The isc_buffer_allocate() function now cannot fail with ISC_R_MEMORY.
This commit removes all the checks on the return code using the semantic
patch from previous commit, as isc_buffer_allocate() now returns void.
hp implementation requires an object for each thread accessing
a hazard pointer. previous implementation had a hardcoded
HP_MAX_THREAD value of 128, which failed on machines with lots of
CPU cores (named uses 3n threads). We make isc__hp_max_threads
configurable at startup, with the value set to 4*named_g_cpus.
It's also important for this value not to be too big as we do
linear searches on a list.
the internal keytable structure has not yet been changed, but
insertion of DS anchors is the only method now available.
NOTE: the keytable unit test is currently failing because of tests
that expect individual keynode objects to contain single DST key
objects.
as initial-key and static-key trust anchors will now be stored as a
DS rrset, code referencing keynodes storing DNSKEY trust anchors will
no longer be reached.
- the socket stat counters have been moved from socket.h to stats.h.
- isc_nm_t now attaches to the same stats counter group as
isc_socketmgr_t, so that both managers can increment the same
set of statistics
- isc__nmsocket_init() now takes an interface as a paramter so that
the address family can be determined when initializing the socket.
- based on the address family and socket type, a group of statistics
counters will be associated with the socket - for example, UDP4Active
with IPv4 UDP sockets and TCP6Active with IPv6 TCP sockets. note
that no counters are currently associated with TCPDNS sockets; those
stats will be handled by the underlying TCP socket.
- the counters are not actually used by netmgr sockets yet; counter
increment and decrement calls will be added in a later commit.
Before this change, there was a missing blank line between the
negative trust anchors for one view, and the heading line for the next
view. This is because dns_ntatable_totext() omits the last newline.
There is an example of the incorrect output below; the fixed output
has a blank line before "Start view auth".
secure roots as of 21-Oct-2019 12:03:23.500:
Start view rec
Secure roots:
./RSASHA256/20326 ; managed
Negative trust anchors:
example.com: expiry 21-Oct-2019 13:03:15.000
Start view auth
Secure roots:
./RSASHA256/20326 ; managed
Negative trust anchors:
example.com: expiry 21-Oct-2019 13:03:07.000
Since the introduction of durations, all ttlval configuration types
are replaced with durations. Duration is an ISO 8601 duration, a
TTL-style value, or a number. These two references were missed and
are now also replaced.
This commit makes some minor changes to the trust anchor code:
1. Replace the undescriptive n1, n2 and n3 identifiers with slightly
better rdata1, rdata2, and rdata3.
2. Fix an occurrence where in the error log message a static number
32 was printed, rather than the rdata3 length.
3. Add a default case to the switch statement checking DS digest
algorithms to catch unknown algorithms.
Previously, the dns_geoip API used isc_thread_key API for TLS, which is
fairly complicated and requires initialization of memory contexts, etc.
This part of code was refactored to use a ISC_THREAD_LOCAL pointer which
greatly simplifies the whole code related to storing TLS variables, and
creating the local memory context was moved to named and stored in the
named_g_geoip global context.
Previously, the dns_dt API used isc_thread_key API for TLS, which is
fairly complicated and requires initialization of memory contexts, etc.
This part of code was refactored to use a ISC_THREAD_LOCAL pointer which
greatly simplifies the whole code related to storing TLS variables.
Previously, the dns_name API used isc_thread_key API for TLS, which is
fairly complicated and requires initialization of memory contexts, etc.
This part of code was refactored to use a ISC_THREAD_LOCAL pointer which
greatly simplifies the whole code related to storing TLS variables.
xmlInitThreads() and xmlCleanupThreads() are called from within
named_statschannels_configure() and named_statschannels_shutdown(),
respectively. Both of these functions are executed by worker threads,
not the main named thread. This causes ASAN to report memory leaks like
the following one upon shutdown (as long as named is asked to produce
any XML output over its configured statistics channels during its
lifetime):
Direct leak of 968 byte(s) in 1 object(s) allocated from:
#0 0x7f677c249cd8 in __interceptor_calloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:153
#1 0x7f677bc1838f in xmlGetGlobalState (/usr/lib/libxml2.so.2+0xa838f)
The data mentioned in the above report is a libxml2 state structure
stored as thread-specific data. Such chunks of memory are automatically
released (by a destructor passed to pthread_key_create() by libxml2)
whenever a thread that allocated a given chunk exits. However, if
xmlCleanupThreads() is called by a given thread before it exits, the
destructor will not be invoked (due to xmlCleanupThreads() calling
pthread_key_delete()) and ASAN will report a memory leak. Thus,
xmlInitThreads() and xmlCleanupThreads() must not be called from worker
threads. Since xmlInitThreads() must be called on Windows in order for
libxml2 to work at all, move xmlInitThreads() and xmlCleanupThreads()
calls to the main named thread (which does not produce any XML output
itself) in order to prevent the memory leak from being reported by ASAN.
