Most calls to hap_register_post_check(), hap_register_post_deinit(),
hap_register_per_thread_init(), hap_register_per_thread_deinit() can
be done using initcalls and will not require a constructor anymore.
Let's create a set of simplified macros for this, called respectively
REGISTER_POST_CHECK, REGISTER_POST_DEINIT, REGISTER_PER_THREAD_INIT,
and REGISTER_PER_THREAD_DEINIT.
Some files were not modified because they wouldn't benefit from this
or because they conditionally register (e.g. the pollers).
Most register_build_opts() calls use static strings. These ones were
replaced with a trivial REGISTER_BUILD_OPTS() statement adding the string
and its call to the STG_REGISTER section. A dedicated section could be
made for this if needed, but there are very few such calls for this to
be worth it. The calls made with computed strings however, like those
which retrieve OpenSSL's version or zlib's version, were moved to a
dedicated function to guarantee they are called late in the process.
For example, the SSL call probably requires that SSL_library_init()
has been called first.
Using __decl_spinlock(), __decl_rwlock(), __decl_aligned_spinlock()
and __decl_aligned_rwlock(), one can now simply declare a spinlock
or an rwlock which will automatically be initialized at boot time
by calling the ha_spin_init() or ha_rwlock_init() callback. The
"aligned" variants enforce a 64-byte alignment on the lock.
This patch adds ha_spin_init() and ha_rwlock_init() which are used as
a callback to initialise locks at boot time. They perform exactly the
same as HA_SPIN_INIT() or HA_RWLOCK_INIT() but from within a real
function.
We currently have to deal with multiple initialization stages in a way
that can be confusing, because certain parts rely on others having been
properly initialized. Most calls consist in adding lists to existing
lists, whose heads are initialized in the declaration so this is easy.
But some calls create new pools and require pools to be properly
initialized. Pools currently are thread-local and as such cannot be
pre-initialized, requiring run-time checks.
All this could be simplified by using multiple boot stages and allowing
functions to be registered at various stages.
One approach might be to use gcc's constructor priorities, but this
requires gcc >= 4.3 which eliminates a wide spectrum of working compilers,
and some versions of certain compilers (like clang 3.0) are known for
silently ignore these priorities.
Instead we can use our own init function registration mechanism. A first
attempt was made using register_function() calls in all constructors but
this made the code more painful.
This patch's approach is different. It creates sections containing
arrays of pointers to "initcall" descriptors. An initcall contains a
pointer to a function and an argument. Each section corresponds to a
specific initialization stage. Each module creates such descriptors
for various calls it requires. The main() function starts by scanning
each of these sections in turn to process these initcalls.
This will make it possible to remove many constructors from various
modules, by simply placing initcalls for the requested functions next
to the keyword lists that need to be called.
A first attempt was made by placing the initcalls directly into the
sections instead of creating an array of pointers, but it becomes
sensitive to the array's alignment which depends on the compiler and
the linker, so it seems too fragile.
For now we support 6 init stages :
- STG_PREPARE : preset variables, tables and list heads
- STG_LOCK : initialize spinlocks and rwlocks
- STG_ALLOC : allocate the required structures
- STG_POOL : create pools
- STG_REGISTER : register static lists (keywords etc)
- STG_INIT : subsystems normal initialization
These ones are declared directly in the files where they are needed
using one of the INITCALL* macros, passing 0 to 3 pointers as
arguments.
The API should possibly be extended to support a return value to give
a status to the caller, and to support a unified API, possibly a bit
more flexibility in the arguments. In this case it might make sense to
support a set of macros to register functions having a different API
and to pass the function type in the initcall itself.
Special thanks to Olivier for showing how to scan sections as this is
not something particularly well documented and exactly what I've been
missing to achieve this.
Building with musl and gcc-5.3 for MIPS returns this :
include/common/buf.h: In function 'b_dist':
include/common/buf.h:252:2: error: unknown type name 'ssize_t'
ssize_t dist = to - from;
^
Including stdint or stddef is not sufficient there to get ssize_t,
unistd is needed as well. It's likely that other platforms will have
the same issue. This patch also addresses it in ist.h and memory.h.
