Adds global statements 'ssl-default-server-options' and
'ssl-default-bind-options' to force on 'server' and 'bind' lines
some ssl options.
Currently available options are 'no-sslv3', 'no-tlsv10', 'no-tlsv11',
'no-tlsv12', 'force-sslv3', 'force-tlsv10', 'force-tlsv11',
'force-tlsv12', and 'no-tls-tickets'.
Example:
global
ssl-default-server-options no-sslv3
ssl-default-bind-options no-sslv3
This converter escapes string to use it as json/ascii escaped string.
It can read UTF-8 with differents behavior on errors and encode it in
json/ascii.
json([<input-code>])
Escapes the input string and produces an ASCII ouput string ready to use as a
JSON string. The converter tries to decode the input string according to the
<input-code> parameter. It can be "ascii", "utf8", "utf8s", "utf8"" or
"utf8ps". The "ascii" decoder never fails. The "utf8" decoder detects 3 types
of errors:
- bad UTF-8 sequence (lone continuation byte, bad number of continuation
bytes, ...)
- invalid range (the decoded value is within a UTF-8 prohibited range),
- code overlong (the value is encoded with more bytes than necessary).
The UTF-8 JSON encoding can produce a "too long value" error when the UTF-8
character is greater than 0xffff because the JSON string escape specification
only authorizes 4 hex digits for the value encoding. The UTF-8 decoder exists
in 4 variants designated by a combination of two suffix letters : "p" for
"permissive" and "s" for "silently ignore". The behaviors of the decoders
are :
- "ascii" : never fails ;
- "utf8" : fails on any detected errors ;
- "utf8s" : never fails, but removes characters corresponding to errors ;
- "utf8p" : accepts and fixes the overlong errors, but fails on any other
error ;
- "utf8ps" : never fails, accepts and fixes the overlong errors, but removes
characters corresponding to the other errors.
This converter is particularly useful for building properly escaped JSON for
logging to servers which consume JSON-formated traffic logs.
Example:
capture request header user-agent len 150
capture request header Host len 15
log-format {"ip":"%[src]","user-agent":"%[capture.req.hdr(1),json]"}
Input request from client 127.0.0.1:
GET / HTTP/1.0
User-Agent: Very "Ugly" UA 1/2
Output log:
{"ip":"127.0.0.1","user-agent":"Very \"Ugly\" UA 1\/2"}
Commit 179085c ("MEDIUM: http: move Connection header processing earlier")
introduced a regression : the backend's HTTP mode is not considered anymore
when setting the session's HTTP mode, because wait_for_request() is only
called once, when the frontend receives the request (or when the frontend
is in TCP mode, when the backend receives the request).
The net effect is that in some situations when the frontend and the backend
do not work in the same mode (eg: keep-alive vs close), the backend's mode
is ignored.
This patch moves all that processing to a dedicated function, which is
called from the original place, as well as from session_set_backend()
when switching from an HTTP frontend to an HTTP backend in different
modes.
This fix must be backported to 1.5.
A config where a tcp-request rule appears after an http-request rule
might seem valid but it is not. So let's report a warning about this
since this case is hard to detect by the naked eye.
Commit bb2e669 ("BUG/MAJOR: http: correctly rewind the request body
after start of forwarding") was incorrect/incomplete. It used to rely on
CF_READ_ATTACHED to stop updating msg->sov once data start to leave the
buffer, but this is unreliable because since commit a6eebb3 ("[BUG]
session: clear BF_READ_ATTACHED before next I/O") merged in 1.5-dev1,
this flag is only ephemeral and is cleared once all analysers have
seen it. So we can start updating msg->sov again each time we pass
through this place with new data. With a sufficiently large amount of
data, it is possible to make msg->sov wrap and validate the if()
condition at the top, causing the buffer to advance by about 2GB and
crash the process.
Note that the offset cannot be controlled by the attacker because it is
a sum of millions of small random sizes depending on how many bytes were
read by the server and how many were left in the buffer, only because
of the speed difference between reading and writing. Also, nothing is
written, the invalid pointer resulting from this operation is only read.
Many thanks to James Dempsey for reporting this bug and to Chris Forbes for
narrowing down the faulty area enough to make its root cause analysable.
This fix must be backported to haproxy 1.5.
Sometimes it would be convenient to have a log counter so that from a log
server we know whether some logs were lost or not. The frontend's log counter
serves exactly this purpose. It's incremented each time a traffic log is
produced. If a log is disabled using "http-request set-log-level silent",
the counter will not be incremented. However, admin logs are not accounted
for. Also, if logs are filtered out before being sent to the server because
of a minimum level set on the log line, the counter will be increased anyway.
The counter is 32-bit, so it will wrap, but that's not an issue considering
that 4 billion logs are rarely in the same file, let alone close to each
other.
Just by moving a few struct members around, we can avoid 32-bit holes
between 64-bit pointers and shrink the struct size by 48 bytes. That's
not huge but that's for free, so let's do it.
There are two sample commands to get information about the presence of a
client certificate.
ssl_fc_has_crt is true if there is a certificate present in the current
connection
ssl_c_used is true if there is a certificate present in the session.
