Summary of changes in this PR:
- Refactor files involved in the `certbot` module to be of a similar structure to every other package; that is, inside a directory inside the main repo root (see below).
- Make repo root README symlink to `certbot` README.
- Pull tests outside of the distributed module.
- Make `certbot/tests` not be a module so that `certbot` isn't added to Python's path for module discovery.
- Remove `--pyargs` from test calls, and make sure to call tests from repo root since without `--pyargs`, `pytest` takes directory names rather than package names as arguments.
- Replace mentions of `.` with `certbot` when referring to packages to install, usually editably.
- Clean up some unused code around executing tests in a different directory.
- Create public shim around main and make that the entry point.
New directory structure summary:
```
repo root ("certbot", probably, but for clarity all files I mention are relative to here)
├── certbot
│ ├── setup.py
│ ├── certbot
│ │ ├── __init__.py
│ │ ├── achallenges.py
│ │ ├── _internal
│ │ │ ├── __init__.py
│ │ │ ├── account.py
│ │ │ ├── ...
│ │ ├── ...
│ ├── tests
│ │ ├── account_test.py
│ │ ├── display
│ │ │ ├── __init__.py
│ │ │ ├── ...
│ │ ├── ... # note no __init__.py at this level
│ ├── ...
├── acme
│ ├── ...
├── certbot-apache
│ ├── ...
├── ...
```
* refactor certbot/ and certbot/tests/ to use the same structure as the other packages
* git grep -lE "\-e(\s+)\." | xargs sed -i -E "s/\-e(\s+)\./-e certbot/g"
* git grep -lE "\.\[dev\]" | xargs sed -i -E "s/\.\[dev\]/certbot[dev]/g"
* git grep -lE "\.\[dev3\]" | xargs sed -i -E "s/\.\[dev3\]/certbot[dev3]/g"
* Remove replacement of certbot into . in install_and_test.py
* copy license back out to main folder
* remove linter_plugin.py and CONTRIBUTING.md from certbot/MANIFEST.in because these files are not under certbot/
* Move README back into main folder, and make the version inside certbot/ a symlink
* symlink certbot READMEs the other way around
* move testdata into the public api certbot zone
* update source_paths in tox.ini to certbot/certbot to find the right subfolder for tests
* certbot version has been bumped down a directory level
* make certbot tests directory not a package and import sibling as module
* Remove unused script cruft
* change . to certbot in test_sdists
* remove outdated comment referencing a command that doesn't work
* Install instructions should reference an existing file
* update file paths in Dockerfile
* some package named in tox.ini were manually specified, change those to certbot
* new directory format doesn't work easily with pyargs according to http://doc.pytest.org/en/latest/goodpractices.html#tests-as-part-of-application-code
* remove other instance of pyargs
* fix up some references in _release.sh by searching for ' . ' and manual check
* another stray . in tox.ini
* fix paths in tools/_release.sh
* Remove final --pyargs call, and now-unnecessary call to modules instead of local files, since that's fixed by certbot's code being one layer deeper
* Create public shim around main and make that the entry point
* without pyargs, tests cannot be run from an empty directory
* Remove cruft for running certbot directly from main
* Have main shim take real arg
* add docs/api file for main, and fix up main comment
* Update certbot/docs/install.rst
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Fix comments in readthedocs requirements files to refer to current package
* Update .[docs] reference in contributing.rst
* Move plugins tests to certbot tests directory
* add certbot tests to MANIFEST.in so packagers can run python setup.py test
* move examples directory inside certbot/
* Move CHANGELOG into certbot, and create a top-level symlink
* Remove unused sys and logging from main shim
* nginx http01 test no longer relies on certbot plugins common test
Fixes#7184.
I updated #7358 to track the issue of unpinning all of these dependencies.
* pin back configargparse
* Pin back zope packages.
* update deps
* Add changelog entry.
* run build.py
When you try to run this script, it crashes with:
```
standard_init_linux.go:211: exec user process caused "exec format error"
```
This is caused by the script being written to have the contents:
```
\
#!/bin/sh
set -e
...
```
This fixes the problem by removing the slash and moving the shebang to the first line of the string.
Fixes#7007
Python 3.4 is [EOL](https://www.python.org/dev/peps/pep-0429/), and only Python 3.x version available for CentOS 6 through EPEL is this version, and so is used by `certbot-auto`, the only official way to install Certbot on this platform.
This unpleasant situation becomes a little more uncomfortable, considering that the newest `pip` version (19.2) [just dropped Python 3.4 support](https://github.com/pypa/pip/issues/6685) and will refuse to start on this Python version. We can expect a lot of dependencies to follow this path now.
One direct result of this situation is that a fix to support correctly the ARM platforms requires to upgrade `pip` to 19.2 for `certbot-auto`. So this is not possible right now.
Then, let's upgrade Certbot instances on CentOS 6 to a supported version of Python 3.
This PR proposes a new bootstrap approach for CentOS 6 platform, `BootstrapRpmPython3Legacy`, that will install Python 3.6 from [SCL](https://www.softwarecollections.org) (the latest one available for now on CentOS 6). In term of Python 3 specific bootstrap methods, I take the occasion here to completely separate the bootstrap of CentOS 6 as a legacy system, from the RPM-based newest systems (like Fedora 29+) that are simply dropping support for Python 2.x. This is in prevision of future migration for all systems on Python 3.x, that is a different problematic than supporting old systems.
* Add logic
* Rebuilt letsencrypt-auto
* Fix logic
* Focus on specific packages
* Maintain PATH for further invocations of letsencrypt-auto after bootstrap.
* Various corrections
* Fix farm test for RHEL6
* Working centos6 letsencrypt-auto self tests
* Fix test_sdist for CentOS 6
* Corrections
* Work in progress
* Working configuration
* Fix typo
* Remove EPEL. Add a test.
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Improvements after review
* Improvements
* Add a comment
* Add a test
* Update a test
* Corrections
* Update function return
* Work in progress
* Correct behavior on oracle linux 6.
* Corrections
* Rebuild script
* Add letsencrypt-auto tests for oraclelinux6
* Update tox.ini
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/tests/oraclelinux6_tests.sh
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/tests/oraclelinux6_tests.sh
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Remove specific code for scientific linux
* Change some variables names
* Update letsencrypt-auto-source/tests/oraclelinux6_tests.sh
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Various corrections
* Fix tests
* Add a comment
* Update message
* Fix test message
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update scripts
* More focused assertion
* Add back a test
* Update script
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Check quiet mode
* Add changelog
* Update letsencrypt-auto-source/tests/oraclelinux6_tests.sh
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
Smallest possible fix for #7106
* Replace platform.linux_dependencies with distro.linux_dependencies
* run build.py
* Add minimum version of 1.0.1
* Pin back requests package
* Update changelog
/usr/bin/python no longer exists in RHEL 8. This patch updates
the certbot-auto script to use python3 on nodes running RHEL 8.
Also fixed a bug in the RPM_DIST_VERSION logic which would cause
letsencrypt-auto to fail on servers running CentOS/RHEL 6.