Building on 32 bits gives this :
include/proto/htx.h: In function 'htx_dump':
include/proto/htx.h:443:25: warning: format '%lu' expects argument of type 'long unsigned int', but argument 8 has type 'uint64_t {aka long long unsigned int}' [-Wformat=]
fprintf(stderr, "htx:%p [ size=%u - data=%u - used=%u - wrap=%s - extra=%lu]\n",
^
In htx_dump(), fprintf() uses %lu but the value is an uint64_t so it
doesn't match on 32-bit. Let's cast this to unsigned long long and use
%llu instead.
When we create a connection, if we have to defer the conn_stream and the
mux creation until we can decide it (ie until the SSL handshake is done, and
the ALPN is decided), store the connection in the stream_interface, so that
we're sure we can destroy it if needed.
If an ALPN (or a NPN) was chosen for a server, defer choosing the mux until
after the SSL handshake is done, and the ALPN/NPN has been negociated, so
that we know which mux to pick.
In some situations, especially when dealing with low latency on processors
supporting a variable frequency or when running inside virtual machines,
each time the process waits for an I/O using the poller, the processor
goes back to sleep or is offered to another VM for a long time, and it
causes excessively high latencies.
A solution to this provided by this patch is to enable busy polling using
a global option. When busy polling is enabled, the pollers never sleep and
loop over themselves waiting for an I/O event to happen or for a timeout
to occur. On multi-processor machines it can significantly overheat the
processor but it usually results in much lower latencies.
A typical test consisting in injecting traffic over a single connection at
a time over the loopback shows a bump from 4640 to 8540 connections per
second on forwarded connections, indicating a latency reduction of 98
microseconds for each connection, and a bump from 12500 to 21250 for
locally terminated connections (redirects), indicating a reduction of
33 microseconds.
It is only usable with epoll and kqueue because select() and poll()'s
API is not convenient for such usages, and the level of performance they
are used in doesn't benefit from this anyway.
The option, which obviously remains disabled by default, can be turned
on using "busy-polling" in the global section, and turned off later
using "no busy-polling". Its status is reported in "show info" to help
troubleshooting suspicious CPU spikes.
Right now we measure for each task the cumulated time spent waiting for
the CPU and using it. The timestamp uses a 64-bit integer to report a
nanosecond-level date. This is only enabled when "profiling.tasks" is
enabled, and consumes less than 1% extra CPU on x86_64 when enabled.
The cumulated processing time and wait time are reported in "show sess".
The task's counters are also reset when an HTTP transaction is reset
since the HTTP part pretends to restart on a fresh new stream. This
will make sure we always report correct numbers for each request in
the logs.
This is a new global setting which enables or disables CPU profiling
per task. For now it only sets/resets the variable based on the global
option "profiling.tasks" and supports showing it as well as setting it
from the CLI using "show profiling" and "set profiling". The option will
be used by a future commit. It was done in a way which should ease future
addition of profiling options.
Since we know the time it takes to process everything between two poll()
calls, we can use this as the max latency measurement any task will
experience and average it.
This code does this, and reports in "show activity" the average of this
loop time over the last 1024 poll() loops, for each thread. It will vary
quickly at high loads and slowly under low to moderate loads, depending
on the rate at which poll() is called. The latency a task experiences
is expected to be half of this on average.
At the moment the situation with activity measurement is quite tricky
because the struct activity is defined in global.h and declared in
haproxy.c, with operations made in time.h and relying on freq_ctr
which are defined in freq_ctr.h which itself includes time.h. It's
barely possible to touch any of these files without breaking all the
circular dependency.
Let's move all this stuff to activity.{c,h} and be done with it. The
measurement of active and stolen time is now done in a dedicated
function called just after tv_before_poll() instead of mixing the two,
which used to be a lazy (but convenient) decision.
No code was changed, stuff was just moved around.
Just found that proto/cli.h doesn't build if types/cli.h is not also
included by the caller, as it uses cli_kw_list is used in arguments.
