This PR builds off of #7240 to fix#7241.
The code in certbot-auto is unchanged which I +1. Someone else should give it a 2nd review.
For the code in the tests, you can see all tests passing (including test_tests.sh) at https://travis-ci.com/certbot/certbot/builds/122198270.
I created #7301 to track removing the temporary code in test_leauto_upgrades.sh as suggested at #7282 (comment).
One noteworthy thing here is I did not add the RHEL 8 AMI to the Apache tests due to #7273. This problem is not related to support in certbot-auto though, is an edge case, and I do not personally believe it should block this PR.
Inspired by the number of ARM users we have (and because I want to rip out the only 32 bit test we have which without this PR would remove all tests we have on non-x86_64 architectures), this test adds an ARM image to the test farm tests. The image ID was taken from https://wiki.debian.org/Cloud/AmazonEC2Image/Stretch, you can see tests passing at https://travis-ci.com/certbot/certbot/builds/116857897, and I ran test_tests.sh locally and it passed.
Fixes#6955.
This updates the Fedora version used in our test farm tests to Fedora 30. The AMI ID comes from https://alt.fedoraproject.org/cloud/ where it is listed as their standard HVM AMI for the region we use us-east-1 (US East (N. Virginia)).
Unfortunately, there were a lot of small changes required for this. The big reason for this is on Fedora, there isn't a Python 2 executable installed. In fact, there's not even an executable named python. It's just python3. Rather than installing another Python in each test, I wrote a script that the test scripts can share to figure out the different paths and names that should be used in their script. (This isn't used in test_sdists.sh because the logic is a little different.)
Other changes here worth flagging are:
I changed the name of the variable RUN_PYTHON3_TESTS in test_leauto_upgrades.sh to RUN_RHEL6_TESTS. The tests that are run when this variable is set test the upgrade from Python 2 to Python 3 on RHEL 6. I think this new name is much better now that we also have Fedora running Python 3.
I made tools/simple_http_server.py work on Python 3.
You can see tests passing with these changes at https://travis-ci.com/certbot/certbot/builds/113821476. I also ran test_tests.sh and they passed.
* Update to Fedora 30 in test farm tests.
Fedora 28 is likely to reach its EOL soon.
* Add set_python_envvars.sh.
* Fix test_apache2.sh on python3 only distros.
* Fix test_leauto_upgrades.sh on python3 systems.
* Fix certonly_standalone tests with python3 only
* Fix test_sdists.sh on python3 only distros.
* Make simple_http_server.py work on Python 3.
* add comments
You can see the full test suite running at https://travis-ci.com/certbot/certbot/builds/112291892.
A few noteworthy things:
--fast is included because without, the tests would sometimes reach Travis' 50 minute timeout even with 1 test script per Travis build.
The only script that is run at release time which is not being run here is https://github.com/certbot/certbot/blob/master/tests/letstest/scripts/test_tests.sh because that script runs tests on the packages installed by certbot-auto which won't be updated until midway through a release.
We check TRAVIS_PULL_REQUEST and error out if it is not false for simplicity which should be fine because these tests are never run on PRs. The reason it's more complex to run test farm tests on PRs is the test farm tests need a named branch to pull from and Travis effectively merges the PR into the target branch before running tests complicating this.
I don't think this should block this PRs, but the one final change we may want to make to the current setup is #7071.
* Add encrypted private key.
* Add test farm tests to tox and travis.
* Change magic profile name.
* Further split test farm tests.
* Build local branch.
* more depth
* Set LOGDIR at top of script.
* Set sentinel at top of script.
* Don't use EC2 global to block on instance start.
* Remove global boto3 state.
* Pass in boulder_url.
* Create main function.
* Add link to reload docs.
Fixes#7012.
Apparently, the previous test we had here doesn't catch the case when certbot-auto prints blank lines. (I don't yet understand why so if someone does, please let me know!)
Regardless, I fixed up the test and verified it fails with the version of letsencrypt-auto in master and then fixed letsencrypt-auto so the test passes.
I ran test farm tests on the changes here and they passed on all instances.
* correct test
* fixes#7012
We made this change locally yesterday while preparing the release.
I tested this change on all AMIs currently in the test farm as well as Fedora 29 and this test passed on all instances.
Recent changes are no longer compatible with the old version of boulder used in the test farm tests. This PR updates the version of boulder used, and runs it with the new way of running boulder.
A new ami was created and is used here that uses Ubuntu 18.04, so that docker-compose can be installed more properly.
Removed commented-out section about rabbitmq that was already deprecated.
Switched to using the public DNS resolver 8.8.8.8 for the tests because the way to find the correct local resolver changed.
This PR attempts to better inform people about the problem identified at https://community.letsencrypt.org/t/certbot-auto-deployment-best-practices/91979/.
I was hesitant to add the flag --no-permissions-check, however, if there's some obscure distro out there (or custom user setup) that has a strange users and groups, I didn't want us to either:
Have to put out a bug fix release
Refuse to fix the problem and let them deal with warnings on every run
* add check_permissions.py
* Update letsencrypt-auto.template.
* build letsencrypt-auto
* Add test_permissions_warnings to auto_test
* Allow uid/gid < 1000.
* Add --no-permissions-check to Certbot.
* Add --no-permissions-check to certbot-auto.
* Add test farm test that letsencrypt-auto is quiet.
As a bonus, this new test will catch problems like the one that the caused
0.33.1 point release.
* Update CHANGELOG about permissions check.
* Update permissions comment.
* Fix symlink handling.
* Use a better default in auto_test.py.
Fixes#6861.
_venv_common.py is no longer executable. The reason for this is the venv creation logic is now different between Python 2 and Python 3. We could add code that branches on the Python version running the script, but I personally think that's unnecessary.