If a session has stopped and resumed, then ssl_c_used could be true, while
ssl_fc_has_crt is false.
In the client byte of the TLS TLV of Proxy Protocol V2, there is only one
bit to indicate whether a certificate is present on the connection. The
attached patch adds a second bit to indicate the presence for the session.
This maintains backward compatibility.
[wt: this should be backported to 1.5 to help maintain compatibility
between versions]
Google's boringssl doesn't currently support OCSP, so
disable it if detected.
OCSP support may be reintroduced as per:
https://code.google.com/p/chromium/issues/detail?id=398677
In that case we can simply revert this commit.
Signed-off-by: Lukas Tribus <luky-37@hotmail.com>
If a source file includes proto/server.h twice or more, redefinition errors will
be triggered for such inline functions as server_throttle_rate(),
server_is_draining(), srv_adm_set_maint() and so on. Just move #endif directive
to the end of file to solve this issue.
Signed-off-by: Godbach <nylzhaowei@gmail.com>
Add support for http-request track-sc, similar to what is done in
tcp-request for backends. A new act_prm field was added to HTTP
request rules to store the track params (table, counter). Just
like for TCP rules, the table is resolved while checking for
config validity. The code was mostly copied from the TCP code
with the exception that here we also count the HTTP request count
and rate by hand. Probably that something could be factored out in
the future.
It seems like tracking flags should be improved to mark each hook
which tracks a key so that we can have some check points where to
increase counters of the past if not done yet, a bit like is done
for TRACK_BACKEND.
Some users want to add their own data types to stick tables. We don't
want to use a linked list here for performance reasons, so we need to
continue to use an indexed array. This patch allows one to reserve a
compile-time-defined number of extra data types by setting the new
macro STKTABLE_EXTRA_DATA_TYPES to anything greater than zero, keeping
in mind that anything larger will slightly inflate the memory consumed
by stick tables (not per entry though).
Then calling stktable_register_data_store() with the new keyword will
either register a new keyword or fail if the desired entry was already
taken or the keyword already registered.
Note that this patch does not dictate how the data will be used, it only
offers the possibility to create new keywords and have an index to
reference them in the config and in the tables. The caller will not be
able to use stktable_data_cast() and will have to explicitly cast the
stable pointers to the expected types. It can be used for experimentation
as well.
Daniel Dubovik reported an interesting bug showing that the request body
processing was still not 100% fixed. If a POST request contained short
enough data to be forwarded at once before trying to establish the
connection to the server, we had no way to correctly rewind the body.
The first visible case is that balancing on a header does not always work
on such POST requests since the header cannot be found. But there are even
nastier implications which are that http-send-name-header would apply to
the wrong location and possibly even affect part of the request's body
due to an incorrect rewinding.
There are two options to fix the problem :
- first one is to force the HTTP_MSG_F_WAIT_CONN flag on all hash-based
balancing algorithms and http-send-name-header, but there's always a
risk that any new algorithm forgets to set it ;
- the second option is to account for the amount of skipped data before
the connection establishes so that we always know the position of the
request's body relative to the buffer's origin.
The second option is much more reliable and fits very well in the spirit
of the past changes to fix forwarding. Indeed, at the moment we have
msg->sov which points to the start of the body before headers are forwarded
and which equals zero afterwards (so it still points to the start of the
body before forwarding data). A minor change consists in always making it
point to the start of the body even after data have been forwarded. It means
that it can get a negative value (so we need to change its type to signed)..
In order to avoid wrapping, we only do this as long as the other side of
the buffer is not connected yet.
Doing this definitely fixes the issues above for the requests. Since the
response cannot be rewound we don't need to perform any change there.
This bug was introduced/remained unfixed in 1.5-dev23 so the fix must be
backported to 1.5.
Currently we have stktable_fetch_key() which fetches a sample according
to an expression and returns a stick table key, but we also need a function
which does only the second half of it from a known sample. So let's cut the
function in two and introduce smp_to_stkey() to perform this lookup. The
first function was adapted to make use of it in order to avoid code
duplication.
When we were generating a hash, it was done using an unsigned long. When the hash was used
to select a backend, it was sent as an unsigned int. This made it difficult to predict which
backend would be selected.
This patch updates get_hash, and the hash methods to use an unsigned int, to remain consistent
throughout the codebase.
This fix should be backported to 1.5 and probably in part to 1.4.
Abstract namespace sockets ignore the shutdown() call and do not make
it possible to temporarily stop listening. The issue it causes is that
during a soft reload, the new process cannot bind, complaining that the
address is already in use.
This change registers a new pause() function for unix sockets and
completely unbinds the abstract ones since it's possible to rebind
them later. It requires the two previous patches as well as preceeding
fixes.
This fix should be backported into 1.5 since the issue apperas there.
In order to fix the abstact socket pause mechanism during soft restarts,
we'll need to proceed differently depending on the socket protocol. The
pause_listener() function already supports some protocol-specific handling
for the TCP case.
This commit makes this cleaner by adding a new ->pause() function to the
protocol struct, which, if defined, may be used to pause a listener of a
given protocol.
