Partial fix for #8256
This PR makes tox calls pipstrap before any commands is executed, and Azure Pipelines calls pipstrap when appropriate (when an actual call to pip is done).
* Invoke pipstrap in tox and during the CI
* Set default value for PYTHON_VERSION and always set python interpreter
* Set Python for snaps_build also
* Fix the build for Windows installer
* Add a warning comment for pinned versions in pipstrap
* Rebuild letsencrypt-auto
* Same version than the installer build
* Let's update to latest pip for installer tests
This PR upgrades Certbot pinned dependencies through `letsencrypt-auto-source/rebuild_dependencies.py` while taking into account the problems detected in https://github.com/certbot/certbot/pull/8035:
* `cryptography` is pinned to `2.8` to continue to support OpenSSL 1.0.1 on non-x86 ancient Linux distributions (RHEL 6 + Debian 8)
* `parsedatetime` is pinned to `2.5` because of an incompatibility with Python 2.7 (see https://github.com/bear/parsedatetime/issues/246)
* `letsencrypt-auto-source/rebuild_dependencies.py` now takes into account the environment markers that are aded to `AUTHORITATIVE_CONSTRAINTS`: this is used for the `enum34` dependency, to not install it on Python 3.6+ and not break the distribution by swapping the built-in `enum` module during the setup of Certbot venv.
Fixes#8030
* Pin cryptography and parsedatetime
* Upgrade dependencies
* Remove authoritative constraint
* Upgrade dependencies
* Rebuild certbot-auto
* Update letsencrypt-auto-source/rebuild_dependencies.py
Co-authored-by: Brad Warren <bmw@users.noreply.github.com>
* Honor specific requirements in the AUTHORITATIVE_CONSTRAINTS
* Fix injection
* Update dependencies
* Update rebuild_dependencies.py
Co-authored-by: Brad Warren <bmw@users.noreply.github.com>
Fixes#7988. As described there, the steps involved are:
1. Update our tests so they fail due to this problem.
2. Update the keys used in the tests so they pass with the new changes.
For 1, see a [failing travis run](https://travis-ci.com/github/certbot/certbot/jobs/340710511) with the included change. And for the full output to confirm that this is what is failing, see a [run on debian 10](https://github.com/certbot/certbot/files/4692350/debian_run_log.txt).
This PR adds `rsa4096_key.pem` and `rsa4096_cert.pem`, updates the `TLS-ALPN` test to use those keys in place of the 1024-bit versions, and fixes the README in that `testdata` folder with correct instructions to generate these files.
* export PIP_NO_BINARY in pip install subshell in test_sdists.sh
* set environment variable on the line that installs most packages
* Generate 4096-bit rsa key and cert, and fix README instructions to do so.
* Update TLS_ALPN test to use 4096-bit key instead of 1024-bit key.
* Update changelog
* Older versions of Python have an error when both VIRTUAL_NO_DOWNLOAD and PIP_NO_BINARY are set, so only apply the latter at the install phase.
* Add enum34 constraint manually, since rebuild_dependencies.py seems to be broken.
* only delete key if it exists
* Check OpenSSL version before trying to set PIP_NO_BINARY
* Add comment explaining why we only set PIP_NO_BINARY at the install step
Fixes#7184.
I updated #7358 to track the issue of unpinning all of these dependencies.
* pin back configargparse
* Pin back zope packages.
* update deps
* Add changelog entry.
* run build.py
Fixes#7007
Python 3.4 is [EOL](https://www.python.org/dev/peps/pep-0429/), and only Python 3.x version available for CentOS 6 through EPEL is this version, and so is used by `certbot-auto`, the only official way to install Certbot on this platform.
This unpleasant situation becomes a little more uncomfortable, considering that the newest `pip` version (19.2) [just dropped Python 3.4 support](https://github.com/pypa/pip/issues/6685) and will refuse to start on this Python version. We can expect a lot of dependencies to follow this path now.
One direct result of this situation is that a fix to support correctly the ARM platforms requires to upgrade `pip` to 19.2 for `certbot-auto`. So this is not possible right now.
Then, let's upgrade Certbot instances on CentOS 6 to a supported version of Python 3.
This PR proposes a new bootstrap approach for CentOS 6 platform, `BootstrapRpmPython3Legacy`, that will install Python 3.6 from [SCL](https://www.softwarecollections.org) (the latest one available for now on CentOS 6). In term of Python 3 specific bootstrap methods, I take the occasion here to completely separate the bootstrap of CentOS 6 as a legacy system, from the RPM-based newest systems (like Fedora 29+) that are simply dropping support for Python 2.x. This is in prevision of future migration for all systems on Python 3.x, that is a different problematic than supporting old systems.
* Add logic
* Rebuilt letsencrypt-auto
* Fix logic
* Focus on specific packages
* Maintain PATH for further invocations of letsencrypt-auto after bootstrap.
* Various corrections
* Fix farm test for RHEL6
* Working centos6 letsencrypt-auto self tests
* Fix test_sdist for CentOS 6
* Corrections
* Work in progress
* Working configuration
* Fix typo
* Remove EPEL. Add a test.
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Improvements after review
* Improvements
* Add a comment
* Add a test
* Update a test
* Corrections
* Update function return
* Work in progress
* Correct behavior on oracle linux 6.