But it's also true for a few other ones like mworker_proc, stream,
and channel, so let's fix this.
The new function signal_unregister() removes every handlers assigned to
a signal. Once the handler list of the signal is empty, the signal is
ignored with SIG_IGN.
In the output of 'show fd', the worker CLI's socketpair was still
handled by an "unknown" function. That can be really confusing during
debug. Fixed it by showing "mworker_accept_wrapper" instead.
The mworker waitpid mode (which is used when a reload failed to apply
the new configuration) was still using a specific initialisation path.
That's a problem since we use a polling loop in the master now, the
master proxy is not initialized and the master CLI is not activated.
This patch removes the initialisation code of the wait mode and
introduce the MODE_MWORKER_WAIT in order to use the same init path as
the MODE_MWORKER with some exceptions. It allows to use the master proxy
and the master CLI during the waitpid mode.
This was the largest function of the whole file, taking a rough second
to build alone. Let's move it to a distinct file along with a few
dependencies. Doing so saved about 2 seconds on the total build time.
The config parser is the largest file to build and its build dominates
the total project's build time. Let's start to split it into multiple
smaller pieces by extracting the "global" section parser into a new
file called "cfgparse-global.c". This removes 1/4th of the file's build
time.
It does the same than smp_prefetch_http but for HTX messages. It can be called
from an HTTP proxy or a TCP proxy. For HTTP proxies, the parsing is handled by
the mux, so it does nothing but wait. For TCP proxies, it tries to parse an HTTP
message and to convert it in a temporary HTX message. Sample fetches will use
this temporary variable to do their job.
It is more or less the same than legacy version but adapted to be called from
HTX analyzers. In the legacy version of this function, we switch on the HTX code
when applicable.
It is more or less the same than legacy version but adapted to be called from
HTX analyzers. In the legacy version of this function, we switch on the HTX code
when applicable.
It is more or less the same than legacy versions but adapted to be called from
HTX analyzers. In the legacy versions of these functions, we switch on the HTX
code when applicable.
It is more or less the same than legacy versions but adapted to be called from
HTX analyzers. In the legacy versions of these functions, we switch on the HTX
code when applicable.
This file will host all functions to manipulate HTTP messages using the HTX
representation. Functions in this file will be able to be called from anywhere
and are mainly related to the HTTP semantics.
The internal representation of an HTTP message, called HTX, is a structured
representation, unlike the old one which is a raw representation of
messages. Idea is to have a version-agnostic representation of the HTTP
messages, which can be easily used by to handle HTTP/1, HTTP/2 and hopefully
QUIC messages, and communication from one of them to another.
In this patch, we add types to define the internal representation itself and the
main functions to manipulate them.
Now, the connection mode is detected in the mux and not in HTX analyzers
anymore. Keep-alive connections are now managed by the mux. A new stream is
created for each transaction. This removes the most important part of the
synchronization between channels and the HTTP transaction cleanup. These changes
only affect the HTX part (proto_htx.c). Legacy HTTP analyzers remain untouched
for now.
On the client-side, the mux is responsible to create new streams when a new
request starts. It is also responsible to parse and update the "Connection:"
header of the response. On the server-side, the mux is responsible to parse and
update the "Connection:" header of the request. Muxes on each side are
independent. For now, there is no connection pool on the server-side, so it
always close the server connection.
For now, these analyzers are just copies of the legacy HTTP analyzers. But,
during the HTTP refactoring, it will be the main place where it will be
visible. And in legacy analyzers, the macro IS_HTX_STRM is used to know if the
HTX version should be called or not.
Note: the following commits were applied to proto_http.c after this patch
was developed and need to be studied to see if an adaptation to htx
is required :
fd9b68c BUG/MINOR: only mark connections private if NTLM is detected
To prepare the refactoring of the code handling HTTP messages, these macros will
help to use HTX functions instead of legacy ones when the new HTX internal
representation is in use. To do so, for a given stream, we will check if its
frontend has the option PR_O2_USE_HTX. It is useless to test backend options
because it is not possible to mix the HTX representation and the legacy one
(i.e, having an HTX frontend and a legacy backend or vice versa).
