to have only one asterisk and nothing more. For the CONNECT method, we
take care to have a valid authority-form. All other form are rejected. The
authority-form is now only supported for CONNECT method. No specific check
is performed on the origin-form (except for the CONNECT method). For the
absolute-form, we take care to have a scheme and a valid authority.
These checks are not perfect but should be good enough to properly identify
each part of the request target for a relative small cost. But, it is a
breaking change. Some requests are now be rejected while they was not on
older versions. However, nowadays, it is most probably not an issue. If it
turns out it's really an issue for legitimate use-cases, an option would be
to supports these kinds of requests when the "accept-invalid-http-request"
option is set, with the consequence of seeing some sample fetches having an
unexpected behavior.
This patch should fix the issue #2665. It MUST NOT be backported. First
because it is a breaking change. And then because by avoiding backporting
it, it remains possible to relax the parsing with the
"accept-invalid-http-request" option.
the ocsp_compat_check.vtc reg-test is difficult to debug given than the
haproxy output is piped in `grep -q`.
This patch helps by showing the haproxy output as well as the return
code.
Previously check_config_validity() had its own curproxy variable. This
resulted in the acl() sample fetch being unable to determine which
proxy was in use when used from within log-format statements. This
change addresses the issue by having the check_config_validity()
function use the global variable instead.
Define a simple regtest to check stats-file loading on startup. A sample
stats-file is written with some invalid values which should be silently
ignored.
A bug related to vary and the 'accept-encoding' header was fixed in
"BUG/MEDIUM: cache: Vary not working properly on anything other than
accept-encoding". This patch adds tests specific to this bug.
Instead of relying on the http client logs for synchronization, use the
specific OCSP logs that are emitted after the newly updated response is
inserted in the tree. This removes the need to wait between the syslog
reception and the insertion that was managed thanks to "sleep" calls.
This regtest can now be switched back to "devel" type instead of "slow".
This commit is the first one of a serie which adjust naming convention
for stats module. The objective is to remove ambiguity and better
reflect how stats are implemented, especially since the introduction of
stats module.
This patch renames elements related to proxies statistics. One of the
main change is to rename ST_F_* statistics indexes prefix with the new
name ST_I_PX_*. This remove the reference to field which represents
another concept in the stats module. In the same vein, global
stat_fields variable is renamed metrics_px.
Introduced in:
dfb1cea69 REGTESTS: promex: Adapt script to be less verbose
36d936dd1 REGTESTS: write a full reverse regtest
b57f15158 REGTESTS: provide a reverse-server test with name argument
f0bff2947 REGTESTS: provide a reverse-server test
see also:
fbbbc33df REGTESTS: Do not use REQUIRE_VERSION for HAProxy 2.5+
There were two occurrences of the seventh test. I don't know really why, but
this triggered a VTC error:
---- h7 Assert error in _assert_VSB_state(), lib/vsb.c line 104: Condition((s->s_flags & 0x00020000) == state) not true. Errno=0 Success
Renumbering tests fixes the script.
Add tests that focus on the incompatibility checks on ocsp-update mode.
This test will only call "haproxy -c" on multiple configurations that
combine the crt-list 'ocsp-update' option and the global
'tune.ssl.ocsp-update.mode'.
In http_7239_extract_{ipv4,ipv6}, we declare a local buffer in order to
use inet_pton() since it requires a valid destination argument (cannot be
NULL). Then, if the caller provided <ip> argument, we copy inet_pton()
result (from local buffer to <ip>).
In fact when the caller provides <ip>, we may directly use <ip> as
inet_pton() dst argument to avoid an useless copy. Thus the local buffer
is only relevant when the user doesn't provide <ip>.
While at it, let's add a missing testcase for the rfc7239_n2nn converter
(to check that http_7239_extract_ipv4() with <ip> provided works properly)
This could be backported in 2.8 with b2bb925 ("MINOR: proxy/http_ext:
introduce proxy forwarded option")
It is the first deprecated directive exposed via the
'expose-deprecated-directives' global option. This way, it is possible to
silent the warning about the SPOE uses.