Loaded GeoIP2 databases are only released when named is shut down, but
not during server reconfiguration. This causes memory to be leaked
every time "rndc reconfig" or "rndc reload" is used, as long as any
GeoIP2 database is in use. Fix by releasing any loaded GeoIP2 databases
before reloading them. Do not call dns_geoip_shutdown() until server
shutdown as that function releases the memory context used for caching
GeoIP2 lookup results.
The saved_command_line buffer in bin/named/main.c is 8192 bytes long.
The size of libisc's internal logging buffer (defined by the value of
the LOG_BUFFER_SIZE constant in lib/isc/log.c) is also 8192 bytes.
Since the buffer containing the ellipsis is passed as the last argument
to isc_log_write() and the buffer containing the potentially trimmed
named command line (saved_command_line) is passed as the second argument
in the same isc_log_write() call, it may happen that saved_command_line
will exhaust all available space in libisc's internal logging buffer, in
which case the ellipsis will be elided from the output.
Make saved_command_line 4096 bytes long as that value is arguably also
large enough for any reasonable use case and at the same time it ensures
ellipsis will always be printed for excessively long named command
lines.
When loading the configuration fails, there might be already other tasks
running and calling OpenSSL library functions. The OpenSSL on_exit
handler is called when exiting the main process and there's a timing
race between the on_exit function that destroys OpenSSL allocated
resources (threads, locks, ...) and other tasks accessing the very same
resources leading to a crash in the system threading library. Therefore,
the fatal() function needs to request exlusive access to the task
manager to finish the already running tasks and exit only when no other
tasks are running.
- restore support for tcp-initial-timeout, tcp-idle-timeout,
tcp-keepalive-timeout and tcp-advertised-timeout configuration
options, which were ineffective previously.
note: this also needs further refactoring.
- when initializing RFC 5011 for a name, we populate the managed-keys
zone with KEYDATA records derived from the initial-key trust anchors.
however, with initial-ds trust anchors, there is no key. but the
managed-keys zone still must have a KEYDATA record for the name,
otherwise zone_refreshkeys() won't refresh that key. so, for
initial-ds trust anchors, we now add an empty KEYDATA record and set
the key refresh timer so that the real keys will be looked up as soon
as possible.
- when a key refresh query is done, we verify it against the
trust anchor; this is done in two ways, one with the DS RRset
set up during configuration if present, or with the keys linked
from each keynode in the list if not. because there are two different
verification methods, the loop structure is overly complex and should
be simplified.
- the keyfetch_done() and sync_keyzone() functions are both too long
and should be broken into smaller functions.
note: this is a frankensteinian kluge which needs further refactoring.
the keytable started as an RBT where the node->data points to a list of
dns_keynode structures, each of which points to a single dst_key.
later it was modified so that the list could instead point to a single
"null" keynode structure, which does not reference a key; this means
a trust anchor has been configured but the RFC 5011 refresh failed.
in this branch it is further updated to allow the first keynode in
the list to point to an rdatalist of DS-style trust anchors. these will
be used by the validator to populate 'val->dsset' when validating a zone
key.
a DS style trust anchor can be updated as a result of RFC 5011
processing to contain DST keys instead; this results in the DS list
being freed. the reverse is not possible; attempting to add a DS-style
trust anchor if a key-style trust anchor is already in place results
in an error.
later, this should be refactored to use rdatalists for both DS-style
and key-style trust anchors, but we're keeping the existing code for
old-style trust anchors for now.
- ns__client_request() is now called by netmgr with an isc_nmhandle_t
parameter. The handle can then be permanently associated with an
ns_client object.
- The task manager is paused so that isc_task events that may be
triggred during client processing will not fire until after the netmgr is
finished with it. Before any asynchronous event, the client MUST
call isc_nmhandle_ref(client->handle), to prevent the client from
being reset and reused while waiting for an event to process. When
the asynchronous event is complete, isc_nmhandle_unref(client->handle)
must be called to ensure the handle can be reused later.
