The purpose is to build a descendent parser that will split conditions
into expressions made of terms. There are two phases, a parsing phase
and an evaluation phase. Strictly speaking it's not required to cut
that in two right now, but it's likely that in the future we won't want
certain predicates to be evaluated during the parsing (e.g. file system
checks or execution of some external commands).
The cfg_eval_condition() function is now much simpler, it just tries to
parse a single term, and if OK evaluates it, then returns the result.
Errors are unchanged and may still be reported during parsing or
evaluation.
It's worth noting that some invalid expressions such as streq(a,b)zzz
continue to parse correctly for now (what remains after the parenthesis
is simply ignored as not necessary).
The .if/.else/.endif and condition evaluation code is quite dirty and
was dumped into cfgparse.c because it was easy. But it should be tidied
quite a bit as it will need to evolve.
Let's move all that to cfgcond.{c,h}.
make_arg_list() can create an array of arguments, some of which remain
to be resolved, but all users had to deal with their own roll back on
error. Let's add a free_args() function to release all the array's
elements and let the caller deal with the array itself (sometimes it's
allocated in the stack).
Since 1.9 with commit 673867c35 ("MAJOR: applets: Use tasks, instead
of rolling our own scheduler.") the thread_mask field of the appctx
became unused, but the code hadn't been cleaned for this. The appctx
has its own task and the task's thread_mask is the one to be displayed.
It's worth noting that all calls to appctx_new() pass tid_bit as the
thread_mask. This makes sense, and it could be convenient to decide
that this becomes the norm and to simplify the API.
Define a new global config statement named
"h2-workaround-bogus-websocket-clients".
This statement will disable the automatic announce of h2 websocket
support as specified in the RFC8441. This can be use to overcome clients
which fail to implement the relatively fresh RFC8441. Clients will in
his case automatically downgrade to http/1.1 for the websocket tunnel
if the haproxy configuration allows it.
This feature is relatively simple and can be backported up to 2.4, which
saw the introduction of h2 websocket support.
Replace http_get_path by the http_uri_parser API. The new functions is
renamed http_parse_path. Replace duplicated code for scheme and
authority parsing by invocations to http_parse_scheme/authority.
If no scheme is found for an URI detected as an absolute-uri/authority,
consider it to be an authority format : no path will be found. For an
absolute-uri or absolute-path, use the remaining of the string as the
path. A new http_uri_parser state is declared to mark the path parsing
as done.
Replace http_get_authority by the http_uri_parser API.
The new function is renamed http_parse_authority. Replace duplicated
scheme parsing code by http_parse_scheme invocation. A new
http_uri_parser state is declared to mark the authority parsing as done.
Replace http_get_scheme by the http_uri_parser API. The new function is
renamed http_parse_scheme. A new http_uri_parser state is declared to
mark the scheme parsing as completed.
Implement a http uri parser type. This type will be used as a context to
parse the various elements of an uri.
The goal of this serie of patches is to factorize duplicated code
between the http_get_scheme/authority/path functions. A simple parsing
API is designed to be able to extract once each element of an HTTP URI
in order. The functions will be renamed in the following patches to
reflect the API change with the prefix http_parse_*.
For the parser API, the http_uri_parser type must first be
initialized before usage. It will register the URI to parse and detect
its format according to the rfc 7230.
Implement the scheme-based uri normalization as described in rfc3986
6.3.2. Its purpose is to remove the port of an uri if the default one is
used according to the uri scheme : 80/http and 443/https. All other
ports are not touched.
This method uses an htx message as an input. It requires that the target
URI is in absolute-form with a http/https scheme. This represents most
of h2 requests except CONNECT. On the contrary, most of h1 requests
won't be elligible as origin-form is the standard case.
The normalization is first applied on the target URL of the start line.
Then, it is conducted on every Host headers present, assuming that they
are equivalent to the target URL.
This change will be notably useful to not confuse users who are
accustomed to use the host for routing without specifying default ports.
This problem was recently encountered with Firefox which specify the 443
default port for http2 websocket Extended CONNECT.
This patch adds the definition of two new array data_types:
'gpc': This is an array of 32bits General Purpose Counters.
'gpc_rate': This is an array on increment rates of General Purpose Counters.
Like for all arrays, they are limited to 100 elements.
This patch also adds actions and fetches to handle
elements of those arrays.
Note: As documented, those new actions and fetches won't
apply to the legacy 'gpc0', 'gpc1', 'gpc0_rate' nor 'gpc1_rate'.