This patch reverts 2 fixes that were made in an attempt to fix the
ocsp-update feature used with the 'commit ssl cert' command.
The patches crash the worker when doing a soft-stop when the 'set ssl
ocsp-response' command was used, or during runtime if the ocsp-update
was used.
This was reported in issue #2462 and #2442.
The last patch reverted is the associated reg-test.
Revert "BUG/MEDIUM: ssl: Fix crash when calling "update ssl ocsp-response" when an update is ongoing"
This reverts commit 5e66bf26ec.
Revert "BUG/MEDIUM: ocsp: Separate refcount per instance and per store"
This reverts commit 04b77f84d1b52185fc64735d7d81137479d68b00.
Revert "REGTESTS: ssl: Add OCSP related tests"
This reverts commit acd1b85d3442fc58164bd0fb96e72f3d4b501d15.
"get var" on the CLI was also missing an LF, and the vtest as well, so
that fixing only the code breaks the vtest. This must be backported to
2.4 as the issue was brought with commit c35eb38f1d ("MINOR: vars/cli:
add a "get var" CLI command to retrieve global variables").
We now update the session's tracked counters with the observed glitches.
In order to avoid incurring a high cost, e.g. if many small frames contain
issues, we batch the updates around h2_process_demux() by directly passing
the difference. Indeed, for now all functions that increment glitches are
called from h2_process_demux(). If that were to change, we'd just need to
keep the value of the last synced counter in the h2c struct instead of the
stack.
The regtest was updated to verify that the 3rd client that does not cause
issue still sees the counter resulting from client 2's mistakes. The rate
is also verified, considering it shouldn't fail since the period is very
long (1m).
The 'set ssl cert' command was failing because of empty lines in the
contents of the PEM file used to perform the update.
We were also missing the issuer in the newly created ckch_store, which
then raised an error when committing the transaction.
First, checks on the resolver scope were added. Then, because of the recent
changes, the logs emitted by vtest are now too big and this makes the script
fails. So tests on NaN values are now performed on a smaller request. This
reduces enough the logs to pass.
In fact some checks were removed
Now with fc_glitches and bc_glitches we can retrieve the number of
detected glitches on a front or back connection. On the backend it
can indicate a bug in a server that may induce frequent reconnections
hence CPU usage in TLS reconnections, and on the frontend it may
indicate an abusive client that may be trying to attack the stack
or to fingerprint it. Small non-zero values are definitely expected
and can be caused by network glitches for example, as well as rare
bugs in the other component (or maybe even in haproxy). These should
never be considered as alarming as long as they remain low (i.e.
much less than one per request). A reg-test is provided.
The new global keywords "http-err-codes" and "http-fail-codes" allow to
redefine which HTTP status codes indicate a client-induced error or a
server error, as tracked by stick-table counters. This is only done
globally, though everything was done so that it could easily be extended
to a per-proxy mechanism if there was a real need for this (but it would
eat quite more RAM then).
A simple reg-test was added (http-err-fail.vtc).
Willy made me realize that tree-based matching may also suffer from
out-of-order mapfile loading, as opposed to what's being said in
b546bb6d ("BUG/MINOR: map: list-based matching potential ordering
regression") and the associated REGTEST.
Indeed, in case of duplicated keys, we want to be sure that only the key
that was first seen in the file will be returned (as long as it is not
removed). The above fix is still valid, and the list-based match regtest
will also prevent regressions for tree-based match since mapfile loading
logic is currently match-type agnostic.
But let's clarify that by making both the code comment and the regtest
more precise.
As shown in "BUG/MINOR: map: list-based matching potential ordering
regression", list-based matching types such as dom are affected by the
order in which elements are loaded from the map.
Since this is historical behavior and existing usages depend on it, we
add a test to prevent future regressions.
Previous patch fixed a regression which caused some config with
attach-srv to be rejected if the rule was declared before the target
server itself. To better detect this kind of error, mix the declaration
order in the corresponding regtest.
Previously an expression like:
path,word(2,/) -m found
always returned `true`.
Bug exists since the `word` converter exists. That is:
c9a0f6d023
The same bug was previously fixed for the `field` converter in commit
4381d26edc.
