Add an option to enable/disable inline-signing inside the
dnssec-policy clause. The existing inline-signing option that is
set in the zone clause takes priority, but if it is omitted, then the
value that is set in dnssec-policy is taken.
The built-in policies use inline-signing.
This means that if you want to use the default policy without
inline-signing you either have to set it explicitly in the zone
clause:
zone "example" {
...
dnssec-policy default;
inline-signing no;
};
Or create a new policy, only overriding the inline-signing option:
dnssec-policy "default-dynamic" {
inline-signing no;
};
zone "example" {
...
dnssec-policy default-dynamic;
};
This also means that if you are going insecure with a dynamic zone,
the built-in "insecure" policy needs to be accompanied with
"inline-signing no;".
These two configuration options worked in conjunction with 'auto-dnssec'
to determine KSK usage, and thus are now obsoleted.
However, in the code we keep KSK processing so that when a zone is
reconfigured from using 'dnssec-policy' immediately to 'none' (without
going through 'insecure'), the zone is not immediately made bogus.
Add one more test case for going straight to none, now with a dynamic
zone (no inline-signing).
Add a new configuration option to set how the checkds method should
work. Acceptable values are 'yes', 'no', and 'explicit'.
When set to 'yes', the checkds method is to lookup the parental agents
by querying the NS records of the parent zone.
When set to 'no', no checkds method is enabled. Users should run
the 'rndc checkds' command to signal that DS records are published and
withdrawn.
When set to 'explicit', the parental agents are explicitly configured
with the 'parental-agents' configuration option.
for testing purposes, we need to be able to specify a library path from
which to load the dnsrps implementation. this can now be done with the
"dnsrps-library" option.
DNSRPS can now be enabled in configure regardless of whether librpz.so
is currently installed on the system.
These options and zone type were created to address the
SiteFinder controversy, in which certain TLD's redirected queries
rather than returning NXDOMAIN. since TLD's are now DNSSEC-signed,
this is no longer likely to be a problem.
The deprecation message for 'type delegation-only' is issued from
the configuration checker rather than the parser. therefore,
isccfg_check_namedconf() has been modified to take a 'nodeprecate'
parameter to suppress the warning when named-checkconf is used with
the command-line option to ignore warnings on deprecated options (-i).
Completely remove the TKEY Mode 2 (Diffie-Hellman Exchanged Keying) from
BIND 9 (from named, named.conf and all the tools). The TKEY usage is
fringe at best and in all known cases, GSSAPI is being used as it should.
The draft-eastlake-dnsop-rfc2930bis-tkey specifies that:
4.2 Diffie-Hellman Exchanged Keying (Deprecated)
The use of this mode (#2) is NOT RECOMMENDED for the following two
reasons but the specification is still included in Appendix A in case
an implementation is needed for compatibility with old TKEY
implementations. See Section 4.6 on ECDH Exchanged Keying.
The mixing function used does not meet current cryptographic
standards because it uses MD5 [RFC6151].
RSA keys must be excessively long to achieve levels of security
required by current standards.
We might optionally implement Elliptic Curve Diffie-Hellman (ECDH) key
exchange mode 6 if the draft ever reaches the RFC status. Meanwhile the
insecure DH mode needs to be removed.
- removed documentation of -S option from named man page
- removed documentation of reserved-sockets from ARM
- simplified documentation of dnssec-secure-to-insecure - it
now just says it's obsolete rather than describing what it
doesn't do anymore
- marked three formerly obsolete options as ancient:
parent-registration-delay, reserved-sockets, and
suppress-initial-notify
the built-in trust anchors in named and delv are sufficent for
validation. named still needs to be able to load trust anchors from
a bind.keys file for testing purposes, but it doesn't need to be
the default behavior.
we now only load trust anchors from a file if explicitly specified
via the "bindkeys-file" option in named or the "-a" command line
argument to delv. documentation has been cleaned up to remove references
to /etc/bind.keys.
Closes#3850.
A 'tls' statement can be specified both for individual addresses
and for the whole list (as a default value when an individual
address doesn't have its own 'tls' set), just as it was done
before for the 'port' value.
Create a new function 'print_rawqstring()' to print a string residing
in a 'isc_textregion_t' type parameter.
Create a new function 'copy_string()' to copy a string from a
'cfg_obj_t' object into a 'isc_textregion_t'.
Deprecate the use of "port" when configuring query-source(-v6),
transfer-source(-v6), notify-source(-v6), parental-source(-v6),
etc. Also deprecate use-{v4,v6}-udp-ports and avoid-{v4,v6}udp-ports.
DSCP has not been fully working since the network manager was
introduced in 9.16, and has been completely broken since 9.18.
This seems to have caused very few difficulties for anyone,
so we have now marked it as obsolete and removed the
implementation.
