Define a new set of CLI commands publish/unpublish backend <be>. The
objective is to be able to change the status of a backend to
unpublished. Such a backend is considered ineligible to traffic : this
allows to skip use_backend rules which target it.
Note that contrary to disabled/stopped proxies, an unpublished backend
still has server checks running on it.
Internally, a new proxy flags PR_FL_BE_UNPUBLISHED is defined. CLI
commands handler "publish backend" and "unpublish backend" are executed
under thread isolation. This guarantees that the flag can safely be set
or remove in the CLI handlers, and read during content-switching
processing.
A proxy can be marked as disabled using the keyword with the same name.
The doc mentions that it won't process any traffic. However, this is not
really the case for backends as they may still be selected via switching
rules during stream processing.
In fact, currently access to disabled backends will be conducted up to
assign_server(). However, no eligible server is found at this stage,
resulting in a connection closure or an HTTP 503, which is expected. So
in the end, servers in disabled backends won't receive any traffic. But
this is only because post-parsing steps are not performed on such
backends. Thus, this can be considered as functional but only via
side-effects.
This patch clarifies the handling of disable backends, so that they are
never selected via switching rules. Now, process_switching_rules() will
ignore disable backends and continue rules evaluation.
As this is a behavior change, this patch is labelled as medium. The
documentation manuel for use_backend is updated accordingly.
Released version 3.4-dev2 with the following main changes :
- BUG/MEDIUM: mworker/listener: ambiguous use of RX_F_INHERITED with shards
- BUG/MEDIUM: http-ana: Properly detect client abort when forwarding response (v2)
- BUG/MEDIUM: stconn: Don't report abort from SC if read0 was already received
- BUG/MEDIUM: quic: Don't try to use hystart if not implemented
- CLEANUP: backend: Remove useless test on server's xprt
- CLEANUP: tcpcheck: Remove useless test on the xprt used for healthchecks
- CLEANUP: ssl-sock: Remove useless tests on connection when resuming TLS session
- REGTESTS: quic: fix a TLS stack usage
- REGTESTS: list all skipped tests including 'feature cmd' ones
- CI: github: remove openssl no-deprecated job
- CI: github: add a job to test the master branch of OpenSSL
- CI: github: openssl-master.yml misses actions/checkout
- BUG/MEDIUM: backend: Do not remove CO_FL_SESS_IDLE in assign_server()
- CI: github: use git prefix for openssl-master.yml
- BUG/MEDIUM: mux-h2: synchronize all conditions to create a new backend stream
- REGTESTS: fix error when no test are skipped
- MINOR: cpu-topo: Turn the cpu policy configuration into a struct
- MEDIUM: cpu-topo: Add a "threads-per-core" keyword to cpu-policy
- MEDIUM: cpu-topo: Add a "cpu-affinity" option
- MEDIUM: cpu-topo: Add a new "max-threads-per-group" global keyword
- MEDIUM: cpu-topo: Add the "per-thread" cpu_affinity
- MEDIUM: cpu-topo: Add the "per-ccx" cpu_affinity
- BUG/MINOR: cpu-topo: fix -Wlogical-not-parentheses build with clang
- DOC: config: fix number of values for "cpu-affinity"
- MINOR: tools: add a secure implementation of memset
- MINOR: mux-h2: add missing glitch count for non-decodable H2 headers
- MINOR: mux-h2: perform a graceful close at 75% glitches threshold
- MEDIUM: mux-h1: implement basic glitches support
- MINOR: mux-h1: perform a graceful close at 75% glitches threshold
- MEDIUM: cfgparse: acknowledge that proxy ID auto numbering starts at 2
- MINOR: cfgparse: remove useless checks on no server in backend
- OPTIM/MINOR: proxy: do not init proxy management task if unused
- MINOR: patterns: preliminary changes for reorganization
- MEDIUM: patterns: reorganize pattern reference elements
- CLEANUP: patterns: remove dead code
- OPTIM: patterns: cache the current generation
- MINOR: tcp: add new bind option "tcp-ss" to instruct the kernel to save the SYN
- MINOR: protocol: support a generic way to call getsockopt() on a connection
- MINOR: tcp: implement the get_opt() function
- MINOR: tcp_sample: implement the fc_saved_syn sample fetch function
- CLEANUP: assorted typo fixes in the code, commits and doc
- BUG/MEDIUM: cpu-topo: Don't forget to reset visited_ccx.
- BUG/MAJOR: set the correct generation ID in pat_ref_append().
- BUG/MINOR: backend: fix the conn_retries check for TFO
- BUG/MINOR: backend: inspect request not response buffer to check for TFO
- MINOR: net_helper: add sample converters to decode ethernet frames
- MINOR: net_helper: add sample converters to decode IP packet headers
- MINOR: net_helper: add sample converters to decode TCP headers
- MINOR: net_helper: add ip.fp() to build a simplified fingerprint of a SYN
- MINOR: net_helper: prepare the ip.fp() converter to support more options
- MINOR: net_helper: add an option to ip.fp() to append the TTL to the fingerprint
- MINOR: net_helper: add an option to ip.fp() to append the source address
- DOC: config: fix the length attribute name for stick tables of type binary / string
- MINOR: mworker/cli: only keep positive PIDs in proc_list
- CLEANUP: mworker: remove duplicate list.h include
- BUG/MINOR: mworker/cli: fix show proc pagination using reload counter
- MINOR: mworker/cli: extract worker "show proc" row printer
- MINOR: cpu-topo: Factorize code
- MINOR: cpu-topo: Rename variables to better fit their usage
- BUG/MEDIUM: peers: Properly handle shutdown when trying to get a line
- BUG/MEDIUM: mux-h1: Take care to update <kop> value during zero-copy forwarding
- MINOR: threads: Avoid using a thread group mask when stopping.
- MINOR: hlua: Add support for lua 5.5
- MEDIUM: cpu-topo: Add an optional directive for per-group affinity
- BUG/MEDIUM: mworker: can't use signals after a failed reload
- BUG/MEDIUM: stconn: Move data from <kip> to <kop> during zero-copy forwarding
- DOC: config: fix a few typos and refine cpu-affinity
- MINOR: receiver: Remove tgroup_mask from struct shard_info
- BUG/MINOR: quic: fix deprecated warning for window size keyword
There were two typos in the recently updated parts about per-group.
Also, change the commas to ':' after the options values, as sometimes
it would be confusing. Last, place quotes around keyword names so that
they're explicitly referred to as language keywords. No backport is
needed.
When using per-group affinity, add an optional new directive. It accepts
the values of "auto", where when multiple thread groups are created, the
available CPUs are split equally across the groups, and is the new
default, and "loose", where all groups are bound to all available CPUs,
this is the old default.
The stick-table doc was reworked and moved in 3.2 with commit da67a89f3
("DOC: config: move stick-tables and peers to their own section"), however
the optional length attribute for binary/string types was mistakenly
spelled "length" while it's "len".
This must be backported to 3.2.
It can make sense to support extra components in the fingerprint to ease
configuration, so let's change the 0/1 value to a bit field. We also turn
the current 1 (TCP options list) to 2 so that we'll reuse 1 for the TTL.
Here we collect all the stuff that depends on the sender's settings,
such as TOS, IP version, TTL range, presence of DF bit or IP options,
presence of DATA in the SYN, CWR+ECE flags, TCP header length, wscale,
initial window, mss, as well as the list of TCP extension kinds. It's
obviously fairly limited but can allows to avoid blacklisting certain
valid clients sharing the same IP address as a misbehaving one.
It supports both a short and a long mode depending on the argument.
These can be used with the tcp-ss bind option. The doc was updated
accordingly.
This adds the following converters, used to decode fields
in an incoming tcp header:
tcp.dst, tcp.flags, tcp.seq, tcp.src, tcp.win,
tcp.options.mss, tcp.options.tsopt, tcp.options.tsval,
tcp.options.wscale, tcp.options_list,
These can be used with the tcp-ss bind option. The doc was updated
accordingly.
This adds a few converters that help decode parts of IP packets:
- ip.data : returns the next header (typically TCP)
- ip.df : returns the dont-fragment flags
- ip.dst : returns the destination IPv4/v6 address
- ip.hdr : returns only the IP header
- ip.proto: returns the upper level protocol (udp/tcp)
- ip.src : returns the source IPv4/v6 address
- ip.tos : returns the TOS / TC field
- ip.ttl : returns the TTL/HL value
- ip.ver : returns the IP version (4 or 6)
These can be used with the tcp-ss bind option. The doc was updated
accordingly.
This adds a few converters that help decode parts of ethernet frame
headers:
- eth.data : returns the next header (typically IP)
- eth.dst : returns the destination MAC address
- eth.hdr : returns only the ethernet header
- eth.proto: returns the ethernet proto
- eth.src : returns the source MAC address
- eth.vlan : returns the VLAN ID when present
These can be used with the tcp-ss bind option. The doc was updated
accordingly.
This function retrieves the copy of a SYN packet that the system has
kept for us when bind option "tcp-ss" was set to 1 or above. It's
recommended to copy it to a local variable because it will be freed
after being read. It allows to inspect all parts of an incoming SYN
packet, provided that it was preserved (e.g. not possible with SYN
cookies). The doc provides examples of how to use it.
This option enables TCP_SAVE_SYN on the listening socket, which will
cause the kernel to try to save a copy of the SYN packet header (L2,
IP and TCP are supported). This can permit to check the source MAC
address of a client, or find certain TCP options such as a source
address encapsulated using RFC7974. It could also be used as an
alternate approach to retrieving the source and destination addresses
and ports. For now setting the option is enabled, but sample fetch
functions and converters will be needed to extract info.
Each frontend/backend/listen proxies is assigned an unique ID. It can
either be set explicitely via 'id' keyword, or automatically assigned on
post parsing depending on the available values.
It was expected that the first automatically assigned value would start
at '1'. However, due to a legacy bug this is not the case as this value
is always skipped. Thus, automatically assigned proxies always start at
'2' or more.
To avoid breaking the current existing state, this situation is now
acknowledged with the current patch. The code is rewritten with an
explicit warning to ensure that this won't be fixed without knowing the
current status. A new regtest also ensures this.
We now count glitches for each parsing error, including those that
have been accepted via accept-unsafe-violations-*. Front and back
are considered and the connection gets killed on error once if the
threshold is reached or passed and the CPU usage is beyond the
configured limit (0 by default). This was tested with:
curl -ivH "host : blah" 0:4445{,,,,,,,,,}
which sends 10 requests to a configuration having a threshold of 5.
The global keywords are named similarly to H2 and quic:
tune.h1.be.glitches-threshold xxxx
tune.h1.fe.glitches-threshold xxxx
The glitches count of each connection is also reported when non-null
in the connection dumps (e.g. "show fd").
This avoids hitting the hard wall for connections with non-compliant
peers that would be accumulating errors over long connections. We now
permit to recycle the connection early enough to reset the connection
counter.
This was tested artificially by adding this to h2c_frt_handle_headers():
h2c_report_glitch(h2c, 1, "new stream");
or this to h2_detach():
h2c_report_glitch(h2c, 1, "detaching");
and injecting using h2load -c 1 -n 1000 0:4445 on a config featuring
tune.h2.fe.glitches-threshold 1000:
finished in 8.74ms, 85802.54 req/s, 686.62MB/s
requests: 1000 total, 751 started, 751 done, 750 succeeded, 250 failed, 250 errored, 0 timeout
status codes: 750 2xx, 0 3xx, 0 4xx, 0 5xx
traffic: 6.00MB (6293303) total, 132.57KB (135750) headers (space savings 29.84%), 5.86MB (6144000) data
min max mean sd +/- sd
time for request: 9us 178us 10us 6us 99.47%
time for connect: 139us 139us 139us 0us 100.00%
time to 1st byte: 339us 339us 339us 0us 100.00%
req/s : 87477.70 87477.70 87477.70 0.00 100.00%
The failures are due to h2load not supporting reconnection.
Add a new cpu-affinity keyword, "per-thread".
If used, each thread will be bound to only one hardware thread of the
thread group.
If used in conjonction with the "threads-per-core 1" cpu_policy, then
each thread will be bound on a different core.
Add a new global keyword, max-threads-per-group. It sets the maximum number of
threads a thread group can contain. Unless the number of thread groups
is fixed with "thread-groups", haproxy will just create more thread
groups as needed.
The default and maximum value is 64.
Add a new global option, "cpu-affinity", which controls how threads are
bound.
It currently accepts three values, "per-core", which will bind one thread to
each hardware thread of a given core, and "per-group" which will use all
the available hardware threads of the thread group, and "auto", the
default, which will use "per-group", unless "threads-per-core 1" has
been specified in cpu_policy, in which case it will use per-core.
Add a new, optional key-word to "cpu-policy", "threads-per-core".
It takes one argument, "1" or "auto". If "1" is used, then only one
thread per core will be created, no matter how many hardware thread each
core has. If "auto" is used, then one thread will be created per
hardware thread, as is the case by default.
for example: cpu-policy performance threads-per-core 1
Released version 3.4-dev1 with the following main changes :
- BUG/MINOR: jwt: Missing "case" in switch statement
- DOC: configuration: ECH support details
- Revert "MINOR: quic: use dynamic cc_algo on bind_conf"
- MINOR: quic: define quic_cc_algo as const
- MINOR: quic: extract cc-algo parsing in a dedicated function
- MINOR: quic: implement cc-algo server keyword
- BUG/MINOR: quic-be: Missing keywords array NULL termination
- REGTESTS: ssl enable tls12_reuse.vtc for AWS-LC
- REGTESTS: ssl: split tls*_reuse in stateless and stateful resume tests
- BUG/MEDIUM: connection: fix "bc_settings_streams_limit" typo
- BUG/MEDIUM: config: ignore empty args in skipped blocks
- DOC: config: mention clearer that the cache's total-max-size is mandatory
- DOC: config: reorder the cache section's keywords
- BUG/MINOR: quic/ssl: crash in ClientHello callback ssl traces
- BUG/MINOR: quic-be: handshake errors without connection stream closure
- MINOR: quic: Add useful debugging traces in qc_idle_timer_do_rearm()
- REGTESTS: ssl: Move all the SSL certificates, keys, crt-lists inside "certs" directory
- REGTESTS: quic/ssl: ssl/del_ssl_crt-list.vtc supported by QUIC
- REGTESTS: quic: dynamic_server_ssl.vtc supported by QUIC
- REGTESTS: quic: issuers_chain_path.vtc supported by QUIC
- REGTESTS: quic: new_del_ssl_cafile.vtc supported by QUIC
- REGTESTS: quic: ocsp_auto_update.vtc supported by QUIC
- REGTESTS: quic: set_ssl_bug_2265.vtc supported by QUIC
- MINOR: quic: avoid code duplication in TLS alert callback
- BUG/MINOR: quic-be: missing connection stream closure upon TLS alert to send
- REGTESTS: quic: set_ssl_cafile.vtc supported by QUIC
- REGTESTS: quic: set_ssl_cert_noext.vtc supported by QUIC
- REGTESTS: quic: set_ssl_cert.vtc supported by QUIC
- REGTESTS: quic: set_ssl_crlfile.vtc supported by QUIC
- REGTESTS: quic: set_ssl_server_cert.vtc supported by QUIC
- REGTESTS: quic: show_ssl_ocspresponse.vtc supported by QUIC
- REGTESTS: quic: ssl_client_auth.vtc supported by QUIC
- REGTESTS: quic: ssl_client_samples.vtc supported by QUIC
- REGTESTS: quic: ssl_default_server.vtc supported by QUIC
- REGTESTS: quic: new_del_ssl_crlfile.vtc supported by QUIC
- REGTESTS: quic: ssl_frontend_samples.vtc supported by QUIC
- REGTESTS: quic: ssl_server_samples.vtc supported by QUIC
- REGTESTS: quic: ssl_simple_crt-list.vtc supported by QUIC
- REGTESTS: quic: ssl_sni_auto.vtc code provision for QUIC
- REGTESTS: quic: ssl_curve_name.vtc supported by QUIC
- REGTESTS: quic: add_ssl_crt-list.vtc supported by QUIC
- REGTESTS: add ssl_ciphersuites.vtc (TCP & QUIC)
- BUG/MINOR: quic: do not set first the default QUIC curves
- REGTESTS: quic/ssl: Add ssl_curves_selection.vtc
- BUG/MINOR: ssl: Don't allow to set NULL sni
- MEDIUM: quic: Add connection as argument when qc_new_conn() is called
- MINOR: ssl: Add a function to hash SNIs
- MINOR: ssl: Store hash of the SNI for cached TLS sessions
- MINOR: ssl: Compare hashes instead of SNIs when a session is cached
- MINOR: connection/ssl: Store the SNI hash value in the connection itself
- MEDIUM: tcpcheck/backend: Get the connection SNI before initializing SSL ctx
- BUG/MEDIUM: ssl: Don't reuse TLS session if the connection's SNI differs
- MEDIUM: ssl/server: No longer store the SNI of cached TLS sessions
- BUG/MINOR: log: Dump good %B and %U values in logs
- BUG/MEDIUM: http-ana: Don't close server connection on read0 in TUNNEL mode
- DOC: config: Fix description of the spop mode
- DOC: config: Improve spop mode documentation
- MINOR: ssl: Split ssl_crt-list_filters.vtc in two files by TLS version
- REGTESTS: quic: tls13_ssl_crt-list_filters.vtc supported by QUIC
- BUG/MEDIUM: h3: do not access QCS <sd> if not allocated
- CLEANUP: mworker/cli: remove useless variable
- BUG/MINOR: mworker/cli: 'show proc' is limited by buffer size
- BUG/MEDIUM: ssl: Always check the ALPN after handshake
- MINOR: connections: Add a new CO_FL_SSL_NO_CACHED_INFO flag
- BUG/MEDIUM: ssl: Don't store the ALPN for check connections
- BUG/MEDIUM: ssl: Don't resume session for check connections
- CLEANUP: improvements to the alignment macros
- CLEANUP: use the automatic alignment feature
- CLEANUP: more conversions and cleanups for alignment
- BUG/MEDIUM: h3: fix access to QCS <sd> definitely
- MINOR: h2/trace: emit a trace of the received RST_STREAM type
The spop mode description was a bit confusing. So let's improve it.
Thanks to @NickMRamirez.
This patch shoud fix issue #3206. It could be backported as far as 3.1.
It was mentionned that the spop mode turned the backend into a "log"
backend. It is obviously wrong. It turns the backend into a spop backend.
This patch should be backported as far as 3.1.
Probably due to historical accumulation, keywords were in a random
order that doesn't help when looking them up. Let's just reorder them
in alphabetical order like other sections. This can be backported.
Extend QUIC server configuration so that congestion algorithm and
maximum window size can be set on the server line. This can be achieved
using quic-cc-algo keyword with a syntax similar to a bind line.