The fix should be backported to 1.6+.
Mark the reverse HTTP feature as experimental. This will allow to adjust
if needed the configuration mechanism with future developments without
maintaining retro-compatibility.
Concretely, each config directives linked to it now requires to specify
first global expose-experimental-directives before. This is the case for
the following directives :
- rhttp@ prefix uses in bind and server lines
- nbconn bind keyword
- attach-srv tcp rule
Each documentation section refering to these keywords are updated to
highlight this new requirement.
Note that this commit has duplicated on several places the code from the
global function check_kw_experimental(). This is because the latter only
work with cfg_keyword type. This is not adapted with bind_kw or
action_kw types. This should be improve in a future patch.
http_reuse_be_transparent.vtc relies on "transparent" proxy option which
is guarded by the USE_TPROXY ifdef at multiple places in the code.
Hence, executing the above test when haproxy was compiled without the
USE_TPROXY feature (ie: generic target) results in this kind of error:
*** h1 debug|[NOTICE] (1189756) : haproxy version is 2.9-dev1-8fc21e-807
*** h1 debug|[NOTICE] (1189756) : path to executable is ./haproxy
*** h1 debug|[ALERT] (1189756) : config : parsing [/tmp/vtc.1189751.18665e7b/h1/cfg:11]: option 'transparent' is not supported due to build options.
*** h1 debug|[ALERT] (1189756) : config : Error(s) found in configuration file : /tmp/vtc.1189751.18665e7b/h1/cfg
Now we skip the regtest if TPROXY feature is missing.
After giving it some thought, it could pretty well happen that other
protocols benefit from the sticky algorithm that some used to emulate
using a "stick-on int(0)" or things like this previously. So better
rename it to "sticky" right now instead of having to keep that "log-"
prefix forever. It's still limited to logs, of course, only the algo
is renamed in the config.
I've had this test here never committed over the last 2.5 years, that
works fine and I didn't notice it was not part of the tree. It makes a
server return odd-sized chunked responses with short pauses between half
of thems and verifies they're not truncated on the client. It may detect
eventually state machine breakages, so better commit it.
"log-balance" directive was recently introduced to configure the
balancing algorithm to use when in a log backend. However, it is
confusing and it causes issues when used in default section.
In this patch, we take another approach: first we remove the
"log-balance" directive, and instead we rely on existing "balance"
directive to configure log load balancing in log backend.
Some algorithms such as roundrobin can be used as-is in a log backend,
and for log-only algorithms, they are implemented as "log-$name" inside
the "backend" directive.
The documentation was updated accordingly.
Since the reload is now synchronous over the master CLI, try to reload
with it. This was a problem before with the signals because it wasn't
possible to wait for the end of the reload before sending the requests.
This activate again this test, we will see if it's more stable or we
will deactivate it again..
We now take care to properly handle the abortonclose close option if it is
set on the backend and be sure we ignore it when it is set on the frontend
(inherited from the defaults section).
Current version of VTest tests the output of "haproxy -c" instead of the
return code. Since we don't output anymore when the configuration is
valid, this broke the test. (a06f621).
This fixes the issue by adding the -V when doing a -conf-OK. But this
must fixed in VTest.
To follow-up the implementation of the new set-proxy-v2-tlv-fmt
keyword in the server, the connection is updated to use the previously
allocated TLVs. If no value was specified, we send out an empty TLV.
As the feature is fully working with this commit, documentation and a
test for the server and default-server are added as well.
This new fetcher can be used to extract the list of cookie names from
Cookie request header or from Set-Cookie response header depending on
the stream direction. There is an optional argument that can be used
as the delimiter (which is assumed to be the first character of the
argument) between cookie names. The default delimiter is comma (,).
Note that we will treat the Cookie request header as a semi-colon
separated list of cookies and each Set-Cookie response header as
a single cookie and extract the cookie names accordingly.
Signature algorithms allows us to select the right certificates when
using TLSv1.3. This patch update the ssl_crt-list_filters.vtc regtest to
do more precise testing with TLSv1.3 in addition to TLSv1.2.
This allow us to test correctly bug #2300.