This patch adds the definition of a new array data_type
'gpt'. This is an array of 32bits General Purpose Tags.
Like for all arrays, it is limited to 100 elements.
This patch also adds actions and fetches to handle
elements of this array.
Note: As documented, those new actions and fetches won't
apply to the legacy 'gpt0' data type.
This patch adds support of array data_types on the peer protocol.
The table definition message will provide an additionnal parameter
for array data-types: the number of elements of the array.
In case of array of frqp it also provides a second parameter:
the period used to compute freq counter.
The array elements are std_type values linearly encoded in
the update message.
Note: if a remote peer announces an array data_type without
parameters into the table definition message, all updates
on this table will be ignored because we can not
parse update messages consistently.
This patch provides the code to handle arrays of some
standard types (SINT, UINT, ULL and FRQP) in stick table.
This way we could define new "array" data types.
Note: the number of elements of an array was limited
to 100 to put a limit and to ensure that an encoded
update message will continue to fit into a buffer
when the peer protocol will handle such data types.
This patch replaces all advanced data type aliases on
stktable_data_cast calls by standard types.
This way we could call the same stktable_data_cast
regardless of the used advanced data type as long they
are using the same std type.
It also removes all the advanced data type aliases.
It is now possible to set the Netfilter MARK and the TOS field value in all
packets sent to the client from any tcp-request rulesets or the "tcp-response
content" one. To do so, the parsing of "set-mark" and "set-tos" actions are
moved in tcp_act.c and the actions evaluation is handled in dedicated functions.
This patch may be backported as far as 2.2 if necessary.
It is now possible to set the "nice" factor of the current stream from a
"tcp-request content" or "tcp-response content" ruleset. To do so, the
action parsing is moved in stream.c and the action evaluation is handled in
a dedicated function.
This patch may be backported as far as 2.2 if necessary.
It is now possible to set the stream log level from a "tcp-request content"
or "tcp-response content" ruleset. To do so, the action parsing is moved in
stream.c and the action evaluation is handled in a dedicated function.
This patch should fix issue #1306. It may be backported as far as 2.2 if
necessary.
Now we directly use p->queue to get to the queue, which is much more
straightforward. The performance on 100 servers and 16 threads
increased from 560k to 574k RPS, or 2.5%.
A lot more simplifications are possible, but the minimum was done at
this point.
A queue is specific to a server or a proxy, so we don't need to place
this distinction inside all pendconns, it can be in the queue itself.
This commit adds the relevant fields "px" and "sv" into the struct
queue, and initializes them accordingly.
This basically undoes the API changes that were performed by commit
0274286dd ("BUG/MAJOR: server: fix deadlock when changing maxconn via
agent-check") to address the deadlock issue: since process_srv_queue()
doesn't use the server lock anymore, it doesn't need the "server_locked"
argument, so let's get rid of it before it gets used again.
Till now whenever a server or proxy's queue was touched, this server
or proxy's lock was taken. Not only this requires distinct code paths,
but it also causes unnecessary contention with other uses of these locks.
This patch adds a lock inside the "queue" structure that will be used
the same way by the server and the proxy queuing code. The server used
to use a spinlock and the proxy an rwlock, though the queue only used
it for locked writes. This new version uses a spinlock since we don't
need the read lock part here. Tests have not shown any benefit nor cost
in using this one versus the rwlock so we could change later if needed.
The lower contention on the locks increases the performance from 362k
to 374k req/s on 16 threads with 20 servers and leastconn. The gain
with roundrobin even increases by 9%.
This is tagged medium because the lock is changed, but no other part of
the code touches the queues, with nor without locking, so this should
remain invisible.
This reverts commit fcb8bf8650.
The recent changes since 5304669e1 MEDIUM: queue: make
pendconn_process_next_strm() only return the pendconn opened a tiny race
condition between stream_free() and process_srv_queue(), as the pendconn
is accessed outside of the lock, possibly while it's being freed. A
different approach is required.
This reverts commit c83e45e9b0.
The recent changes since 5304669e1 MEDIUM: queue: make
pendconn_process_next_strm() only return the pendconn opened a tiny race
condition between stream_free() and process_srv_queue(), as the pendconn
is accessed outside of the lock, possibly while it's being freed. A
different approach is required.
This basically undoes the API changes that were performed by commit
0274286dd ("BUG/MAJOR: server: fix deadlock when changing maxconn via
agent-check") to address the deadlock issue: since process_srv_queue()
doesn't use the server lock anymore, it doesn't need the "server_locked"
argument, so let's get rid of it before it gets used again.