For now, only TCP has been adapted, with the specific code moved from
pause_listener() to tcp_pause_listener().
With all the goodies supported by logformat, people find that the limit
of 1024 chars for log lines is too short. Some servers do not support
larger lines and can simply drop them, so changing the default value is
not always the best choice.
This patch takes a different approach. Log line length is specified per
log server on the "log" line, with a value between 80 and 65535. That
way it's possibly to satisfy all needs, even with some fat local servers
and small remote ones.
This value was set in log.h without any #ifndef around, so when one
wanted to change it, a patch was needed. Let's move it to defaults.h
with the usual #ifndef so that it's easier to change it.
stktable_fetch_key() does not indicate whether it returns NULL because
the input sample was not found or because it's unstable. It causes trouble
with track-sc* rules. Just like with sample_fetch_string(), we want it to
be able to give more information to the caller about what it found. Thus,
now we use the pointer to a sample passed by the caller, and fill it with
the information we have about the sample. That way, even if we return NULL,
the caller has the ability to check whether a sample was found and if it is
still changing or not.
'ssl_sock_get_common_name' applied to a connection was also renamed
'ssl_sock_get_remote_common_name'. Currently, this function is only used
with protocol PROXYv2 to retrieve the client certificate's common name.
A further usage could be to retrieve the server certificate's common name
on an outgoing connection.
The support is all based on static responses. This doesn't add any
request / response logic to HAProxy, but allows a way to update
information through the socket interface.
Currently certificates specified using "crt" or "crt-list" on "bind" lines
are loaded as PEM files.
For each PEM file, haproxy checks for the presence of file at the same path
suffixed by ".ocsp". If such file is found, support for the TLS Certificate
Status Request extension (also known as "OCSP stapling") is automatically
enabled. The content of this file is optional. If not empty, it must contain
a valid OCSP Response in DER format. In order to be valid an OCSP Response
must comply with the following rules: it has to indicate a good status,
it has to be a single response for the certificate of the PEM file, and it
has to be valid at the moment of addition. If these rules are not respected
the OCSP Response is ignored and a warning is emitted. In order to identify
which certificate an OCSP Response applies to, the issuer's certificate is
necessary. If the issuer's certificate is not found in the PEM file, it will
be loaded from a file at the same path as the PEM file suffixed by ".issuer"
if it exists otherwise it will fail with an error.
It is possible to update an OCSP Response from the unix socket using:
set ssl ocsp-response <response>
This command is used to update an OCSP Response for a certificate (see "crt"
on "bind" lines). Same controls are performed as during the initial loading of
the response. The <response> must be passed as a base64 encoded string of the
DER encoded response from the OCSP server.
Example:
openssl ocsp -issuer issuer.pem -cert server.pem \
-host ocsp.issuer.com:80 -respout resp.der
echo "set ssl ocsp-response $(base64 -w 10000 resp.der)" | \
socat stdio /var/run/haproxy.stat
This feature is automatically enabled on openssl 0.9.8h and above.
This work was performed jointly by Dirkjan Bussink of GitHub and
Emeric Brun of HAProxy Technologies.
The pcreposix layer (in the pcre projetc) execute strlen to find
thlength of the string. When we are using the function "regex_exex*2",
the length is used to add a final \0, when pcreposix is executed a
strlen is executed to compute the length.
If we are using a native PCRE api, the length is provided as an
argument, and these operations disappear.
This is useful because PCRE regex are more used than POSIC regex.
This patch remove all references of standard regex in haproxy. The last
remaining references are only in the regex.[ch] files.
In the file src/checks.c, the original function uses a "pmatch" array.
In fact this array is unused. This patch remove it.
This patchs rename the "regex_exec" to "regex_exec2". It add a new
"regex_exec", "regex_exec_match" and "regex_exec_match2" function. This
function can match regex and return array containing matching parts.
Otherwise, this function use the compiled method (JIT or PCRE or POSIX).
JIT require a subject with length. PCREPOSIX and native POSIX regex
require a null terminted subject. The regex_exec* function are splited
in two version. The first version take a null terminated string, but it
execute strlen() on the subject if it is compiled with JIT. The second
version (terminated by "2") take the subject and the length. This
version adds a null character in the subject if it is compiled with
PCREPOSIX or native POSIX functions.
The documentation of posix regex and pcreposix says that the function
returns 0 if the string matche otherwise it returns REG_NOMATCH. The
REG_NOMATCH macro take the value 1 with posix regex and the value 17
with the pcreposix. The documentaion of the native pcre API (used with
JIT) returns a negative number if no match, otherwise, it returns 0 or a
positive number.
This patch fix also the return codes of the regex_exec* functions. Now,
these function returns true if the string match, otherwise it returns
false.
This patch adds two new actions to http-request and http-response rulesets :
- replace-header : replace a whole header line, suited for headers
which might contain commas
- replace-value : replace a single header value, suited for headers
defined as lists.
The match consists in a regex, and the replacement string takes a log-format
and supports back-references.