It could be backported to 2.8 with the previous fix for certificate
selection.
Method now returns the content of Json Arrays, if it is specified in
Json Path as String. The start and end character is a square bracket. Any
complex object in the array is returned as Json, so that you might get Arrays
of Array or objects. Only recommended for Arrays of simple types (e.g.,
String or int) which will be returned as CSV String. Also updated
documentation and fixed issue with parenthesis and other changes from
comments.
This patch was discussed in issue #2281.
Signed-off-by: William Lallemand <wlallemand@haproxy.com>
The maxconn keyword is not used anymore for reverse HTTP bind. It has
been replaced recently by the new keyword nbconn. As it's default value
is 1, it can be safely removed from the regtest without affecting its
behavior.
mux-to-mux fast-forwarding will be added. To avoid mix with the splicing and
simplify the commits, the kernel splicing support is removed from the
stconn. CF_KERN_SPLICING flag is removed and the support is no longer tested
in process_stream().
In the stconn part, rcv_pipe() callback function is no longer called.
Reg-tests scripts testing the kernel splicing are temporarly marked as
broken.
This regtest declares and uses 3 log backends, one of which has TCP syslog
servers declared in it and other ones UDP syslog servers.
Some tests aims at testing log distribution reliability by leveraging the
log-balance hash algorithm with a key extracted from the request URL, and
the dummy vtest syslog servers ensure that messages are sent to the
correct endpoint. Overall this regtest covers essential parts of the log
message distribution and log-balancing logic involved with log backends.
It also leverages the log-forward section to perform the TCP->UDP
translation required to test UDP endpoints since vtest syslog servers
work in UDP mode.
Finally, we have some tests to ensure that the server queuing/dequeuing
and failover (backup) logics work properly.
This patch add a hash of the Origin header to the cache's secondary key.
This enables to manage store responses that have a "Vary: Origin" header
in the cache when vary is enabled.
This cannot be considered as a means to manage CORS requests though, it
only processes the Origin header and hashes the presented value without
any form of URI normalization.
This need was expressed by Philipp Hossner in GitHub issue #251.
Co-Authored-by: Philipp Hossner <philipp.hossner@posteo.de>
in random-forwarding.vtc script, adding "Content-Lnegth; 0" header in the
successful response to the CONNECT request is invalid but it may also lead
to wrong check on the response. "rxresp" directive don"t handle CONNECT
response. Thus "-no_obj" must be added instead, to be sure the payload won't
be retrieved or expected.
Added set-timeout for frontend side of session, so it can be used to set
custom per-client timeouts if needed. Added cur_client_timeout to fetch
client timeout samples.
Prior to this commit, converter "bytes" takes only integer values as
arguments. After this commit, it can take variable names as inputs.
This allows us to dynamically determine the offset/length and capture
them in variables. These variables can then be used with the converter.
Example use case: parsing a token present in a request header.
This patch implements the 'curves' keyword on server lines as well as
the 'ssl-default-server-curves' keyword in the global section.
It also add the keyword on the server line in the ssl_curves reg-test.
These keywords allow the configuration of the curves list for a server.
Based on the new, generic allocation infrastructure, a new sample
fetch fc_pp_tlv is introduced. It is an abstraction for existing
PPv2 TLV sample fetches. It takes any valid TLV ID as argument and
returns the value as a string, similar to fc_pp_authority and
fc_pp_unique_id.
Bug was introduced by commit 26654 ("MINOR: ssl: add "crt" in the
cert_exts array").
When looking for a .crt directly in the cert_exts array, the
ssl_sock_load_pem_into_ckch() function will be called with a argument
which does not have its ".crt" extensions anymore.
If "ssl-load-extra-del-ext" is used this is not a problem since we try
to add the ".crt" when doing the lookup in the tree.
However when using directly a ".crt" without this option it will failed
looking for the file in the tree.
The fix removes the "crt" entry from the array since it does not seem to
be really useful without a rework of all the lookups.
Should fix issue #2265
Must be backported as far as 2.6.