Till now whenever a server or proxy's queue was touched, this server
or proxy's lock was taken. Not only this requires distinct code paths,
but it also causes unnecessary contention with other uses of these locks.
This patch adds a lock inside the "queue" structure that will be used
the same way by the server and the proxy queuing code. The server used
to use a spinlock and the proxy an rwlock, though the queue only used
it for locked writes. This new version uses a spinlock since we don't
need the read lock part here. Tests have not shown any benefit nor cost
in using this one versus the rwlock so we could change later if needed.
The lower contention on the locks increases the performance from 491k
to 507k req/s on 16 threads with 20 servers and leastconn. The gain
with roundrobin even increases by 6%.
The performance profile changes from this:
13.03% haproxy [.] fwlc_srv_reposition
8.08% haproxy [.] fwlc_get_next_server
3.62% haproxy [.] process_srv_queue
1.78% haproxy [.] pendconn_dequeue
1.74% haproxy [.] pendconn_add
to this:
11.95% haproxy [.] fwlc_srv_reposition
7.57% haproxy [.] fwlc_get_next_server
3.51% haproxy [.] process_srv_queue
1.74% haproxy [.] pendconn_dequeue
1.70% haproxy [.] pendconn_add
At this point the differences are mostly measurement noise.
This is tagged medium because the lock is changed, but no other part of
the code touches the queues, with nor without locking, so this should
remain invisible.
This structure will be common to proxies and servers and will contain
everything needed to handle their respective queues. For now it's only
a tree head, a length and an index.
This essentially reverts commit 2b4370078 ("MINOR: lb/api: let callers
of take_conn/drop_conn tell if they have the lock") that was merged
during 2.4 before the various locks could be eliminated at the lower
layers. Passing that information complicates the cleanup of the queuing
code and it's become useless.
The server_parse_maxconn_change_request locks the server lock. However,
this function can be called via agent-checks or lua code which already
lock it. This bug has been introduced by the following commit :
commit 79a88ba3d0
BUG/MAJOR: server: prevent deadlock when using 'set maxconn server'
This commit tried to fix another deadlock with can occur because
previoulsy server_parse_maxconn_change_request requires the server lock
to be held. However, it may call internally process_srv_queue which also
locks the server lock. The locking policy has thus been updated. The fix
is functional for the CLI 'set maxconn' but fails to address the
agent-check / lua counterparts.
This new issue is fixed in two steps :
- changes from the above commit have been reverted. This means that
server_parse_maxconn_change_request must again be called with the
server lock.
- to counter the deadlock fixed by the above commit, process_srv_queue
now takes an argument to render the server locking optional if the
caller already held it. This is only used by
server_parse_maxconn_change_request.
The above commit was subject to backport up to 1.8. Thus this commit
must be backported in every release where it is already present.
GitHub uses github/linguist to determine the programming language used for each
source file to show statistics and to power the search. In cases of unique file
extensions this is easy, but for `.h` files the situation is less clear as they
are used for C, C++, Objective C and more. In these cases linguist makes use of
heuristics to determine the language.
One of these heuristics for C++ is that the file contains a line beginning with
`try`, only preceded by whitespace indentation. This heuristic matches the long
comment at the bottom of `channel-t.h`, as one sentence includes the word `try`
after a linebreak.
Fix this misdetection by changing the comment to follow the convention that all
lines start with an asterisk.
The function ssl_sock_load_srv_cert will be used at runtime for dynamic
servers. If the cert is not loaded on ckch tree, we try to access it
from the file-system.
Now this access operation is rendered optional by a new function
argument. It is only allowed at parsing time, but will be disabled for
dynamic servers at runtime.
Explicitly call ssl_initialize_random to initialize the random generator
in init() global function. If the initialization fails, the startup is
interrupted.
This commit is in preparation for support of ssl on dynamic servers. To
be able to activate ssl on dynamic servers, it is necessary to ensure
that the random generator is initialized on startup regardless of the
config. It cannot be called at runtime as access to /dev/urandom is
required.
This also has the effect to fix the previous non-consistent behavior.
Indeed, if bind or server in the config are using ssl, the
initialization function was called, and if it failed, the startup was
interrupted. Otherwise, the ssl initialization code could have been
called through the ssl server for lua, but this times without blocking
the startup on error. Or not called at all if lua was deactivated.
The SF_SRV_REUSED flag was set if a stream reused a backend connection.
One of its purpose is to count the total reuse on the backend in
opposition to newly instantiated connection.