The flag CS_FL_READ_PARTIAL can be set by the mux on the conn_stream to notify
the stream interface that some data were received. Is is used in si_cs_recv to
re-arm read timeout on the channel.
These 2 functions are pretty naive. They only split a start-line into its 3
substrings or a header line into its name and value. Spaces before and after
each part are skipped. No CRLF at the end are expected.
By setting the flag CO_RFL_KEEP_RSV when calling mux->rcv_buf, the
stream-interface notifies the mux it must keep some space to preserve the
buffer's reserve. This flag is only useful for multiplexers handling structured
data, because in such case, the stream-interface cannot know the real amount of
free space in the channel's buffer.
By setting the flag CO_RFL_BUF_FLUSH when calling mux->rcv_buf, the
stream-interface notifies the mux it should flush its buffers without reading
more data. This flag is set when the SI want to use the kernel TCP splicing to
forward data. Of course, the mux can respect it or not, depending on its
state. It's just an information.
Do not destroy the connection when we're about to destroy a stream. This
prevents us from doing keepalive on server connections when the client is
using HTTP/2, as a new stream is created for each request.
Instead, the session is now responsible for destroying connections.
When reusing connections, the attach() mux method is now used to create a new
conn_stream.
Introduce a new field in session, "srv_conn", and a linked list of sessions
in the connection. It will be used later when we'll switch connections
from being managed by the stream, to being managed by the session.
Add a new method for mux, avail_streams, that returns the number of streams
still available for a mux.
For the mux_pt, it'll return 1 if the connection is in idle, or 0. For
the H2 mux, it'll return the max number of streams allowed, minus the number
of streams currently in use.
Remaining calls to si_cant_put() were all for lack of room and were
turned to si_rx_room_blk(). A few places where SI_FL_RXBLK_ROOM was
cleared by hand were converted to si_rx_room_rdy().
The now unused si_cant_put() function was removed.
The channel can disable reading from the stream-interface using various
methods, such as :
- CF_DONT_READ
- !channel_may_recv()
- and possibly others
Till now this was done by mangling SI_FL_RX_WAIT_EP which is not
appropriate at all since it's not the stream interface which decides
whether it wants to deliver data or not. Some places were also wrongly
relying on SI_FL_RXBLK_ROOM since it was the only other alternative,
but it's not suitable for CF_DONT_READ.
Let's use the SI_FL_RXBLK_CHAN flag for this instead. It will properly
prevent the stream interface from being woken up and reads from
subscribing to more receipt without being accidently removed. It is
automatically reset if CF_DONT_READ is not set in stream_int_notify().
The code is not trivial because it splits the logic between everything
related to buffer contents (channel_is_empty(), CF_WRITE_PARTIAL, etc)
and buffer policy (CF_DONT_READ). Also it now needs to decide timeouts
based on any blocking flag and not just SI_FL_RXBLK_ROOM anymore.
It looks like this patch has caused a minor performance degradation on
connection rate, which possibly deserves being investigated deeper as
the test conditions are uncertain (e.g. slightly more subscribe calls?).
Till now we were using si_done_put() upon shutr, but these flags could
be reset upon next activity. Now let's switch to SI_FL_RXBLK_SHUT which
doesn't go away. It's also set in stream_int_update() in case a shutr
condition is detected.
The now unused si_done_put() was removed.
Instead of checking complex conditions to call si_cs_recv() upon first
call, let's simply use si_rx_endp_ready() now that si_cs_recv() reports
it accurately, and add si_rx_blocked() to cover any blocking situation.
The stream interface used to conflate a missing buffer and lack of
buffer space into SI_FL_WAIT_ROOM but this causes difficulties as
these cannot be checked at the same moment and are not resolved at
the same moment either. Now we instead mark the buffer as presumably
available using si_rx_buff_rdy() and mark it as unavailable+requested
using si_rx_buff_blk().
The call to si_alloc_buf() was moved after si_stop_put(). This makes
sure that the SI_FL_RX_WAIT_EP flag is cleared on allocation failure so
that the function is called again if the callee fails to do its work.
