The latter function is more suited to operations that don't require any
check because the check has already been performed. It will be used by
other b_* functions.
This function is used a lot in block copies and is needlessly
complicated since it still uses pointer arithmetic. Let's fall
back to regular offsets and simplify it. This removed around
23 bytes from b_putblk() and it removed any conditional jump.
In thread_sync_barrier, we exit when all threads have set their own bit in the
barrier mask. It is done by comparing it to all_threads_mask. But we must not
use a simple equality to do so, becaue all_threads_mask may change. Since commit
ba86c6c25 ("MINOR: threads: Be sure to remove threads from all_threads_mask on
exit"), when a thread exit, its bit is removed from all_threads_mask. Instead,
we must use a bitwise AND to test is all bits of all_threads_mask are set.
This also requires that all_threads_mask is set to volatile if we want to
catch changes.
This patch must be backported in 1.8.
This new function wl_set_waitcb() prepopulates a wait_list with a tasklet
and a context and returns it so that it can be passed to ->subscribe() to
be added to a connection or conn_stream's wait_list. The caller doesn't
need to know all the insiders details anymore this way.
Totally nuke the "send" method, instead, the upper layer decides when it's
time to send data, and if it's not possible, uses the new subscribe() method
to be called when it can send data again.
Add a new "subscribe" method for connection, conn_stream and mux, so that
upper layer can subscribe to them, to be called when the event happens.
Right now, the only event implemented is "SUB_CAN_SEND", where the upper
layer can register to be called back when it is possible to send data.
The connection and conn_stream got a new "send_wait_list" entry, which
required to move a few struct members around to maintain an efficient
cache alignment (and actually this slightly improved performance).
Now all the code used to manipulate chunks uses a struct buffer instead.
The functions are still called "chunk*", and some of them will progressively
move to the generic buffer handling code as they are cleaned up.
Chunks are only a subset of a buffer (a non-wrapping version with no head
offset). Despite this we still carry a lot of duplicated code between
buffers and chunks. Replacing chunks with buffers would significantly
reduce the maintenance efforts. This first patch renames the chunk's
fields to match the name and types used by struct buffers, with the goal
of isolating the code changes from the declaration changes.
Most of the changes were made with spatch using this coccinelle script :
@rule_d1@
typedef chunk;
struct chunk chunk;
@@
- chunk.str
+ chunk.area
@rule_d2@
typedef chunk;
struct chunk chunk;
@@
- chunk.len
+ chunk.data
@rule_i1@
typedef chunk;
struct chunk *chunk;
@@
- chunk->str
+ chunk->area
@rule_i2@
typedef chunk;
struct chunk *chunk;
@@
- chunk->len
+ chunk->data
Some minor updates to 3 http functions had to be performed to take size_t
ints instead of ints in order to match the unsigned length here.
Now the buffers only contain the header and a pointer to the storage
area which can be anywhere. This will significantly simplify buffer
swapping and will make it possible to map chunks on buffers as well.
The buf_empty variable was removed, as now it's enough to have size==0
and area==NULL to designate the empty buffer (thus a non-allocated head
is the empty buffer by default). buf_wanted for now is indicated by
size==0 and area==(void *)1.
The channels and the checks now embed the buffer's head, and the only
pointer is to the storage area. This slightly increases the unallocated
buffer size (3 extra ints for the empty buffer) but considerably
simplifies dynamic buffer management. It will also later permit to
detach unused checks.
The way the struct buffer is arranged has proven quite efficient on a
number of tests, which makes sense given that size is always accessed
and often first, followed by the othe ones.
It used to be called 'len' during the reorganisation but strictly speaking
it's not a length since it wraps. Also we already use '_data' as the suffix
to count available data, and data is also what we use to indicate the amount
of data in a pipe so let's improve consistency here. It was important to do
this in two operations because data used to be the name of the pointer to
the storage area.
This one is more generic and designed to work on a random block. It
may later get a b_rep_ist() variant since many strings are already
available as (ptr,len).
There was no point keeping that function in the buffer part since it's
exclusively used by HTTP at the channel level, since it also automatically
appends the CRLF. This further cleans up the buffer code.