However, the flag was diverted from its original purpose since the
following commit :
e8f5f5d8b2
BUG/MEDIUM: servers: Only set SF_SRV_REUSED if the connection if fully ready.
With this change, the flag is not set anymore if the mux is not ready
when a connection is picked for reuse. This can happen for multiplexed
connections which are inserted in the available list as soon as created
in http-reuse always mode. The goal of this change is to not retry
immediately this request in case on an error on the same server if the
reused connection is not fully ready.
This change is justified for the retry timeout handling but it breaks
other places which still uses the flag for its original purpose. Mainly,
in this case the wrong 'connect' backend counter is incremented instead
of the 'reuse' one. The flag is also used in http_return_srv_error and
may have an impact if a http server error is replied for this stream.
To fix this problem, the original purpose of the flag is restored by
setting it unconditionaly when a connection is reused. Additionally, a
new flag SF_SRV_REUSED_ANTICIPATED is created. This flag is set when the
connection is reused but the mux is not ready yet. For the timeout
handling on error, the request is retried immediately only if the stream
reused a connection without this newly anticipated flag.
This must be backported up to 2.1.
When a server relies on a SRV resolution, a task is created to clean it up
(fqdn/port and address) when the SRV resolution is considered as outdated
(based on the resolvers 'timeout' value). It is only possible if the server
inherits outdated info from a state file and is no longer selected to be
attached to a SRV item. Note that most of time, a server is attached to a
SRV item. Thus when the item becomes obsolete, the server is cleaned
up.
It is important to have such task to be sure the server will be free again
to have a chance to be resolved again with fresh information. Of course,
this patch is a workaround to solve a design issue. But there is no other
obvious way to fix it without rewritting all the resolvers part. And it must
be backportable.
This patch relies on following commits:
* MINOR: resolvers: Clean server in a dedicated function when removing a SRV item
* MINOR: resolvers: Remove server from named_servers tree when removing a SRV item
All the series must be backported as far as 2.2 after some observation
period. Backports to 2.0 and 1.8 must be evaluated.
To avoid repeating the same source code, allocating memory and initializing
the per_thr field from the server structure is transferred to a separate
function.
This function appends to a buffer some information from a connection.
This will be used by traces and possibly some debugging as well. A
frontend/backend/server, transport/control layers, source/destination
ip:port, connection pointer and direction are reported depending on
the available information.
With a single process, we don't need to USE_PRIVATE_CACHE, USE_FUTEX
nor USE_PTHREAD_PSHARED anymore. Let's only keep the basic spinlock
to lock between threads.
The relative_pid is always 1. In mworker mode we also have a
child->relative_pid which is always equalt relative_pid, except for a
master (0) or external process (-1), but these types are usually tested
for, except for one place that was amended to carefully check for the
PROC_O_TYPE_WORKER option.
Changes were pretty limited as most usages of relative_pid were for
designating a process in stats output and peers protocol.
Lots of places iterating over nbproc or comparing with nbproc could be
simplified. Further, "bind-process" and "process" parsing that was
already limited to process 1 or "all" or "odd" resulted in a bind_proc
field that was either 0 or 1 during the init phase and later always 1.
All the checks for compatibilities were removed since it's not possible
anymore to run a frontend and a backend on different processes or to
have peers and stick-tables bound on different ones. This is the largest
part of this patch.
The bind_proc field was removed from both the proxy and the receiver
structs.
Since the "process" and "bind-process" directives are still parsed,
configs making use of correct values allowing process 1 will continue
to work.
This is a leftover of a previous attempt that was introduced in 2.4 by
commit d3a88c1c3 ("MEDIUM: connection: close front idling connection on
soft-stop"). It can be backported, as the variable doesn't exist.
Since threads were introduced in 1.8, the USE_PRIVATE_CACHE mode of the
shctx was not updated to use locks. Originally it was meant to disable
sharing between processes, so it removes the lock/unlock instructions.
But with threads enabled, it's not possible to work like this anymore.
It's easy to see that once built with private cache and threads enabled,
sending violent SSL traffic to the the process instantly makes it die.
The HTTP cache is very likely affected as well.
This patch addresses this by falling back to our native spinlocks when
USE_PRIVATE_CACHE is used. In practice we could use them also for other
modes and remove all older implementations, but this patch aims at keeping
the changes very low and easy to backport. A new SHCTX_LOCK label was
added to help with debugging, but OTHER_LOCK might be usable as well
for backports.
An even lighter approach for backports may consist in always declaring
the lock (or reusing "waiters"), and calling pl_take_s() for the lock()
and pl_drop_s() for the unlock() operation. This could even be used in
all modes (process and threads), even when thread support is disabled.