The SI_FL_WANT_PUT flag is used in an awkward way, sometimes it's
set by the stream-interface to mean "I have something to deliver",
sometimes it's cleared by the channel to say "I don't want you to
send what you have", and it has to be set back once CF_DONT_READ
is cleared. This will have to be split between SI_FL_RX_WAIT_EP
and SI_FL_RXBLK_CHAN. This patch only replaces all uses of the
flag with its natural (but negated) replacement SI_FL_RX_WAIT_EP.
The code is expected to be strictly equivalent. The now unused flag
was completely removed.
The first ones are used to figure if a direction is blocked on the
stream interface for anything but the end point. The second ones are
used to detect if the end point is ready to receive/transmit. They
should be used instead of directly fiddling with the existing bits.
The plan is to have the following flags to describe why a stream interface
doesn't produce data :
- SI_FL_RXBLK_CHAN : the channel doesn't want it to receive
- SI_FL_RXBLK_BUFF : waiting for a buffer allocation to complete
- SI_FL_RXBLK_ROOM : more room is required in the channel to receive
- SI_FL_RXBLK_SHUT : input now closed, nothing new will come
- SI_FL_RX_WAIT_EP : waiting for the endpoint to produce more data
Applets like the CLI which consume complete commands at once and produce
large chunks of responses will for example be able to stop being woken up
by clearing SI_FL_WANT_GET and setting SI_FL_RXBLK_ROOM when the rx buffer
is full. Once called they will unblock WANT_GET. The flags were moved
together in readable form with the Rx bits using 2 hex digits and still
have some room to do a similar operation on the Tx path later, with the
WAIT_EP flag being represented alone on a digit.
This flag is not enough to describe all blocking situations, as can be
seen in each case we remove it. The muxes has taught us that using multiple
blocking flags in parallel will be much easier, so let's start to do this
now. This patch only renames this flags in order to make next changes more
readable.
We used to have enough of 16 bits, with 3 still available but it's
not possible to add the rx/tx blocking bits there. Let's extend the
format to 32 bits and slightly reorder the fields to maintain the
struct size to 64 bytes. Nothing else was changed.
This method is used to retrieve the first known good conn_stream from
the mux. It will be used to find the other end of a connection when
dealing with the proxy protocol for example.
There are still some unwelcome synchronous calls to si_cs_recv() in
process_stream(). Let's have a new function si_sync_recv() to perform
a synchronous receive call on a stream interface regardless of the type
of its endpoint, and move these calls there. For now it only implements
conn_streams since it doesn't seem useful to support applets there. The
function implements an extra check for the stream interface to be in an
established state before attempting anything.
An unstoppable listener is a listener which won't be stop during a soft
stop. The unstoppable_jobs variable is incremented and the listener
won't prevent the process to leave properly.
It is not a good idea to use this feature (the LI_O_NOSTOP flag) with a
listener that need to be bind again on another process during a soft
reload.
This patch allows a process to properly quit when some jobs are still
active, this feature is handled by the unstoppable_jobs variable, which
must be atomically incremented.
During each new iteration of run_poll_loop() the break condition of the
loop is now (jobs - unstoppable_jobs) == 0.
The unique usage of this at the moment is to handle the socketpair CLI
of a the worker during the stopping of the process. During the soft
stop, we could mark the CLI listener as an unstoppable job and still
handle new connections till every other jobs are stopped.
This patch implements http_apply_early_hint_rule() function is responsible of
building HTTP 103 Early Hint responses each time a "early-hint" rule is matched.
This patch adds a "early_hint" struct to "arg" union of "act_rule" struct
and parse "early-hint" http-request keyword with it using the same
code as for "(add|set)-header" parser.
When namespaces are disabled, support is still reported because the file
is built with almost nothing in it but built anyway. Instead of extending
the scope of the numerous ifdefs in this file, better avoid building it
when namespaces are diabled. In this case we define my_socketat() as an
inline function mapping directly to socket(). The struct netns_entry
still needs to be defined because it's used by various other functions
in the code.