This should be backported up to 3.3 as this feature is considered as
necessary for full QUIC backend support. Note that this relies on the
serie of previous commits which should be picked first.
Released version 3.3.0 with the following main changes :
- BUG/MINOR: acme: better challenge_ready processing
- BUG/MINOR: acme: warning ‘ctx’ may be used uninitialized
- MINOR: httpclient: complete the https log
- BUG/MEDIUM: server: do not use default SNI if manually set
- BUG/MINOR: freq_ctr: Prevent possible signed overflow in freq_ctr_overshoot_period
- DOC: ssl: Document the restrictions on 0RTT.
- DOC: ssl: Note that 0rtt works fork QUIC with QuicTLS too.
- BUG/MEDIUM: quic: do not prevent sending if no BE token
- BUG/MINOR: quic/server: free quic_retry_token on srv drop
- MINOR: quic: split global CID tree between FE and BE sides
- MINOR: quic: use separate global quic_conns FE/BE lists
- MINOR: quic: add "clo" filter on show quic
- MINOR: quic: dump backend connections on show quic
- MINOR: quic: mark backend conns on show quic
- BUG/MINOR: quic: fix uninit list on show quic handler
- BUG/MINOR: quic: release BE quic_conn on connect failure
- BUG/MINOR: server: fix srv_drop() crash on partially init srv
- BUG/MINOR: h3: do no crash on forwarding multiple chained response
- BUG/MINOR: h3: handle properly buf alloc failure on response forwarding
- BUG/MEDIUM: server/ssl: Unset the SNI for new server connections if none is set
- BUG/MINOR: acme: fix ha_alert() call
- Revert "BUG/MEDIUM: server/ssl: Unset the SNI for new server connections if none is set"
- BUG/MINOR: sock-inet: ignore conntrack for transparent sockets on Linux
- DEV: patchbot: prepare for new version 3.4-dev
- DOC: update INSTALL with the range of gcc compilers and openssl versions
- MINOR: version: mention that 3.3 is stable now
Add a new "be" filter to "show quic". Its purpose is to be able to
display backend connections. These connections can also be listed using
"all" filter.
Each quic_conn instance is stored in a global list. Its purpose is to be
able to loop over all known connections during "show quic".
Split this into two separate lists for frontend and backend usage.
Another change is that closing backend connections do not move into
quic_conns_clo list. They remain instead in their original list. The
objective of this patch is to reduce the contention between the two
sides.
Note that this prevents backend connections to be listed in "show quic"
now. This will be adjusted in a future patch.
Document that with QUIC, 0RTT only works with OpenSSL >= 3.5.2 and
AWS-LC, and for TLS/TCP, it only works with OpenSSL, and frontends
require that an ALPN be sent by the client to use the early data before
the handshake.
Released version 3.3-dev14 with the following main changes :
- MINOR: stick-tables: Rename stksess shards to use buckets
- MINOR: quic: do not use quic_newcid_from_hash64 on BE side
- MINOR: quic: support multiple random CID generation for BE side
- MINOR: quic: try to clarify quic_conn CIDs fields direction
- MINOR: quic: refactor qc_new_conn() prototype
- MINOR: quic: remove <ipv4> arg from qc_new_conn()
- MEDIUM: mworker: set the mworker-max-reloads to 50
- BUG/MEDIUM: quic-be: prevent use of MUX for 0-RTT sessions without secrets
- CLEANUP: startup: move confusing msg variable
- BUG/MEDIUM: mworker: signals inconsistencies during startup and reload
- BUG/MINOR: mworker: wrong signals during startup
- BUG/MINOR: acme: P-256 doesn't work with openssl >= 3.0
- REGTESTS: ssl: split the SSL reuse test into TLS 1.2/1.3
- BUILD: Makefile: make install with admin tools
- CI: github: make install-bin instead of make install
- BUG/MINOR: ssl: remove dead code in ssl_sock_from_buf()
- BUG/MINOR: mux-quic: implement max-reuse server parameter
- MINOR: quic: fix trace on quic_conn_closed release
- BUG/MINOR: quic: do not decrement jobs for backend conns
- BUG/MINOR: quic: fix FD usage for quic_conn_closed on backend side
- BUILD: Makefile: remove halog from install-admin
- REGTESTS: ssl: add basic 0rtt tests for TLSv1.2, TLSv1.3 and QUIC
- REGTESTS: ssl: also verify that 0-rtt properly advertises early-data:1
- MINOR: quic/flags: add missing QUIC flags for flags dev tool.
- MINOR: quic: uneeded xprt context variable passed as parameter
- MINOR: limits: keep a copy of the rough estimate of needed FDs in global struct
- MINOR: limits: explain a bit better what to do when fd limits are exceeded
- BUG/MEDIUM: quic-be/ssl_sock: TLS callback called without connection
- BUG/MINOR: acme: alert when the map doesn't exist at startup
- DOC: acme: add details about the DNS-01 support
- DOC: acme: explain how to dump the certificates
- DOC: acme: configuring acme needs a crt file
- DOC: acme: add details about key pair generation in ACME section
- BUG/MEDIUM: queues: Don't forget to unlock the queue before exiting
- MINOR: muxes: Support an optional ALPN string when defining mux protocols
- MINOR: config: Do proto detection for listeners before checks about ALPN
- BUG/MEDIUM: config: Use the mux protocol ALPN by default for listeners if forced
- DOC: config: Add a note about conflict with ALPN/NPN settings and proto keyword
- MINOR: quic: store source address for backend conns
- BUG/MINOR: quic: flag conn with CO_FL_FDLESS on backend side
- ADMIN: dump-certs: let dry-run compare certificates
- BUG/MEDIUM: connection/ssl: also fix the ssl_sock_io_cb() regarding idle list
- DOC: http: document 413 response code
- MINOR: limits: display the computed maxconn using ha_notice()
- BUG/MEDIUM: applet: Fix conditions to detect spinning loop with the new API
- BUG/MEDIUM: cli: State the cli have no more data to deliver if it yields
- MINOR: h3: adjust sedesc update for known input payload len
- BUG/MINOR: mux-quic: fix sedesc leak on BE side
- OPTIM: mux-quic: delay FE sedesc alloc to stream creation
- BUG/MEDIUM: quic-be: quic_conn_closed buffer overflow
- BUG/MINOR: mux-quic: check access on qcs stream-endpoint
- BUG/MINOR: acme: handle multiple auth with the same name
- BUG/MINOR: acme: prevent creating map entries with dns-01
If a mux protocol is forced and an incompatible ALPN or NPN settings are
used, connection errors may be experienced. There is no check performed
during HAProxy startup and It is not necessarily obvious. So a note is added
to warn users about this usage.
There was no mworker-max-reload value by default, it was set to INT_MAX
so this was impossible to reach.
The default value is now 50, which is still high, but no workers should
undergo that much reloads. Meaning that a worker will be killed with
SIGTERM if it reach this much reloads.
Released version 3.3-dev13 with the following main changes :
- BUG/MEDIUM: config: for word expansion, empty or non-existing are the same
- BUG/MINOR: quic: close connection on CID alloc failure
- MINOR: quic: adjust CID conn tree alloc in qc_new_conn()
- MINOR: quic: split CID alloc/generation function
- BUG/MEDIUM: quic: handle collision on CID generation
- MINOR: quic: extend traces on CID allocation
- MEDIUM/OPTIM: quic: alloc quic_conn after CID collision check
- MINOR: stats-proxy: ensure future-proof FN_AGE manipulation in me_generate_field()
- BUG/MEDIUM: stats-file: fix shm-stats-file preload not working anymore
- BUG/MINOR: do not account backend connections into maxconn
- BUG/MEDIUM: init: 'devnullfd' not properly closed for master
- BUG/MINOR: acme: more explicit error when BIO_new_file()
- BUG/MEDIUM: quic-be: do not launch the connection migration process
- MINOR: quic-be: Parse the NEW_TOKEN frame
- MEDIUM: quic-be: Parse, store and reuse tokens provided by NEW_TOKEN
- MINOR: quic-be: helper functions to save/restore transport params (0-RTT)
- MINOR: quic-be: helper quic_reuse_srv_params() function to reuse server params (0-RTT)
- MINOR: quic-be: Save the backend 0-RTT parameters
- MEDIUM: quic-be: modify ssl_sock_srv_try_reuse_sess() to reuse backend sessions (0-RTT)
- MINOR: quic-be: allow the preparation of 0-RTT packets
- MINOR: quic-be: Send post handshake frames from list of frames (0-RTT)
- MEDIUM: quic-be: qc_send_mux() adaptation for 0-RTT
- MINOR: quic-be: discard the 0-RTT keys
- MEDIUM: quic-be: enable the use of 0-RTT
- MINOR: quic-be: validate the 0-RTT transport parameters
- MINOR: quic-be: do not create the mux after handshake completion (for 0-RTT)
- MINOR: quic-be: avoid a useless I/O callback wakeup for 0-RTT sessions
- BUG/MEDIUM: acme: move from mt_list to a rwlock + ebmbtree
- BUG/MINOR: acme: can't override the default resolver
- MINOR: ssl/sample: expose ssl_*c_curve for AWS-LC
- MINOR: check: delay MUX init when SSL ALPN is used
- MINOR: cfgdiag: adjust diag on servers
- BUG/MINOR: check: only try connection reuse for http-check rulesets
- BUG/MINOR: check: fix reuse-pool if MUX inherited from server
- MINOR: check: clarify check-reuse-pool interaction with reuse policy
- DOC: configuration: add missing ssllib_name_startswith()
- DOC: configuration: add missing openssl_version predicates
- MINOR: cfgcond: add "awslc_api_atleast" and "awslc_api_before"
- REGTESTS: ssl: activate ssl_curve_name.vtc for AWS-LC
- BUILD: ech: fix clang warnings
- BUG/MEDIUM: stick-tables: Always return the good stksess from stktable_set_entry
- BUG/MINOR: stick-tables: Fix return value for __stksess_kill()
- CLEANUP: stick-tables: Don't needlessly compute shard number in stksess_free()
- MINOR: h1: h1_release() should return if it destroyed the connection
- BUG/MEDIUM: h1: prevent a crash on HTTP/2 upgrade
- MINOR: check: use auto SNI for QUIC checks
- MINOR: check: ensure QUIC checks configuration coherency
- CLEANUP: peers: remove an unneeded null check
- Revert "BUG/MEDIUM: connections: permit to permanently remove an idle conn"
- BUG/MEDIUM: connection: do not reinsert a purgeable conn in idle list
- DEBUG: extend DEBUG_STRESS to ease testing and turn on extra checks
- DEBUG: add BUG_ON_STRESS(): a BUG_ON() implemented only when DEBUG_STRESS > 0
- DEBUG: servers: add a few checks for stress-testing idle conns
- BUG/MINOR: check: fix QUIC check test when QUIC disabled
- BUG/MINOR: quic-be: missing version negotiation
- CLEANUP: quic: Missing succesful SSL handshake backend trace (OpenSSL 3.5)
- BUG/MINOR: quic-be: backend SSL session reuse fix (OpenSSL 3.5)
- REGTEST: quic: quic/ssl_reuse.vtc supports OpenSSL 3.5 QUIC API
QUIC is now supported on the backend side, thus it is possible to use it
with server checks. However, checks configuration can be quite
extensive, differing greatly from the server settings.
This patch ensures that QUIC checks are always performed under a
controlled context. Objectives are to avoid any crashes and ensure that
there is no suprise for users in respect to the configuration.
The first part of this patch ensures that QUIC checks can only be
activated on QUIC servers. Indeed, QUIC requires dedicated
initialization steps prior to its usage.
The other part of this patch disables QUIC usage when one or multiple
specific check connection settings are specified in the configuration,
diverging from the server settings. This is the simplest solution for
now and ensure that there is no hidden behavior to users. This means
that it's currently impossible to perform QUIC checks if other endpoints
that the server itself. However for now there is no real use-case for
this scenario.
Along with these changes, check-proto documentation is updated to
clarify QUIC checks behavior.
AWS-LC features are not easily tested with just the openssl version
constant. AWS-LC uses its own API versioning stored in the
AWSLC_API_VERSION constant.
This patch add the two awslc_api_atleast and awslc_api_before predicates
that help to check the AWS-LC API.
Add missing openssl_version_atleast() and openssl_version_before()
predicates.
The predicates exist since 3aeb3f9347 ("MINOR: cfgcond: implements
openssl_version_atleast and openssl_version_before").
Must be backported in every stable versions.
Add the missing ssllib_name_startswith() predicate in the documentation.
The predicate was introduced with b01179aa9 ("MINOR: ssl: Add
ssllib_name_startswith precondition").
Must be backported as far as 2.6.
check-reuse-pool can only perform as expected if reuse policy on the
backend is set to aggressive or higher. Update the documentation to
reflect this and implement a server diag warning.
In 3.2, a new server keyword "check-reuse-pool" has been introduced. It
allows to reuse a connection for a new check, instead of always
initializing a new one. This is only performed if the check does not
rely on specific connection parameters differing from the server.
This patch further restricts reuse for checks only when an HTTP ruleset
is used at the backend level. Indeed, reusing a connection outside of
HTTP is an undefined behavior. The impact of this bug is unknown and
depends on the proxy/server configuration. In the case of an HTTP
backend with non-HTTP checks, check-reuse-pool would probably cause a
drop in reuse rate.
Along this change, implement a new diagnostic warning on servers to
report that check-reuse-pool cannot apply due to an incompatible check
type.
This must be backported up to 3.2.
The underlying SSL_get_negotiated_group function has been backported
into AWS-LC [1], so expose the feature for users of this TLS stack
as well. Note that even though it was actually added in AWS-LC 1.56.0,
we require AWSLC_API_VERSION >= 35 which was released in AWS-LC 1.57.0,
because API version wasn't incremented after this change. As the delta
is one minor version (less than two weeks), I consider this acceptable
to avoid relying on a proxy constant like TLSEXT_nid_unknown which
might be removed at some point.
[1] d6a37244ad
Released version 3.3-dev12 with the following main changes :
- MINOR: quic: enable SSL on QUIC servers automatically
- MINOR: quic: reject conf with QUIC servers if not compiled
- OPTIM: quic: adjust automatic ALPN setting for QUIC servers
- MINOR: sample: optional AAD parameter support to aes_gcm_enc/dec
- REGTESTS: converters: check USE_OPENSSL in aes_gcm.vtc
- BUG/MINOR: resolvers: ensure fair round robin iteration
- BUG/MAJOR: stats-file: fix crash on non-x86 platform caused by unaligned cast
- OPTIM: backend: skip conn reuse for incompatible proxies
- SCRIPTS: build-ssl: allow to build a FIPS version without FIPS
- OPTIM: proxy: move atomically access fields out of the read-only ones
- SCRIPTS: build-ssl: fix rpath in AWS-LC install for openssl and bssl bin
- CI: github: update to macos-26
- BUG/MINOR: quic: fix crash on client handshake abort
- MINOR: quic: do not set conn member if ssl_sock_ctx
- MINOR: quic: remove connection arg from qc_new_conn()
- BUG/MEDIUM: server: Add a rwlock to path parameter
- BUG/MEDIUM: server: Also call srv_reset_path_parameters() on srv up
- BUG/MEDIUM: mux-h1: fix 414 / 431 status code reporting
- BUG/MEDIUM: mux-h2: make sure not to move a dead connection to idle
- BUG/MEDIUM: connections: permit to permanently remove an idle conn
- MEDIUM: cfgparse: deprecate 'master-worker' keyword alone
- MEDIUM: cfgparse: 'daemon' not compatible with -Ws
- DOC: configuration: deprecate the master-worker keyword
- MINOR: quic: remove <mux_state> field
- BUG/MEDIUM: stick-tables: Make sure we handle expiration on all tables
- MEDIUM: stick-tables: Optimize the expiration process a bit.
- MEDIUM: ssl/ckch: use ckch_store instead of ckch_data for ckch_conf_kws
- MINOR: acme: generate a temporary key pair
- MEDIUM: acme: generate a key pair when no file are available
- BUILD: ssl/ckch: wrong function name in ckch_conf_kws
- BUILD: acme: acme_gen_tmp_x509() signedness and unused variables
- BUG/MINOR: acme: fix initialization issue in acme_gen_tmp_x509()
- BUILD: ssl/ckch: fix ckch_conf_kws parsing without ACME
- MINOR: server: move the lock inside srv_add_idle()
- DOC: acme: crt-store allows you to start without a certificate
- BUG/MINOR: acme: allow 'key' when generating cert
- MINOR: stconn: Add counters to SC to know number of bytes received and sent
- MINOR: stream: Add samples to get number of bytes received or sent on each side
- MINOR: counters: Add req_in/req_out/res_in/res_out counters for fe/be/srv/li
- MINOR: stream: Remove bytes_in and bytes_out counters from stream
- MINOR: counters: Remove bytes_in and bytes_out counter from fe/be/srv/li
- MINOR: stats: Add stats about request and response bytes received and sent
- MINOR: applet: Add function to get amount of data in the output buffer
- MINOR: channel: Remove total field from channels
- DEBUG: stream: Add bytes_in/bytes_out value for both SC in session dump
- MEDIUM: stktables: Limit the number of stick counters to 100
- BUG/MINOR: config: Limit "tune.maxpollevents" parameter to 1000000
- BUG/MEDIUM: server: close a race around ready_srv when deleting a server
- BUG/MINOR: config: emit warning for empty args when *not* in discovery mode
- BUG/MEDIUM: config: solve the empty argument problem again
- MEDIUM: config: now reject configs with empty arguments
- MINOR: tools: add support for ist to the word fingerprinting functions
- MINOR: tools: add env_suggest() to suggest alternate variable names
- MINOR: tools: have parse_line's error pointer point to unknown variable names
- MINOR: cfgparse: try to suggest correct variable names on errors
- IMPORT: cebtree: Replace offset calculation with offsetof to avoid UB
- BUG/MINOR: acme: wrong dns-01 challenge in the log
- MEDIUM: backend: Defer conn_xprt_start() after mux creation
- MINOR: peers: Improve traces for peers
- MEDIUM: peers: No longer ack updates during a full resync
- MEDIUM: peers: Remove commitupdate field on stick-tables
- BUG/MEDIUM: peers: Fix update message parsing during a full resync
- MINOR: sample/stats: Add "bytes" in req_{in,out} and res_{in,out} names
- BUG/MEDIUM: stick-tables: Make sure updates are seen as local
- BUG/MEDIUM: proxy: use aligned allocations for struct proxy
- BUG/MEDIUM: proxy: use aligned allocations for struct proxy_per_tgroup
- BUG/MINOR: acme: avoid a possible crash on error paths
Number of bytes received or sent by a client or a server are now
saved. Sample fetches and stats fields to retrieve these informations are
renamed to add "bytes" in names to avoid any ambiguity with number of
requests and responses.