Subsequent patches will further clean up this area.
This patch must be backported to all supported versions since 1.8.
This one was deprecated in 2.3 and marked for removal in 2.5. It suffers
too many limitations compared to threads, and prevents some improvements
from being engaged. Instead of a bypassable startup error, there is now
a hard error.
The parsing code was removed, and very few obvious cases were as well.
The code is deeply rooted at certain places (e.g. "for" loops iterating
from 0 to nbproc) so it will not be that trivial to remove everywhere.
The "bind" and "bind-process" parsers will have to be adjusted, though
maybe not completely changed if we later want to support thread groups
for large NUMA machines. Some stats socket restrictions were removed,
and the doc was updated according to what was done. A few places in the
doc still refer to nbproc and will have to be revisited. The master-worker
code also refers to the process number to distinguish between master and
workers and will have to be carefully adjusted. The MAX_PROCS macro was
reset to 1, this will at least reduce the size of some remaining arrays.
Two regtests were dependieng on this directive, one with an explicit
"nbproc 1" and another one testing the master's CLI using nbproc 4.
Both were adapted.
Commit ab0a5192a ("MEDIUM: config: mark "grace" as deprecated") marked
the "grace" keyword as deprecated in 2.3, tentative removal for 2.4
with a hard deadline in 2.5, so let's remove it and return an error now.
This old and outdated feature was incompatible with soft-stop, reload
and socket transfers, and keeping it forced ugly hacks in the lower
layers of the protocol stack.
This patch add a ref into servers to register them onto the
record answer item used to set their hostnames.
It also adds a head list into 'srvrq' to register servers free
to be affected to a SRV record.
A head of a tree is also added to srvrq to put servers which
present a hotname in server state file. To re-link them fastly
to the matching record as soon an item present the same name.
This results in better performances on SRV record response
parsing.
This is an optimization but it could avoid to trigger the haproxy's
internal wathdog in some circumstances. And for this reason
it should be backported as far we can (2.0 ?)
This patch adds a head list into answer items on servers which use
this record to set their IPs. It makes lookup on duplicated ip faster and
allow to check immediatly if an item is still valid renewing the IP.
This results in better performances on A/AAAA resolutions.
This is an optimization but it could avoid to trigger the haproxy's
internal wathdog in some circumstances. And for this reason
it should be backported as far we can (2.0 ?)
When an HTX block is expanded, a defragmentation may be performed first to
have enough space to copy the new data. When it happens, the meta data of
the HTX message must take account of the new data length but copied data are
still unchanged at this stage (because we need more space to update the
message content). And here there is a bug because the meta data are updated
by the caller. It means that when the blocks content is copied, the new
length is already set. Thus a block larger than the reality is copied and
data outside the buffer may be accessed, leading to a crash.
To fix this bug, htx_defrag() is updated to use an extra argument with the
new meta data to use for the referenced block. Thus the caller does not need
to update the HTX message by itself. However, it still have to update the
data.
Most of time, the bug will be encountered in the HTTP compression
filter. But, even if it is highly unlikely, in theory it is also possible to
hit it when a HTTP header (or only its value) is replaced or when the
start-line is changed.
This patch must be backported as far as 2.0.
A tiny change in commit 6af81f80f ("MEDIUM: errors: implement parsing
context type") triggered an awful bug in gcc 5 and below (4.7.4 to 5.5
confirmed affected, at least on aarch64/mips/x86_64) causing the startup
to loop forever in acl_find_target().
This was tracked down to the acl.c file seeing a different definition
of the struct proxy than other files. The reason for this is that it
sees an unpacked "enum obj_type" (4 bytes) while others see it packed
(1 byte), thus all fields in the struct are having a different
alignment, and the "acl" list is shifted one pointer to the next struct
and seems to loop onto itself.
The commit above did nothing more than adding "enum obj_type *obj" in a
new struct without including obj_type.h, and that was apparently enough
for the compiler to internally declare obj_type as a regular enum and
silently ignore the packed attribute that it discovers later, so depending
on the order of includes, some files would see it as 1 byte and others as
4.
This patch simply adds the missing include but due to the nature of the
bug, probably that creating a special "packed_enum" definition to disable
the packed attribute on such compilers could be a safer option.
No backport is needed as this is only in -dev.
The ifdefs surrounding the "show ssl ocsp-response" functionality that
were supposed to disable the code with BoringSSL were built the wrong
way.
It does not need to be backported.