Using the last rate counters, we now compute the queue, connect, response
and total times per server and per backend with a 95% accuracy over the last
1024 samples. The operation is cheap so we don't need to condition it.
While the current functions report average event counts per period, we are
also interested in average values per event. For this we use a different
method. The principle is to rely on a long tail which sums the new value
with a fraction of the previous value, resulting in a sliding window of
infinite length depending on the precision we're interested in.
The idea is that we always keep (N-1)/N of the sum and add the new sampled
value. The sum over N values can be computed with a simple program for a
constant value 1 at each iteration :
N
,---
\ N - 1 e - 1
> ( --------- )^x ~= N * -----
/ N e
'---
x = 1
Note: I'm not sure how to demonstrate this but at least this is easily
verified with a simple program, the sum equals N * 0.632120 for any N
moderately large (tens to hundreds).
Inserting a constant sample value V here simply results in :
sum = V * N * (e - 1) / e
But we don't want to integrate over a small period, but infinitely. Let's
cut the infinity in P periods of N values. Each period M is exactly the same
as period M-1 with a factor of ((N-1)/N)^N applied. A test shows that given a
large N :
N - 1 1
( ------- )^N ~= ---
N e
Our sum is now a sum of each factor times :
N*P P
,--- ,---
\ N - 1 e - 1 \ 1
> v ( --------- )^x ~= VN * ----- * > ---
/ N e / e^x
'--- '---
x = 1 x = 0
For P "large enough", in tests we get this :
P
,---
\ 1 e
> --- ~= -----
/ e^x e - 1
'---
x = 0
This simplifies the sum above :
N*P
,---
\ N - 1
> v ( --------- )^x = VN
/ N
'---
x = 1
So basically by summing values and applying the last result an (N-1)/N factor
we just get N times the values over the long term, so we can recover the
constant value V by dividing by N.
A value added at the entry of the sliding window of N values will thus be
reduced to 1/e or 36.7% after N terms have been added. After a second batch,
it will only be 1/e^2, or 13.5%, and so on. So practically speaking, each
old period of N values represents only a quickly fading ratio of the global
sum :
period ratio
1 36.7%
2 13.5%
3 4.98%
4 1.83%
5 0.67%
6 0.25%
7 0.09%
8 0.033%
9 0.012%
10 0.0045%
So after 10N samples, the initial value has already faded out by a factor of
22026, which is quite fast. If the sliding window is 1024 samples wide, it
means that a sample will only count for 1/22k of its initial value after 10k
samples went after it, which results in half of the value it would represent
using an arithmetic mean. The benefit of this method is that it's very cheap
in terms of computations when N is a power of two. This is very well suited
to record response times as large values will fade out faster than with an
arithmetic mean and will depend on sample count and not time.
Demonstrating all the above assumptions with maths instead of a program is
left as an exercise for the reader.
qstr() and cstr() will be used to quote-encode strings. The first one
does it unconditionally. The second one is aimed at CSV files where the
quote-encoding is only needed when the field contains a quote or a comma.
This helper is similar to addr_to_str but
tries to convert the port rather than the address
of a struct sockaddr_storage.
This is in preparation for supporting
an external agent check.
Signed-off-by: Simon Horman <horms@verge.net.au>
This is in order to simplify the PPv2 header parsing code to look more
like the one provided as an example in the spec. No code change was
performed beyond just merging the proxy_addr union into the proxy_hdr_v2
struct.
This patch adds support for captures with no header name. The purpose
is to allow extra captures to be defined and logged along with the
header captures.
When no static DH parameters are specified, this patch makes haproxy
use standardized (rfc 2409 / rfc 3526) DH parameters with prime lenghts
of 1024, 2048, 4096 or 8192 bits for DHE key exchange. The size of the
temporary/ephemeral DH key is computed as the minimum of the RSA/DSA server
key size and the value of a new option named tune.ssl.default-dh-param.
Dmitry Sivachenko reported that "uint" doesn't build on FreeBSD 10.
On Linux it's defined in sys/types.h and indicated as "old". Just
get rid of the very few occurrences.
One important aspect of SSL performance tuning is the cache size,
but there's no metric to know whether it's large enough or not. This
commit introduces two counters, one for the cache lookups and another
one for cache misses. These counters are reported on "show info" on
the stats socket. This way, it suffices to see the cache misses
counter constantly grow to know that a larger cache could possibly
help.
It's commonly needed to know how many SSL asymmetric keys are computed
per second on either side (frontend or backend), and to know the SSL
session reuse ratio. Now we compute these values and report them in
"show info".
Currently exp_replace() (which is used in reqrep/reqirep) is
vulnerable to a buffer overrun. I have been able to reproduce it using
the attached configuration file and issuing the following command:
wget -O - -S -q http://localhost:8000/`perl -e 'print "a"x4000'`/cookie.php
Str was being checked only in in while (str) and it was possible to
read past that when more than one character was being accessed in the
loop.
WT:
Note that this bug is only marked MEDIUM because configurations
capable of triggering this bug are very unlikely to exist at all due
to the fact that most rewrites consist in static string additions
that largely fit into the reserved area (8kB by default).