This format is pretty similar to the previous "short" format except
that it also removes the severity level. Thus only the raw message is
sent. This is suitable for use in containers, where only the raw
information is expected and where the severity is supposed to come
from the file descriptor used.
This format is meant to be used with local file descriptors. It emits
messages only prefixed with a level, removing all the process name,
system name, date and so on. It is similar to the printk() format used
on Linux. It's suitable to be sent to a local logger compatible with
systemd's output format.
Note that the facility is still required but not used, hence it is
suggested to use "daemon" to remind that it's a local logger.
Example :
log stdout format short daemon # send everything to stdout
log stderr format short daemon notice # send important events to stderr
It's easy to detect when logs on some paths are lost as sendmsg() will
return EAGAIN. This is particularly true when sending to /dev/log, which
often doesn't support a big logging capacity. Let's keep track of these
and report the total number of dropped messages in "show info".
We exclusively use stream_int_update() now, the lower layers are not
called anymore so let's remove them, as well as si_update() which used
to be their wrapper.
The function used to be called in turn for each side of the stream, but
since it's called exclusively from process_stream(), it prevents us from
making use of the knowledge we have of the operations in progress for
each side, resulting in having to go all the way through functions like
stream_int_notify() which are not appropriate there.
That patch creates a new function, si_update_both() which takes two
stream interfaces expected to belong to the same stream, and processes
their flags in a more suitable order, but for now doesn't change the
logic at all.
The next step will consist in trying to reinsert the rest of the socket
layer-specific update code to ultimately update the flags correctly at
the end of the operation.
After careful inspection, it now seems OK to call si_chk_rcv() only when
SI_FL_WAIT_ROOM is cleared and SI_FL_WANT_PUT is set, since all identified
call places have already taken care of this.
Instead of clearing the SI_FL_WAIT_ROOM flag and losing the information
about the need from the producer to be woken up, we now call si_chk_rcv()
immediately. This is cheap to do and it could possibly be further improved
by only doing it when SI_FL_WAIT_ROOM was still set, though this will
require some extra auditing of the code paths.
The only remaining place where the flag was cleared without a call to
si_chk_rcv() is si_alloc_ibuf(), but since this one is called from a
receive path woken up from si_chk_rcv() or not having failed, the
clearing was not necessary anymore either.
And there was one place in stream_int_notify() where si_chk_rcv() was
called with SI_FL_WAIT_ROOM still explicitly set so this place was
adjusted in order to clear the flag prior to calling si_chk_rcv().
Now we don't have any situation where we randomly clear SI_FL_WAIT_ROOM
without trying to wake the other side up, nor where we call si_chk_rcv()
with the flag set, so this flag should accurately represent a failed
attempt at putting data into the buffer.
When CF_DONT_READ is set, till now we used to set SI_FL_WAIT_ROOM, which
is not appropriate since it would lose the subscribe status. Instead let's
clear SI_FL_WANT_PUT (just like applets do), and set the flag only when
CF_DONT_READ is cleared.
We have to do this in stream_int_update(), and in si_cs_io_cb() after
returning from si_cs_recv() since it would be a bit invasive to hack
this one for now. It must not be done in stream_int_notify() otherwise
it would re-enable blocked applets.
Last, when si_chk_rcv() is called, it immediately clears the flag before
calling ->chk_rcv() so that we are not tempted to uselessly loop on the
same call until the receive function is called. This is the same principle
as what is done with the applet scheduler.
This flag should already be cleared before calling the *chk_rcv() functions.
Before adapting all call places, let's first make sure si_chk_rcv() clears
it before calling them so that these functions do not have to check it again
and so that they do not adjust it. This function will only call the lower
layers if the SI_FL_WANT_PUT flag is present so that the endpoint can decide
not to be called (as done with applets).
There was an ambiguity in which functions of the si_ops struct could be
null or not. only ->update doesn't exist in one of the si_ops (the
embedded one), all others are always defined. ->shutr and ->shutw were
never tested. However ->chk_rcv() and ->chk_snd() were tested, causing
confusion about the proper way to wake the other side up if undefined
(which never happens).