Now that the modified lockless variant does not need a DWCAS anymore,
there's no reason to keep the much slower locked version, so let's
just get rid of it.
In GH issue #1275, Fabiano Nunes Parente provided a nicely detailed
report showing reproducible crashes under musl. Musl is one of the libs
coming with a simple allocator for which we prefer to keep the shared
cache. On x86 we have a DWCAS so the lockless implementation is enabled
for such libraries.
And this implementation has had a small race since day one: the allocator
will need to read the first object's <next> pointer to place it into the
free list's head. If another thread picks the same element and immediately
releases it, while both the local and the shared pools are too crowded, it
will be freed to the OS. If the libc's allocator immediately releases it,
the memory area is unmapped and we can have a crash while trying to read
that pointer. However there is no problem as long as the item remains
mapped in memory because whatever value found there will not be placed
into the head since the counter will have changed.
The probability for this to happen is extremely low, but as analyzed by
Fabiano, it increases with the buffer size. On 16 threads it's relatively
easy to reproduce with 2MB buffers above 200k req/s, where it should
happen within the first 20 seconds of traffic usually.
This is a structural issue for which there are two non-trivial solutions:
- place a read lock in the alloc call and a barrier made of lock/unlock
in the free() call to force to serialize operations; this will have
a big performance impact since free() is already one of the contention
points;
- change the allocator to use a self-locked head, similar to what is
done in the MT_LISTS. This requires two memory writes to the head
instead of a single one, thus the overhead is exactly one memory
write during alloc and one during free;
This patch implements the second option. A new POOL_DUMMY pointer was
defined for the locked pointer value, allowing to both read and lock it
with a single xchg call. The code was carefully optimized so that the
locked period remains the shortest possible and that bus writes are
avoided as much as possible whenever the lock is held.
Tests show that while a bit slower than the original lockless
implementation on large buffers (2MB), it's 2.6 times faster than both
the no-cache and the locked implementation on such large buffers, and
remains as fast or faster than the all implementations when buffers are
48k or higher. Tests were also run on arm64 with similar results.
Note that this code is not used on modern libcs featuring a fast allocator.
A nice benefit of this change is that since it removes a dependency on
the DWCAS, it will be possible to remove the locked implementation and
replace it with this one, that is then usable on all systems, thus
significantly increasing their performance with large buffers.
Given that lockless pools were introduced in 1.9 (not supported anymore),
this patch will have to be backported as far as 2.0. The code changed
several times in this area and is subject to many ifdefs which will
complicate the backport. What is important is to remove all the DWCAS
code from the shared cache alloc/free lockless code and replace it with
this one. The pool_flush() code is basically the same code as the
allocator, retrieving the whole list at once. If in doubt regarding what
barriers to use in older versions, it's safe to use the generic ones.
This patch depends on the following previous commits:
- MINOR: pools: do not maintain the lock during pool_flush()
- MINOR: pools: call malloc_trim() under thread isolation
- MEDIUM: pools: use a single pool_gc() function for locked and lockless
The last one also removes one occurrence of an unneeded DWCAS in the
code that was incompatible with this fix. The removal of the now unused
seq field will happen in a future patch.
Many thanks to Fabiano for his detailed report, and to Olivier for
his help on this issue.
Since the code was reorganized, DEBUG_UAF was still tested in the locked
pool code despite pools being disabled when DEBUG_UAF is used. Let's move
the test to pool_put_to_os() which is the one that is always called in
this condition.
The impact is only a possible misleading analysis during a troubleshooting
session due to a missing double-frees or free of const area test that is
normally already dealt with by the underlying code anyway. In practice it's
unlikely anyone will ever notice.
This should only be backported to 2.4.
This patch adds the "show ssl ocsp-response [<id>]" CLI command. This
command can be used to display the IDs of the OCSP tree entries along
with details about the entries' certificate ID (issuer's name and key
hash + serial number), or to display the details of a single
ocsp-response if an ID is given. The details displayed in this latter
case are the ones shown by a "openssl ocsp -respin <ocsp-response>
-text" call.
Since commit 04a5a44 ("BUILD: ssl: use HAVE_OPENSSL_KEYLOG instead of
OpenSSL versions") the "tune.ssl.keylog" feature is broken because
HAVE_OPENSSL_KEYLOG does not exist.
Replace this by a HAVE_SSL_KEYLOG which is defined in openssl-compat.h.
Also add an error when not built with the right openssl version.
Must be backported as far as 2.3.