* Corrections
* Rebuild script
* Add letsencrypt-auto tests for oraclelinux6
* Update tox.ini
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/tests/oraclelinux6_tests.sh
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/tests/oraclelinux6_tests.sh
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Remove specific code for scientific linux
* Change some variables names
* Update letsencrypt-auto-source/tests/oraclelinux6_tests.sh
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Various corrections
* Fix tests
* Add a comment
* Update message
* Fix test message
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update scripts
* More focused assertion
* Add back a test
* Update script
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Check quiet mode
* Add changelog
* Update letsencrypt-auto-source/tests/oraclelinux6_tests.sh
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
Smallest possible fix for #7106
* Replace platform.linux_dependencies with distro.linux_dependencies
* run build.py
* Add minimum version of 1.0.1
* Pin back requests package
* Update changelog
This PR attempts to better inform people about the problem identified at https://community.letsencrypt.org/t/certbot-auto-deployment-best-practices/91979/.
I was hesitant to add the flag --no-permissions-check, however, if there's some obscure distro out there (or custom user setup) that has a strange users and groups, I didn't want us to either:
Have to put out a bug fix release
Refuse to fix the problem and let them deal with warnings on every run
* add check_permissions.py
* Update letsencrypt-auto.template.
* build letsencrypt-auto
* Add test_permissions_warnings to auto_test
* Allow uid/gid < 1000.
* Add --no-permissions-check to Certbot.
* Add --no-permissions-check to certbot-auto.
* Add test farm test that letsencrypt-auto is quiet.
As a bonus, this new test will catch problems like the one that the caused
0.33.1 point release.
* Update CHANGELOG about permissions check.
* Update permissions comment.
* Fix symlink handling.
* Use a better default in auto_test.py.
Dependencies generated by the script introduced with #6839 were not including anymore the fix about enum34 for CentOS 6.
This PR reinserts this fix, and updates the script overrides to ensure that this fix will stay in next dependencies generation.
* Add the environment marker back. Ensure that it will stay by adding an override to dependencies generator.
* Add comments, for future fix
* Update letsencrypt-auto-source/rebuild_dependencies.py
Co-Authored-By: adferrand <adferrand@users.noreply.github.com>
* Update comment
Fixes#6698
Fedora maintainers engaged a deprecation path for Python 2.x with Fedora 29. As a first step, python2-virtualenv does not install the virtualenv binary anymore, in favor of python3-virtualenv, and so the installation of Python 3 virtual environments by default.
However, certbot-auto installs python2-virtualenv for all recent RPM distributions, and relies of the execution of virtualenv, and this is failing the process.
Since the plan in the future is to remove Python 2.x from Fedora, this PR follows this logic to fix certbot-auto: started to Fedora 29, certbot-auto will install and execute certbot on Python 3. This implies to detect that we are on Fedora 29+, install python3-virtualenv that will install also Python 3 dependencies and virtualenv binary, then instruct the process to use Python 3. This is in fact similar to EOL distributions shipping with Python 2.6, and for which Python 3.4 from EPEL is installed and used.
Older versions of Fedora continue to use Python 2.x, and their process is untouched. Four scenarios are covered here:
fresh Fedora 28: old process is used, nothing changes
fresh Fedora 29: new process is used, Python 3 is installed, certbot runs on it
update Fedora 29 from 28, already installed certbot-auto without rebootstrapping required: existing venv continue to be used, certbot runs on it
update Fedora 29 from 28, already installed certbot-auto with rebootstrapping required: new process is used, installing python3-virtualenv, python3-devel and python3-rpm-macros, Python 3 is installed, certbot runs on it
* Add a step to handle python3 on fedora29
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: adferrand <adferrand@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: adferrand <adferrand@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: adferrand <adferrand@users.noreply.github.com>
* Update rpm_python3.sh
* Rebuild certbot-auto
* Empty commit to relaunch CI pipeline
* Add changelog
* Update CHANGELOG.md
Co-Authored-By: adferrand <adferrand@users.noreply.github.com>
* Update CHANGELOG.md
Fixes#6228.
Since OpenSUSE Leap 15, python-virtualenv became a source package, breaking certbot-auto bootstrap on this version. Then python2-virtualenv must be used to create Python 2.x virtual environments.
This PR makes certbot-auto compatible to prior and after Leap 15, by testing the existence of python-virtualenv on current OpenSUSE system, and then use appropriate packages.
* Cover case of OpenSUSE Leap 15+ in certbot-auto
* Revert increment on bootstrap for OpenSUSE
* Fix configuration for Leap15+
* Add comment about explicit installation of python2-setuptools
* Update letsencrypt-auto-source/pieces/bootstrappers/suse_common.sh
Co-Authored-By: adferrand <adferrand@users.noreply.github.com>
* Update letsencrypt-auto
* Fix pipstrap on windows
* Pipstrap pin setuptools version, so explicit install it is not needed anymore.
* Rebuild letsencrypt-auto source
* Use sys.executable in pipstrap to allow straightforward execution in a venv by choosing the python interpreter from this venv.
* Update letsencrypt-auto
* Simulate test-everything
* Revert "Simulate test-everything"
This reverts commit b62c4d719a.
* Clean pipstrap code