"tune.maxpollevents" global parameter was not limited. It was possible to
set any integer value. But this value is used to allocate the array of
events used by epoll. With a huge value, it seems the allocation silently
fail, making haproxy totally unresponsive.
So let's to limit its value to 1 million. It is pretty high and it should
not be an issue to forbid greater values. The documentation was updated
accordingly.
This patch could be backported to all stable branches.
"tune.stick-counters" global parameter was accepting any positive integer
value. But the maximum value is incredibly high. Setting a huge value has
signitifcant impact on memory and CPU usage. To avoid any issue, this value
is now limited to 100. It should be greater enough to all usage.
It can be seen as a breaking change.
per-stream bytes_in and bytes_out counters was removed and replaced by
req.in and res.in. Coorresponding samples still exists but replies on new
counters.
This patch is related to issue #1617.
req.in and req.out samples can now be used to get the number of bytes
received by a client and send to the server. And res.in and res.out samples
can be used to get the number of bytes received by a server and send to the
client. These info are stored in the logs structure inside a stream.
This patch is related to issue #1617.
If your acme certificate is declared in a crt-store, and the certificate
file does not exist on the disk, HAProxy will start with a temporary key
pair.
Deprecate the 'master-worker' keyword in the global section.
Split the configuration of the 'no-exit-on-failure' subkeyword in
another section which is not deprecated yet and explains that its only
meant for debugging purpose.
The aes_gcm_enc() and aes_gcm_dec() sample converters now accept an
optional fifth argument for Additional Authenticated Data (AAD). When
provided, the AAD value is base64-decoded and used during AES-GCM
encryption or decryption. Both string and variable forms are supported.
This enables use cases that require authentication of additional data.
If a QUIC server is declared without ALPN, "h3" value is automatically
set during _srv_parse_finalize().
This patch adjusts this operation. Instead of relying on
ssl_sock_parse_alpn(), a plain strdup() is used. This is considered more
efficient as the ALPN string is constant in this case. This method is
already used for listeners on the frontend side.
Released version 3.3-dev11 with the following main changes :
- BUG/MEDIUM: mt_list: Make sure not to unlock the element twice
- BUG/MINOR: quic-be: unchecked connections during handshakes
- BUG/MEDIUM: cli: also free the trash chunk on the error path
- MINOR: initcalls: Add a new initcall stage, STG_INIT_2
- MEDIUM: stick-tables: Use a per-shard expiration task
- MEDIUM: stick-tables: Remove the table lock
- MEDIUM: stick-tables: Stop if stktable_trash_oldest() fails.
- MEDIUM: stick-tables: Stop as soon as stktable_trash_oldest succeeds.
- BUG/MEDIUM: h1-htx: Don't set HTX_FL_EOM flag on 1xx informational messages
- BUG/MEDIUM: h3: properly encode response after interim one in same buf
- BUG/MAJOR: pools: fix default pool alignment
- MINOR: ncbuf: extract common types
- MINOR: ncbmbuf: define new ncbmbuf type
- MINOR: ncbmbuf: implement add
- MINOR: ncbmbuf: implement iterator bitmap utilities functions
- MINOR: ncbmbuf: implement ncbmb_data()
- MINOR: ncbmbuf: implement advance operation
- MINOR: ncbmbuf: add tests as standalone mode
- BUG/MAJOR: quic: use ncbmbuf for CRYPTO handling
- MINOR: quic: remove received CRYPTO temporary tree storage
- MINOR: stats-file: fix typo in shm-stats-file object struct size detection
- MINOR: compiler: add FIXED_SIZE(size, type, name) macro
- MEDIUM: freq-ctr: use explicit-size types for freq-ctr struct
- BUG/MAJOR: stats-file: ensure shm_stats_file_object struct mapping consistency
- BUG/MEDIUM: build: limit excessive and counter-productive gcc-15 vectorization
- BUG/MEDIUM: stick-tables: Don't loop if there's nothing left
- MINOR: acme: add the dns-01-record field to the sink
- MINOR: acme: display the complete challenge_ready command in the logs
- BUG/MEDIUM: mt_lists: Avoid el->prev = el->next = el
- MINOR: quic: remove unused conn-tx-buffers limit keyword
- MINOR: quic: prepare support for options on FE/BE side
- MINOR: quic: rename "no-quic" to "tune.quic.listen"
- MINOR: quic: duplicate glitches FE option on BE side
- MINOR: quic: split congestion controler options for FE/BE usage
- MINOR: quic: split Tx options for FE/BE usage
- MINOR: quic: rename max Tx mem setting
- MINOR: quic: rename retry-threshold setting
- MINOR: quic: rename frontend sock-per-conn setting
- BUG/MINOR: quic: split max-idle-timeout option for FE/BE usage
- BUG/MINOR: quic: split option for congestion max window size
- BUG/MINOR: quic: rename and duplicate stream settings
- BUG/MEDIUM: applet: Improve again spinning loops detection with the new API
- Revert "BUG/MAJOR: stats-file: ensure shm_stats_file_object struct mapping consistency"
- Revert "MEDIUM: freq-ctr: use explicit-size types for freq-ctr struct"
- Revert "MINOR: compiler: add FIXED_SIZE(size, type, name) macro"
- BUG/MAJOR: stats-file: ensure shm_stats_file_object struct mapping consistency (2nd attempt)
- BUG/MINOR: stick-tables: properly index string-type keys
- BUILD: openssl-compat: fix build failure with OPENSSL=0 and KTLS=1
- BUG/MEDIUM: mt_list: Use atomic operations to prevent compiler optims
- MEDIUM: quic: Fix build with openssl-compat
- MINOR: applet: do not put SE_FL_WANT_ROOM on rcv_buf() if the channel is empty
- MINOR: cli: create cli_raw_rcv_buf() from the generic applet_raw_rcv_buf()
- BUG/MEDIUM: cli: do not return ACKs one char at a time
- BUG/MEDIUM: ssl: Crash because of dangling ckch_store reference in a ckch instance
- BUG/MINOR: ssl: Remove unreachable code in CLI function
- BUG/MINOR: acl: warn if "_sub" derivative used with an explicit match
- DOC: config: fix confusing typo about ACL -m ("now" vs "not")
- DOC: config: slightly clarify the ssl_fc_has_early() behavior
- MINOR: ssl-sample: add ssl_fc_early_rcvd() to detect use of early data
- CI: disable fail-fast on fedora rawhide builds
- MINOR: http: fix 405,431,501 default errorfile
- BUG/MINOR: init: Do not close previously created fd in stdio_quiet
- MINOR: init: Make devnullfd global and create it earlier in init
- MINOR: init: Use devnullfd in stdio_quiet calls instead of recreating a fd everytime
- MEDIUM: ssl: Add certificate password callback that calls external command
- MEDIUM: ssl: Add local passphrase cache
- MINOR: ssl: Do not dump decrypted privkeys in 'dump ssl cert'
- BUG/MINOR: resolvers: Apply dns-accept-family setting on additional records
- MEDIUM: h1: Immediately try to read data for frontend
- REGTEST: quic: add ssl_reuse.vtc new QUIC test
- BUG/MINOR: ssl: returns when SSL_CTX_new failed during init
- MEDIUM: ssl/ech: config and load keys
- MINOR: ssl/ech: add logging and sample fetches for ECH status and outer SNI
- MINOR: listener: implement bind_conf_find_by_name()
- MINOR: ssl/ech: key management via stats socket
- CI: github: add USE_ECH=1 to haproxy for openssl-ech job
- DOC: configuration: "ech" for bind lines
- BUG/MINOR: ech: non destructive parsing in cli_find_ech_specific_ctx()
- DOC: management: document ECH CLI commands
- MEDIUM: mux-h2: do not needlessly refrain from sending data early
- MINOR: mux-h2: extract the code to send preface+settings into its own function
- BUG/MINOR: mux-h2: send the preface along with the first request if needed
ECH is an experimental features which still a draft, but already exists as a
feature branch in OpenSSL.
This patch explains how to configure "ech" on bind lines.
When a certificate is protected by a password, we can provide the
password via the dedicated pem_password_cb param provided to
PEM_read_bio_PrivateKey.
HAProxy will fetch the password automatically during init by calling a
user-defined external command that should dump the right password on its
standard output (see new 'ssl-passphrase-cmd' global option).
We currently have ssl_fc_has_early() which says that early data are still
unconfirmed by a final handshake, but nothing to see if a client has been
able to use early data at all, which is a problem because such mechanisms
generally depend on multiple factors and it's hard to know when they start
to work. This new sample fetch function will indicate that some early data
were seen over that front connection, i.e. this can be used to confirm
that at some point the client was able to push some. This is essentially
a debugging tool that has no practical use case other than debugging.
Clarify that it's about handshake *completion*, and also mention that
the action to be used to wait for the handshake is "wait-for-handshake",
which was not mentioned.
This can be backported though it's very minor.
A one-letter typo in the doc update comint with commit 6ea50ba462 ("MINOR:
acl; Warn when matching method based on a suffix is overwritten") inverts
the meaning of the sentence. It was "is not allowed" and not
"is now allowed". Needs to be backported only if the commit above ever is
(unlikely).
Several settings can be set to control stream multiplexing and
associated receive window. Previously, all of these settings were
configured using prefix "tune.quic.frontend.", despite being applied
blindly on both sides.
Fix this by duplicating these settings specific to frontend and backend
side. Options are also renamed to use the standardize prefix
"tune.quic.[be|fe].stream." notation.
Also, each option is individually renamed to better reflect its purpose
and hide technical details relative to QUIC transport parameter naming :
* max-data-size -> stream.rxbuf
* max-streams-bidi -> stream.max-concurrent
* stream-data-ratio -> stream.data-ratio
No need to backport.
Streamline max-idle-timeout option. Rename it to use the newer cohesive
naming scheme 'tune.quic.fe|be.'.
Two different fields were already defined in global struct. These fields
are moved into quic_tune along with other QUIC settings. However, no
parser was defined for backend option, this commit fixes this.
No need to backport this.
On frontend side, a quic_conn can have a dedicated FD or use the
listener one. These different modes can be activated via a global QUIC
tune setting.
This patch adjusts the option. First, it is renamed to the more
meaningful name 'tune.quic.fe.sock-per-conn'. Also, arguments are now
either 'default-on' or 'force-off'. The objective is to better highlight
reliationship with 'quic-socket' bind option.
The older option is deprecated and will be removed in 3.5.
A QUIC global tune setting is defined to be able to force Retry emission
prior to handshake. By definition, this ability is only supported by
QUIC servers, hence it is a frontend option only.
Rename the option to use "fe" prefix. The old option name is deprecated
and will be removed in 3.5
QUIC global memory can be limited across the entire process via a global
tune setting. Previously, this setting used to misleading "frontend"
prefix. As this is applied as a sum between all QUIC connections, both
from frontend and backend sides, remove the prefix. The new option name
is "tune.quic.mem.tx-max".
The older option name is deprecated and will be removed in 3.5.
This patch is similar to the previous one, except that it is focused on
Tx QUIC settings. It is now possible to toggle GSO and pacing on
frontend and backend sides independently.
As with previous patch, option are renamed to use "fe/be" unified
prefixes. This is part of the current serie of commits which unify QUI
settings. Older options are deprecated and will be removed on 3.5
release.
Various settings can be configured related to QUIC congestion controler.
This patch duplicates them to be able to set independent values on
frontend and backend sides.
As with previous patch, option are renamed to use "fe/be" unified
prefixes. This is part of the current serie of commits which unify QUIC
settings. Older options are deprecated and will be removed on 3.5
release.
Previously, QUIC glitches support was only implemented for frontend
side. Extend this so that the option can be specified separately both on
frontend and backend sides. Function _qcc_report_glitch() now retrieves
the relevant max value based on connection side.
In addition to this, option has been renamed to use "fe/be" prefixes.
This is part of the current serie of commits which unify QUIC settings.
Older options are deprecated and will be removed on 3.5 release.
Rename the option to quickly enable/disable every QUIC listeners. It now
takes an argument on/off. The documentation is extended to reflect the
fact that QUIC backend are not impacted by this option.
The older keyword is simply removed. Deprecation is considered
unnecessary as this setting is only useful during debugging.
Released version 3.3-dev10 with the following main changes :
- BUG/MEDIUM: connections: Only avoid creating a mux if we have one
- BUG/MINOR: sink: retry attempt for sft server may never occur
- CLEANUP: mjson: remove MJSON_ENABLE_RPC code
- CLEANUP: mjson: remove MJSON_ENABLE_PRINT code
- CLEANUP: mjson: remove MJSON_ENABLE_NEXT code
- CLEANUP: mjson: remove MJSON_ENABLE_BASE64 code
- CLEANUP: mjson: remove unused defines and math.h
- BUG/MINOR: http-ana: Reset analyse_exp date after 'wait-for-body' action
- CLEANUP: mjson: remove unused defines from mjson.h
- BUG/MINOR: acme: avoid overflow when diff > notAfter
- DEV: patchbot: use git reset+checkout instead of pull
- MINOR: proxy: explicitly permit abortonclose on frontends and clarify the doc
- REGTESTS: fix h2_desync_attacks to wait for the response
- REGTESTS: http-messaging: fix the websocket and upgrade tests not to close early
- MINOR: proxy: only check abortonclose through a dedicated function
- MAJOR: proxy: enable abortonclose by default on HTTP proxies
- MINOR: proxy: introduce proxy_abrt_close_def() to pass the desired default
- MAJOR: proxy: enable abortonclose by default on TLS listeners
- MINOR: h3/qmux: Set QC_SF_UNKNOWN_PL_LENGTH flag on QCS when headers are sent
- MINOR: stconn: Add two fields in sedesc to replace the HTX extra value
- MINOR: h1-htx: Increment body len when parsing a payload with no xfer length
- MINOR: mux-h1: Set known input payload length during demux
- MINOR: mux-fcgi: Set known input payload length during demux
- MINOR: mux-h2: Use <body_len> H2S field for payload without content-length
- MINOR: mux-h2: Set known input payload length of the sedesc
- MINOR: h3: Set known input payload length of the sedesc
- MINOR: stconn: Move data from kip to kop when data are sent to the consumer
- MINOR: filters: Reset knwon input payload length if a data filter is used
- MINOR: hlua/http-fetch: Use <kip> instead of HTX extra field to get body size
- MINOR: cache: Use the <kip> value to check too big objects
- MINOR: compression: Use the <kip> value to check body size
- MEDIUM: mux-h1: Stop to use HTX extra value when formatting message
- MEDIUM: htx: Remove the HTX extra field
- MEDIUM: acme: don't insert acme account key in ckchs_tree
- BUG/MINOR: acme: memory leak from the config parser
- CI: cirrus-ci: bump FreeBSD image to 14-3
- BUG/MEDIUM: ssl: take care of second client hello
- BUG/MINOR: ssl: always clear the remains of the first hello for the second one
- BUG/MEDIUM: stconn: Properly forward kip to the opposite SE descriptor
- MEDIUM: applet: Forward <kip> to applets
- DEBUG: mux-h1: Dump <kip> and <kop> values with sedesc info
- BUG/MINOR: ssl: leak in ssl-f-use
- BUG/MINOR: ssl: leak crtlist_name in ssl-f-use
- BUILD: makefile: disable tail calls optimizations with memory profiling
- BUG/MEDIUM: apppet: Improve spinning loop detection with the new API
- BUG/MINOR: ssl: Free global_ssl structure contents during deinit
- BUG/MINOR: ssl: Free key_base from global_ssl structure during deinit
- MEDIUM: jwt: Remove certificate support in jwt_verify converter
- MINOR: jwt: Add new jwt_verify_cert converter
- MINOR: jwt: Do not look into ckch_store for jwt_verify converter
- MINOR: jwt: Add new "jwt" certificate option
- MINOR: jwt: Add specific error code for known but unavailable certificate
- DOC: jwt: Add doc about "jwt_verify_cert" converter
- MINOR: ssl: Dump options in "show ssl cert"
- MINOR: jwt: Add new "add/del/show ssl jwt" CLI commands
- REGTEST: jwt: Test new CLI commands
- BUG/MINOR: ssl: Potential NULL deref in trace macro
- MINOR: regex: use a thread-local match pointer for pcre2
- BUG/MEDIUM: pools: fix bad freeing of aligned pools in UAF mode
- MEDIUM: pools: detect() when munmap() fails in UAF mode
- TESTS: quic: useless param for b_quic_dec_int()
- BUG/MEDIUM: pools: fix crash on filtered "show pools" output
- BUG/MINOR: pools: don't report "limited to the first X entries" by default
- BUG/MAJOR: lb-chash: fix key calculation when using default hash-key id
- BUG/MEDIUM: stick-tables: Don't forget to dec count on failure.
- BUG/MINOR: quic: check applet_putchk() for 'show quic' first line
- TESTS: quic: fix uninit of quic_cc_path const member
- BUILD: ssl: can't build when using -DLISTEN_DEFAULT_CIPHERS
- BUG/MAJOR: quic: uninitialized quic_conn_closed struct members
- BUG/MAJOR: quic: do not reset QUIC backends fds in closing state
- BUG/MINOR: quic: SSL counters not handled
- DOC: clarify the experimental status for certain features
- MINOR: config: remove experimental status on tune.disable-fast-forward
- MINOR: tree-wide: add missing TAINTED flags for some experimental directives
- MEDIUM: config: warn when expose-experimental-directives is used for no reason
- BUG/MEDIUM: threads/config: drop absent threads from thread groups
- REGTESTS: remove experimental from quic/retry.vtc
If users start to enable expose-experimental-directives for the purpose
of testing one specific feature, there are chances that the option remains
forever and hides the experimental status of other options.
Let's emit a warning if the option appears and is not used. This will
remind users that they can now drop it, and help keep configs safe for
future upgrades.
The option was turned to off by default in 2.8 with commit 2f7c82bfd
("BUG/MINOR: haproxy: Fix option to disable the fast-forward"), however
at the same time it should have dropped its experimental status since
the feature is enabled by default. The only goal of the option is to
debug something, like many other tune.xxx options. The option should
still normally not be used without being invited to do so by developers
looking for something specific though.
This could be backported if desired to simplify debugging, though this
has never been needed for now.
Certain features require "expose-experimental-directives" to be set in
the global section. Let's clarify that experimental featuers are only
maintained in best effort mode, may break during the stable cycle, and
are generally not maintained beyond the release of the next LTS branch
since it is extremely challenging, and early adopters are expected to
upgrade to benefit from improvements anyway.
The new "add/del ssl jwt <file>" commands allow to change the "jwt" flag
of an already loaded certificate. It allows to delete certificates used
for JWT validation, which was not yet possible.