The new file istbuf.h links the indirect strings (ist) with the buffers.
The purpose is to encourage addition of more standard buffer manipulation
functions that rely on this in order to improve the overall ease of use
along all the code. Just like ist.h and buf.h, this new file is not
expected to depend on anything beyond these two files.
A few functions were added and/or converted from buffer.h :
- b_isteq() : indicates if a buffer and a string match
- b_isteat() : consumes a string from the buffer if it matches
- b_istput() : appends a small string to a buffer (all or none)
- b_putist() : appends part of a large string to a buffer
The equivalent functions were removed from buffer.h and changed at the
various call places.
The two variants now do exactly the same (appending at the tail of the
buffer) so let's not keep the distinction between these classes of
functions and have generic ones for this. It's also worth noting that
b{i,o}_putchk() wasn't used at all and was removed.
There's no distinction between in and out data now. The latter covers
the needs of the former and supports wrapping. The extra cost is
negligible given the locations where it's used.
Since we never access this field directly anymore, but only through the
channel's wrappers, it can now move to the channel. The buffers are now
completely free from the distinction between input and output data.
Since we use "_data" for the amount of data at many places, as opposed to
"_space" for the amount of space, let's rename the "data" field to "area"
so that we can reuse "data" later for the amount of data in the buffer
(currently called "len" despite not being contigous).
b_set_data() is used :
- in proto_http and hlua to trim input data (b_set_data(co_data()))
- in SPOE to append data to a buffer while building a message
In no case will this truncate a buffer so we can safely remove the
test for len < b->output.
b_del() is used in :
- mux_h2 with the demux buffer : always processes input data
- checks with output data though output is not considered at all there
- b_eat() which is not used anywhere
- co_skip() where the len is always <= output
Thus the distinction for output data is not needed anymore and the
decrement can be made inconditionally in co_skip().
This is intentionally the minimal and safest set of changes, some cleanups
area still required. These changes are quite tricky and cannot be
independantly tested, so it's important to keep this patch as bisectable
as possible.
buf_empty and buf_wanted were changed and are now exactly similar since
there's no <p> member in the structure anymore. Given that no test is
ever made in the code to check that buf == &buf_wanted, it may be possible
that we don't need to have two anymore, unless some buf_empty tests have
precedence. This will have to be investigated.
A significant part of this commit affects the HTTP compression code,
which used to deeply manipulate the input and output buffers without
any reasonable solution for a better abstraction. For this reason, if
any regression is met and designates this patch as the culprit, it is
important to run tests which specifically involve compression or which
definitely don't use it in order to spot the issue.
Cc: Olivier Houchard <ohouchard@haproxy.com>
For the same consistency reasons, let's use b_empty() at the few places
where an empty buffer is expected, or c_empty() if it's done on a channel.
Some of these places were there to realign the buffer so
{b,c}_realign_if_empty() was used instead.
We used to have variations around buffer_total_space() and
size-buffer_len() or size-b_data(). Let's simplify all this. buffer_len()
was also removed as not used anymore.
Now the new API functions are being used everywhere, we can get rid
of b_ptr(). A few last users like bi_istput() and bo_istput() appear
to only differ by what part of the buffer they're increasing, but
that should quickly be merged.
With this flag we introduce the notion of "dry" vs "wet" buffers : some
demultiplexers like the H2 mux require as much room as possible for some
operations that are not retryable like decoding a headers frame. For this
they need to know if the buffer is congested with data scheduled for
leaving soon or not. Since the new API will not provide this information
in the buffer itself, the caller must indicate it. We never need to know
the amount of such data, just the fact that the buffer is not in its
optimal condition to be used for receipt. This "CO_RFL_BUF_WET" flag is
used to mention that such outgoing data are still pending in the buffer
and that a sensitive receiver should better let it "dry" before using it.
The mux and transport rcv_buf() now takes a "flags" argument, just like
the snd_buf() one or like the equivalent syscall lower part. The upper
layers will use this to pass some information such as indicating whether
the buffer is free from outgoing data or if the lower layer may allocate
the buffer itself.
