Fixes https://github.com/certbot/certbot/issues/8292.
This uses the same approach that worked well for us in https://github.com/certbot/certbot/pull/7926. I'm sure we could delete more code or refactor things here, but I think we should make the most conservative changes we can to certbot-auto until we can just delete the entire thing.
I ran the full test suite on these changes at https://dev.azure.com/certbot/certbot/_build/results?buildId=2773&view=results and manually tested things on OpenSUSE and it worked as expected. certbot-auto refused to create new installations and refused to update old ones while continuing to allow the old version of Certbot to run.
* Deprecate cb-auto outside of Debian and RHEL.
* Don't deprecate Amazon Linux yet.
Partial fix for #8256
This PR makes tox calls pipstrap before any commands is executed, and Azure Pipelines calls pipstrap when appropriate (when an actual call to pip is done).
* Invoke pipstrap in tox and during the CI
* Set default value for PYTHON_VERSION and always set python interpreter
* Set Python for snaps_build also
* Fix the build for Windows installer
* Add a warning comment for pinned versions in pipstrap
* Rebuild letsencrypt-auto
* Same version than the installer build
* Let's update to latest pip for installer tests
This PR upgrades Certbot pinned dependencies through `letsencrypt-auto-source/rebuild_dependencies.py` while taking into account the problems detected in https://github.com/certbot/certbot/pull/8035:
* `cryptography` is pinned to `2.8` to continue to support OpenSSL 1.0.1 on non-x86 ancient Linux distributions (RHEL 6 + Debian 8)
* `parsedatetime` is pinned to `2.5` because of an incompatibility with Python 2.7 (see https://github.com/bear/parsedatetime/issues/246)
* `letsencrypt-auto-source/rebuild_dependencies.py` now takes into account the environment markers that are aded to `AUTHORITATIVE_CONSTRAINTS`: this is used for the `enum34` dependency, to not install it on Python 3.6+ and not break the distribution by swapping the built-in `enum` module during the setup of Certbot venv.
Fixes#8030
* Pin cryptography and parsedatetime
* Upgrade dependencies
* Remove authoritative constraint
* Upgrade dependencies
* Rebuild certbot-auto
* Update letsencrypt-auto-source/rebuild_dependencies.py
Co-authored-by: Brad Warren <bmw@users.noreply.github.com>
* Honor specific requirements in the AUTHORITATIVE_CONSTRAINTS
* Fix injection
* Update dependencies
* Update rebuild_dependencies.py
Co-authored-by: Brad Warren <bmw@users.noreply.github.com>
Fixes#7988. As described there, the steps involved are:
1. Update our tests so they fail due to this problem.
2. Update the keys used in the tests so they pass with the new changes.
For 1, see a [failing travis run](https://travis-ci.com/github/certbot/certbot/jobs/340710511) with the included change. And for the full output to confirm that this is what is failing, see a [run on debian 10](https://github.com/certbot/certbot/files/4692350/debian_run_log.txt).
This PR adds `rsa4096_key.pem` and `rsa4096_cert.pem`, updates the `TLS-ALPN` test to use those keys in place of the 1024-bit versions, and fixes the README in that `testdata` folder with correct instructions to generate these files.
* export PIP_NO_BINARY in pip install subshell in test_sdists.sh
* set environment variable on the line that installs most packages
* Generate 4096-bit rsa key and cert, and fix README instructions to do so.
* Update TLS_ALPN test to use 4096-bit key instead of 1024-bit key.
* Update changelog
* Older versions of Python have an error when both VIRTUAL_NO_DOWNLOAD and PIP_NO_BINARY are set, so only apply the latter at the install phase.
* Add enum34 constraint manually, since rebuild_dependencies.py seems to be broken.
* only delete key if it exists
* Check OpenSSL version before trying to set PIP_NO_BINARY
* Add comment explaining why we only set PIP_NO_BINARY at the install step
Fixes#7184.
I updated #7358 to track the issue of unpinning all of these dependencies.
* pin back configargparse
* Pin back zope packages.
* update deps
* Add changelog entry.
* run build.py
Fixes#7007
Python 3.4 is [EOL](https://www.python.org/dev/peps/pep-0429/), and only Python 3.x version available for CentOS 6 through EPEL is this version, and so is used by `certbot-auto`, the only official way to install Certbot on this platform.
This unpleasant situation becomes a little more uncomfortable, considering that the newest `pip` version (19.2) [just dropped Python 3.4 support](https://github.com/pypa/pip/issues/6685) and will refuse to start on this Python version. We can expect a lot of dependencies to follow this path now.
One direct result of this situation is that a fix to support correctly the ARM platforms requires to upgrade `pip` to 19.2 for `certbot-auto`. So this is not possible right now.
Then, let's upgrade Certbot instances on CentOS 6 to a supported version of Python 3.
This PR proposes a new bootstrap approach for CentOS 6 platform, `BootstrapRpmPython3Legacy`, that will install Python 3.6 from [SCL](https://www.softwarecollections.org) (the latest one available for now on CentOS 6). In term of Python 3 specific bootstrap methods, I take the occasion here to completely separate the bootstrap of CentOS 6 as a legacy system, from the RPM-based newest systems (like Fedora 29+) that are simply dropping support for Python 2.x. This is in prevision of future migration for all systems on Python 3.x, that is a different problematic than supporting old systems.
* Add logic
* Rebuilt letsencrypt-auto
* Fix logic
* Focus on specific packages
* Maintain PATH for further invocations of letsencrypt-auto after bootstrap.
* Various corrections
* Fix farm test for RHEL6
* Working centos6 letsencrypt-auto self tests
* Fix test_sdist for CentOS 6
* Corrections
* Work in progress
* Working configuration
* Fix typo
* Remove EPEL. Add a test.
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Improvements after review
* Improvements
* Add a comment
* Add a test
* Update a test
* Corrections
* Update function return
* Work in progress
* Correct behavior on oracle linux 6.
* Corrections
* Rebuild script
* Add letsencrypt-auto tests for oraclelinux6
* Update tox.ini
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/tests/oraclelinux6_tests.sh
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/tests/oraclelinux6_tests.sh
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Remove specific code for scientific linux
* Change some variables names
* Update letsencrypt-auto-source/tests/oraclelinux6_tests.sh
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Various corrections
* Fix tests
* Add a comment
* Update message
* Fix test message
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update scripts
* More focused assertion
* Add back a test
* Update script
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Check quiet mode
* Add changelog
* Update letsencrypt-auto-source/tests/oraclelinux6_tests.sh
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
Smallest possible fix for #7106
* Replace platform.linux_dependencies with distro.linux_dependencies
* run build.py
* Add minimum version of 1.0.1
* Pin back requests package
* Update changelog
/usr/bin/python no longer exists in RHEL 8. This patch updates
the certbot-auto script to use python3 on nodes running RHEL 8.
Also fixed a bug in the RPM_DIST_VERSION logic which would cause
letsencrypt-auto to fail on servers running CentOS/RHEL 6.