The "show ssl jwt" command iterates over all the ckch_stores and dumps
the ones that have the option set.
Add information about the new "jwt_verify_cert" converter and update the
existing "jwt_converter" doc to remove mentions of certificates from it.
Add information about the new "jwt" certificate option.
In the continuity of https://github.com/orgs/haproxy/discussions/3146,
we must also enable abortonclose by default for TLS listeners so as not
to needlessly compute TLS handshakes on dead connections. The change is
very small (just set the default value to 1 in the TLS code when neither
the option nor its opposite were set).
It may possibly cause some TLS handshakes to start failing with 3.3 in
certain legacy environments (e.g. TLS health-checks performed using only
a client hello and closing afterwards), and in this case it is sufficient
to disable the option using "no option abortonclose" in either the
affected frontend or the "defaults" section it derives from.
As discussed on https://github.com/orgs/haproxy/discussions/3146 and on
the mailing list, there's a marked preference for having abortonclose
enabled by default when relevant. The point being that with todays'
internet, the large majority of requests sent with a closed input
channel are aborted requests, and that it's pointless to waste resources
processing them.
This patch now considers both "option abortonclose" and its opposite
"no option abortonclose" to figure whether abortonclose is enabled or
disabled in a backend. When neither are set (thus not even inherited
from a defaults section), then it considers the proxy's mode, and HTTP
mode implies abortonclose by default.
This may make some legacy services fail starting with 3.3. In this case
it will be sufficient to add "no option abortonclose" in either the
affected backend or the defaults section it derives from. But for
internet-facing proxies it's better to stay with the option enabled.
The "abortonclose" option was recently deprecated in frontends because its
action was essentially limited to the backend part (queuing etc). But in
3.3 we started to support it for TLS on frontends, though it would only
work when placed in a defaults section. Let's officially support it in
frontends, and take this opportunity to clarify the documentation on this
topic, which was incomplete regarding frontend and TLS support. Now the
doc tries to better cover the different use cases.
Released version 3.3-dev9 with the following main changes :
- BUG/MINOR: acl: Fix error message about several '-m' parameters
- MINOR: server: Parse sni and pool-conn-name expressions in a dedicated function
- BUG/MEDIUM: server: Use sni as pool connection name for SSL server only
- BUG/MINOR: server: Update healthcheck when server settings are changed via CLI
- OPTIM: backend: Don't set SNI for non-ssl connections
- OPTIM: proto_rhttp: Don't set SNI for non-ssl connections
- OPTIM: tcpcheck: Don't set SNI and ALPN for non-ssl connections
- BUG/MINOR: tcpcheck: Don't use sni as pool-conn-name for non-SSL connections
- MEDIUM: server/ssl: Base the SNI value to the HTTP host header by default
- MEDIUM: httpcheck/ssl: Base the SNI value on the HTTP host header by default
- OPTIM: tcpcheck: Reorder tcpchek_connect structure fields to fill holes
- REGTESTS: ssl: Add a script to test the automatic SNI selection
- MINOR: quic: add useful trace about padding params values
- BUG/MINOR: quic: too short PADDING frame for too short packets
- BUG/MINOR: cpu_topo: work around a small bug in musl's CPU_ISSET()
- BUG/MEDIUM: ssl: Properly initialize msg_controllen.
- MINOR: quic: SSL session reuse for QUIC
- BUG/MEDIUM: proxy: fix crash with stop_proxy() called during init
- MINOR: stats-file: use explicit unsigned integer bitshift for user slots
- CLEANUP: quic: fix typo in quic_tx trace
- TESTS: quic: add unit-tests for QUIC TX part
- MINOR: quic: restore QUIC_HP_SAMPLE_LEN constant
- REGTESTS: ssl: Fix the script about automatic SNI selection
- BUG/MINOR: pools: Fix the dump of pools info to deal with buffers limitations
- MINOR: pools: Don't dump anymore info about pools when purge is forced
- BUG/MINOR: quic: properly support GSO on backend side
- BUG/MEDIUM: mux-h2: Reset MUX blocking flags when a send error is caught
- BUG/MEDIUM: mux-h2; Don't block reveives in H2_CS_ERROR and H2_CS_ERROR2 states
- BUG/MEDIUM: mux-h2: Restart reading when mbuf ring is no longer full
- BUG/MINOR: mux-h2: Remove H2_CF_DEM_DFULL flags when the demux buffer is reset
- BUG/MEDIUM: mux-h2: Report RST/error to app-layer stream during 0-copy fwding
- BUG/MEDIUM: mux-h2: Reinforce conditions to report an error to app-layer stream
- BUG/MINOR: hq-interop: adjust parsing/encoding on backend side
- OPTIM: check: do not delay MUX for ALPN if SSL not active
- BUG/MEDIUM: checks: fix ALPN inheritance from server
- BUG/MINOR: check: ensure checks are compatible with QUIC servers
- MINOR: check: reject invalid check config on a QUIC server
- MINOR: debug: report the process id in warnings and panics
- DEBUG: stream: count the number of passes in the connect loop
- MINOR: debug: report the number of loops and ctxsw for each thread
- MINOR: debug: report the time since last wakeup and call
- DEBUG: peers: export functions that use locks
- MINOR: stick-table: permit stksess_new() to temporarily allocate more entries
- MEDIUM: stick-tables: relax stktable_trash_oldest() to only purge what is needed
- MEDIUM: stick-tables: give up on lock contention in process_table_expire()
- MEDIUM: stick-tables: don't wait indefinitely in stktable_add_pend_updates()
- MEDIUM: peers: don't even try to process updates under contention
- BUG/MEDIUM: h1: Allow reception if we have early data
- BUG/MEDIUM: ssl: create the mux immediately on early data
- MINOR: ssl: Add a flag to let it known we have an ALPN negociated
- MINOR: ssl: Use the new flag to know when the ALPN has been set.
- MEDIUM: server: Introduce the concept of path parameters
- CLEANUP: backend: clarify the role of the init_mux variable in connect_server()
- CLEANUP: backend: invert the condition to start the mux in connect_server()
- CLEANUP: backend: simplify the complex ifdef related to 0RTT in connect_server()
- CLEANUP: backend: clarify the cases where we want to use early data
- MEDIUM: server: Make use of the stored ALPN stored in the server
- BUILD: ssl: address a recent build warning when QUIC is enabled
- BUG/MINOR: activity: fix reporting of task latency
- MINOR: activity: indicate the number of calls on "show tasks"
- MINOR: tools: don't emit "+0" for symbol names which exactly match known ones
- BUG/MEDIUM: stick-tables: don't loop on non-expirable entries
- DEBUG: stick-tables: export stktable_add_pend_updates() for better reporting
- BUG/MEDIUM: ssl: Fix a crash when using QUIC
- BUG/MEDIUM: ssl: Fix a crash if we failed to create the mux
- MEDIUM: dns: bind the nameserver sockets to the initiating thread
- MEDIUM: resolvers: make the process_resolvers() task single-threaded
- BUG/MINOR: stick-table: make sure never to miss a process_table_expire update
- MEDIUM: stick-table: move process_table_expire() to a single thread
- MEDIUM: peers: move process_peer_sync() to a single thread
- BUG/MAJOR: stream: Force channel analysis on successful synchronous send
- MINOR: quic: get rid of ->target quic_conn struct member
- MINOR: quic-be: make SSL/QUIC objects use their own indexes (ssl_qc_app_data_index)
- MINOR: quic: display build warning for compat layer on recent OpenSSL
- DOC: quic: clarifies limited-quic support
- BUG/MINOR: acme: null pointer dereference upon allocation failure
- BUG/MEDIUM: jws: return size_t in JWS functions
- BUG/MINOR: ssl: Potential NULL deref in trace macro
- BUG/MINOR: ssl: Fix potential NULL deref in trace callback
- BUG/MINOR: ocsp: prototype inconsistency
- MINOR: ocsp: put internal functions as static ones
- MINOR: ssl: set functions as static when no protypes in the .h
- BUILD: ssl: functions defined but not used
- BUG/MEDIUM: resolvers: Properly cache do-resolv resolution
- BUG/MINOR: resolvers: Restore round-robin selection on records in DNS answers
- MINOR: activity: don't report the lat_tot column for show profiling tasks
- MINOR: activity: add a new lkw_avg column to show profiling stats
- MINOR: activity: collect time spent waiting on a lock for each task
- MINOR: thread: add a lock level information in the thread_ctx
- MINOR: activity: add a new lkd_avg column to show profiling stats
- MINOR: activity: collect time spent with a lock held for each task
- MINOR: activity: add a new mem_avg column to show profiling stats
- MINOR: activity: collect CPU time spent on memory allocations for each task
- MINOR: activity/memory: count allocations performed under a lock
- DOC: proxy-protocol: Add TLS group and sig scheme TLVs
- BUG/MEDIUM: resolvers: Test for empty tree when getting a record from DNS answer
- BUG/MEDIUM: resolvers: Make resolution owns its hostname_dn value
- BUG/MEDIUM: resolvers: Accept to create resolution without hostname
- BUG/MEDIUM: resolvers: Wake resolver task up whne unlinking a stream requester
- BUG/MINOR: ocsp: Crash when updating CA during ocsp updates
- Revert "BUG/MINOR: ocsp: Crash when updating CA during ocsp updates"
- BUG/MEDIUM: http_ana: fix potential NULL deref in http_process_req_common()
- MEDIUM: log/proxy: store log-steps selection using a bitmask, not an eb tree
- BUG/MINOR: ocsp: Crash when updating CA during ocsp updates
- BUG/MINOR: resolvers: always normalize FQDN from response
- BUILD: makefile: implement support for running a command in range
- IMPORT: cebtree: import version 0.5.0 to support duplicates
- MEDIUM: migrate the patterns reference to cebs_tree
- MEDIUM: guid: switch guid to more compact cebuis_tree
- MEDIUM: server: switch addr_node to cebis_tree
- MEDIUM: server: switch conf.name to cebis_tree
- MEDIUM: server: switch the host_dn member to cebis_tree
- MEDIUM: proxy: switch conf.name to cebis_tree
- MEDIUM: stktable: index table names using compact trees
- MINOR: proxy: add proxy_get_next_id() to find next free proxy ID
- MINOR: listener: add listener_get_next_id() to find next free listener ID
- MINOR: server: add server_get_next_id() to find next free server ID
- CLEANUP: server: use server_find_by_id() when looking for already used IDs
- MINOR: server: add server_index_id() to index a server by its ID
- MINOR: listener: add listener_index_id() to index a listener by its ID
- MINOR: proxy: add proxy_index_id() to index a proxy by its ID
- MEDIUM: proxy: index proxy ID using compact trees
- MEDIUM: listener: index listener ID using compact trees
- MEDIUM: server: index server ID using compact trees
- CLEANUP: server: slightly reorder fields in the struct to plug holes
- CLEANUP: proxy: slightly reorganize fields to plug some holes
- CLEANUP: backend: factor the connection lookup loop
- CLEANUP: server: use eb64_entry() not ebmb_entry() to convert an eb64
- MINOR: server: pass the server and thread to srv_migrate_conns_to_remove()
- CLEANUP: backend: use a single variable for removed in srv_cleanup_idle_conns()
- MINOR: connection: pass the thread number to conn_delete_from_tree()
- MEDIUM: connection: move idle connection trees to ceb64
- MEDIUM: connection: reintegrate conn_hash_node into connection
- CLEANUP: tools: use the item API for the file names tree
- CLEANUP: vars: use the item API for the variables trees
- BUG/MEDIUM: pattern: fix possible infinite loops on deletion
- CI: scripts: add support for git in openssl builds
- CI: github: add an OpenSSL + ECH job
- CI: scripts: mkdir BUILDSSL_TMPDIR
- Revert "BUG/MEDIUM: pattern: fix possible infinite loops on deletion"
- BUG/MEDIUM: pattern: fix possible infinite loops on deletion (try 2)
- CLEANUP: log: remove deadcode in px_parse_log_steps()
- MINOR: counters: document that tg shared counters are tied to shm-stats-file mapping
- DOC: internals: document the shm-stats-file format/mapping
- IMPORT: ebtree: delete unusable ebpttree.c
- IMPORT: eb32/eb64: reorder the lookup loop for modern CPUs
- IMPORT: eb32/eb64: use a more parallelizable check for lack of common bits
- IMPORT: eb32: drop the now useless node_bit variable
- IMPORT: eb32/eb64: place an unlikely() on the leaf test
- IMPORT: ebmb: optimize the lookup for modern CPUs
- IMPORT: eb32/64: optimize insert for modern CPUs
- IMPORT: ebtree: only use __builtin_prefetch() when supported
- IMPORT: ebst: use prefetching in lookup() and insert()
- IMPORT: ebtree: Fix UB from clz(0)
- IMPORT: ebtree: add a definition of offsetof()
- IMPORT: ebtree: replace hand-rolled offsetof to avoid UB
- MINOR: listener: add the "cc" bind keyword to set the TCP congestion controller
- MINOR: server: add the "cc" keyword to set the TCP congestion controller
- BUG/MEDIUM: ring: invert the length check to avoid an int overflow
- MINOR: trace: don't call strlen() on the thread-id numeric encoding
- MINOR: trace: don't call strlen() on the function's name
- OPTIM: sink: reduce contention on sink_announce_dropped()
- OPTIM: sink: don't waste time calling sink_announce_dropped() if busy
- CLEANUP: ring: rearrange the wait loop in ring_write()
- OPTIM: ring: always relax in the ring lock and leader wait loop
- OPTIM: ring: check the queue's owner using a CAS on x86
- OPTIM: ring: avoid reloading the tail_ofs value before the CAS in ring_write()
- BUG/MEDIUM: sink: fix unexpected double postinit of sink backend
- MEDIUM: stats: consider that shared stats pointers may be NULL
- BUG/MEDIUM: http-client: Fix the test on the response start-line
- MINOR: acme: acme-vars allow to pass data to the dpapi sink
- MINOR: acme: check acme-vars allocation during escaping
- BUG/MINOR: acme/cli: wrong description for "acme challenge_ready"
- CI: move VTest preparation & friends to dedicated composite action
- BUG/MEDIUM: stick-tables: Don't let table_process_entry() handle refcnt
- BUG/MINOR: compression: Test payload size only if content-length is specified
- BUG/MINOR: pattern: Properly flag virtual maps as using samples
- BUG/MINOR: acme: possible overflow on scheduling computation
- BUG/MINOR: acme: possible overflow in acme_will_expire()
- CLEANUP: acme: acme_will_expire() uses acme_schedule_date()
- BUG/MINOR: pattern: Fix pattern lookup for map with opt@ prefix
- CI: scripts: build curl with ECH support
- CI: github: add curl+ech build into openssl-ech job
- BUG/MEDIUM: ssl: ca-file directory mode must read every certificates of a file
- MINOR: acme: provider-name for dpapi sink
- BUILD: acme: fix false positive null pointer dereference
- MINOR: backend: srv_queue helper
- MINOR: backend: srv_is_up converter
- BUILD: halog: misleading indentation in halog.c
- CI: github: build halog on the vtest job
- BUG/MINOR: acme: don't unlink from acme_ctx_destroy()
- BUG/MEDIUM: acme: cfg_postsection_acme() don't init correctly acme sections
- MINOR: acme: implement "reuse-key" option
- ADMIN: haproxy-dump-certs: implement a certificate dumper
- ADMIN: dump-certs: don't update the file if it's up to date
- ADMIN: dump-certs: create files in a tmpdir
- ADMIN: dump-certs: fix lack of / in -p
- ADMIN: dump-certs: use same error format as haproxy
- ADMIN: reload: add a synchronous reload helper
- BUG/MEDIUM: acme: free() of i2d_X509_REQ() with AWS-LC
- ADMIN: reload: introduce verbose and silent mode
- ADMIN: reload: introduce -vv mode
- MINOR: mt_list: Implement MT_LIST_POP_LOCKED()
- BUG/MEDIUM: stick-tables: Make sure not to free a pending entry
- MINOR: sched: let's permit to share the local ctx between threads
- MINOR: sched: pass the thread number to is_sched_alive()
- BUG/MEDIUM: wdt: improve stuck task detection accuracy
- MINOR: ssl: add the ssl_bc_sni sample fetch function to retrieve backend SNI
- MINOR: rawsock: introduce CO_RFL_TRY_HARDER to detect closures on complete reads
- MEDIUM: ssl: don't always process pending handshakes on closed connections
- MEDIUM: servers: Schedule the server requeue target on creation
- MEDIUM: fwlc: Make it so fwlc_srv_reposition works with unqueued srv
- BUG/MEDIUM: fwlc: Handle memory allocation failures.
- DOC: config: clarify some known limitations of the json_query() converter
- BUG/CRITICAL: mjson: fix possible DoS when parsing numbers
- BUG/MINOR: h2: forbid 'Z' as well in header field names checks
- BUG/MINOR: h3: forbid 'Z' as well in header field names checks
- BUG/MEDIUM: resolvers: break an infinite loop in resolv_get_ip_from_response()
Oula Kivalo reported that different JSON libraries may process duplicate
keys differently and that most JSON libraries usually decode the stream
before extracting keys, while the current mjson implementation decodes the
contents during extraction instead. Let's document this point so that
users are aware of the limitations and do not rely on the current behavior
and do not use it for what it's not made for (e.g. content sanitization).
This is also the case for jwt_header_query(), jwt_payload_query() and
jwt_verify(), which already refer to this converter for specificities.
Sometimes in order to debug certain difficult situations it can be useful
to know what SNI was configured on a connection going to a server, for
example to match it against what the server saw or to detect cases where
a server would route on SNI instead of Host. This sample fetch function
simply retrieves the SNI configured on the backend connection, if any.
Implement MT_LIST_POP_LOCKED(), that behaves as MT_LIST_POP() and
removes the first element from the list, if any, but keeps it locked.
This should be backported to 3.2, as it will be use in a bug fix in the
stick tables that affects 3.2 too.
There is currently an srv_queue converter which is capable of taking the
output of a dynamic name and determining the queue length for a given
server. In addition there is a sample fetcher for whether a server is
currently up. This simply combines the two such that srv_is_up can be
used as a converter too.
Future work might extend this to other sample fetchers for servers, but
this is probably the most useful for acl routing.
In preparation of providing further server converters, split the code
for finding the server from the sample out.
Additionally, update the documentation for srv_queue converter to note
security concerns.
It is possible on at least Linux and FreeBSD to set the congestion control
algorithm to be used with outgoing connections, among the list of supported
and permitted ones. Let's expose this setting with "cc". Unknown or
forbidden algorithms will be ignored and the default one will continue to
be used.