It also returns a size_t. This is in order to clean the API. Note
that the H2 mux still uses some ints in the functions called from
h2_rcv_buf(), though it's not really a problem given that H2 frames
are smaller. It may deserve a general cleanup later though.
Just like we have a size_t for xprt->snd_buf(), we adjust to use size_t
for rcv_buf()'s count argument and return value. It also removes the
ambiguity related to the possibility to see a negative value there.
This way the mux doesn't need to modify the buffer's metadata anymore
nor to know the output's size. The mux->snd_buf() function now takes a
const buffer and it's up to the caller to update the buffer's state.
The return type was updated to return a size_t to comply with the count
argument.
This way the senders don't need to modify the buffer's metadata anymore
nor to know about the output's split point. This way the functions can
take a const buffer and it's clearer who's in charge of updating the
buffer after a send. That's why the buffer realignment is now performed
by the caller of the transport's snd_buf() functions.
The return type was updated to return a size_t to comply with the count
argument.
Now that there are no more users requiring to modify the buffer anymore,
switch these ones to const char and const buffer. This will make it more
obvious next time send functions are tempted to modify the buffer's output
count. Minor adaptations were necessary at a few call places which were
using char due to the function's previous prototype.
Till now the callers had to know which one to call for specific use cases.
Let's fuse them now since a single one will remain after the API migration.
Given that bi_del() may only be used where o==0, just combine the two tests
by first removing output data then only input.
This will be important so that we can parse a buffer without touching it.
Now we indicate where from the buffer's head we plan to start to copy, and
for how many bytes. This will be used by send functions to loop at the end
of the buffer without having to update the buffer's output byte count.
This new functoin limits itself to the amount of data available in the
buffer and doesn't care about the direction anymore. It's only called
from co_getblk() which already checks that no more than the available
output bytes is requested.
These ones were merged into a single b_contig_space() that covers both
(the bo_ case was a simplified version of the other one). The function
doesn't use ->i nor ->o anymore.
This function was sometimes used from a channel and sometimes from a buffer.
In both cases it requires knowledge of the size of the output data (to skip
them). Here the split ensures the channel can deal with this point, and that
other places not having output data can continue to work.
These ones manipulate the output data count which will be specific to
the channel soon, so prepare the call points to use the channel only.
The b_* functions are now unused and were removed.
The few call places where it's used can use the trash as a swap buffer,
which is made for this exact purpose. This way we can rely on the
generic b_slow_realign() call.
Where relevant, the channel version is used instead. The buffer version
was ported to be more generic and now takes a swap buffer and the output
byte count to know where to set the alignment point. The H2 mux still
uses buffer_slow_realign() with buf->o but it will change later.
This adds :
- c_orig() : channel buffer's origin
- c_size() : channel buffer's size
- c_wrap() : channel buffer's wrapping location
- c_data() : channel buffer's total data count
- c_room() : room left in channel buffer's
- c_empty() : true if channel buffer is empty
- c_full() : true if channel buffer is full
- c_ptr() : pointer to an offset relative to input data in the buffer
- c_adv() : advances the channel's buffer (bytes become part of output)
- c_rew() : rewinds the channel's buffer (output bytes not output anymore)
- c_realign_if_empty() : realigns the buffer if it's empty
- co_data() : # of output data
- co_head() : beginning of output data
- co_tail() : end of output data
- ci_data() : # of input data
- ci_head() : beginning of input data
- ci_tail() : end of input data
- ci_stop() : location after ci_tail()
- ci_next() : pointer to next input byte
And for the ci_* / co_* functions above, the "__*" variants which disable
wrapping checks, and the "_ofs" variants which return an offset relative to
the buffer's origin instead.
Many places deal with buffer realignment after data removal. The method
is always the same : if the buffer is empty, set its pointer to the origin.
Let's have a function for this so that we have less code to change with the
new API.
Add a new function that lets you set the amount of input in a buffer.
For now it extends/truncates b->i except if the total length is
below b->o in which case it clears i and adjusts o.
