upstream/certbot
1
0
Fork 0
mirror of https://github.com/certbot/certbot.git synced 2026-06-06 23:32:06 -04:00
Code Issues Projects Releases Packages Wiki Activity Actions 2
certbot/certbot-compatibility-test/Dockerfile

23 lines
795 B
Docker
Raw Permalink Normal View History

Move compatibility tests off of certbot-auto and Python 2 (#8248) Fixes https://github.com/certbot/certbot/issues/8162. I had to update the base of the Dockerfile to get a new enough version of Python 3. I also simplified things a lot and removed a lot of the comments that were essentially just describing how Dockerfiles work. The most complicated changes here are in `testdata`. You can find a diff of the changes to `nginx.tar.gz` at https://gist.github.com/c7727db0cecf3f15f02439f085c73848. The first problem was that there were some complaints from the new Apache/nginx/OpenSSL version about the 1024 bit RSA key so I updated `empty_cert.pem` both inside and outside of the tarball as well as the corresponding private key in the tarball to use a 2048 bit key. The 2nd problem is trickier to understand. If you look at the output from nginx after loading the config from `lots/` you'll see it complaining about conflicting `server_name` directives for the directives I deleted. See https://dev.azure.com/certbot/certbot/_build/results?buildId=2578&view=logs&j=250aa146-b243-5f8f-bf86-17a529c9fb7e&t=9baa2014-9673-5e78-8f4f-7a463caf2bfa&l=1516. After switching the tests to Python 3, tests on that domain started failing. What I believe to be happening is we were just lucky these tests were passing to begin with. In both the Apache and Nginx plugin, if there are conflicting virtual hosts like this, we just arbitrarily pick one. The relevant code here for nginx is https://github.com/certbot/certbot/blob/575092d6030330ed8379babaa4cbbfe43e7bf721/certbot-nginx/certbot_nginx/_internal/configurator.py#L455 I played around with a debugger and confirmed that before I removed the conflicting server names, there were two exact matches for the domain we were searching for here. I think all that's going on is with the switch to Python 3, the vhost we happen to choose changes and "breaks" the test. I suspect this to be due to something like getting values out of a dict somewhere where the order of items in a dict while iterating over it is different between Python 2 and 3. I didn't track where this difference happens down, but I personally don't think it's a good use of time since I think the real problem here is that the nginx config being tested was invalid with conflicting `server` blocks. I removed all references to the `server_name` causing conflicts in that nginx configuration because both server blocks had other domains that are being tested, but I could add either back if you prefer. You can see the `nginx_compat` test passing with these changes at https://dev.azure.com/certbot/certbot/_build/results?buildId=2587&view=logs&j=250aa146-b243-5f8f-bf86-17a529c9fb7e. * update Dockerfile * Fix apache_compat on py3. * Update empty_cert.pem. The command used here was `openssl req -key certbot/certbot/tests/testdata/rsa2048_key.pem -new -subj '/CN=example.com' -x509 > certbot-compatibility-test/certbot_compatibility_test/testdata/empty_cert.pem`. * update nginx.tar.gz * Remove conflicting server_names
2020-09-09 18:16:52 -04:00
FROM debian:buster
Add certbot-compatibility-test Dockerfiles
2016-08-10 19:08:30 -04:00
MAINTAINER Brad Warren <bmw@eff.org>
Move compatibility tests off of certbot-auto and Python 2 (#8248) Fixes https://github.com/certbot/certbot/issues/8162. I had to update the base of the Dockerfile to get a new enough version of Python 3. I also simplified things a lot and removed a lot of the comments that were essentially just describing how Dockerfiles work. The most complicated changes here are in `testdata`. You can find a diff of the changes to `nginx.tar.gz` at https://gist.github.com/c7727db0cecf3f15f02439f085c73848. The first problem was that there were some complaints from the new Apache/nginx/OpenSSL version about the 1024 bit RSA key so I updated `empty_cert.pem` both inside and outside of the tarball as well as the corresponding private key in the tarball to use a 2048 bit key. The 2nd problem is trickier to understand. If you look at the output from nginx after loading the config from `lots/` you'll see it