It is possible on at least Linux and FreeBSD to set the congestion control
algorithm to be used with incoming connections, among the list of supported
and permitted ones. Let's expose this setting with "cc". Permission issues
might be reported (as warnings).
Add some documentation about shm stats file structure to help writing
tools that can parse the file to use the shared stats counters.
This file was written for shm stats file version 1.0 specifically,
it may need to be updated when the shm stats file structure changes
in the future.
This change adds the PP2_SUBTYPE_SSL_GROUP and PP2_SUBTYPE_SSL_SIG_SCHEME
code point reservations in proxy_protocol.txt. The motivation for adding
these two TLVs is for backend visibility into the negotiated TLS key
exchange group and handshake signature scheme.
Demand for visibility is expected to increase as endpoints migrate to use
new Post-Quantum resistant algorithms for key exchange and signatures.
This patch extends the documentation for "limited-quic" global keyword.
It mentions first that it relies on USE_QUIC_OPENSSL_COMPAT=1 build
option.
Compatibility with TLS libraries is now clearly exposed. In particular,
it highlights the fact that it is mostly targetted at OpenSSL version
prior to 3.5.2, and that it should be disabled if a recent OpenSSL
release is available. It also states that limited-quic does nothing if
USE_QUIC_OPENSSL_COMPAT is not set during compilation.
Historically, when the purge of pools was forced by sending a SIGQUIT to
haproxy, information about the pools were first dumped. It is now totally
pointless because these info can be retrieved via the CLI. It is even less
relevant now because the purge is forced typically when there are memroy
issues and to dump pools information, data must be allocated.
dump_pools_info() function was simplified because it is now called only from
an applet. No reason to still try to dump info on stderr.
Similarly to the automic SNI selection for regulat SSL traffic, the SNI of
health-checks HTTPS connection is now automatically set by default by using
the host header value. "check-sni-auto" and "no-check-sni-auto" server
settings were added to change this behavior.
Only implicit HTTPS health-checks can take advantage of this feature. In
this case, the host header value from the "option httpchk" directive is used
to extract the SNI. It is disabled if http-check rules are used. So, the SNI
must still be explicitly specified via a "http-check connect" rule.
This patch with should paritally fix the issue #3081.
For HTTPS outgoing connections, the SNI is now automatically set using the
Host header value if no other value is already set (via the "sni" server
keyword). It is now the default behavior. It could be disabled with the
"no-sni-auto" server keyword. And eventually "sni-auto" server keyword may
be used to reset any previous "no-sni-auto" setting. This option can be
inherited from "default-server" settings. Finally, if no connection name is
set via "pool-conn-name" setting, the selected value is used.
The automatic selection of the SNI is enabled by default for all outgoing
connections. But it is concretely used for HTTPS connections only. The
expression used is "req.hdr(host),host_only".
This patch should paritally fix the issue #3081. It only covers the server
part. Another patch will add the feature for HTTP health-checks.
Released version 3.3-dev8 with the following main changes :
- BUG/MEDIUM: mux-h2: fix crash on idle-ping due to unwanted ABORT_NOW
- BUG/MINOR: quic-be: missing Initial packet number space discarding
- BUG/MEDIUM: quic-be: crash after backend CID allocation failures
- BUG/MEDIUM: ssl: apply ssl-f-use on every "ssl" bind
- BUG/MAJOR: stream: Remove READ/WRITE events on channels after analysers eval
- MINOR: dns: dns_connect_nameserver: fix fd leak at error path
- BUG/MEDIUM: quic: reset padding when building GSO datagrams
- BUG/MINOR: quic: do not emit probe data if CONNECTION_CLOSE requested
- BUG/MAJOR: quic: fix INITIAL padding with probing packet only
- BUG/MINOR: quic: don't coalesce probing and ACK packet of same type
- MINOR: quic: centralize padding for HP sampling on packet building
- MINOR: http_ana: fix typo in http_res_get_intercept_rule
- BUG/MEDIUM: http_ana: handle yield for "stats http-request" evaluation
- MINOR: applet: Rely on applet flag to detect the new api
- MINOR: applet: Add function to test applet flags from the appctx
- MINOR: applet: Add a flag to know an applet is using HTX buffers
- MINOR: applet: Make some applet functions HTX aware
- MEDIUM: applet: Set .rcv_buf and .snd_buf functions on default ones if not set
- BUG/MEDIUM: mux-spop: Reject connection attempts from a non-spop frontend
- REGTESTS: jwt: create dynamically "cert.ecdsa.pem"
- BUG/MEDIUM: spoe: Improve error detection in SPOE applet on client abort
- MINOR: haproxy: abort config parsing on fatal errors for post parsing hooks
- MEDIUM: server: split srv_init() in srv_preinit() + srv_postinit()
- MINOR: proxy: handle shared listener counters preparation from proxy_postcheck()
- DOC: configuration: reword 'generate-certificates'
- BUG/MEDIUM: quic-be: avoid crashes when releasing Initial pktns
- BUG/MINOR: quic: reorder fragmented RX CRYPTO frames by their offsets
- MINOR: ssl: diagnostic warning when both 'default-crt' and 'strict-sni' are used
- MEDIUM: ssl: convert diag to warning for strict-sni + default-crt
- DOC: configuration: clarify 'default-crt' and implicit default certificates
- MINOR: quic: remove ->offset qf_crypto struct field
- BUG/MINOR: mux-quic: trace with non initialized qcc
- BUG/MINOR: acl: set arg_list->kw to aclkw->kw string literal if aclkw is found
- BUG/MEDIUM: mworker: fix startup and reload on macOS
- BUG/MINOR: connection: rearrange union list members
- BUG/MINOR: connection: remove extra session_unown_conn() on reverse
- MINOR: cli: display failure reason on wait command
- BUG/MINOR: server: decrement session idle_conns on del server
- BUG/MINOR: mux-quic: do not access conn after idle list insert
- MINOR: session: document explicitely that session_add_conn() is safe
- MINOR: session: uninline functions related to BE conns management
- MINOR: session: refactor alloc/lookup of sess_conns elements
- MEDIUM: session: protect sess conns list by idle_conns_lock
- MINOR: server: shard by thread sess_conns member
- MEDIUM: server: close new idle conns if server in maintenance
- MEDIUM: session: close new idle conns if server in maintenance
- MINOR: server: cleanup idle conns for server in maint already stopped
- MINOR: muxes: enforce thread-safety for private idle conns
- MEDIUM: conn/muxes/ssl: reinsert BE priv conn into sess on IO completion
- MEDIUM: conn/muxes/ssl: remove BE priv idle conn from sess on IO
- MEDIUM: mux-quic: enforce thread-safety of backend idle conns
- MAJOR: server: implement purging of private idle connections
- MEDIUM: session: account on server idle conns attached to session
- MAJOR: server: do not remove idle conns in del server
- BUILD: mworker: fix ignoring return value of ‘read’
- DOC: unreliable sockpair@ on macOS
- MINOR: muxes: adjust takeover with buf_wait interaction
- OPTIM: backend: set release on takeover for strict maxconn
- DOC: configuration: confuse "strict-mode" with "zero-warning"
- MINOR: doc: add missing statistics column
- MINOR: doc: add missing statistics column
- MINOR: stats: display new curr_sess_idle_conns server counter
- MINOR: proxy: extend "show servers conn" output
- MEDIUM: proxy: Reject some header names for 'http-send-name-header' directive
- BUG/BUILD: stats: fix build due to missing stat enum definition
- DOC: proxy-protocol: Make example for PP2_SUBTYPE_SSL_SIG_ALG accurate
- CLEANUP: quic: remove a useless CRYPTO frame variable assignment
- BUG/MEDIUM: quic: CRYPTO frame freeing without eb_delete()
- BUG/MAJOR: mux-quic: fix crash on reload during emission
- MINOR: conn/muxes/ssl: add ASSUME_NONNULL() prior to _srv_add_idle
- REG-TESTS: map_redirect: Don't use hdr_dom in ACLs with "-m end" matching method
- MINOR: acl: Only allow one '-m' matching method
- MINOR: acl; Warn when matching method based on a suffix is overwritten
- BUG/MEDIUM: server: Duplicate healthcheck's alpn inherited from default server
- BUG/MINOR: server: Duplicate healthcheck's sni inherited from default server
- BUG/MINOR: acl: Properly detect overwritten matching method
- BUG/MINOR: halog: Add OOM checks for calloc() in filter_count_srv_status() and filter_count_url()
- BUG/MINOR: log: Add OOM checks for calloc() and malloc() in logformat parser and dup_logger()
- BUG/MINOR: acl: Add OOM check for calloc() in smp_fetch_acl_parse()
- BUG/MINOR: cfgparse: Add OOM check for calloc() in cfg_parse_listen()
- BUG/MINOR: compression: Add OOM check for calloc() in parse_compression_options()
- BUG/MINOR: tools: Add OOM check for malloc() in indent_msg()
- BUG/MINOR: quic: ignore AGAIN ncbuf err when parsing CRYPTO frames
- MINOR: quic/flags: complete missing flags
- BUG/MINOR: quic: fix room check if padding requested
- BUG/MINOR: quic: fix padding issue on INITIAL retransmit
- BUG/MINOR: quic: pad Initial pkt with CONNECTION_CLOSE on client
- MEDIUM: quic: strengthen BUG_ON() for unpad Initial packet on client
- DOC: configuration: rework the jwt_verify keyword documentation
- BUG/MINOR: haproxy: be sure not to quit too early on soft stop
- BUILD: acl: silence a possible null deref warning in parse_acl_expr()
- MINOR: quic: Add more information about RX packets
- CI: fix syntax of Quic Interop pipelines
- MEDIUM: cfgparse: warn when using user/group when built statically
- BUG/MEDIUM: stick-tables: don't leave the expire loop with elements deleted
- BUG/MINOR: stick-tables: never leave used entries without expiration
- BUG/MEDIUM: peers: don't fail twice to grab the update lock
- MINOR: stick-tables: limit the number of visited nodes during expiration
- OPTIM: stick-tables: exit expiry faster when the update lock is held
- MINOR: counters: retrieve detailed errmsg upon failure with counters_{fe,be}_shared_prepare()
- MINOR: stats-file: introduce shm-stats-file directive
- MEDIUM: stats-file: processes share the same clock source from shm-stats-file
- MINOR: stats-file: add process slot management for shm stats file
- MEDIUM: stats-file/counters: store and preload stats counters as shm file objects
- DOC: config: document "shm-stats-file" directive
- OPTIM: stats-file: don't unnecessarily die hard on shm_stats_file_reuse_object()
- MINOR: compiler: add ALWAYS_PAD() macro
- BUILD: stats-file: fix aligment issues
- MINOR: stats-file: reserve some bytes in exported structs
- MEDIUM: stats-file: add some BUG_ON() guards to ensure exported structs are not changed by accident
- BUG/MINOR: check: ensure check-reuse is compatible with SSL
- BUG/MINOR: check: fix dst address when reusing a connection
- REGTESTS: explicitly use "balance roundrobin" where RR is needed
- MAJOR: backend: switch the default balancing algo to "random"
- BUG/MEDIUM: conn: fix UAF on connection after reversal on edge
- BUG/MINOR: connection: streamline conn detach from lists
- BUG/MEDIUM: quic-be: too early SSL_SESSION initialization
- BUG/MINOR: log: fix potential memory leak upon error in add_to_logformat_list()
- MEDIUM: init: always warn when running as root without being asked to
- MINOR: sample: Add base2 converter
- MINOR: version: add -vq, -vqb, and -vqs flags for concise version output
- BUILD: trace: silence a bogus build warning at -Og
- MINOR: trace: accept trace spec right after "-dt" on the command line
- BUILD: makefile: bump the default minimum linux version to 4.17
As explained during the 3.3-dev7 announcement below:
https://www.mail-archive.com/haproxy@formilux.org/msg46073.html
no regularly maintained distro supports a kernel older than 4.18 anymore,
and KTLS is supported since 4.17. So it's about the right moment to bump
the default minimum kernel version supported by glibc and musl to
automatically cover new features. The linux-glibc-legacy target still
supports 2.6.28 and above.
This commit adds the base2 converter to turn binary input into it's
string representation. Each input byte is converted into a series of
eight characters which are either 0s and 1s by bit-wise comparison.
For many years, an unset load balancing algorithm would use "roundrobin".
It was shown several times that "random" with at least 2 draws (the
default) generally provides better performance and fairness in that
it will automatically adapt to the server's load and capacity. This
was further described with numbers in this discussion:
https://www.mail-archive.com/haproxy@formilux.org/msg46011.htmlhttps://github.com/orgs/haproxy/discussions/3042
BTW there were no objection and only support for the change.
The goal of this patch is to change the default algo when none is
specified, from "roundrobin" to "random". This way, users who don't
care and don't set the load balancing algorithm will benefit from a
better one in most cases, while those who have good reasons to prefer
roundrobin (for session affinity or for reproducible sequences like used
in regtests) can continue to specify it.
The vast majority of users should not notice a difference.
Add some documentation for "shm-stats-file" and
"shm-stats-file-max-objects" experimental directives related to the use
of shared memory for storing stats counters (see previous commits for
implementation details)
Split the documentation in multiple sections:
- Explanation about what it does and how
- <alg> parameter with array of parameters
- <key> parameter with details about certificates and public keys
- Return value
Others changes:
- certificates does not need to be known during configuration parsing
- differences between public key and certificate
From time to time, issues are reported about string matching based on suffix
(for instance path_beg). Each time, it appears these ACLs are used in
conjunction with a converter or followed by an explicit matching method
(-m).
Unfortunatly, it is not an issue but an expected behavior, while it is not
obvious. matching suffixes can be consider as aliases on the corresponding
'-m' matching method. Thus "path_beg" is equivalent to "path -m beg". When a
converter is used the original matching (string) is used and the suffix is
lost. When followed by an explicit matching method, it overwrites the
matching method based on the suffix.
It is expected but confusing. Thus now a warning is emitted because it is a
configuration issue for sure. Following sample fetch functions are concerned:
* base
* path
* req.cook
* req.hdr
* res.hdr
* url
* urlp
The configuration manual was modified to make it less ambiguous.
The docs call out that this field is the algorithm used to
sign the certificate. However, the example only had the hash portion of
the signature algorithm. This change updates the example to be accurate
based on a value written by HAProxy, which is based on an OID for
signature algorithms. I based example on a real TLV written by
HAProxy on my machine with all SSL TLVs enabled in config.
From time to time, we saw the 'http-send-name-header' directive used to
overwrite the Host header to workaround limitations of a buggy application.
Most of time, this led to troubles. This was never officially supported and
each time we strongly discouraged anyone to do so. We already thought to
deprecate this directive, but it seems to be still used by few people. So
for now, we decided to strengthen the tests performed on it.
The header name is now checked during the configuration parsing to forbid
some risky names. 'Host', 'Content-Length', 'Transfer-Encoding' and
'Connection' header names are now rejected. But more headers could be added
in future.
CLI command "show servers conn" is used as a debugging tool to monitor
the number of connections per server. This patch extends its output by
adding the content of two server counters.
<served> is the first added column. It represents the number of active
streams on a server. <curr_sess_idle_conns> is the second added column.
This is a recently added value which account private idle connections
referencing a server.
Add a new stats column in proxy stats to display server counter for
private idle connections. This counter has been introduced recently.
The value is displayed on CSV output on the last column before modules.
It is also displayed on HTLM page alongside other idle server counters.
4b10302fd8 ("MINOR: cfgparse: implement a simple if/elif/else/endif
macro block handler") introduces a confusion between "strict-mode" and
"zero-warning".
This patch fixes the issue by changing "strict-mode" by "zero-warning"
in section 2.4. Conditional blocks.
Must be backported as far as 2.4.
We discovered that the sockpair@ protocol is unreliable in macOS, this
is the same problem that we fixed in d7f6819. But it's not possible to
implement a acknowledgment once the socket are in non-blocking mode.
The problem was discovered in issue #3045.
Must be backported in every stable versions.
Do not remove anymore idle and purgeable connections directly under the
"del server" handler. The main objective of this patch is to reduce the
amount of work performed under thread isolation. This should improve
"del server" scheduling with other haproxy tasks.
Another objective is to be able to properly support dynamic servers with
QUIC. Indeed, takeover is not yet implemented for this protocol, hence
it is not possible to rely on cleanup of idle connections performed by a
single thread under "del server" handler.
With this change it is not possible anymore to remove a server if there
is still idle connections referencing it. To ensure this cannot be
performed, srv_check_for_deletion() has been extended to check server
counters for idle and idle private connections.
Server deletion should still remain a viable procedure, as first it is
mandatory to put the targetted server into maintenance. This step forces
the cleanup of its existing idle connections. Thanks to a recent change,
all finishing connections are also removed immediately instead of
becoming idle. In short, this patch transforms idle connections removal
from a synchronous to an asynchronous procedure. However, this should
remain a steadfast and quick method achievable in less than a second.
This patch is considered major as some users may notice this change when
removing a server. In particular with the following CLI commands
pipeline:
"disable server <X>; shutdown sessions server <X>; del server <X>"
Server deletion will now probably fail, as idle connections purge cannot
be completed immediately. Thus, it is now highly advise to always use a
small delay "wait srv-removable" before "del server" to ensure that idle
connections purge is executed prior.
Along with this change, documentation for "del server" and related
"shutdown sessions server" has been refined, in particular to better
highlight under what conditions a server can be removed.
This patch introduces a change of behavior in the configuration parsing.
Previously the "ssl-f-use" lines were only applied on "ssl" bind lines
that does not have any "crt" configured.
Since there is no warning and you could mix bind lines with and without
crt, this is really confusing.
This patch applies the "ssl-f-use" lines on every "ssl" bind lines.
This was discussed in ticket #3082.
Must be backported in 3.2.
Released version 3.3-dev7 with the following main changes :
- MINOR: quic: duplicate GSO unsupp status from listener to conn
- MINOR: quic: define QUIC_FL_CONN_IS_BACK flag
- MINOR: quic: prefer qc_is_back() usage over qc->target
- BUG/MINOR: cfgparse: immediately stop after hard error in srv_init()
- BUG/MINOR: cfgparse-listen: update err_code for fatal error on proxy directive
- BUG/MINOR: proxy: avoid NULL-deref in post_section_px_cleanup()
- MINOR: guid: add guid_get() helper
- MINOR: guid: add guid_count() function
- MINOR: clock: add clock_set_now_offset() helper
- MINOR: clock: add clock_get_now_offset() helper
- MINOR: init: add REGISTER_POST_DEINIT_MASTER() hook
- BUILD: restore USE_SHM_OPEN build option
- BUG/MINOR: stick-table: cap sticky counter idx with tune.nb_stk_ctr instead of MAX_SESS_STKCTR
- MINOR: sock: update broken accept4 detection for older hardwares.
