An extra parameter for tcp-check send rules can be specified to handle the
string or the hexa string as a log-format one. Using "log-format" option,
instead of considering the data to send as raw data, it is parsed as a
log-format string. Thus it is possible to call sample fetches to customize data
sent to a server. Of course, because we have no stream attached to healthchecks,
not all sample fetches are available. So be careful.
tcp-check set-var(check.port) int(8000)
tcp-check set-var(check.uri) str(/status)
tcp-check connect port var(check.port)
tcp-check send "GET %[check.uri] HTTP/1.0\r\n" log-format
tcp-check send "Host: %[srv_name]\r\n" log-format
tcp-check send "\r\n"
Since we have a session attached to tcp-check healthchecks, It is possible use
sample expression and variables. In addition, it is possible to add tcp-check
set-var rules to define custom variables. So, now, a sample expression can be
used to define the port to use to establish a connection for a tcp-check connect
rule. For instance:
tcp-check set-var(check.port) int(8888)
tcp-check connect port var(check.port)
With this option, it is now possible to use a specific address to open the
connection for a tcp-check connect rule. If the port option is also specified,
it is used in priority.
With this option, it is possible to establish the connection opened by a
tcp-check connect rule using upstream socks4 proxy. Info from the socks4
parameter on the server are used.
Register the custom action rules "set-var" and "unset-var", that will
call the parse_store() command upon parsing.
These rules are thus built and integrated to the tcp-check ruleset, but
have no further effect for the moment.
Add a dedicated vars scope for checks. This scope is considered as part of the
session scope for accounting purposes.
The scope can be addressed by a valid session, even embryonic. The stream is not
necessary.
The scope is initialized after the check session is created. All variables are
then pruned before the session is destroyed.
Create a session for each healthcheck relying on a tcp-check ruleset. When such
check is started, a session is allocated, which will be freed when the check
finishes. A dummy static frontend is used to create these sessions. This will be
useful to support variables and sample expression. This will also be used,
later, by HTTP healthchecks to rely on HTTP muxes.
The loop in tcpcheck_main() function is quite hard to understand. Depending
where we are in the loop, The current_step is the currentely executed rule or
the one to execute on the next call to tcpcheck_main(). When the check result is
reported, we rely on the rule pointed by last_started_step or the one pointed by
current_step. In addition, the loop does not use the common list_for_each_entry
macro and it is thus quite confusing.
So the loop has been totally rewritten and splitted to several functions to
simplify its reading and its understanding. Tcp-check rules are evaluated in
dedicated functions. And a common for_each loop is used and only one rule is
referenced, the current one.
After the configuration parsing, when its validity check, an implicit tcp-check
connect rule is added in front of the tcp-check ruleset if the first non-comment
rule is not a connect one. This implicit rule is flagged to use the default
check parameter.
This means now, all tcp-check rulesets begin with a connect and are never
empty. When tcp-check healthchecks are used, all connections are thus handled by
tcpcheck_main() function.
Parse back-references in comments of tcp-check expect rules. If references are
made, capture groups in the match and replace references to it within the
comment when logging the error. Both text and binary regex can caputre groups
and reference them in the expect rule comment.
[Cf: I slightly updated the patch. exp_replace() function is used instead of a
custom one. And if the trash buffer is too small to contain the comment during
the substitution, the comment is ignored.]
The rbinary match works similarly to the rstring match type, however the
received data is rewritten as hex-string before the match operation is
done.
This allows using regexes on binary content even with the POSIX regex
engine.
[Cf: I slightly updated the patch. mem2hex function was removed and dump_binary
is used instead.]
Allow declaring tcpcheck connect commands with a new parameter,
"linger". This option will configure the connection to avoid using an
RST segment to close, instead following the four-way termination
handshake. Some servers would otherwise log each healthcheck as
an error.
Some expect rules cannot be satisfied due to inherent ambiguity towards
the received data: in the absence of match, the current behavior is to
be forced to wait either the end of the connection or a buffer full,
whichever comes first. Only then does the matching diagnostic is
considered conclusive. For instance :
tcp-check connect
tcp-check expect !rstring "^error"
tcp-check expect string "valid"
This check will only succeed if the connection is closed by the server before
the check timeout. Otherwise the first expect rule will wait for more data until
"^error" regex matches or the check expires.
Allow the user to explicitly define an amount of data that will be
considered enough to determine the value of the check.