This fix should also be backported to 1.4 and possibly even 1.3 since
it seems to have been present since 1.1 or so.
Config:
-------
global
maxconn 500
stats socket /tmp/haproxy.sock mode 600
defaults
timeout client 1000
timeout connect 5000
timeout server 5000
retries 1
option redispatch
listen stats
bind :8080
mode http
stats enable
stats uri /stats
stats show-legends
listen tcp_1
bind :8000
mode http
maxconn 400
balance roundrobin
reqrep ^([^\ :]*)\ /(.*)/(.*)\.php(.*) \1\ /\3.php?arg=\2\2\2\2\2\2\2\2\2\2\2\2\2\4
server srv1 127.0.0.1:9000 check port 9000 inter 1000 fall 1
server srv2 127.0.0.1:9001 check port 9001 inter 1000 fall 1
Agent will have the ability to return a weight without indicating an
up/down status. Currently this is not possible, so let's add a 5th
result CHK_RES_NEUTRAL for this purpose. It has been mapped to the
unused HCHK_STATUS_CHECKED which already serves as a neutral delimitor
between initiated checks and those returning a result.
Instead of enabling/disabling maintenance mode and drain mode separately
using 4 actions, we now offer 3 simplified actions :
- set state to READY
- set state to DRAIN
- set state to MAINT
They have the benefit of reporting the same state as displayed on the page,
and of doing the double-switch atomically eg when switching from drain to
maint.
Note that the old actions are still supported for users running scripts.
This patch adds support for a new "drain" mode. So now we have 3 admin
modes for a server :
- READY
- DRAIN
- MAINT
The drain mode disables load balancing but leaves the server up. It can
coexist with maint, except that maint has precedence. It is also inherited
from tracked servers, so just like maint, it's represented with 2 bits.
New functions were designed to set/clear each flag and to propagate the
changes to tracking servers when relevant, and to log the changes. Existing
functions srv_set_adm_maint() and srv_set_adm_ready() were replaced to make
use of the new functions.
Currently the drain mode is not yet used, however the whole logic was tested
with all combinations of set/clear of both flags in various orders to catch
all corner cases.
This function was taken from check_set_server_drain(). It does not
consider health checks at all and only sets a server to stopping
provided it's not in maintenance and is not currently stopped. The
resulting state will be STOPPING. The state change is propagated
to tracked servers.
For now the function is not used, but the goal is to split health
checks status from server status and to be able to change a server's
state regardless of health checks statuses.
This function was taken from check_set_server_up(). It does not consider
health checks at all and only sets a server up provided it's not in
maintenance. The resulting state may be either RUNNING or STARTING
depending on the presence of a slowstart or not. The state change is
propagated to tracked servers.
For now the function is not used, but the goal is to split health
checks status from server status and to be able to change a server's
state regardless of health checks statuses.
This function was extracted from check_set_server_down(). In only
manipulates the server state and does not consider the health checks
at all, nor does it modify their status. It takes a reason message to
report in logs, however it passes NULL when recursing through the
trackers chain.
For now the function is not used, but the goal is to split health
checks status from server status and to be able to change a server's
state regardless of health checks statuses.
srv_adm_append_status() was renamed srv_append_status() since it's no
more dedicated to maintenance mode. It now supports a reason which if
not null is appended to the output string.
We don't have to handle the maintenance transition here anymore so we
can simplify the functions and conditions. This also means that we don't
need the disable/enable functions but only a function to switch to each
new state.
It's worth mentionning that at this stage there are still confusions
between the server state and the checks states. For example, the health
check's state is adjusted from tracked servers changing state, while it
should not be.
This change now involves a new flag SRV_ADMF_IMAINT to note that the
maintenance status of a server is inherited from another server. Thus,
we know at each server level in the chain if it's running, in forced
maintenance or in a maintenance status because it tracks another server,
or even in both states.
Disabling a server propagates this flag down to other servers. Enabling
a server flushes the flag down. A server becomes up again once both of
its flags are cleared.
Two new functions "srv_adm_set_maint()" and "srv_adm_set_ready()" are used to
manipulate this maintenance status. They're used by the CLI and the stats
page.
Now the stats page always says "MAINT" instead of "MAINT(via)" and it's
only the chk/down field which reports "via x/y" when the status is
inherited from another server, but it doesn't say it when a server was
forced into maintenance. The CSV output indicates "MAINT (via x/y)"
instead of only "MAINT(via)". This is the most accurate representation.
One important thing is that now entering/leaving maintenance for a
tracking server correctly follows the state of the tracked server.
Checks.c has become a total mess. A number of proxy or server maintenance
and queue management functions were put there probably because they were
used there, but that makes the code untouchable. And that's without saying
that their names does not always relate to what they really do!
So let's do a first pass by moving these ones :
- set_backend_down() => backend.c
- redistribute_pending() => queue.c:pendconn_redistribute()
- check_for_pending() => queue.c:pendconn_grab_from_px()
- shutdown_sessions => server.c:srv_shutdown_sessions()
- shutdown_backup_sessions => server.c:srv_shutdown_backup_sessions()
All of them were moved at once.