Instead of doing b->i -= directly, introduce b_sub(), that does the job, to
make it easier to switch to the future API.
Also add b_add(), that increases b->i, instead of using it directly, and
bo_add(), that does increase b->o.
Here's the list of newly introduced functions :
- b_data(), returning the total amount of data in the buffer (currently i+o)
- b_orig(), returning the origin of the storage area, that is, the place of
position 0.
- b_wrap(), pointer to wrapping point (currently data+size)
- b_size(), returning the size of the buffer
- b_room(), returning the amount of bytes left available
- b_full(), returning true if the buffer is full, otherwise false
- b_stop(), pointer to end of data mark (currently p+i), used to compute
distances or a stop pointer for a loop.
- b_peek(), this one will help make the transition to the new buffer model.
It returns a pointer to a position in the buffer known from an offest
relative to the beginning of the data in the buffer. Thus, we can replace
the following occurrences :
bo_ptr(b) => b_peek(b, 0);
bo_end(b) => b_peek(b, b->o);
bi_ptr(b) => b_peek(b, b->o);
bi_end(b) => b_peek(b, b->i + b->o);
b_ptr(b, ofs) => b_peek(b, b->o + ofs);
- b_head(), pointer to the beginning of data (currently bo_ptr())
- b_tail(), pointer to first free place (currently bi_ptr())
- b_next() / b_next_ofs(), pointer to the next byte, taking wrapping
into account.
- b_dist(), returning the distance between two pointers belonging to a buffer
- b_reset(), which resets the buffer
- b_space_wraps(), indicating if the free space wraps around the buffer
- b_almost_full(), indicating if 3/4 or more of the buffer are used
Some of these are provided with the unchecked variants using the "__"
prefix, or with the "_ofs" suffix indicating they return a relative
position to the buffer's origin instead of a pointer.
Cc: Olivier Houchard <ohouchard@haproxy.com>
Passing unsigned ints everywhere is painful, and will cause some headache
later when we'll want to integrate better with struct ist which already
uses size_t. Let's switch buffers to use size_t instead.
The buffer code currently depends on pools and other stuff and is not
really autonomous anymore. The rewrite of the new API is an opportunity
to clean this up. This patch creates a new file (buf.h) which does not
depend on other elements and which will only contain what is needed to
perform the most basic buffer operations. The new API will be introduced
in this file and the conversion will be finished once buffer.h is empty.
The definition of struct buffer was moved to this new file, using more
explicity stdint types for the sizes and offsets.
Most new functions will be implemented in two variants :
__b_something() : unchecked variant, no wrapping is expected
b_something() : wrapping-checked variant
This way callers will be able to select which one to use depending on
the use cases.
Commit 200b0fa ("MEDIUM: Add support for updating TLS ticket keys via
socket") introduced support for updating TLS ticket keys from the CLI,
but missed a small corner case : if multiple bind lines reference the
same tls_keys file, the same reference is used (as expected), but during
the clean shutdown, it will lead to a double free when destroying the
bind_conf contexts since none of the lines knows if others still use
it. The impact is very low however, mostly a core and/or a message in
the system's log upon old process termination.
Let's introduce some basic refcounting to prevent this from happening,
so that only the last bind_conf frees it.
Thanks to Janusz Dziemidowicz and Thierry Fournier for both reporting
the same issue with an easy reproducer.
This fix needs to be backported from 1.6 to 1.8.
By default, HAProxy's DNS resolution at runtime ensure that there is no
IP address duplication in a backend (for servers being resolved by the
same hostname).
There are a few cases where people want, on purpose, to disable this
feature.
This patch introduces a couple of new server side options for this purpose:
"resolve-opts allow-dup-ip" or "resolve-opts prevent-dup-ip".
Up until now, a tasklet couldn't be free'd while it was in the list, it is
no longer the case, so make sure we remove it from the list before freeing it.
To do so, we have to make sure we correctly initialize it, so use LIST_INIT,
instead of setting the pointers to NULL.
The behavior of sigprocmask in an multithreaded environment is
undefined.
The new macro ha_sigmask() calls either pthreads_sigmask() or
sigprocmask() if haproxy was built with thread support or not.