- CI: vtest: add os name to OT cache key
- CI: vtest: add Ubuntu arm64 builds
- BUG/MEDIUM: ssl: Fix 0rtt to the server
- BUG/MEDIUM: ssl: fix build with AWS-LC
- MEDIUM: acme: use lowercase for challenge names in configuration
- BUG/MINOR: init: Initialize random seed earlier in the init process
- DOC: management: clarify usage of -V with -c
- MEDIUM: ssl/cli: relax crt insertion in crt-list of type directory
- MINOR: tools: implement ha_aligned_zalloc()
- CLEANUP: fd: make use of ha_aligned_alloc() for the fdtab
- MINOR: pools: distinguish the requested alignment from the type-specific one
- MINOR: pools: permit to optionally specify extra size and alignment
- MINOR: pools: always check that requested alignment matches the type's
- DOC: api: update the pools API with the alignment and typed declarations
- MEDIUM: tree-wide: replace most DECLARE_POOL with DECLARE_TYPED_POOL
- OPTIM: tasks: align task and tasklet pools to 64
- OPTIM: buffers: align the buffer pool to 64
- OPTIM: queue: align the pendconn pools to 64
- OPTIM: connection: align connection pools to 64
- OPTIM: server: start to use aligned allocs in server
- DOC: management: fix typo in commit f4f93c56
- DOC: config: recommend single quoting passwords
- MINOR: tools: also implement ha_aligned_alloc_typed()
- MEDIUM: server: introduce srv_alloc()/srv_free() to alloc/free a server
- MINOR: server: align server struct to 64 bytes
- MEDIUM: ring: always allocate properly aligned ring structures
- CI: Update to actions/checkout@v5
- MINOR: quic: implement qc_ssl_do_hanshake()
- BUG/MEDIUM: quic: listener connection stuck during handshakes (OpenSSL 3.5)
- BUG/MINOR: mux-h1: fix wrong lock label
- MEDIUM: dns: don't call connect to dest socket for AF_INET*
- BUG/MINOR: spoe: Properly detect and skip empty NOTIFY frames
- BUG/MEDIUM: cli: Report inbuf is no longer full when a line is consumed
- BUG/MEDIUM: quic: crash after quic_conn allocation failures
- BUG/MEDIUM: quic-be: do not initialize ->conn too early
- BUG/MEDIUM: mworker: more verbose error upon loading failure
- MINOR: xprt: Add recvmsg() and sendmsg() parameters to rcv_buf() and snd_buf().
- MINOR: ssl: Add a "flags" field to ssl_sock_ctx.
- MEDIUM: xprt: Add a "get_capability" method.
- MEDIUM: mux_h1/mux_pt: Use XPRT_CAN_SPLICE to decide if we should splice
- MINOR: cfgparse: Add a new "ktls" option to bind and server.
- MINOR: ssl: Define HAVE_VANILLA_OPENSSL if openssl is used.
- MINOR: build: Add a new option, USE_KTLS.
- MEDIUM: ssl: Add kTLS support for OpenSSL.
- MEDIUM: splice: Don't consider EINVAL to be a fatal error
- MEDIUM: ssl: Add splicing with SSL.
- MEDIUM: ssl: Add ktls support for AWS-LC.
- MEDIUM: ssl: Add support for ktls on TLS 1.3 with AWS-LC
- MEDIUM: ssl: Handle non-Application data record with AWS-LC
- MINOR: ssl: Add a way to globally disable ktls.
Add a new global option, "noktls", as well as a command line option,
"-dT", to totally disable ktls usage, even if it is activated on servers
or binds in the configuration.
That makes it easier to quickly figure out if a problem is related to
ktls or not.
Add a new "ktls" option to bind and server. Valid values are "on" and
"off".
It currently does nothing, but when kTLS will be implemented, it will
enable or disable kTLS for the corresponding sockets.
It is marked as experimental for now.
This one is a macro and will allocate a properly aligned and sized
object. This will help make sure that the alignment promised to the
compiler is respected.
When memstats is used, the type name is passed as a string into the
.extra field so that it can be displayed in "debug dev memstats". Two
tiny mistakes related to memstats macros were also fixed (calloc
instead of malloc for zalloc), and the doc was also added to document
how to use these calls.
In ticket #3065 an user complained that no success message is printed
anymore when using -c. The message does not appear by default since
version 2.9. This patch clarify the documentation.
Must be backported as far as 2.8.
Both the RFC and the IANA registry refers to challenge names in
lowercase. If we need to implement more challenges, it's better to
use the correct naming.
In order to keep the compatibility with the previous configurations, the
parsing does a strcasecmp() instead of a strcmp().
Also rename every occurence in the code and doc in lowercase.
This was discussed in issue #1864
Released version 3.3-dev6 with the following main changes :
- MINOR: acme: implement traces
- BUG/MINOR: hlua: take default-path into account with lua-load-per-thread
- CLEANUP: counters: rename counters_be_shared_init to counters_be_shared_prepare
- MINOR: clock: make global_now_ms a pointer
- MINOR: clock: make global_now_ns a pointer as well
- MINOR: mux-quic: release conn after shutdown on BE reuse failure
- MINOR: session: strengthen connection attach to session
- MINOR: session: remove redundant target argument from session_add_conn()
- MINOR: session: strengthen idle conn limit check
- MINOR: session: do not release conn in session_check_idle_conn()
- MINOR: session: streamline session_check_idle_conn() usage
- MINOR: muxes: refactor private connection detach
- BUG/MEDIUM: mux-quic: ensure Early-data header is set
- BUILD: acme: avoid declaring TRACE_SOURCE in acme-t.h
- MINOR: acme: emit a log for DNS-01 challenge response
- MINOR: acme: emit the DNS-01 challenge details on the dpapi sink
- MEDIUM: acme: allow to wait and restart the task for DNS-01
- MINOR: acme: update the log for DNS-01
- BUG/MINOR: acme: possible integer underflow in acme_txt_record()
- BUG/MEDIUM: hlua_fcn: ensure systematic watcher cleanup for server list iterator
- MINOR: sample: Add le2dec (little endian to decimal) sample fetch
- BUILD: fcgi: fix the struct name of fcgi_flt_ctx
- BUILD: compat: provide relaxed versions of the MIN/MAX macros
- BUILD: quic: use _MAX() to avoid build issues in pools declarations
- BUILD: compat: always set _POSIX_VERSION to ease comparisons
- MINOR: implement ha_aligned_alloc() to return aligned memory areas
- MINOR: pools: support creating a pool from a pool registration
- MINOR: pools: add a new flag to declare static registrations
- MINOR: pools: force the name at creation time to be a const.
- MEDIUM: pools: change the static pool creation to pass a registration
- DEBUG: pools: store the pool registration file name and line number
- DEBUG: pools: also retrieve file and line for direct callers of create_pool()
- MEDIUM: pools: add an alignment property
- MINOR: pools: add macros to register aligned pools
- MINOR: pools: add macros to declare pools based on a struct type
- MEDIUM: pools: respect pool alignment in allocations
This commit introduces a sample fetch, `le2dec`, to convert
little-endian binary input samples into their decimal representations.
The function converts the input into a string containing unsigned
integer numbers, with each number derived from a specified number of
input bytes. The numbers are separated using a user-defined separator.
This new sample is achieved by adding a parametrized sample_conv_2dec
function, unifying the logic for be2dec and le2dec converters.
Co-authored-by: Christian Norbert Menges <christian.norbert.menges@sap.com>
[wt: tracked as GH issue #2915]
Signed-off-by: Willy Tarreau <w@1wt.eu>
Released version 3.3-dev5 with the following main changes :
- BUG/MEDIUM: queue/stats: also use stream_set_srv_target() for pendconns
- DOC: list missing global QUIC settings
Complete list of global keywords with missing QUIC entries.
This could be backported to stable versions. This requires to take into
account the version of introduction for each keyword.
* limited-quic, introduced in 2.8
* no-quic, introduced in 2.8
* tune.quic.cc.cubic.min-losses, introduced in 3.1
Released version 3.3-dev4 with the following main changes :
- CLEANUP: server: do not check for duplicates anymore in findserver()
- REORG: server: move findserver() from proxy.c to server.c
- MINOR: server: use the tree to look up the server name in findserver()
- CLEANUP: server: rename server_find_by_name() to server_find()
- CLEANUP: server: rename findserver() to server_find_by_name()
- CLEANUP: server: use server_find_by_name() where relevant
- CLEANUP: cfgparse: lookup proxy ID using existing functions
- CLEANUP: stream: lookup server ID using standard functions
- CLEANUP: server: simplify server_find_by_id()
- CLEANUP: server: add server_find_by_addr()
- CLEANUP: stream: use server_find_by_addr() in sticking_rule_find_target()
- CLEANUP: server: be sure never to compare src against a non-existing defsrv
- MEDIUM: proxy: take the defsrv out of the struct proxy
- MINOR: proxy: add checks for defsrv's validity
- MEDIUM: proxy: no longer allocate the default-server entry by default
- MEDIUM: proxy: register a post-section cleanup function
- MINOR: debug: report haproxy and operating system info in panic dumps
- BUG/MEDIUM: h3: do not overwrite interim with final response
- BUG/MINOR: h3: properly realloc buffer after interim response encoding
- BUG/MINOR: h3: ensure that invalid status code are not encoded (FE side)
- MINOR: qmux: change API for snd_buf FIN transmission
- BUG/MEDIUM: h3: handle interim response properly on FE side
- BUG/MINOR: h3: properly handle interim response on BE side
- BUG/MINOR: quic: Wrong source address use on FreeBSD
- MINOR: h3: remove unused outbuf in h3_resp_headers_send()
- BUG/MINOR: applet: Don't trigger BUG_ON if the tid is not on appctx init
- DEV: gdb: add a memprofile decoder to the debug tools
- MINOR: quic: Get rid of qc_is_listener()
- DOC: connection: explain the rules for idle/safe/avail connections
- BUG/MEDIUM: quic-be: CC buffer released from wrong pool
- BUG/MINOR: halog: exit with error when some output filters are set simultaneosly
- MINOR: cpu-topo: split cpu_dump_topology() to show its summary in show dev
- MINOR: cpu-topo: write thread-cpu bindings into trash buffer
- MINOR: debug: align output style of debug_parse_cli_show_dev with cpu_dump_topology
- MINOR: debug: add thread-cpu bindings info in 'show dev' output
- MINOR: quic: Remove pool_head_quic_be_cc_buf pool
- BUILD: debug: add missed guard USE_CPU_AFFINITY to show cpu bindings
- BUG/MEDIUM: threads: Disable the workaround to load libgcc_s on macOS
- BUG/MINOR: logs: fix log-steps extra log origins selection
- BUG/MINOR: hq-interop: fix FIN transmission
- MINOR: ssl: Add ciphers in ssl traces
- MINOR: ssl: Add curve id to curve name table and mapping functions
- MINOR: ssl: Add curves in ssl traces
- MINOR: ssl: Dump ciphers and sigalgs details in trace with 'advanced' verbosity
- MINOR: ssl: Remove ClientHello specific traces if !HAVE_SSL_CLIENT_HELLO_CB
- MINOR: h3: use smallbuf for request header emission
- MINOR: h3: add traces to h3_req_headers_send()
- BUG/MINOR: h3: fix uninitialized value in h3_req_headers_send()
- MINOR: log: explicitly ignore "log-steps" on backends
- BUG/MEDIUM: acme: use POST-as-GET instead of GET for resources
- BUG/MINOR mux-quic: apply correctly timeout on output pending data
- BUG/MINOR: mux-quic: ensure close-spread-time is properly applied
- MINOR: mux-quic: refactor timeout code
- MINOR: mux-quic: correctly implement backend timeout
- MINOR: mux-quic: disable glitch on backend side
- MINOR: mux-quic: store session in QCS instance
- MEDIUM: mux-quic: implement be connection reuse
- MINOR: mux-quic: do not reuse connection if app already shut
- MEDIUM: mux-quic: support backend private connection
- MINOR: acme: remove acme_req_auth() and use acme_post_as_get() instead
- BUG/MINOR: acme: allow "processing" in challenge requests
- CLEANUP: acme: fix wrong spelling of "resources"
- CLEANUP: ssl: Use only NIDs in curve name to id table
- MINOR: acme: add ACME to the haproxy -vv feature list
- BUG/MINOR: hlua: Skip headers when a receive is performed on an HTTP applet
- BUG/MEDIUM: applet: State inbuf is no longer full if input data are skipped
- BUG/MEDIUM: stconn: Fix conditions to know an applet can get data from stream
- BUG/MINOR: applet: Fix applet_getword() to not return one extra byte
- BUG/MEDIUM: Remove sync sends from streams to applets
- MINOR: applet: Add HTX versions for applet_input_data() and applet_output_room()
- MINOR: applet: Improve applet API to take care of inbuf/outbuf alloc failures
- MEDIUM: hlua: Update the tcp applet to use its own buffers
- MINOR: hlua: Fill the request array on the first HTTP applet run
- MINOR: hlua: Use the buffer instead of the HTTP message to get HTTP headers
- MEDIUM: hlua: Update the http applet to use its own buffers
- BUG/MEDIUM: hlua: Report to SC when data were consumed on a lua socket
- BUG/MEDIUM: hlua: Report to SC when output data are blocked on a lua socket
- MEDIUM: hlua: Update the socket applet to use its own buffers
- BUG/MEDIUM: dns: Reset reconnect tempo when connection is finally established
- MEDIUM: dns: Update the dns_session applet to use its own buffers
- CLEANUP: http-client: Remove useless indentation when sending request body
- MINOR: http-client: Try to send request body with headers if possible
- MINOR: http-client: Trigger an error if first response block isn't a start-line
- BUG/MINOR: httpclient-cli: Don't try to dump raw headers in HTX mode
- MINOR: httpclient-cli: Reset httpclient HTX buffer instead of removing blocks
- MEDIUM: http-client: Update the http-client applet to use its own buffers
- MEDIUM: log: Update the log applet to use its own buffers
- MEDIUM: sink: Update the sink applets to use their own buffers
- MEDIUM: peers: Update the peer applet to use its own buffers
- MEDIUM: promex: Update the promex applet to use their own buffers
- MINOR: applet: Add support for flags on applets with a flag about the new API
- MEDIUM: applet: Emit a warning when a legacy applet is spawned
- BUG/MEDIUM: logs: fix sess_build_logline_orig() recursion with options
- MEDIUM: stats: avoid 1 indirection by storing the shared stats directly in counters struct
- CLEANUP: compiler: prefer char * over void * for pointer arithmetic
- CLEANUP: include: replace hand-rolled offsetof to avoid UB
- CLEANUP: peers: remove unused peer_session_target()
- OPTIM: stats: store fast sharded counters pointers at session and stream level
"log-steps" was already ignored if directly defined in a backend section,
however, when defined in a defaults section it was inherited to all
proxies no matter their capability (ie: including backends).
As configurations often contain more backends than frontends, this would
result in wasted memory given that the log-steps setting is only
considered on frontends.
Let's fix that by preventing the inheritance from defaults section to
anything else than frontends. Also adjust the documentation to mention
that the setting in not relevant for backends.
Released version 3.3-dev3 with the following main changes :
- BUG/MINOR: quic-be: Wrong retry_source_connection_id check
- MEDIUM: sink: change the sink mode type to PR_MODE_SYSLOG
- MEDIUM: server: move _srv_check_proxy_mode() checks from server init to finalize
- MINOR: server: move send-proxy* incompatibility check in _srv_check_proxy_mode()
- MINOR: mailers: warn if mailers are configured but not actually used
- BUG/MEDIUM: counters/server: fix server and proxy last_change mixup
- MEDIUM: server: add and use a separate last_change variable for internal use
- MEDIUM: proxy: add and use a separate last_change variable for internal use
- MINOR: counters: rename last_change counter to last_state_change
- MINOR: ssl: check TLS1.3 ciphersuites again in clienthello with recent AWS-LC
- BUG/MEDIUM: hlua: Forbid any L6/L7 sample fetche functions from lua services
- BUG/MEDIUM: mux-h2: Properly handle connection error during preface sending
- BUG/MINOR: jwt: Copy input and parameters in dedicated buffers in jwt_verify converter
- DOC: Fix 'jwt_verify' converter doc
- MINOR: jwt: Rename pkey to pubkey in jwt_cert_tree_entry struct
- MINOR: jwt: Remove unused parameter in convert_ecdsa_sig
- MAJOR: jwt: Allow certificate instead of public key in jwt_verify converter
- MINOR: ssl: Allow 'commit ssl cert' with no privkey
- MINOR: ssl: Prevent delete on certificate used by jwt_verify
- REGTESTS: jwt: Add test with actual certificate passed to jwt_verify
- REGTESTS: jwt: Test update of certificate used in jwt_verify
- DOC: 'jwt_verify' converter now supports certificates
- REGTESTS: restrict execution to a single thread group
- MINOR: ssl: Introduce new smp_client_hello_parse() function
- MEDIUM: stats: add persistent state to typed output format
- BUG/MINOR: httpclient: wrongly named httpproxy flag
- MINOR: ssl/ocsp: stop using the flags from the httpclient CLI
- MEDIUM: httpclient: split the CLI from the actual httpclient API
- MEDIUM: httpclient: implement a way to use directly htx data
- MINOR: httpclient/cli: add --htx option
- BUILD: dev/phash: remove the accidentally committed a.out file
- BUG/MINOR: ssl: crash in ssl_sock_io_cb() with SSL traces and idle connections
- BUILD/MEDIUM: deviceatlas: fix when installed in custom locations.