This allows succeeding on negative rstring rules, as previously
in valid condition no match happened, and the matching was repeated
until the end of the connection. This could timeout the check
while no error was happening.
[Cf: I slighly updated the patch. The parameter was renamed and the value is a
signed integer to support -1 as default value to ignore the parameter.]
When receiving additional data while chaining multiple tcp-check expects,
previous inverse expects might have a different result with the new data. They
need to be evaluated again against the new data.
Add a pointer to the first inverse expect rule of the current expect chain
(possibly of length one) to each expect rule. When receiving new data, the
currently evaluated tcp-check rule is set back to this pointed rule.
Fonctionnaly speaking, it is a bug and it exists since the introduction of the
feature. But there is no way for now to hit it because when an expect rule does
not match, we wait for more data, independently on the inverse flag. The only
way to move to the following rule is to be sure no more data will be received.
This patch depends on the commit "MINOR: mini-clist: Add functions to iterate
backward on a list".
[Cf: I slightly updated the patch. First, it only concerns inverse expect
rule. Normal expect rules are not concerned. Then, I removed the BUG tag
because, for now, it is not possible to move to the following rule when the
current one does not match while more data can be received.]
Replace the generic integer with an enumerated list. This allows light
type check and helps debugging (seeing action = 2 in the struct is not
helpful).
This options is used to force a non-SSL connection to check a SSL server or to
invert a check-ssl option inherited from the default section. The use_ssl field
in the check structure is used to know if a SSL connection must be used
(use_ssl=1) or not (use_ssl=0). The server configuration is used by default.
The problem is that we cannot distinguish the default case (no specific SSL
check option) and the case of an explicit non-SSL check. In both, use_ssl is set
to 0. So the server configuration is always used. For a SSL server, when
no-check-ssl option is set, the check is still performed using a SSL
configuration.
To fix the bug, instead of a boolean value (0=TCP, 1=SSL), we use a ternary value :
* 0 = use server config
* 1 = force SSL
* -1 = force non-SSL
The same is done for the server parameter. It is not really necessary for
now. But it is a good way to know is the server no-ssl option is set.
In addition, the PR_O_TCPCHK_SSL proxy option is no longer used to set use_ssl
to 1 for a check. Instead the flag is directly tested to prepare or destroy the
server SSL context.
This patch should be backported as far as 1.8.
Server address and port may change at runtime. So the address and port passed as
arguments and as environment variables when an external check is executed must
be updated. The current number of connections on the server was already updated
before executing the command. So the same mechanism is used for the server
address and port. But in addition, command arguments are also updated.
This patch must be backported to all stable versions. It should fix the
issue #577.
buffer.h relies on proto/activity because it contains some code and not
just type definitions. It must not be included from types files. It
should probably also be split in two if it starts to include a proto.
This causes some circular dependencies at other places.
Have "socks4" and "check-via-socks4" server keyword added.
Implement handshake with SOCKS4 proxy server for tcp stream connection.
See issue #82.
I have the "SOCKS: A protocol for TCP proxy across firewalls" doc found
at "https://www.openssh.com/txt/socks4.protocol". Please reference to it.
[wt: for now connecting to the SOCKS4 proxy over unix sockets is not
supported, and mixing IPv4/IPv6 is discouraged; indeed, the control
layer is unique for a connection and will be used both for connecting
and for target address manipulation. As such it may for example report
incorrect destination addresses in logs if the proxy is reached over
IPv6]
Instead of assuming we have a server, store the proxy directly in struct
check, and use it instead of s->server.
This should be a no-op for now, but will be useful later when we change
mail checks to avoid having a server.
This should be backported to 1.9.
Add a way to configure the ALPN used by check, with a new "check-alpn"
keyword. By default, the checks will use the server ALPN, but it may not
be convenient, for instance because the server may use HTTP/2, while checks
are unable to do HTTP/2 yet.
When subscribing, we don't need to provide a list element, only the h2 mux
needs it. So instead, Add a list element to struct h2s, and use it when a
list is needed.
This forces us to use the unsubscribe method, since we can't just unsubscribe
by using LIST_DEL anymore.
This patch is larger than it should be because it includes some renaming.
Now the buffers only contain the header and a pointer to the storage
area which can be anywhere. This will significantly simplify buffer
swapping and will make it possible to map chunks on buffers as well.
The buf_empty variable was removed, as now it's enough to have size==0
and area==NULL to designate the empty buffer (thus a non-allocated head
is the empty buffer by default). buf_wanted for now is indicated by
size==0 and area==(void *)1.