Servers used to have 3 flags to store a state, now they have 4 states
instead. This avoids lots of confusion for the 4 remaining undefined
states.
The encoding from the previous to the new states can be represented
this way :
SRV_STF_RUNNING
| SRV_STF_GOINGDOWN
| | SRV_STF_WARMINGUP
| | |
0 x x SRV_ST_STOPPED
1 0 0 SRV_ST_RUNNING
1 0 1 SRV_ST_STARTING
1 1 x SRV_ST_STOPPING
Note that the case where all bits were set used to exist and was randomly
dealt with. For example, the task was not stopped, the throttle value was
still updated and reported in the stats and in the http_server_state header.
It was the same if the server was stopped by the agent or for maintenance.
It's worth noting that the internal function names are still quite confusing.
Now we introduce srv->admin and srv->prev_admin which are bitfields
containing one bit per source of administrative status (maintenance only
for now). For the sake of backwards compatibility we implement a single
source (ADMF_FMAINT) but the code already checks any source (ADMF_MAINT)
where the STF_MAINTAIN bit was previously checked. This will later allow
us to add ADMF_IMAINT for maintenance mode inherited from tracked servers.
Along doing these changes, it appeared that some places will need to be
revisited when implementing the inherited bit, this concerns all those
modifying the ADMF_FMAINT bit (enable/disable actions on the CLI or stats
page), and the checks to report "via" on the stats page. But currently
the code is harmless.
Till now, the server's state and flags were all saved as a single bit
field. It causes some difficulties because we'd like to have an enum
for the state and separate flags.
This commit starts by splitting them in two distinct fields. The first
one is srv->state (with its counter-part srv->prev_state) which are now
enums, but which still contain bits (SRV_STF_*).
The flags now lie in their own field (srv->flags).
The function srv_is_usable() was updated to use the enum as input, since
it already used to deal only with the state.
Note that currently, the maintenance mode is still in the state for
simplicity, but it must move as well.
When run in daemon mode (i.e. with at least one forked process) and using
the epoll poller, sending USR1 (graceful shutdown) to the worker processes
can cause some workers to start running at 100% CPU. Precondition is having
an established HTTP keep-alive connection when the signal is received.
The cloned (during fork) listening sockets do not get closed in the parent
process, thus they do not get removed from the epoll set automatically
(see man 7 epoll). This can lead to the process receiving epoll events
that it doesn't feel responsible for, resulting in an endless loop around
epoll_wait() delivering these events.
The solution is to explicitly remove these file descriptors from the epoll
set. To not degrade performance, care was taken to only do this when
neccessary, i.e. when the file descriptor was cloned during fork.
Signed-off-by: Conrad Hoffmann <conrad@soundcloud.com>
[wt: a backport to 1.4 could be studied though chances to catch the bug are low]
We used to call srv_is_usable() with either the current state and weights
or the previous ones. This causes trouble for future changes, so let's first
split it in two variants :
- srv_is_usable(srv) considers the current status
- srv_was_usable(srv) considers the previous status
Detecting that a server's status has changed is a bit messy, as well
as it is to commit the status changes. We'll have to add new conditions
soon and we'd better avoid to multiply the number of touched locations
with the high risk of forgetting them.
This commit introduces :
- srv_lb_status_changed() to report if the status changed from the
previously committed one ;
- svr_lb_commit_status() to commit the current status
The function is now used by all load-balancing algorithms.
This flag is only a copy of (srv->uweight == 0), so better get rid of
it to reduce some of the confusion that remains in the code, and use
a simple function to return this state based on this weight instead.
Long-lived sessions are often subject to half-closed sessions resulting in
a lot of sessions appearing in FIN_WAIT state in the system tables, and no
way for haproxy to get rid of them. This typically happens because clients
suddenly disconnect without sending any packet (eg: FIN or RST was lost in
the path), and while the server detects this using an applicative heart
beat, haproxy does not close the connection.
This patch adds two new timeouts : "timeout client-fin" and
"timeout server-fin". The former allows one to override the client-facing
timeout when a FIN has been received or sent. The latter does the same for
server-facing connections, which is less useful.
git.1wt.eu is painfully slow and some people experience issues with
it. Better hide it and only advertise git.haproxy.org which is mirrored
on a faster server.
Also replace haproxy.1wt.eu with www.haproxy.org in the download URL
which appears in the stats page.
Being able to map prefixes to values is already used for IPv4/IPv6
but was not yet used with strings. It can be very convenient to map
directories to server farms but large lists may be slow.
By using ebmb_insert_prefix() and ebmb_lookup_longest(), we can
insert strings with their own length as a prefix, and lookup
candidate strings and ensure that the longest matching one will
be returned, which is the longest string matching the entry.
The is_addr() function indicates if an address is set and is an IPv4
or IPv6 address. Let's rename it is_inet_addr() and make is_addr()
also accept AF_UNIX addresses.
Some consistency checks cannot be performed between frontends, backends
and peers at the moment because there is no way to check for intersection
between processes bound to some processes when the number of processes is
higher than the number of bits in a word.
So first, let's limit the number of processes to the machine's word size.