complaining about conflicting `server_name` directives for the directives I deleted. See https://dev.azure.com/certbot/certbot/_build/results?buildId=2578&view=logs&j=250aa146-b243-5f8f-bf86-17a529c9fb7e&t=9baa2014-9673-5e78-8f4f-7a463caf2bfa&l=1516. After switching the tests to Python 3, tests on that domain started failing. What I believe to be happening is we were just lucky these tests were passing to begin with. In both the Apache and Nginx plugin, if there are conflicting virtual hosts like this, we just arbitrarily pick one. The relevant code here for nginx is https://github.com/certbot/certbot/blob/575092d6030330ed8379babaa4cbbfe43e7bf721/certbot-nginx/certbot_nginx/_internal/configurator.py#L455 I played around with a debugger and confirmed that before I removed the conflicting server names, there were two exact matches for the domain we were searching for here. I think all that's going on is with the switch to Python 3, the vhost we happen to choose changes and "breaks" the test. I suspect this to be due to something like getting values out of a dict somewhere where the order of items in a dict while iterating over it is different between Python 2 and 3. I didn't track where this difference happens down, but I personally don't think it's a good use of time since I think the real problem here is that the nginx config being tested was invalid with conflicting `server` blocks. I removed all references to the `server_name` causing conflicts in that nginx configuration because both server blocks had other domains that are being tested, but I could add either back if you prefer. You can see the `nginx_compat` test passing with these changes at https://dev.azure.com/certbot/certbot/_build/results?buildId=2587&view=logs&j=250aa146-b243-5f8f-bf86-17a529c9fb7e. * update Dockerfile * Fix apache_compat on py3. * Update empty_cert.pem. The command used here was `openssl req -key certbot/certbot/tests/testdata/rsa2048_key.pem -new -subj '/CN=example.com' -x509 > certbot-compatibility-test/certbot_compatibility_test/testdata/empty_cert.pem`. * update nginx.tar.gz * Remove conflicting server_names
2020-09-09 18:16:52 -04:00
RUN apt-get update && \
apt install python3-dev python3-venv gcc libaugeas0 libssl-dev \
libffi-dev ca-certificates openssl -y
Add certbot-compatibility-test Dockerfiles
2016-08-10 19:08:30 -04:00
Move compatibility tests off of certbot-auto and Python 2 (#8248) Fixes https://github.com/certbot/certbot/issues/8162. I had to update the base of the Dockerfile to get a new enough version of Python 3. I also simplified things a lot and removed a lot of the comments that were essentially just describing how Dockerfiles work. The most complicated changes here are in `testdata`. You can find a diff of the changes to `nginx.tar.gz` at https://gist.github.com/c7727db0cecf3f15f02439f085c73848. The first problem was that there were some complaints from the new Apache/nginx/OpenSSL version about the 1024 bit RSA key so I updated `empty_cert.pem` both inside and outside of the tarball as well as the corresponding private key in the tarball to use a 2048 bit key. The 2nd problem is trickier to understand. If you look at the output from nginx after loading the config from `lots/` you'll see it complaining about conflicting `server_name` directives for the directives I deleted. See https://dev.azure.com/certbot/certbot/_build/results?buildId=2578&view=logs&j=250aa146-b243-5f8f-bf86-17a529c9fb7e&t=9baa2014-9673-5e78-8f4f-7a463caf2bfa&l=1516. After switching the tests to Python 3, tests on that domain started failing. What I believe to be happening is we were just lucky these tests were passing to begin with. In both the Apache and Nginx plugin, if there are conflicting virtual hosts like this, we just arbitrarily pick one. The relevant code here for nginx is https://github.com/certbot/certbot/blob/575092d6030330ed8379babaa4cbbfe43e7bf721/certbot-nginx/certbot_nginx/_internal/configurator.py#L455 I played around with a debugger and confirmed that before I removed the conflicting server names, there were two exact matches for the domain we were searching for here. I think all that's going on is with the switch to Python 3, the vhost we happen to choose changes and "breaks" the test. I suspect this to be due to something like getting values out of a dict somewhere where the order of