The channels and the checks now embed the buffer's head, and the only
pointer is to the storage area. This slightly increases the unallocated
buffer size (3 extra ints for the empty buffer) but considerably
simplifies dynamic buffer management. It will also later permit to
detach unused checks.
The way the struct buffer is arranged has proven quite efficient on a
number of tests, which makes sense given that size is always accessed
and often first, followed by the othe ones.
server.h needs checks.h since it references the struct check, but depending
on the include order it will fail if check.h is included first due to this
one including server.h in turn while it doesn't need it.
All the references to connections in the data path from streams and
stream_interfaces were changed to use conn_streams. Most functions named
"something_conn" were renamed to "something_cs" for this. Sometimes the
connection still is what matters (eg during a connection establishment)
and were not always renamed. The change is significant and minimal at the
same time, and was quite thoroughly tested now. As of this patch, all
accesses to the connection from upper layers go through the pass-through
mux.
HAProxy used to deduce port used for health checks when parsing configuration
at startup time.
Because of this way of working, it makes it complicated to change the port at
run time.
The current patch changes this behavior and makes HAProxy to choose the
port used for health checking when preparing the check task itself.
A new type of error is introduced and reported when no port can be found.
There won't be any impact on performance, since the process to find out the
port value is made of a few 'if' statements.
This patch also introduces a new check state CHK_ST_PORT_MISS: this flag is
used to report an error in the case when HAProxy needs to establish a TCP
connection to a server, to perform a health check but no TCP ports can be
found for it.
And last, it also introduces a new stream termination condition:
SF_ERR_CHK_PORT. Purpose of this flag is to report an error in the event when
HAProxy has to run a health check but no port can be found to perform it.
Causes HAProxy to emit a static string to the agent on every check,
so that you can independently control multiple services running
behind a single agent port.
tcpcheck error messages include the step id where the error occurs.
In some cases, this is not enough. Now, HAProxy also use the comment
field of the latest tcpcheck rule which has been run.
This commit allows HAProxy to parse a new directive in the tcpcheck
ruleset: 'comment'.
It is used to setup comments on the current tcpcheck rules.
A new field is added into the tcpcheck_rule structure.
This field will host a string used as a comment to describe the rule.
Then this comment can be used in logs to report a more user friendly
message on the step which failed during the tcpcheck ruleset.
When the destination IP is dynamically set, we can't use the "target"
to define the proto. This patch ensures that we always use the protocol
associated with the address family. The proto field was removed from
the server and check structs.
The motivation for this is to make checks more independent of each
other to allow further reuse of their infrastructure.
For nowserver->check and server->agent still always use the same values
for the addr and proto fields so this patch should not introduce any
behavioural changes.
Signed-off-by: Simon Horman <horms@verge.net.au>
commit 9ede66b0 introduced an environment variable (HAPROXY_SERVER_CURCONN) that
was supposed to be dynamically updated, but it was set only once, during its
initialization.
Most of the code provided in this previous patch has been rewritten in order to
easily update the environment variables without reallocating memory during each
check.
Now, HAPROXY_SERVER_CURCONN will contain the current number of connections on
the server at the time of the check.
Lasse Birnbaum Jensen reported an issue when agent checks are used at the same
time as standard healthchecks when SSL is enabled on the server side.
The symptom is that agent checks try to communicate in SSL while it should
manage raw data. This happens because the transport layer is shared between all
kind of checks.
To fix the issue, the transport layer is now stored in each check type,
allowing to use SSL healthchecks when required, while an agent check should
always use the raw_sock implementation.
The fix must be backported to 1.5.
This patch remove all references of standard regex in haproxy. The last
remaining references are only in the regex.[ch] files.
In the file src/checks.c, the original function uses a "pmatch" array.
In fact this array is unused. This patch remove it.
Agent will have the ability to return a weight without indicating an
up/down status. Currently this is not possible, so let's add a 5th
result CHK_RES_NEUTRAL for this purpose. It has been mapped to the
unused HCHK_STATUS_CHECKED which already serves as a neutral delimitor
between initiated checks and those returning a result.
A new tcp-check rule type: connect.
It allows HAProxy to test applications which stand on multiple ports or
multiple applications load-balanced through the same backend.
Health checks can now be paused. This is the status they get when the
server is put into maintenance mode, which is more logical than relying
on the server's state at some places. It will be needed to allow agent
checks to run when health checks are disabled (currently not possible).