This means nbproc will be limited to 32 on 32-bit machines and 64 on 64-bit
machines. This is far more than enough considering that configs rarely go
above 16 processes due to scalability and management issues, so 32 or 64
should be fine.
This way we'll ensure we can always build a mask of all the processes a
section is bound to.
This commit modifies the PROXY protocol V2 specification to support headers
longer than 255 bytes allowing for optional extensions. It implements the
PROXY protocol V2 which is a binary representation of V1. This will make
parsing more efficient for clients who will know in advance exactly how
many bytes to read. Also, it defines and implements some optional PROXY
protocol V2 extensions to send information about downstream SSL/TLS
connections. Support for PROXY protocol V1 remains unchanged.
Process shared mutex seems not supported on some OSs (FreeBSD).
This patch checks errors on mutex lock init to fallback
on a private session cache (per process cache) in error cases.
Trying to build with an old gcc and glibc revealed that we must not
state "inline" in our _syscall* definitions since it's already present
in the declaration making use of the _syscall* macros.
On the mailing list, seri0528@naver.com reported an issue when
using balance url_param or balance uri. The request would sometimes
stall forever.
Cyril Bont managed to reproduce it with the configuration below :
listen test :80
mode http
balance url_param q
hash-type consistent
server s demo.1wt.eu:80
and found it appeared with this commit : 80a92c0 ("BUG/MEDIUM: http:
don't start to forward request data before the connect").
The bug is subtle but real. The problem is that the HTTP request
forwarding analyzer refrains from starting to parse the request
body when some LB algorithms might need the body contents, in order
to preserve the data pointer and avoid moving things around during
analysis in case a redispatch is later needed. And in order to detect
that the connection establishes, it watches the response channel's
CF_READ_ATTACHED flag.
The problem is that a request analyzer is not subscribed to a response
channel, so it will only see changes when woken for other (generally
correlated) reasons, such as the fact that part of the request could
be sent. And since the CF_READ_ATTACHED flag is cleared once leaving
process_session(), it is important not to miss it. It simply happens
that sometimes the server starts to respond in a sequence that validates
the connection in the middle of process_session(), that it is detected
after the analysers, and that the newly assigned CF_READ_ATTACHED is
not used to detect that the request analysers need to be called again,
then the flag is lost.
The CF_WAKE_WRITE flag doesn't work either because it's cleared upon
entry into process_session(), ie if we spend more than one call not
connecting.
Thus we need a new flag to tell the connection initiator that we are
specifically interested in being notified about connection establishment.
This new flag is CF_WAKE_CONNECT. It is set by the requester, and is
cleared once the connection succeeds, where CF_WAKE_ONCE is set instead,
causing the request analysers to be scanned again.
For future versions, some better options will have to be considered :
- let all analysers subscribe to both request and response events ;
- let analysers subscribe to stream interface events (reduces number
of useless calls)
- change CF_WAKE_WRITE's semantics to persist across calls to
process_session(), but that is different from validating a
connection establishment (eg: no data sent, or no data to send)
The bug was introduced in 1.5-dev23, no backport is needed.
Till now we used to return a pointer to a rule, but that makes it
complicated to later add support for registering new actions which
may fail. For example, the redirect may fail if the response is too
large to fit into the buffer.
So instead let's return a verdict. But we needed the pointer to the
last rule to get the address of a redirect and to get the realm used
by the auth page. So these pieces of code have moved into the function
and they produce a verdict.
Last fix did address the issue for inlined patterns, but it was not
enough because the flags are lost as well when updating patterns
dynamically over the CLI.
Also if the same file was used once with -i and another time without
-i, their references would have been merged and both would have used
the same matching method.
It's appear that the patterns have two types of flags. The first
ones are relative to the pattern matching, and the second are
relative to the pattern storage. The pattern matching flags are
the same for all the patterns of one expression. Now they are
stored in the expression. The storage flags are information
returned by the pattern mathing function. This information is
relative to each entry and is stored in the "struct pattern".
Now, the expression matching flags are forwarded to the parse
and index functions. These flags are stored during the
configuration parsing, and they are used during the parse and
index actions.
This issue was introduced in dev23 with the major pattern rework,
and is a continuation of commit a631fc8 ("BUG/MAJOR: patterns: -i
and -n are ignored for inlined patterns"). No backport is needed.
These flags are only passed to pattern_read_from_file() which
loads the patterns from a file. The functions used to parse the
patterns from the current line do not provide the means to pass
the pattern flags so they're lost.
This issue was introduced in dev23 with the major pattern rework,
and was reported by Graham Morley. No backport is needed.
Using the previous callback, it's trivial to block the heartbeat attack,
first we control the message length, then we emit an SSL error if it is
out of bounds. A special log is emitted, indicating that a heartbleed
attack was stopped so that they are not confused with other failures.
That way, haproxy can protect itself even when running on an unpatched
SSL stack. Tests performed with openssl-1.0.1c indicate a total success.