--setuptools and --no-site-packages is no longer passed to virtualenv either. These flags were made noops in virtualenv 1.10 and 1.7 respectively, but all of CentOS 6, 7, Debian 8+, and Ubuntu 14.04+ have new enough versions of virtualenv where these flags are no longer necessary. They are not even accepted as flags to Python 3's venv module.
Use of VENV_ARGS from test_sdists.sh was also removed because that environment variable hasn't done anything in a while.
I ran test farm tests on test_apache2.sh and test_sdists.sh with these changes and they passed.
* Fixes#6861.
* _venv_common is no longer executable.
* Reenabling OCSP cryptography support
* Refactor the validation logic of OCSP response to match the OpenSSL one
* Prepare runtime for OCSP response test
* Move unrelated test to another relevant place
* Reimplement OCSP status checks in integration tests
* Clean script
* Protect OCSP check against connection errors
* Update tests/certbot-boulder-integration.sh
Co-Authored-By: adferrand <adferrand@users.noreply.github.com>
* Cleaning
* Add a specific script for letsencrypt-auto install+help
* Remove inconsistent assertion
* Add executable permissions
* Remove unused variable
* Move testdata
* Corrected cleanup code
* Empty commit
Fixes#6106.
AMIs were taken from https://wiki.debian.org/Cloud/AmazonEC2Image/Stretch and https://cloud-images.ubuntu.com/locator/ec2/.
I didn't update the AMI for Fedora due to #6698.
These new AMIs pass on all test farm tests we run during the release process except Ubuntu 18.04 and 18.10 fail on test_apache2.sh. This is tracked at #6706. If this PR lands before this issue is resolved, we should list these systems as expected failures in the release notes.
Adding these AMIs slows down our tests significantly. I didn't measure it, but it feels 50-100% slower at least on my setup. I think it's worth it though.
* Update test farm targets.
* use different ubuntu ami
* Fix test_leauto_upgrades.sh on newer OSes.
Fixes#6585.
I wrote up three suggestions for fixing this at https://github.com/certbot/certbot/issues/6585#issuecomment-448054502. I took the middle approach of requiring the user to provide an ACME server to use. I like this better than the other approaches which were:
> Resolve#5938 instead of this issue.
There is value in these tests as is over the compatibility tests in that they don't use Docker and run on different OSes.
> Spin up a local Python server to return the directory object.
Trying to set up a dummy ACME server seemed hacky and error prone.
Other notes about this PR are:
* I put the Pebble setup in `tox.ini` rather than `.travis.yml` as this seems much cleaner and more natural.
* I created a new `tox` environment called `apacheconftest-with-pebble` that reuses the code from `testenv:apacheconftest` so `apacheconftest` can continue to be used with servers other than Pebble like is done in our test farm tests.
* I chose the environment variable `SERVER` for consistency with our integration tests. I chose to not give this environment variable a default but to fail fast when it is not set.
* I ran test farm tests on this PR and they passed.
Certbot relies heavily on bash scripts to deploy a development environment and to execute tests. This is fine for Linux systems, including Travis, but problematic for Windows machines.
This PR converts all theses scripts into Python, to make them platform independant.
As a consequence, tox-win.ini is not needed anymore, and tox can be run indifferently on Windows or on Linux using a common tox.ini. AppVeyor is updated accordingly to execute tests for acme, certbot and all dns plugins. Other tests are not executed as they are for Docker, unsupported Apache/Nginx/Postfix plugins (for now) or not relevant for Windows (explicit Linux distribution tests or pylint).
Another PR will be done on certbot website to update how a dev environment can be set up.
* Replace several shell scripts by python equivalent.
* Correction on tox coverage
* Extend usage of new python scripts
* Various corrections
* Replace venv construction bash scripts by python equivalents
* Update tox.ini
* Unicode lines to compare files
* Put modifications on letsencrypt-auto-source instead of generated scripts
* Add executable permissions for Linux.
* Merge tox win tests into main tox
* Skip lock_test on Windows
* Correct appveyor config
* Update appveyor.yml
* Explicit coverage py27 or py37
* Avoid to cover non supported certbot plugins on Windows
* Update tox.ini
* Remove specific warnings during CI
* No cover on a debug code for tests only.
* Update documentation and help script on venv/venv3.py
* Customize help message for Windows
* Quote correctly executable path with potential spaces in it.
* Copy pipstrap from upstream
Debian Wheezy is no longer supported (see https://wiki.debian.org/LTS) and
Amazon shut down their Debian 7 mirrors so let's stop trying to use Debian 7
during testing.
See https://wiki.ubuntu.com/Releases.
Ubuntu 15.* repositories have been shut down for months now causing our tests
to always fail on these systems. While the tests on Ubuntu 12.04 still work, it
has been unsupported by Canonical for almost a year and I don't think we should
hamstring ourselves trying to continue to support it ourselves.
* Drop support for EOL Python 2.6
* Use more helpful assertIn/NotIn instead of assertTrue/False
* Drop support for EOL Python 3.3
* Remove redundant Python 3.3 code
* Restore code for RHEL 6 and virtualenv for Py2.7
* Revert pipstrap.py to upstream
* Merge py26_packages and non_py26_packages into all_packages
* Revert changes to *-auto in root
* Update by calling letsencrypt-auto-source/build.py
* Revert permissions for pipstrap.py
* Fix rebootstrapping before venv move
* add regression test
* dedupe test
* Cleanup case when two venvs exist.
* Add clarifying comment
* Add double venv test to leauto_upgrades
* Fix logic with the help of coffee
* redirect stderr
* pass VENV_PATH through sudo
* redirect stderr