items in a dict while iterating over it is different between Python 2 and 3. I didn't track where this difference happens down, but I personally don't think it's a good use of time since I think the real problem here is that the nginx config being tested was invalid with conflicting `server` blocks. I removed all references to the `server_name` causing conflicts in that nginx configuration because both server blocks had other domains that are being tested, but I could add either back if you prefer. You can see the `nginx_compat` test passing with these changes at https://dev.azure.com/certbot/certbot/_build/results?buildId=2587&view=logs&j=250aa146-b243-5f8f-bf86-17a529c9fb7e. * update Dockerfile * Fix apache_compat on py3. * Update empty_cert.pem. The command used here was `openssl req -key certbot/certbot/tests/testdata/rsa2048_key.pem -new -subj '/CN=example.com' -x509 > certbot-compatibility-test/certbot_compatibility_test/testdata/empty_cert.pem`. * update nginx.tar.gz * Remove conflicting server_names
2020-09-09 18:16:52 -04:00
WORKDIR /opt/certbot/src
Add certbot-compatibility-test Dockerfiles
2016-08-10 19:08:30 -04:00
Move compatibility tests off of certbot-auto and Python 2 (#8248) Fixes https://github.com/certbot/certbot/issues/8162. I had to update the base of the Dockerfile to get a new enough version of Python 3. I also simplified things a lot and removed a lot of the comments that were essentially just describing how Dockerfiles work. The most complicated changes here are in `testdata`. You can find a diff of the changes to `nginx.tar.gz` at https://gist.github.com/c7727db0cecf3f15f02439f085c73848. The first problem was that there were some complaints from the new Apache/nginx/OpenSSL version about the 1024 bit RSA key so I updated `empty_cert.pem` both inside and outside of the tarball as well as the corresponding private key in the tarball to use a 2048 bit key. The 2nd problem is trickier to understand. If you look at the output from nginx after loading the config from `lots/` you'll see it complaining about conflicting `server_name` directives for the directives I deleted. See https://dev.azure.com/certbot/certbot/_build/results?buildId=2578&view=logs&j=250aa146-b243-5f8f-bf86-17a529c9fb7e&t=9baa2014-9673-5e78-8f4f-7a463caf2bfa&l=1516. After switching the tests to Python 3, tests on that domain started failing. What I believe to be happening is we were just lucky these tests were passing to begin with. In both the Apache and Nginx plugin, if there are conflicting virtual hosts like this, we just arbitrarily pick one. The relevant code here for nginx is https://github.com/certbot/certbot/blob/575092d6030330ed8379babaa4cbbfe43e7bf721/certbot-nginx/certbot_nginx/_internal/configurator.py#L455 I played around with a debugger and confirmed that before I removed the conflicting server names, there were two exact matches for the domain we were searching for here. I think all that's going on is with the switch to Python 3, the vhost we happen to choose changes and "breaks" the test. I suspect this to be due to something like getting values out of a dict somewhere where the order of items in a dict while iterating over it is different between Python 2 and 3. I didn't track where this difference happens down, but I personally don't think it's a good use of time since I think the real problem here is that the nginx config being tested was invalid with conflicting `server` blocks. I removed all references to the `server_name` causing conflicts in that nginx configuration because both server blocks had other domains that are being tested, but I could add either back if you prefer. You can see the `nginx_compat` test passing with these changes at https://dev.azure.com/certbot/certbot/_build/results?buildId=2587&view=logs&j=250aa146-b243-5f8f-bf86-17a529c9fb7e. * update Dockerfile * Fix apache_compat on py3. * Update empty_cert.pem. The command used here was `openssl req -key certbot/certbot/tests/testdata/rsa2048_key.pem -new -subj '/CN=example.com' -x509 > certbot-compatibility-test/certbot_compatibility_test/testdata/empty_cert.pem`. * update nginx.tar.gz * Remove conflicting server_names
2020-09-09 18:16:52 -04:00
# We copy all contents of the build directory to allow us to easily use
# things like tools/venv3.py which expects all of our packages to be available.
COPY . .