This test instantiates two haproxy instances :
* first one uses a reverse server with two bind pub and priv
* second one uses a reverse bind to initiate connection to priv endpoint
On startup, only first haproxy instance is up. A client send a request
to pub endpoint and should receive a HTTP 503 as no connection are
available on the reverse server.
Second haproxy instance is started. A delay of 3 seconds is inserted to
wait for the connection between the two LBs. Then a client retry the
request and this time should receive a HTTP 200 reusing the bootstrapped
connection.
This regtest is similar to the previous one, except the optional name
argument is specified.
An extra haproxy instance is used as a gateway for clear/TLS as vtest
does not support TLS natively.
A first request is done by specifying a name which does not match the
idle connection SNI. This must result in a HTTP 503. Then the correct
name is used which must result in a 200.
Test support for reverse server. This can be test without the opposite
haproxy reversal support though a combination of VTC clients used to
emit HTTP/2 responses after connection.
This test ensures that first we get a 503 when connecting on a reverse
server with no idle connection. Then a dummy VTC client is connected to
act as as server. It is then expected that the same request is achieved
with a 200 this time.
Introduced in:
424981cde REGTEST: add ifnone-forwardfor test
b015b3eb1 REGTEST: add RFC7239 forwarded header tests
see also:
fbbbc33df REGTESTS: Do not use REQUIRE_VERSION for HAProxy 2.5+
Ben Kallus also noticed that we preserve leading zeroes on content-length
values. While this is totally valid, it would be safer to at least trim
them before passing the value, because a bogus server written to parse
using "strtol(value, NULL, 0)" could inadvertently take a leading zero
as a prefix for an octal value. While there is not much that can be done
to protect such servers in general (e.g. lack of check for overflows etc),
at least it's quite cheap to make sure the transmitted value is normalized
and not taken for an octal one.
This is not really a bug, rather a missed opportunity to sanitize the
input, but is marked as a bug so that we don't forget to backport it to
stable branches.
A combined regtest was added to h1or2_to_h1c which already validates
end-to-end syntax consistency on aggregate headers.
The content-length header parser has its dedicated function, in order
to take extreme care about invalid, unparsable, or conflicting values.
But there's a corner case in it, by which it stops comparing values
when reaching the end of the header. This has for a side effect that
an empty value or a value that ends with a comma does not deserve
further analysis, and it acts as if the header was absent.
While this is not necessarily a problem for the value ending with a
comma as it will be cause a header folding and will disappear, it is a
problem for the first isolated empty header because this one will not
be recontructed when next ones are seen, and will be passed as-is to the
backend server. A vulnerable HTTP/1 server hosted behind haproxy that
would just use this first value as "0" and ignore the valid one would
then not be protected by haproxy and could be attacked this way, taking
the payload for an extra request.
In field the risk depends on the server. Most commonly used servers
already have safe content-length parsers, but users relying on haproxy
to protect a known-vulnerable server might be at risk (and the risk of
a bug even in a reputable server should never be dismissed).
A configuration-based work-around consists in adding the following rule
in the frontend, to explicitly reject requests featuring an empty
content-length header that would have not be folded into an existing
one:
http-request deny if { hdr_len(content-length) 0 }
The real fix consists in adjusting the parser so that it always expects a
value at the beginning of the header or after a comma. It will now reject
requests and responses having empty values anywhere in the C-L header.
This needs to be backported to all supported versions. Note that the
modification was made to functions h1_parse_cont_len_header() and
http_parse_cont_len_header(). Prior to 2.8 the latter was in
h2_parse_cont_len_header(). One day the two should be refused but the
former is also used by Lua.
The HTTP messaging reg-tests were completed to test these cases.
Thanks to Ben Kallus of Dartmouth College and Narf Industries for
reporting this! (this is in GH #2237).
Splicing is not available on all platform. Thus a dedicated script is used
to check we properly skip payload for bodyless response when splicing is
used. This way, we are still able to test the feature with the original
script on all platform.
This patch fixes an issue on the CI introduced by commit ef2b15998
("BUG/MINOR: htx/mux-h1: Properly handle bodyless responses when splicing is
used"). It must be backported with the above commit.