Change the algorithm for the generation of the user messages context
prefix. Remove the dubious API relying on optional printf positional
arguments. This may be non portable, and in fact the CI glibc crashes
with the following error when some arguments are not present in the
format string :
"invalid %N$ use detected".
Now, a fixed buffer attached to the context instance is allocated once
for the program lifetime. Then call repeatedly snprintf with the
optional arguments of context if present to build the context string.
The buffer is deallocated via a per-thread free handler.
This does not need to be backported.
This patch adds the `-cc` (check condition) argument to evaluate conditions on
startup and return the result as the exit code.
As an example this can be used to easily check HAProxy's version in scripts:
haproxy -cc 'version_atleast(2.4)'
This resolves GitHub issue #1246.
Co-authored-by: Tim Duesterhus <tim@bastelstu.be>
Create a parsing_ctx structure. This type is used to store information
about the current file/line parsed. A global context is created and
can be manipulated when haproxy is in STARTING mode. When starting is
over, the context is resetted and should not be accessed anymore.
The user messages buffer is used to store the stderr output after the
starting is over. Each thread has it own user messages buffer. Add some
functions to add a new message, retrieve and clear the content.
The user messages buffer primary goal is to be consulted by CLI
handlers. Each handlers using it must clear the buffer before starting
its operation.
Move functions related to errors output on stderr from log.c to a newly
created errors.c file. It targets print_message and
ha_alert/warning/notice/diag functions and related startup_logs feature.
A memory allocation failure happening in chash_init_server_tree while
trying to allocate a server's lb_nodes item used in consistent hashing
would have resulted in a crash. This function is only called during
configuration parsing.
It was raised in GitHub issue #1233.
It could be backported to all stable branches.
A memory allocation failure happening in mworker_env_to_proc_list when
trying to allocate a mworker_proc would have resulted in a crash. This
function is only called during init.
It was raised in GitHub issue #1233.
It could be backported to all stable branches.
A memory allocation failure happening during peers_register_table would
have resulted in a crash. This function is only called during init.
It was raised in GitHub issue #1233.
It could be backported to all stable branches.
Two calloc calls were not checked in the srv_parse_source function.
Considering that this function could be called at runtime through a
dynamic server creation via the CLI, this could lead to an unfortunate
crash.
It was raised in GitHub issue #1233.
It could be backported to all stable branches even though the runtime
crash could only happen on branches where dynamic server creation is
possible.
b_slow_realign() function may be used to realign a buffer with a given
amount of output data, eventually 0. In such case, the head is set to
0. This function is not designed to be used with input only buffers, like
those used in the muxes. It is the purpose of b_slow_realign_ofs()
function. It does almost the same, realign a buffer. But it do so by setting
the buffer head to a specific offset.
h1 parsing functions (h1_parse_msg_*) returns the number of bytes parsed or
0 if nothing is parsed because an error occurred or some data are
missing. But they never return negative values. Thus, instead of a signed
integer, these function now return a size_t value.
The H1 and FCGI muxes are updated accordingly. Note that h1_parse_msg_data()
has been slightly adapted because the parsing of chunked messages still need
to handle negative values when a parsing error is reported by
h1_parse_chunk_size() or h1_skip_chunk_crlf().
The output of "show map/acl" now contains the 'entry_cnt' value that
represents the count of all the entries for each map/acl, not just the
active ones, which means that it also includes entries currently being
added.
The first item inserted into an ebtree will be inserted directly below
the root, which is a simple struct eb_root which only holds two branch
pointers (left and right).
If we try to find a duplicated entry to this first leaf through a
ebmb_next_dup, our leaf_p pointer will point to the eb_root instead of a
complete eb_node so we cannot look for the bit part of our leaf_p since
it would try to cast our eb_root into an eb_node and perform an out of
bounds access when reading "eb_root_to_node(eb_untag(t,EB_LEFT)))->bit".
This bug was found by address sanitizer running on a CRL hot update VTC
test.
Note that the bug has been there since the import of the eb_next_dup()
and eb_prev_dup() function in 1.5-dev19 by commit 2b5702030 ("MINOR:
ebtree: add new eb_next_dup/eb_prev_dup() functions to visit duplicates").
It can be backported to all stable branches.
The following functions used in CA/CRL file hot update were not defined
in OpenSSL 1.0.2 so they need to be defined in openssl-compat :
- X509_CRL_get_signature_nid
- X509_CRL_get0_lastUpdate
- X509_CRL_get0_nextUpdate
- X509_REVOKED_get0_serialNumber
- X509_REVOKED_get0_revocationDate
This patch adds the "set ssl crl-file" and "commit ssl crl-file"
commands, following the same logic as the certificate and CA file update
equivalents.