Let's update the comments to state these functions are mandatory and
remove the offending checks.
We now do this on the si_cs_recv() path so that we always have
SI_FL_WANT_PUT properly set when there's a need to receive and
SI_FL_WAIT_ROOM upon failure.
It doesn't make sense to limit this code to applets, as any stream
interface can use it. Let's rename it by simply dropping the "applet_"
part of the name. No other change was made except updating the comments.
The buffer allocation callback appctx_res_wakeup() used to rely on old
tricks to detect if a buffer was already granted to an appctx, namely
by checking the task's state. Not only this test is not valid anymore,
but it's inaccurate.
Let's solely on SI_FL_WAIT_ROOM that is now set on allocation failure by
the functions trying to allocate a buffer. The buffer is now allocated on
the fly and the flag removed so that the consistency between the two
remains granted. The patch also fixes minor issues such as the function
being improperly declared inline(!) and the fact that using appctx_wakeup()
sets the wakeup reason to TASK_WOKEN_OTHER while we try to use TASK_WOKEN_RES
when waking up consecutive to a ressource allocation such as a buffer.
This function replaces stream_res_available(), which is used as a callback
for the buffer allocator. It now carefully checks which stream interface
was blocked on a buffer allocation, tries to allocate the input buffer to
this stream interface, and wakes the task up once such a buffer was found.
It will automatically remove the SI_FL_WAIT_ROOM flag upon success since
the info this flag indicates becomes wrong as soon as the buffer is
allocated.
The code is still far from being perfect because if a call to si_cs_recv()
fails to allocate a buffer, we'll still end up passing via process_stream()
again, but this could be improved in the future by using finer-grained
wake-up notifications.
The active peers output indicates both the number of established peers
connections and the number of peers connection attempts. The new counter
"ConnectedPeers" also indicates the number of currently connected peers.
This helps detect that some peers cannot be reached for example. It's
worth mentioning that this value changes over time because unused peers
are often disconnected and reconnected. Most of the time it should be
equal to ActivePeers.
Peers are the last type of activity which can maintain a job present, so
it's important to report that such an entity is still active to explain
why the job count may be higher than zero. Here by "ActivePeers" we report
peers sessions, which include both established connections and outgoing
connection attempts.
When an haproxy process doesn't stop after a reload, it's because it
still has some active "jobs", which mainly are active sessions, listeners,
peers or other specific activities. Sometimes it's difficult to troubleshoot
the cause of these issues (which generally are the result of a bug) only
because some indicators are missing.
This patch add the number of listeners, the number of jobs, and the stopping
status to the output of "show info". This way it becomes a bit easier to try
to narrow down the cause of such an issue should it happen. A typical use
case is to connect to the CLI before reloading, then issuing the "show info"
command to see what happens. In the normal situation, stopping should equal
1, jobs should equal 1 (meaning only the CLI is still active) and listeners
should equal zero.
The patch is so trivial that it could make sense to backport it to 1.8 in
order to help with troubleshooting.
It was reported here that authentication may fail when threads are
enabled :
https://bugzilla.redhat.com/show_bug.cgi?id=1643941
While I couldn't reproduce the issue, it's obvious that there is a
problem with the use of the non-reentrant crypt() function there.
On Linux systems there's crypt_r() but not on the vast majority of
other ones. Thus a first approach consists in placing a lock around
this crypt() call. Another patch may relax it when crypt_r() is
available.
This fix must be backported to 1.8. Thanks to Ryan O'Hara for the
quick notification.
Commit 27346b01a ("OPTIM: tools: optimize my_ffsl() for x86_64") optimized
my_ffsl() for intensive use cases in the scheduler, but as half of the times
I got it wrong so it counted bits the reverse way. It doesn't matter for the
scheduler nor fd cache but it broke cpu-map with threads which heavily relies
on proper ordering.
We should probably consider dropping support for gcc < 3.4 and switching
to builtins for these ones, though often they are as ambiguous.
No backport is needed.