- DOC: deviceatlas build clarifications
- BUG/MINOR: ssl/ocsp: fix definition discrepancies with ocsp_update_init()
- MINOR: proto-tcp: Add support for TCP MD5 signature for listeners and servers
- BUILD: cfgparse-tcp: Add _GNU_SOURCE for TCP_MD5SIG_MAXKEYLEN
- BUG/MINOR: proto-tcp: Take care to initialized tcp_md5sig structure
- BUG/MINOR: http-act: Fix parsing of the expression argument for pause action
- MEDIUM: httpclient: add a Content-Length when the payload is known
- CLEANUP: ssl: Rename ssl_trace-t.h to ssl_trace.h
- MINOR: pattern: add a counter of added/freed patterns
- CI: set DEBUG_STRICT=2 for coverity scan
- CI: enable USE_QUIC=1 for OpenSSL versions >= 3.5.0
- CI: github: add an OpenSSL 3.5.0 job
- CI: github: update the stable CI to ubuntu-24.04
- BUG/MEDIUM: quic: SSL/TCP handshake failures with OpenSSL 3.5
- CI: github: update to OpenSSL 3.5.1
- BUG/MINOR: quic: Missing TLS 1.3 QUIC cipher suites and groups inits (OpenSSL 3.5 QUIC API)
- BUG/MINOR: quic-be: Malformed coalesced Initial packets
- MINOR: quic: Prevent QUIC backend use with the OpenSSL QUIC compatibility module (USE_OPENSS_COMPAT)
- MINOR: reg-tests: first QUIC+H3 reg tests (QUIC address validation)
- MINOR: quic-be: Set the backend alpn if not set by conf
- MINOR: quic-be: TLS version restriction to 1.3
- MINOR: cfgparse: enforce QUIC MUX compat on server line
- MINOR: server: support QUIC for dynamic servers
- CI: github: skip a ssl library version when latest is already in the list
- MEDIUM: resolvers: switch dns-accept-family to "auto" by default
- BUG/MINOR: resolvers: don't lower the case of binary DNS format
- MINOR: resolvers: do not duplicate the hostname_dn field
- MINOR: proto-tcp: Register a feature to report TCP MD5 signature support
- BUG/MINOR: listener: really assign distinct IDs to shards
- MINOR: quic: Prevent QUIC build with OpenSSL 3.5 new QUIC API version < 3.5.1
- BUG/MEDIUM: quic: Crash after QUIC server callbacks restoration (OpenSSL 3.5)
- REGTESTS: use two haproxy instances to distinguish the QUIC traces
- BUG/MEDIUM: http-client: Don't wake http-client applet if nothing was xferred
- BUG/MEDIUM: http-client: Properly inc input data when HTX blocks are xferred
- BUG/MEDIUM: http-client: Ask for more room when request data cannot be xferred
- BUG/MEDIUM: http-client: Test HTX_FL_EOM flag before commiting the HTX buffer
- BUG/MINOR: http-client: Ignore 1XX interim responses in non-HTX mode
- BUG/MINOR: http-client: Reject any 101-switching-protocols response
- BUG/MEDIUM: http-client: Drain the request if an early response is received
- BUG/MEDIUM: http-client: Notify applet has more data to deliver until the EOM
- BUG/MINOR: h3: fix https scheme request encoding for BE side
- MINOR: h1-htx: Add function to format an HTX message in its H1 representation
- BUG/MINOR: mux-h1: Use configured error files if possible for early H1 errors
- BUG/MINOR: h1-htx: Don't forget to init flags in h1_format_htx_msg function
- CLEANUP: assorted typo fixes in the code, commits and doc
- BUILD: adjust scripts/build-ssl.sh to modern CMake system of QuicTLS
- MINOR: debug: add distro name and version in postmortem
This patch adds the support for the RFC2385 (Protection of BGP Sessions via
the + TCP MD5 Signature Option) for the listeners and the servers. The
feature is only available on Linux. Keywords are not exposed otherwise.
By setting "tcp-md5sig <password>" option on a bind line, TCP segments of
all connections instantiated from the listening socket will be signed with a
16-byte MD5 digest. The same option can be set on a server line to protect
outgoing connections to the corresponding server.
The primary use case for this option is to allow BGP to protect itself
against the introduction of spoofed TCP segments into the connection
stream. But it can be useful for any very long-lived TCP connections.
A reg-test was added and it will be executed only on linux. All other
targets are excluded.
Use the new HTTPCLIENT_O_RES_HTX flag when using the CLI httpclient with
--htx.
It allows to process directly the response in HTX, then the htx_dump()
function is used to display a debug output.
Example:
echo "httpclient --htx GET https://haproxy.org" | socat /tmp/haproxy.sock
htx=0x79fd72a2e200(size=16336,data=139,used=6,wrap=NO,flags=0x00000010,extra=0,first=0,head=0,tail=5,tail_addr=139,head_addr=0,end_addr=0)
[0] type=HTX_BLK_RES_SL - size=31 - addr=0 HTTP/2.0 301
[1] type=HTX_BLK_HDR - size=15 - addr=31 content-length: 0
[2] type=HTX_BLK_HDR - size=32 - addr=46 location: https://www.haproxy.org/
[3] type=HTX_BLK_HDR - size=25 - addr=78 alt-svc: h3=":443"; ma=3600
[4] type=HTX_BLK_HDR - size=35 - addr=103 set-cookie: served=2:TLSv1.3+TCP:IPv4
[5] type=HTX_BLK_EOH - size=1 - addr=138 <empty>
Add a fourth character to the second column of the "typed output format"
to indicate whether the value results from a volatile or persistent metric
('V' or 'P' characters respectively). A persistent metric means the value
could possibily be preserved across reloads by leveraging a shared memory
between multiple co-processes. Such metrics are identified as "shared" in
the code (since they are possibly shared between multiple co-processes)
Some reg-tests were updated to take that change into account, also, some
outputs in the configuration manual were updated to reflect current
behavior.
Contrary to what the doc says, the jwt_verify converter only works with
a public key and not a full certificate for certificate based protocols
(everything but HMAC).
This patch should be backported up to 2.8.
Now that native mailers configuration is only usable with Lua mailers,
Willy noticed that we lack a way to warn the user if mailers were
previously configured on an older version but Lua mailers were not loaded,
which could trick the user into thinking mailers keep working when
transitionning to 3.2 while it is not.
In this patch we add the 'core.use_native_mailers_config()' Lua function
which should be called in Lua script body before making use of
'Proxy:get_mailers()' function to retrieve legacy mailers configuration
from haproxy main config. This way haproxy effectively knows that the
native mailers config is actually being used from Lua (which indicates
user correctly migrated from native mailers to Lua mailers), else if
mailers are configured but not used from Lua then haproxy warns the user
about the fact that they will be ignored unless they are used from Lua.
(e.g.: using the provided 'examples/lua/mailers.lua' to ease transition)
Released version 3.3-dev2 with the following main changes :
- BUG/MINOR: config/server: reject QUIC addresses
- MINOR: server: implement helper to identify QUIC servers
- MINOR: server: mark QUIC support as experimental
- MINOR: mux-quic-be: allow QUIC proto on backend side
- MINOR: quic-be: Correct Version Information transp. param encoding
- MINOR: quic-be: Version Information transport parameter check
- MINOR: quic-be: Call ->prepare_srv() callback at parsing time
- MINOR: quic-be: QUIC backend XPRT and transport parameters init during parsing
- MINOR: quic-be: QUIC server xprt already set when preparing their CTXs
- MINOR: quic-be: Add a function for the TLS context allocations
- MINOR: quic-be: Correct the QUIC protocol lookup
- MINOR: quic-be: ssl_sock contexts allocation and misc adaptations
- MINOR: quic-be: SSL sessions initializations
- MINOR: quic-be: Add a function to initialize the QUIC client transport parameters
- MINOR: sock: Add protocol and socket types parameters to sock_create_server_socket()
- MINOR: quic-be: ->connect() protocol callback adaptations
- MINOR: quic-be: QUIC connection allocation adaptation (qc_new_conn())
- MINOR: quic-be: xprt ->init() adapatations
- MINOR: quic-be: add field for max_udp_payload_size into quic_conn
- MINOR: quic-be: Do not redispatch the datagrams
- MINOR: quic-be: Datagrams and packet parsing support
- MINOR: quic-be: Handshake packet number space discarding
- MINOR: h3-be: Correctly retrieve h3 counters
- MINOR: quic-be: Store asap the DCID
- MINOR: quic-be: Build post handshake frames
- MINOR: quic-be: Add the conn object to the server SSL context
- MINOR: quic-be: Initial packet number space discarding.
- MINOR: quic-be: I/O handler switch adaptation
- MINOR: quic-be: Store the remote transport parameters asap
- MINOR: quic-be: Missing callbacks initializations (USE_QUIC_OPENSSL_COMPAT)
- MINOR: quic-be: Make the secret derivation works for QUIC backends (USE_QUIC_OPENSSL_COMPAT)
- MINOR: quic-be: SSL_get_peer_quic_transport_params() not defined by OpenSSL 3.5 QUIC API
- MINOR: quic-be: get rid of ->li quic_conn member
- MINOR: quic-be: Prevent the MUX to send/receive data
- MINOR: quic: define proper proto on QUIC servers
- MEDIUM: quic-be: initialize MUX on handshake completion
- BUG/MINOR: hlua: Don't forget the return statement after a hlua_yieldk()
- BUILD: hlua: Fix warnings about uninitialized variables
- BUILD: listener: fix 'for' loop inline variable declaration
- BUILD: hlua: Fix warnings about uninitialized variables (2)
- BUG/MEDIUM: mux-quic: adjust wakeup behavior
- MEDIUM: backend: delay MUX init with ALPN even if proto is forced
- MINOR: quic: mark ctrl layer as ready on quic_connect_server()
- MINOR: mux-quic: improve documentation for snd/rcv app-ops
- MINOR: mux-quic: define flag for backend side
- MINOR: mux-quic: set expect data only on frontend side
- MINOR: mux-quic: instantiate first stream on backend side
- MINOR: quic: wakeup backend MUX on handshake completed
- MINOR: hq-interop: decode response into HTX for backend side support
- MINOR: hq-interop: encode request from HTX for backend side support
- CLEANUP: quic-be: Add comments about qc_new_conn() usage
- BUG/MINOR: quic-be: CID double free upon qc_new_conn() failures
- MINOR: quic-be: Avoid SSL context unreachable code without USE_QUIC_OPENSSL_COMPAT
- BUG/MINOR: quic: prevent crash on startup with -dt
- MINOR: server: reject QUIC servers without explicit SSL
- BUG/MINOR: quic: work around NEW_TOKEN parsing error on backend side
- BUG/MINOR: http-ana: Properly handle keep-query redirect option if no QS
- BUG/MINOR: quic: don't restrict reception on backend privileged ports
- MINOR: hq-interop: handle HTX response forward if not enough space
- BUG/MINOR: quic: Fix OSSL_FUNC_SSL_QUIC_TLS_got_transport_params_fn callback (OpenSSL3.5)
- BUG/MINOR: quic: fix ODCID initialization on frontend side
- BUG/MEDIUM: cli: Don't consume data if outbuf is full or not available
- MINOR: cli: handle EOS/ERROR first
- BUG/MEDIUM: check: Set SOCKERR by default when a connection error is reported
- BUG/MINOR: mux-quic: check sc_attach_mux return value
- MINOR: h3: support basic HTX start-line conversion into HTTP/3 request
- MINOR: h3: encode request headers
- MINOR: h3: complete HTTP/3 request method encoding
- MINOR: h3: complete HTTP/3 request scheme encoding
- MINOR: h3: adjust path request encoding
- MINOR: h3: adjust auth request encoding or fallback to host
- MINOR: h3: prepare support for response parsing
- MINOR: h3: convert HTTP/3 response into HTX for backend side support
- MINOR: h3: complete response status transcoding
- MINOR: h3: transcode H3 response headers into HTX blocks
- MINOR: h3: use BUG_ON() on missing request start-line
- MINOR: h3: reject invalid :status in response
- DOC: config: prefer-last-server: add notes for non-deterministic algorithms
- CLEANUP: connection: remove unused mux-ops dedicated to QUIC
- BUG/MINOR: mux-quic/h3: properly handle too low peer fctl initial stream
- MINOR: mux-quic: support max bidi streams value set by the peer
- MINOR: mux-quic: abort conn if cannot create stream due to fctl
- MEDIUM: mux-quic: implement attach for new streams on backend side
- BUG/MAJOR: fwlc: Count an avoided server as unusable.
- MINOR: fwlc: Factorize code.
- BUG/MEDIUM: quic: do not release BE quic-conn prior to upper conn
- MAJOR: cfgparse: turn the same proxy name warning to an error
- MAJOR: cfgparse: make sure server names are unique within a backend
- BUG/MINOR: tools: only reset argument start upon new argument
- BUG/MINOR: stream: Avoid recursive evaluation for unique-id based on itself
- BUG/MINOR: log: Be able to use %ID alias at anytime of the stream's evaluation
- MINOR: hlua: emit a log instead of an alert for aborted actions due to unavailable yield
- MAJOR: mailers: remove native mailers support
- BUG/MEDIUM: ssl/clienthello: ECDSA with ssl-max-ver TLSv1.2 and no ECDSA ciphers
- DOC: configuration: add details on prefer-client-ciphers
- MINOR: ssl: Add "renegotiate" server option
- DOC: remove the program section from the documentation
- MAJOR: mworker: remove program section support
- BUG/MINOR: quic: wrong QUIC_FT_CONNECTION_CLOSE(0x1c) frame encoding
- MINOR: quic-be: add a "CC connection" backend TX buffer pool
- MINOR: quic: Useless TX buffer size reduction in closing state
- MINOR: quic-be: Allow sending 1200 bytes Initial datagrams
- MINOR: quic-be: address validation support implementation (RETRY)
- MEDIUM: proxy: deprecate the "transparent" and "option transparent" directives
- REGTESTS: update http_reuse_be_transparent with "transparent" deprecated
- REGTESTS: script: also add a line pointing to the log file
- DOC: config: explain how to deal with "transparent" deprecation
- MEDIUM: proxy: mark the "dispatch" directive as deprecated
- DOC: config: crt-list clarify default cert + cert-bundle
- MEDIUM: cpu-topo: switch to the "performance" cpu-policy by default
- SCRIPTS: drop the HTML generation from announce-release
- BUG/MINOR: tools: use my_unsetenv instead of unsetenv
- CLEANUP: startup: move comment about nbthread where it's more appropriate
- BUILD: qpack: fix a build issue on older compilers
As mentioned during the NUMA series development, the goal is to use
all available cores in the most efficient way by default, which
normally corresponds to "cpu-policy performance". The previous default
choice of "cpu-policy first-usable-node" was only meant to stay 100%
identical to before cpu-policy.
So let's switch the default cpu-policy to "performance" right now.
The doc was updated to reflect this.
Clarify that HAProxy duplicates crt-list entries for multi-cert bundles
which can create unexpected side-effects as only the very first
certificate after duplication is considered as default implicitly.
As mentioned in [1], the "dispatch" directive from haproxy 1.0 has long
outlived its original purpose and still suffers from a number of technical
limitations (no checks, no SSL, no idle connes etc) and still hinders some
internal evolutions. It's now time to mark it as deprecated, and to remove
it in 3.5 [2]. It was already recommended against in the documentation but
remained popular in raw TCP environments for being shorter to write.
The directive will now cause a warning to be emitted, suggesting an
alternate method involving "server". The warning can be shut using
"expose-deprecated-directives". The rare configs from 1.0 where
"dispatch" is combined with sticky servers using cookies will just
need to set these servers's weights to zero to prevent them from
being selected by the load balancing algorithm. All of this is
explained in the doc with examples.
Two reg tests were using this method, one purposely for this directive,
which now has expose-deprecated-directives, and another one to test the
behavior of idle connections, which was updated to use "server" and
extended to test both "http-reuse never" and "http-reuse always".
[1] https://github.com/orgs/haproxy/discussions/2921
[2] https://github.com/haproxy/wiki/wiki/Breaking-changes
The explanations for the "option transparent" keyword were a bit scarce
regarding deprecation, so let's explain how to replace it with a server
line that does the same.
As discussed here [1], "transparent" (already deprecated) and
"option transparent" are horrible hacks which should really disappear
in favor of "server xxx 0.0.0.0" which doesn't rely on hackish code
path. This old feature is now deprecated in 3.3 and will disappear in
3.5, as indicated here [2]. A warning is emitted when used, explaining
how to proceed, and how to silence the warning using the global
"expose-deprecated-directives" if needed. The doc was updated to
reflect this new state.
[1] https://github.com/orgs/haproxy/discussions/2921
[2] https://github.com/haproxy/wiki/wiki/Breaking-changes
This "renegotiate" option can be set on SSL backends to allow secure
renegotiation. It is mostly useful with SSL libraries that disable
secure regotiation by default (such as AWS-LC).
The "no-renegotiate" one can be used the other way around, to disable
secure renegotation that could be allowed by default.
Those two options can be set via "ssl-default-server-options" as well.
prefer-client-ciphers does not work exactly the same way when used with
a dual algorithm stack (ECDSA + RSA). This patch details its behavior.
This patch must be backported in every maintained version.
Problem was discovered in #2988.
As mentioned in 2.8 announce on the mailing list [1] and on the wiki [2]
native mailers were deprecated and planned for removal in 3.3. Now is
the time to drop the legacy code for native mailers which is based on a
tcpcheck "hack" and cannot be maintained. Lua mailers should be used as
a drop in replacement. Indeed, "mailers" and associated config directives
are preserved because mailers config is exposed to Lua, which helps smoothing
the transition from native mailers to Lua based ones.
As a reminder, to keep mailers configuration working as before without
making changes to the config file, simply add the line below to the global
section:
lua-load examples/lua/mailers.lua
mailers.lua script (provided in the git repository, adjust path as needed)
may be customized by users familiar with Lua, by default it emulates the
behavior of the native (now removed) mailers.
[1]: https://www.mail-archive.com/haproxy@formilux.org/msg43600.html
[2]: https://github.com/haproxy/wiki/wiki/Breaking-changes
There was already a check for this but there used to be an exception
that allowed duplicate server names only in case where their IDs were
explicit and different. This has been emitting a warning since 3.1 and
planned for removal in 3.3, so let's do it now. The doc was updated,
though it never mentioned this unicity constraint, so that was added.
Only the check for the exception was removed, the rest of the code
that is currently made to deal with duplicate server names was not
cleaned yet (e.g. the tree doesn't need to support dups anymore, and
this could be done at insertion time). This may be a subject for future
cleanups.
As warned since 3.1, it's no longer permitted to have a frontend and
a backend under the same name. This causes too many designation issues,
and causes trouble with stick-tables as well. Now each proxy name is
unique.
This commit only changes the check to return an error. Some code parts
currently exist to find the best candidates, these will be able to be
simplified as future cleanup patches. The doc was updated.
Add some notes which load-balancing algorithm can be considered as
deterministic or non-deterministic and add some examples for each type.
This was asked via mailing list to clarify the usage of
prefer-last-server option.
This can be backported to all stable versions.