This should be backported to 1.8.
To make sure we don't inadvertently insert task in the global runqueue,
while only the local runqueue is used without threads, make its definition
and usage conditional on USE_THREAD.
When building without threads enabled, instead of just using the global
runqueue, just use the local runqueue associated with the only thread, as
that's what is now expected for a single thread in prcoess_runnable_tasks().
This should fix haproxy when built without threads.
When an applet is created, let's assign it the same nice value as the task
of the stream which owns it. It ensures that fairness is properly propagated
to applets, and that the CLI can regain a low latency behaviour again. Huge
differences have been seen under extreme loads, with the CLI being called
every 200 microseconds instead of 11 milliseconds.
This function returns true is some notifications are registered.
This function is usefull for the following patch
BUG/MEDIUM: lua/socket: Sheduling error on write: may dead-lock
It should be backported in 1.6, 1.7 and 1.8
Don't forget to increase tasks_run_queue when we're adding a task to the
tasklet list, and to decrease it when we remove a task from a runqueue,
or its value won't be accurate, and could lead to tasks not being executed
when put in the global run queue.
1.9-dev only, no backport is needed.
This patch adds a warning if an http-(request|reponse) (add|set)-header
rewrite fails to change the respective header in a request or response.
This usually happens when tune.maxrewrite is not sufficient to hold all
the headers that should be added.
There's no real reason to have a specific scheduler for applets anymore, so
nuke it and just use tasks. This comes with some benefits, the first one
being that applets cannot induce high latencies anymore since they share
nice values with other tasks. Later it will be possible to configure the
applets' nice value. The second benefit is that the applet scheduler was
not very thread-friendly, having a big lock around it in prevision of this
change. Thus applet-intensive workloads should now scale much better with
threads.
Some more improvement is possible now : some applets also use a task to
handle timers and timeouts. These ones could now be simplified to use only
one task.
Introduce tasklets, lightweight tasks. They have no notion of priority,
they are just run as soon as possible, and will probably be used for I/O
later.
For the moment they're used to replace the temporary thread-local list
that was used in the scheduler. The first part of the struct is common
with tasks so that tasks can be cast to tasklets and queued in this list.
Once a task is in the tasklet list, it has its leaf_p set to 0x1 so that
it cannot accidently be confused as not in the queue.
Pure tasklets are identifiable by their nice value of -32768 (which is
normally not possible).
A lot of tasks are run on one thread only, so instead of having them all
in the global runqueue, create a per-thread runqueue which doesn't require
any locking, and add all tasks belonging to only one thread to the
corresponding runqueue.
The global runqueue is still used for non-local tasks, and is visited
by each thread when checking its own runqueue. The nice parameter is
thus used both in the global runqueue and in the local ones. The rare
tasks that are bound to multiple threads will have their nice value
used twice (once for the global queue, once for the thread-local one).
In preparation for thread-specific runqueues, change the task API so that
the callback takes 3 arguments, the task itself, the context, and the state,
those were retrieved from the task before. This will allow these elements to
change atomically in the scheduler while the application uses the copied
value, and even to have NULL tasks later.
A few users reported that building without threads was accidently broken
after commit 6b96f72 ("BUG/MEDIUM: pollers: Use a global list for fd
shared between threads.") due to all_threads_mask not being defined.
It's OK to set it to zero as other code parts do when threads are
enabled but only one thread is used.
This needs to be backported to 1.8.
The function hlua_ctx_resume return less text message and more error
code. These error code allow the caller to return appropriate
message to the user.
The polled_mask is only used in the pollers, and removing it from the
struct fdtab makes it fit in one 64B cacheline again, on a 64bits machine,
so make it a separate array.
With the old model, any fd shared by multiple threads, such as listeners
or dns sockets, would only be updated on one threads, so that could lead
to missed event, or spurious wakeups.
To avoid this, add a global list for fd that are shared, using the same
implementation as the fd cache, and only remove entries from this list
when every thread as updated its poller.
[wt: this will need to be backported to 1.8 but differently so this patch
must not be backported as-is]