Users have seen a huge increase in the rate of SSL handshake failures
starting from 2014/04/08 with the release of the Heartbleed OpenSSL
vulnerability (CVE-2014-0160). Haproxy can detect that a heartbeat
was received in the incoming handshake, and such heartbeats are not
supposed to be common, so let's log a different message when a
handshake error happens after a heartbeat is detected.
This patch only adds the new message and the new code.
The http_(res|req)_keywords_register() functions allow to register
new keywords.
You need to declare a keyword list:
struct http_req_action_kw_list test_kws = {
.scope = "testscope",
.kw = {
{ "test", parse_test },
{ NULL, NULL },
}
};
and a parsing function:
int parse_test(const char **args, int *cur_arg, struct proxy *px, struct http_req_rule *rule, char **err)
{
rule->action = HTTP_REQ_ACT_CUSTOM_STOP;
rule->action_ptr = action_function;
return 0;
}
http_req_keywords_register(&test_kws);
The HTTP_REQ_ACT_CUSTOM_STOP action stops evaluation of rules after
your rule, HTTP_REQ_ACT_CUSTOM_CONT permits the evaluation of rules
after your rule.
This patch allows manipulation of ACL and MAP content thanks to any
information available in a session: source IP address, HTTP request or
response header, etc...
It's an update "on the fly" of the content of the map/acls. This means
it does not resist to reload or restart of HAProxy.
Finn Arne Gangstad suggested that we should have the ability to break
keep-alive when the target server has reached its maxconn and that a
number of connections are present in the queue. After some discussion
around his proposed patch, the following solution was suggested : have
a per-proxy setting to fix a limit to the number of queued connections
on a server after which we break keep-alive. This ensures that even in
high latency networks where keep-alive is beneficial, we try to find a
different server.
This patch is partially based on his original proposal and implements
this configurable threshold.
All the code inherited from version 1.1 still holds a lot ot sessions
called "t" because in 1.1 they were tasks. This naming is very annoying
and sometimes even confusing, for example in code involving tables.
Let's get rid of this once for all and before 1.5-final.
Nothing changed beyond just carefully renaming these variables.
This basically reimplements commit f3221f9 ("MEDIUM: stats: add support
for HTTP keep-alive on the stats page") which was reverted by commit
51437d2 after Igor Chan reported a broken stats page caused by the bug
fix by previous commit.
In order to avoid abusively relying on buf->o to guess how many bytes to
rewind during a redispatch, we now clear msg->sov. Thus the meaning of this
field is exactly "how many bytes of headers are left to be forwarded". It
is still possible to rewind because msg->eoh + msg->eol equal that value
before scheduling the forwarding, so we can always subtract them.
http_body_rewind() returns the number of bytes to rewind before buf->p to
find the message's body. It relies on http_hdr_rewind() to find the beginning
and adds msg->eoh + msg->eol which are always safe.
http_data_rewind() does the same to get the beginning of the data, which
differs from above when a chunk is present. It uses the function above and
adds msg->sol.
The purpose is to centralize further ->sov changes aiming at avoiding
to rely on buf->o.
http_uri_rewind() returns the number of bytes to rewind before buf->p to
find the URI. It relies on http_hdr_rewind() to find the beginning and
is just here to simplify operations.
The purpose is to centralize further ->sov changes aiming at avoiding
to rely on buf->o.
http_hdr_rewind() returns the number of bytes to rewind before buf->p to
find the beginning of headers. At the moment it's not exact as it still
relies on buf->o, assuming that no other data from a past message were
pending there, but it's what was done till there.
The purpose is to centralize further ->sov changes aiming at avoiding
to rely on buf->o.
http_body_bytes() returns the number of bytes of the current message body
present in the buffer. It is compatible with being called before and after
the headers are forwarded.
This is done to centralize further ->sov changes.
There are still some pending issues in the gzip compressor, and fixing
them requires a better handling of intermediate parsing states.
Another issue to deal with is the rewinding of a buffer during a redispatch
when a load balancing algorithm involves L7 data because the exact amount of
data to rewind is not clear. At the moment, this is handled by unwinding all
pending data, which cannot work in responses due to pipelining.
Last, having a first analysis which parses the body and another one which
restarts from where the parsing was left is wrong. Right now it only works
because we never both parse and transform in the same direction. But that
is wrong anyway.
In order to address the first issue, we'll have to use msg->eoh + msg->eol
to find the end of headers, and we still need to store the information about
the forwarded header length somewhere (msg->sol might be reused for this).
msg->sov may only be used for the start of data and not for subsequent chunks
if possible. This first implies that we stop sharing it with header length,
and stop using msg->sol there. In fact we don't need it already as it is
always zero when reaching the HTTP_MSG_BODY state. It was only updated to
reflect a copy of msg->sov.
So now as a first step into that direction, this patch ensure that msg->sol
is never re-assigned after being set to zero and is not used anymore when
we're dealing with HTTP processing and forwarding. We'll later reuse it
differently but for now it's secured.
The patch does nothing magic, it only removes msg->sol everywhere it was
already zero and avoids setting it. In order to keep the sov-sol difference,
it now resets sov after forwarding data. In theory there's no problem here,
but the patch is still tagged major because that code is complex.