There is a mechanisme in the H1 and H2 multiplexer to skip the payload when
a response is returned to the client when it must not contain any payload
(response to a HEAD request or a 204/304 response). However, this does not
work when the splicing is used. The H2 multiplexer does not support the
splicing, so there is no issue. But with the mux-h1, when data are sent
using the kernel splicing, the mux on the server side is not aware the
client side should skip the payload. And once the data are put in a pipe,
there is no way to stop the sending.
It is a defect of the current design. This will be easier to deal with this
case when the mux-to-mux forwarding will be implemented. But for now, to fix
the issue, we should add an HTX flag on the start-line to pass the info from
the client side to the server side and be able to disable the splicing in
necessary.
The associated reg-test was improved to be sure it does not fail when the
splicing is configured.
This patch should be backported as far as 2.4..
Adds a new sample fetch method to get the curve name used in the
key agreement to enable better observability. In OpenSSLv3, the function
`SSL_get_negotiated_group` returns the NID of the curve and from the NID,
we get the curve name by passing the NID to OBJ_nid2sn. This was not
available in v1.1.1. SSL_get_curve_name(), which returns the curve name
directly was merged into OpenSSL master branch last week but will be available
only in its next release.
When a s-maxage cache-control directive is present, it overrides any
other max-age or expires value (see section 5.2.2.9 of RFC7234). So if
we have a max-age=0 alongside a strictly positive s-maxage, the response
should be cached.
This bug was raised in GitHub issue #2203.
The fix can be backported to all stable branches.
In GH #2187 it was mentioned that the ifnone-forwardfor regtest
did not cover the case where forwardfor ifnone is explicitly set in
the frontend but forwardfor option is not used in the backend.
Expected behavior in this case is that the frontend takes the precedence
because the backend did not specify the option.
Adding this missing case to prevent regressions in the future.
Depending on the timing, time to time, the log messages can be mixed. A
client can start and be fully handled by HAProxy (including its log message)
before the log message of the previous client was emitted or received. To
fix the issue, a barrier was added to be sure to eval the "expect" rule on
logs before starting the next client.
Because of the commit 5cb8d7b8f ("BUG/MINOR: peers: Improve detection of
config errors in peers sections"), 2 scripts now report errors during
startup because some variables are not set and the remote peer server is
thus malformed. To perform a peer synchro between 2 haproxys in these
scripts, the startup must be delayed to properly resolve addresses.
In addidiotn, we must wait (2s) to be sure the connection between peers is
properly established. These scripts are now flagged as slow.
As seen in commits 33a4461fa ("BUG/MINOR: stats: Fix Lua's `get_stats`
function") and a46b142e8 ("BUG/MINOR: Missing stat_field_names (since
f21d17bb)") it seems frequent to omit to update stats_fields[] when
adding a new ST_F_xxx entry. This breaks Lua's get_stats() and shows
a "(null)" in the header of "show stat", but that one is not detectable
to the naked eye anymore.
Let's add a reminder above the enum declaration about this, and a small
reg tests checking for the absence of "(null)". It was verified to fail
before the last patch above.
When a message is compressed, A "Vary" header is added with
"accept-encoding" value. However, a new header is always added, regardless
there is already a Vary header or not. In addition, if there is already a
Vary header, there is no check on values to be sure "accept-encoding" value
is not already there. So it is possible to have it twice.
To improve this part, we now test Vary header values and "accept-encoding"
is only added if it was not found. In addition, "accept-encoding" value is
appended to the last Vary header found, if any. Otherwise, a new header is
added.
It was previously reduced from 10s to 1s but it remains too high, espeically
for the CI. It may be drastically reduced to 100ms. Idea is to just be sure
we will wait for the response before evaluating the TCP rules.
Because of the previous fix, log/last_rule.vtc script is failing. The
inspect-delay is no longer shorten when the end of the message is
reached. Thus WAIT_END acl is trully respected. 10s is too high and hit the
Vtext timeout, making the script fails.
Fix the openssl build with older openssl version by disabling the new
ssl_c_r_dn fetch.
This also disable the ssl_client_samples.vtc file for OpenSSL version
older than 1.1.1