Add certbot-compatibility-test Dockerfiles
2016-08-10 19:08:30 -04:00
Move compatibility tests off of certbot-auto and Python 2 (#8248) Fixes https://github.com/certbot/certbot/issues/8162. I had to update the base of the Dockerfile to get a new enough version of Python 3. I also simplified things a lot and removed a lot of the comments that were essentially just describing how Dockerfiles work. The most complicated changes here are in `testdata`. You can find a diff of the changes to `nginx.tar.gz` at https://gist.github.com/c7727db0cecf3f15f02439f085c73848. The first problem was that there were some complaints from the new Apache/nginx/OpenSSL version about the 1024 bit RSA key so I updated `empty_cert.pem` both inside and outside of the tarball as well as the corresponding private key in the tarball to use a 2048 bit key. The 2nd problem is trickier to understand. If you look at the output from nginx after loading the config from `lots/` you'll see it complaining about conflicting `server_name` directives for the directives I deleted. See https://dev.azure.com/certbot/certbot/_build/results?buildId=2578&view=logs&j=250aa146-b243-5f8f-bf86-17a529c9fb7e&t=9baa2014-9673-5e78-8f4f-7a463caf2bfa&l=1516. After switching the tests to Python 3, tests on that domain started failing. What I believe to be happening is we were just lucky these tests were passing to begin with. In both the Apache and Nginx plugin, if there are conflicting virtual hosts like this, we just arbitrarily pick one. The relevant code here for nginx is https://github.com/certbot/certbot/blob/575092d6030330ed8379babaa4cbbfe43e7bf721/certbot-nginx/certbot_nginx/_internal/configurator.py#L455 I played around with a debugger and confirmed that before I removed the conflicting server names, there were two exact matches for the domain we were searching for here. I think all that's going on is with the switch to Python 3, the vhost we happen to choose changes and "breaks" the test. I suspect this to be due to something like getting values out of a dict somewhere where the order of items in a dict while iterating over it is different between Python 2 and 3. I didn't track where this difference happens down, but I personally don't think it's a good use of time since I think the real problem here is that the nginx config being tested was invalid with conflicting `server` blocks. I removed all references to the `server_name` causing conflicts in that nginx configuration because both server blocks had other domains that are being tested, but I could add either back if you prefer. You can see the `nginx_compat` test passing with these changes at https://dev.azure.com/certbot/certbot/_build/results?buildId=2587&view=logs&j=250aa146-b243-5f8f-bf86-17a529c9fb7e. * update Dockerfile * Fix apache_compat on py3. * Update empty_cert.pem. The command used here was `openssl req -key certbot/certbot/tests/testdata/rsa2048_key.pem -new -subj '/CN=example.com' -x509 > certbot-compatibility-test/certbot_compatibility_test/testdata/empty_cert.pem`. * update nginx.tar.gz * Remove conflicting server_names
2020-09-09 18:16:52 -04:00
RUN tools/venv3.py
ENV PATH /opt/certbot/src/venv3/bin:$PATH
Add certbot-compatibility-test Dockerfiles
2016-08-10 19:08:30 -04:00
# install in editable mode (-e) to save space: it's not possible to
# "rm -rf /opt/certbot/src" (it's stays in the underlaying image);
# this might also help in debugging: you can "docker run --entrypoint
# bash" and investigate, apply patches, etc.
Make testdata the CWD of compatibility test dockerfiles
2016-08-10 19:32:38 -04:00
WORKDIR /opt/certbot/src/certbot-compatibility-test/certbot_compatibility_test/testdata
Reference in a new issue Copy permalink