- reference counting of client objects is now handled in the nmhandle
object. when the handle references drop to zero, the client's "reset"
callback is used to free temporary resources and reiniialize it,
whereupon the handle (and associated client) is placed in the
"inactive handles" queue. when the sysstem is shutdown and the
handles are cleaned up, the client's "put" callback is called to free
all remaining resources.
- because client allocation is no longer handled in the same way,
the '-T clienttest' option has now been removed and is no longer
used by any system tests.
- the unit tests require wrapping the isc_nmhandle_unref() function;
when LD_WRAP is supported, that is used. otherwise we link a
libwrap.so interposer library and use that.
When a task manager is created, we can now specify an `isc_nm`
object to associate with it; thereafter when the task manager is
placed into exclusive mode, the network manager will be paused.
'dnssec-policy' can now also be set on the options and view level and
a zone that does not set 'dnssec-policy' explicitly will inherit it
from the view or options level.
This requires a new keyword to be introduced: 'none'. If set to
'none' the zone will not be DNSSEC maintained, in other words it will
stay unsigned. You can use this to break the inheritance. Of course
you can also break the inheritance by referring to a different
policy.
The keywords 'default' and 'none' are not allowed when configuring
your own dnssec-policy statement.
Add appropriate tests for checking the configuration (checkconf)
and add tests to the kasp system test to verify the inheritance
works.
Edit the kasp system test such that it can deal with unsigned zones
and views (so setting a TSIG on the query).
Update the signing code in lib/dns/zone.c and lib/dns/update.c to
use kasp logic if a dnssec-policy is enabled.
This means zones with dnssec-policy should no longer follow
'update-check-ksk' and 'dnssec-dnskey-kskonly' logic, instead the
KASP keys configured dictate which RRset gets signed with what key.
Also use the next rekey event from the key manager rather than
setting it to one hour.
Mark the zone dynamic, as otherwise a zone with dnssec-policy is
not eligble for automatic DNSSEC maintenance.
If a zone has a dnssec-policy set, use signature validity,
dnskey signature validity, and signature refresh from
dnssec-policy.
Zones configured with 'dnssec-policy' will allow 'named' to create
DNSSEC keys (similar to dnssec-keymgr) if not available.
When doing rollover in a timely manner we need to have access to the
relevant kasp configured durations.
Most of these are simple get functions, but 'dns_kasp_signdelay'
will calculate the maximum time that is needed with this policy to
resign the complete zone (taking into account the refresh interval
and signature validity).
Introduce parent-propagation-delay, parent-registration-delay,
parent-ds-ttl, zone-max-ttl, zone-propagation-delay.
This commit introduces the initial `dnssec-policy` configuration
statement. It has an initial set of options to deal with signature
and key maintenance.
Add some checks to ensure that dnssec-policy is configured at the
right locations, and that policies referenced to in zone statements
actually exist.
Add some checks that when a user adds the new `dnssec-policy`
configuration, it will no longer contain existing DNSSEC
configuration options. Specifically: `inline-signing`,
`auto-dnssec`, `dnssec-dnskey-kskonly`, `dnssec-secure-to-insecure`,
`update-check-ksk`, `dnssec-update-mode`, `dnskey-sig-validity`,
and `sig-validity-interval`.
Test a good kasp configuration, and some bad configurations.
The ttlval configuration types are replaced by duration configuration
types. The duration is an ISO 8601 duration that is going to be used
for DNSSEC key timings such as key lifetimes, signature resign
intervals and refresh periods, etc. But it is also still allowed to
use the BIND ttlval ways of configuring intervals (number plus
optional unit).
A duration is stored as an array of 7 different time parts.
A duration can either be expressed in weeks, or in a combination of
the other datetime indicators.
Add several unit tests to ensure the correct value is parsed given
different string values.
This variable will report the maximum number of simultaneous tcp clients
that BIND has served while running.
It can be verified by running rndc status, then inspect "tcp high-water:
count", or by generating statistics file, rndc stats, then inspect the
line with "TCP connection high-water" text.
The tcp-highwater variable is atomically updated based on an existing
tcp-quota system handled in ns/client.c.
The named_g_defaultdnstap was never used as the dnstap requires
explicit configuration of the output file.
Related scan-build report:
./server.c:3476:14: warning: Value stored to 'dpath' during its initialization is never read
const char *dpath = named_g_defaultdnstap;
^~~~~ ~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