When trying to update a Certificate Revocation List (CRL) file via a
"set" command, we start by looking for the entry in the CA file tree and
then building a new cafile_entry out of the payload, without adding it
to the tree yet. It will only be added when a "commit" command is
called.
During a "commit" command, we insert the newly built cafile_entry in the
CA file tree while keeping the previous entry. We then iterate over all
the instances that used the CRL file and rebuild a new one and its
dedicated SSL context for every one of them.
When all the contexts are properly created, the old instances get
replaced by the new ones and the old CRL file is removed from the tree.
The CA files and CRL files are stored in the same cafile_tree so this
patch adds a new field the the cafile_entry structure that specifies the
type of the entry. Since a ca-file can also have some CRL sections, the
type will be based on the option used to load the file and not on its
content (ca-file vs crl-file options).
This patch adds the "set ssl ca-file" and "commit ssl ca-file" commands,
following the same logic as the certificate update equivalents.
When trying to update a ca-file entry via a "set" command, we start by
looking for the entry in the cafile_tree and then building a new
cafile_entry out of the given payload. This new object is not added to
the cafile_tree until "commit" is called.
During a "commit" command, we insert the newly built cafile_entry in the
cafile_tree, while keeping the previous entry as well. We then iterate
over all the instances linked in the old cafile_entry and rebuild a new
ckch instance for every one of them. The newly inserted cafile_entry is
used for all those new instances and their respective SSL contexts.
When all the contexts are properly created, the old instances get
replaced by the new ones and the old cafile_entry is removed from the
tree.
This fixes a subpart of GitHub issue #1057.
Adds a way to insert a new uncommitted cafile_entry in the tree. This
entry will be the one fetched by any lookup in the tree unless the
oldest cafile_entry is explicitely looked for. This way, until a "commit
ssl ca-file" command is completed, there could be two cafile_entries
with the same path in the tree, the original one and the newly updated
one.
The updated CA content coming from the CLI during a ca-file update will
directly be in memory and not on disk so the way CAs are loaded in a
cafile_entry for now (via X509_STORE_load_locations calls) cannot be
used.
This patch adds a way to fill a cafile_entry directly from memory and to
load the contained certificate and CRL sections into an SSL store.
CRL sections are managed as well as certificates in order to mimic the
way CA files are processed when specified in an option. Indeed, when
parsing a CA file given through a ca-file or ca-verify-file option, we
iterate over the different sections in ssl_set_cert_crl_file and load
them regardless of their type. This ensures that a file that was
properly parsed when given as an option will also be accepted by the
CLI.
In order for the link between the cafile_entry and the default ckch
instance to be built, we need to give a pointer to the instance during
the ssl_sock_prepare_ctx call.
Each ca-file entry of the tree will now hold a list of the ckch
instances that use it so that we can iterate over them when updating the
ca-file via a cli command. Since the link between the SSL contexts and
the CA file tree entries is only built during the ssl_sock_prepare_ctx
function, which are called after all the ckch instances are created, we
need to add a little post processing after each ssl_sock_prepare_ctx
that builds the link between the corresponding ckch instance and CA file
tree entries.
In order to manage the ca-file and ca-verify-file options, any ckch
instance can be linked to multiple CA file tree entries and any CA file
entry can link multiple ckch instances. This is done thanks to a
dedicated list of ckch_inst references stored in the CA file tree
entries over which we can iterate (during an update for instance). We
avoid having one of those instances go stale by keeping a list of
references to those references in the instances.
When deleting a ckch_inst, we can then remove all the ckch_inst_link
instances that reference it, and when deleting a cafile_entry, we
iterate over the list of ckch_inst reference and clear the corresponding
entry in their own list of ckch_inst_link references.
This patch moves all the ssl_store related code to ssl_ckch.c since it
will mostly be used there once the CA file update CLI commands are all
implemented. It also makes the cafile_entry structure visible as well as
the cafile_tree.
stdint.h is not as portable as inttypes.h. It doesn't exist at least
on AIX 5.1 and Solaris 7, while inttypes.h is present there and does
include stdint.h on platforms supporting it.
This is equivalent to libslz upstream commit e36710a ("slz: use
inttypes.h instead of stdint.h")
On ARM with native CRC support, no need to inflate the executable with
a 4kB CRC table, let's just drop it.
This is slz upstream commit d8715db20b2968d1f3012a734021c0978758f911.