Released version 3.3-dev1 with the following main changes :
- BUILD: tools: properly define ha_dump_backtrace() to avoid a build warning
- DOC: config: Fix a typo in 2.7 (Name format for maps and ACLs)
- REGTESTS: Do not use REQUIRE_VERSION for HAProxy 2.5+ (5)
- REGTESTS: Remove REQUIRE_VERSION=2.3 from all tests
- REGTESTS: Remove REQUIRE_VERSION=2.4 from all tests
- REGTESTS: Remove tests with REQUIRE_VERSION_BELOW=2.4
- REGTESTS: Remove support for REQUIRE_VERSION and REQUIRE_VERSION_BELOW
- MINOR: server: group postinit server tasks under _srv_postparse()
- MINOR: stats: add stat_col flags
- MINOR: stats: add ME_NEW_COMMON() helper
- MINOR: proxy: collect per-capability stat in proxy_cond_disable()
- MINOR: proxy: add a true list containing all proxies
- MINOR: log: only run postcheck_log_backend() checks on backend
- MEDIUM: proxy: use global proxy list for REGISTER_POST_PROXY_CHECK() hook
- MEDIUM: server: automatically add server to proxy list in new_server()
- MEDIUM: server: add and use srv_init() function
- BUG/MAJOR: leastconn: Protect tree_elt with the lbprm lock
- BUG/MEDIUM: check: Requeue healthchecks on I/O events to handle check timeout
- CLEANUP: applet: Update comment for applet_put* functions
- DEBUG: check: Add the healthcheck's expiration date in the trace messags
- BUG/MINOR: mux-spop: Fix null-pointer deref on SPOP stream allocation failure
- CLEANUP: sink: remove useless cleanup in sink_new_from_logger()
- MAJOR: counters: add shared counters base infrastructure
- MINOR: counters: add shared counters helpers to get and drop shared pointers
- MINOR: counters: add common struct and flags to {fe,be}_counters_shared
- MEDIUM: counters: manage shared counters using dedicated helpers
- CLEANUP: counters: merge some common counters between {fe,be}_counters_shared
- MINOR: counters: add local-only internal rates to compute some maxes
- MAJOR: counters: dispatch counters over thread groups
- BUG/MEDIUM: cli: Properly parse empty lines and avoid crashed
- BUG/MINOR: config: emit warning for empty args only in discovery mode
- BUG/MINOR: config: fix arg number reported on empty arg warning
- BUG/MINOR: quic: Missing SSL session object freeing
- MINOR: applet: Add API functions to manipulate input and output buffers
- MINOR: applet: Add API functions to get data from the input buffer
- CLEANUP: applet: Simplify a bit comments for applet_put* functions
- MEDIUM: hlua: Update TCP applet functions to use the new applet API
- BUG/MEDIUM: fd: Use the provided tgid in fd_insert() to get tgroup_info
- BUG/MINIR: h1: Fix doc of 'accept-unsafe-...-request' about URI parsing
The description of tests performed on the URI in H1 when
'accept-unsafe-violations-in-http-request' option is wrong. It states that
only characters below 32 and 127 are blocked when this option is set,
suggesting that otherwise, when it is not set, all invalid characters in the
URI, according to the RFC3986, are blocked.
But in fact, it is not true. By default all character below 32 and above 127
are blocked. And when 'accept-unsafe-violations-in-http-request' option is
set, characters above 127 (excluded) are accepted. But characters in
(33..126) are never checked, independently of this option.
This patch should fix the issue #2906. It should be backported as far as
3.0. For older versions, the docuementation could also be clarified because
this part is not really clear.
Note the request URI validation is still under discution because invalid
characters in (33.126) are never checked and some users request a stricter
parsing.
Released version 3.2.0 with the following main changes :
- MINOR: promex: Add agent check status/code/duration metrics
- MINOR: ssl: support strict-sni in ssl-default-bind-options
- MINOR: ssl: also provide the "tls-tickets" bind option
- MINOR: server: define CLI I/O handler for "add server"
- MINOR: server: implement "add server help"
- MINOR: server: use stress mode for "add server help"
- BUG/MEDIUM: server: fix crash after duplicate GUID insertion
- BUG/MEDIUM: server: fix potential null-deref after previous fix
- MINOR: config: list recently added sections with -dKcfg
- BUG/MAJOR: cache: Crash because of wrong cache entry deleted
- DOC: configuration: fix the example in crt-store
- DOC: config: clarify the wording around single/double quotes
- DOC: config: clarify the legacy cookie and header captures
- DOC: config: fix alphabetical ordering of layer 7 sample fetch functions
- DOC: config: fix alphabetical ordering of layer 6 sample fetch functions
- DOC: config: fix alphabetical ordering of layer 5 sample fetch functions
- DOC: config: fix alphabetical ordering of layer 4 sample fetch functions
- DOC: config: fix alphabetical ordering of internal sample fetch functions
- BUG/MINOR: h3: Set HTX flags corresponding to the scheme found in the request
- BUG/MEDIUM: h3: Declare absolute URI as normalized when a :authority is found
- DOC: config: mention in bytes_in and bytes_out that they're read on input
- DOC: config: clarify the basics of ACLs (call point, multi-valued etc)
- REGTESTS: Make the script testing conditional set-var compatible with Vtest2
- REGTESTS: Explicitly allow failing shell commands in some scripts
- MINOR: listeners: Add support for a label on bind line
- BUG/MEDIUM: cli/ring: Properly handle shutdown in "show event" I/O handler
- BUG/MEDIUM: hlua: Properly detect shudowns for TCP applets based on the new API
- BUG/MEDIUM: hlua: Fix getline() for TCP applets to work with applet's buffers
- BUG/MEDIUM: hlua: Fix receive API for TCP applets to properly handle shutdowns
- CI: vtest: Rely on VTest2 to run regression tests
- CI: vtest: Fix the build script to properly work on MaOS
- CI: combine AWS-LC and AWS-LC-FIPS by template
- BUG/MEDIUM: httpclient: Throw an error if an lua httpclient instance is reused
- DOC: hlua: Add a note to warn user about httpclient object reuse
- DOC: hlua: fix a few typos in HTTPMessage.set_body_len() documentation
- DEV: patchbot: prepare for new version 3.3-dev
- MINOR: version: mention that it's 3.2 LTS now.
A few typos were noticed while gathering info for the 3.2 announce
messages, this fixes them, and will probably constitute the last
commit of this release. There's no need to backport it unless commit
94055a5e7 ("MEDIUM: hlua: Add function to change the body length of
an HTTP Message") is backported.
It is not supported to reuse an lua httpclient instance to process several
requests. A new object must be created for each request. Thanks to the
previous patch ("BUG/MEDIUM: httpclient: Throw an error if an lua httpclient
instance is reused"), an error is now reported if this happens. But it is
not obvious for users. So the lua-api docuementation was updated accordingly.
This patch is related to issue #2986. It should be backported with the
commit above.
An optional timeout was added to AppletTCP.receive() to interrupt calls after a
delay. It was mandatory to be able to implement interactive applets (like
trisdemo). However, this broke the API and it made impossible to differentiate
the shutdowns from the delays expirations. Indeed, in both cases, an empty
string was returned.
Because historically an empty string was used to notify a connection shutdown,
it should not be changed. So now, 'nil' value is returned when no data was
available before the delay expiration.
The new AppletTCP:try_receive() function was also affected. To fix it, instead
of stating there is no delay when a receive is tried, an expired delay is
set. Concretely TICK_ETERNITY was replaced by now_ms.
Finally, AppletTCP:getline() function is not concerned for now because there
is no way to interrupt it after some delay.
The documentation and trisdemo lua script were updated accordingly.
This patch depends on "BUG/MEDIUM: hlua: Properly detect shudowns for TCP
applets based on the new API". However, it is a 3.2-specific issue, so no
backport is needed.
It is now possile to set a label on a bind line. All sockets attached to
this bind line inherits from this label. The idea is to be able to groud of
sockets. For now, there is no mechanism to create these groups, this must be
done by hand.
This is essentially in order to address the concerns expressed in
issue #2226 where it is mentioned that the moment they are called is
not clear enough. Admittedly, re-reading the paragraph doesn't make
it obvious on a quick read that they behave like functions. This patch
adds an extra paragraph that makes the parallel with programming
languages' boolean functions and explains the fact that they can be
multi-valued. Hoping this is clearer now.
Issue #2267 suggests that it's unclear what exactly the byte counts mean
(particularly when compression is involved). Let's clarify that the counts
are read on data input and that they also cover headers and a bit of
internal overhead.
As reported in issue #2195, cookie captures and header captures are no
longer the recommended way to proceed. Let's mention that this is the
legacy way and provide a few pointers to the recommended functions and
actions to use the modern methods.
As reported in issue #2327, the wording used in the section about quoting
can be read two ways due to the use of the two types of quotes to protect
each other quote. Better only use the quoting without mixing the two when
mentioning them.
Fix a bad example in the crt-store section. site1 does not use the "web"
crt-store but the global one.
Must be backported as far as 3.0 however the section was 3.12 in
previous version.
Implement "help" as a sub-command for "add server" CLI. The objective is
to list all the keywords that are supported for dynamic servers. CLI IO
handler and add_srv_ctx are used to support reentrancy on full output
buffer.
Now that this command is implemented, the outdated keyword list on "add
server" from management documentation can be removed.
Currently there is "no-tls-tickets" that is also supported in the
ssl-default-bind-options directive, but there's no way to re-enable
them on a specific "bind" line. This patch simply provides the option
to re-enable them. Note that the flag is inverted because tickets are
enabled by default and the no-tls-ticket option sets the flag to
disable them.
Several users already reported that it would be nice to support
strict-sni in ssl-default-bind-options. However, in order to support
it, we also need an option to disable it.
This patch moves the setting of the option from the strict_sni field
to a flag in the ssl_options field so that it can be inherited from
the default bind options, and adds a new "no-strict-sni" directive to
allow to disable it on a specific "bind" line.
The test file "del_ssl_crt-list.vtc" which already tests both options
was updated to make use of the default option and the no- variant to
confirm everything continues to work.
Released version 3.2-dev17 with the following main changes :
- DOC: configuration: explicit multi-choice on bind shards option
- BUG/MINOR: sink: detect and warn when using "send-proxy" options with ring servers
- BUG/MEDIUM: peers: also limit the number of incoming updates
- MEDIUM: hlua: Add function to change the body length of an HTTP Message
- BUG/MEDIUM: stconn: Disable 0-copy forwarding for filters altering the payload
- BUG/MINOR: h3: don't insert more than one Host header
- BUG/MEDIUM: h1/h2/h3: reject forbidden chars in the Host header field
- DOC: config: properly index "table and "stick-table" in their section
- DOC: management: change reference to configuration manual
- BUILD: debug: mark ha_crash_now() as attribute(noreturn)
- IMPORT: slz: avoid multiple shifts on 64-bits
- IMPORT: slz: support crc32c for lookup hash on sse4 but only if requested
- IMPORT: slz: use a better hash for machines with a fast multiply
- IMPORT: slz: fix header used for empty zlib message
- IMPORT: slz: silence a build warning on non-x86 non-arm
- BUG/MAJOR: leastconn: do not loop forever when facing saturated servers
- BUG/MAJOR: queue: properly keep count of the queue length
- BUG/MINOR: quic: fix crash on quic_conn alloc failure
- BUG/MAJOR: leastconn: never reuse the node after dropping the lock
- MINOR: acme: renewal notification over the dpapi sink
- CLEANUP: quic: Useless BIO_METHOD initialization
- MINOR: quic: Add useful error traces about qc_ssl_sess_init() failures
- MINOR: quic: Allow the use of the new OpenSSL 3.5.0 QUIC TLS API (to be completed)
- MINOR: quic: implement all remaining callbacks for OpenSSL 3.5 QUIC API
- MINOR: quic: OpenSSL 3.5 internal QUIC custom extension for transport parameters reset
- MINOR: quic: OpenSSL 3.5 trick to support 0-RTT
- DOC: update INSTALL for QUIC with OpenSSL 3.5 usages
- DOC: management: update 'acme status'
- BUG/MEDIUM: wdt: always ignore the first watchdog wakeup
- CLEANUP: wdt: clarify the comments on the common exit path
- BUILD: ssl: avoid possible printf format warning in traces
- BUILD: acme: fix build issue on 32-bit archs with 64-bit time_t
- DOC: management: precise some of the fields of "show servers conn"
- BUG/MEDIUM: mux-quic: fix BUG_ON() on rxbuf alloc error
- DOC: watchdog: update the doc to reflect the recent changes
- BUG/MEDIUM: acme: check if acme domains are configured
- BUG/MINOR: acme: fix formatting issue in error and logs
- EXAMPLES: lua: avoid screen refresh effect in "trisdemo"
- CLEANUP: quic: remove unused cbuf module
- MINOR: quic: move function to check stream type in utils
- MINOR: quic: refactor handling of streams after MUX release
- MINOR: quic: add some missing includes
- MINOR: quic: adjust quic_conn-t.h include list
- CLEANUP: cfgparse: alphabetically sort the global keywords
- MINOR: glitches: add global setting "tune.glitches.kill.cpu-usage"
It was mentioned during the development of glitches that it would be
nice to support not killing misbehaving connections below a certain
CPU usage so that poor implementations that routinely misbehave without
impact are not killed. This is now possible by setting a CPU usage
threshold under which we don't kill them via this parameter. It defaults
to zero so that we continue to kill them by default.
As reported in issue #2970, the output of "show servers conn" is not
clear. It was essentially meant as a debugging tool during some changes
to idle connections management, but if some users want to monitor or
graph them, more info is needed. The doc mentions the currently known
list of fields, and reminds that this output is not meant to be stable
over time, but as long as it does not change, it can provide some useful
metrics to some users.
Since e24b77e7 ('DOC: config: move the extraneous sections out of the
"global" definition') the ACME section of the configuration manual was
move from 3.13 to 12.8.
Change the reference to that section in "acme renew".
Tim reported in issue #2953 that "stick-table" and "table" were not
indexed as keywords. The issue was the indent level. Also let's make
sure to put a box around the "store" arguments as well.
There was no function for a lua filter to change the body length of an HTTP
Message. But it is mandatory to be able to alter the message payload. It is
not possible update to directly update the message headers because the
internal state of the message must also be updated accordingly.
It is the purpose of HTTPMessage.set_body_len() function. The new body
length myst be passed as argument. If it is an integer, the right
"Content-Length" header is set. If the "chunked" string is used, it forces
the message to be chunked-encoded and in that case the "Transfer-Encoding"
header.
This patch should fix the issue #2837. It could be backported as far as 2.6.
From the documentation, this wasn't clear enough that shards should
be followed by one of the options number / by-thread / by-group.
Align it with existing options in documentation so that it becomes
more explicit.
Released version 3.2-dev16 with the following main changes :
- BUG/MEDIUM: mux-quic: fix crash on invalid fctl frame dereference
- DEBUG: pool: permit per-pool UAF configuration
- MINOR: acme: add the global option 'acme.scheduler'
- DEBUG: pools: add a new integrity mode "backup" to copy the released area
- MEDIUM: sock-inet: re-check IPv6 connectivity every 30s
- BUG/MINOR: ssl: doesn't fill conf->crt with first arg
- BUG/MINOR: ssl: prevent multiple 'crt' on the same ssl-f-use line
- BUG/MINOR: ssl/ckch: always free() the previous entry during parsing
- MINOR: tools: ha_freearray() frees an array of string
- BUG/MINOR: ssl/ckch: always ha_freearray() the previous entry during parsing
- MINOR: ssl/ckch: warn when the same keyword was used twice
- BUG/MINOR: threads: fix soft-stop without multithreading support
- BUG/MINOR: tools: improve parse_line()'s robustness against empty args
- BUG/MINOR: cfgparse: improve the empty arg position report's robustness
- BUG/MINOR: server: dont depend on proxy for server cleanup in srv_drop()
- BUG/MINOR: server: perform lbprm deinit for dynamic servers
- MINOR: http: add a function to validate characters of :authority
- BUG/MEDIUM: h2/h3: reject some forbidden chars in :authority before reassembly
- MINOR: quic: account Tx data per stream
- MINOR: mux-quic: account Rx data per stream
- MINOR: quic: add stream format for "show quic"
- MINOR: quic: display QCS info on "show quic stream"
- MINOR: quic: display stream age
- BUG/MINOR: cpu-topo: fix group-by-cluster policy for disordered clusters
- MINOR: cpu-topo: add a new "group-by-ccx" CPU policy
- MINOR: cpu-topo: provide a function to sort clusters by average capacity
- MEDIUM: cpu-topo: change "performance" to consider per-core capacity
- MEDIUM: cpu-topo: change "efficiency" to consider per-core capacity
- MEDIUM: cpu-topo: prefer grouping by CCX for "performance" and "efficiency"
- MEDIUM: config: change default limits to 1024 threads and 32 groups
- BUG/MINOR: hlua: Fix Channel:data() and Channel:line() to respect documentation
- DOC: config: Fix a typo in the "term_events" definition
- BUG/MINOR: spoe: Don't report error on applet release if filter is in DONE state
- BUG/MINOR: mux-spop: Don't report error for stream if ACK was already received
- BUG/MINOR: mux-spop: Make the demux stream ID a signed integer
- BUG/MINOR: mux-spop: Don't open new streams for SPOP connection on error
- MINOR: mux-spop: Don't set SPOP connection state to FRAME_H after ACK parsing
- BUG/MEDIUM: mux-spop: Remove frame parsing states from the SPOP connection state
- BUG/MEDIUM: mux-spop: Properly handle CLOSING state
- BUG/MEDIUM: spop-conn: Report short read for partial frames payload
- BUG/MEDIUM: mux-spop: Properly detect truncated frames on demux to report error
- BUG/MEDIUM: mux-spop; Don't report a read error if there are pending data
- DEBUG: mux-spop: Review some trace messages to adjust the message or the level
- DOC: config: move address formats definition to section 2
- DOC: config: move stick-tables and peers to their own section
- DOC: config: move the extraneous sections out of the "global" definition
- CI: AWS-LC(fips): enable unit tests
- CI: AWS-LC: enable unit tests
- CI: compliance: limit run on forks only to manual + cleanup
- CI: musl: enable unit tests
- CI: QuicTLS (weekly): limit run on forks only to manual dispatch
- CI: WolfSSL: enable unit tests
Due to some historic mistakes that have spread to newly added sections,
a number of of recently added small sections found themselves described
under section 3 "global parameters" which is specific to "global" section
keywords. This is highly confusing, especially given that sections 3.1,
3.2, 3.3 and 3.10 directly start with keywords valid in the global section,
while others start with keywords that describe a new section.
Let's just create a new chapter "12. other sections" and move them all
there. 3.10 "HTTPclient tuning" however was moved to 3.4 as it's really
a definition of the global options assigned to the HTTP client. The
"programs" that are going away in 3.3 were moved at the end to avoid a
renumbering later.
Another nice benefit is that it moves a lot of text that was previously
keeping the global and proxies sections apart.
As suggested by Tim in issue #2953, stick-tables really deserve their own
section to explain the configuration. And peers have to move there as well
since they're totally dedicated to stick-tables.
Now we introduce a new section "Stick-tables and Peers", explaining the
concepts, and under which there is one subsection for stick-tables
configuration and one for the peers (which mostly keeps the existing
peers section).
Section 2 describes the config file format, variables naming etc, so
there's no reason why the address format used in this file should be
in a separate section, let's bring it into section 2 as well.