To ensure that old config files don't fail, the code to parse
dscp key-value pairs is still present, but a warning is logged
that the feature is obsolete and should not be used. Nothing is
done with configured values, and there is no longer any
range checking.
Add a new way to configure the preferred source address when talking to
remote servers such as primaries and parental-agents. This will
eventually deprecate options such as 'parental-source',
'parental-source-v6', 'transfer-source', etc.
Example of the new configuration:
parental-agents "parents" port 5353 \
source 10.10.10.10 port 5354 dscp 54 \
source-v6 2001:db8::10 port 5355 dscp 55 {
10.10.10.11;
2001:db8::11;
};
After deprecating the operating system limits settings (coresize,
datasize, files and stacksize), mark them as ancient and remove the code
that sets the values from config.
It was possible to set operating system limits (RLIMIT_DATA,
RLIMIT_STACK, RLIMIT_CORE and RLIMIT_NOFILE) from named.conf. It's
better to leave these untouched as setting these is responsibility of
the operating system and/or supervisor.
Deprecate the configuration options and remove them in future BIND 9
release.
Implement the configuration option with its checking and parsing parts.
The option should be later used by BIND to set an extended error
code (EDE) for the queries modified in the result of RPZ processing.
The "max-zone-ttl" option should now be configured as part of
"dnssec-policy". The option with the same name in "zone" and
"options" is hereby flagged as deprecated, and its functionality
will be removed in a future release.
It would be too easy if we could just call sorted(). Thanks to zone
grammar the most important key "type" gets sorted near end, so we pull
it up to the top using a hack.
It turns out the tree of dictionaries is not the best structure to
represent our grammar, unfortunatelly. The problem is that "zone" has
several context-dependent variants which change meaning of "zone" based
on inner field "type".
Redesigning the whole structure does not seem to be worth, so I settled
on this terrible hack.
The utility detects statements which use the same name (e.g.
max-zone-ttl) but use different grammar in different contexts. These
typically need special case in docs.
It transforms named.conf/rndc.conf grammar from text format into Python
dictionary. This allows granular access to grammar elements.
Beware: It heavity depens on cfg_test output format!
The next commit is going to add parser for ISC configuration format.
To simplify the parser the grammar files in doc/misc are no longer
line-wrapped as handling it would make the grammar parser unnecessairly
complicated.
This affects visible output in the ARM, but in the end we are going to
replace the auto-generated .rst files with grammar pretty printed, so
formatting of these files does not matter in practical terms.
The "glue-cache" option was marked as deprecated by commit
5ae33351f2 (first released in BIND 9.17.6,
back in October 2020), so now obsolete that option, removing all code
and documentation related to it.
Note: this causes the glue cache feature to be permanently enabled, not
disabled.
After some back and forth, it was decidede to match the configuration
option with unbound ("so-reuseport"), PowerDNS ("reuseport") and/or
nginx ("reuseport").
Previously, the option to enable kernel load balancing of the sockets
was always enabled when supported by the operating system (SO_REUSEPORT
on Linux and SO_REUSEPORT_LB on FreeBSD).
It was reported that in scenarios where the networking threads are also
responsible for processing long-running tasks (like RPZ processing, CATZ
processing or large zone transfers), this could lead to intermitten
brownouts for some clients, because the thread assigned by the operating
system might be busy. In such scenarious, the overall performance would
be better served by threads competing over the sockets because the idle
threads can pick up the incoming traffic.
Add new configuration option (`load-balance-sockets`) to allow enabling
or disabling the load balancing of the sockets.
Commit 4ca74eee49 update the zone grammar
such that the zone statement is printed with the valid options per
zone type.
This commit is a follow-up, putting back the ZONE heading and adding
a note that these zone statements may also be put inside the view
statement.
It is tricky to actually print the zone statements inside
the view statement, and so we decided that we would add a note to say
that this is possible.
Building BIND 9 with older version of BIND 9 installed would result in
build failure. Fix the last two remaining cases where <prog>_CFLAGS was
being used leading to wrong order of the build flags on the command line.
the "zone" clause can be documented using, for instance,
`cfg_test --zonegrammar primary", which prints only
options that are valid in primary zones. this was not
the method being used when generating the named.conf
man page; instead, "zone" was documented with all possible
options, and no zone types at all.
this commit removes "zone" from the generic documentation
and adds include statements in named.conf.rst so that
correct zone grammars will be included in the man page.
"masters" and "default-masters" are now flagged so they will
not be included in the named.conf man page, despite being
accepted as valid options by the parser for backward
compatibiility.
The keep-response-order option has been introduced when TCP pipelining
has been introduced to BIND 9 as a failsafe for possibly non-compliant
clients.
Declare the keep-response-order obsolete as all DNS clients should
either support out-of-order processing or don't send more DNS queries
until the DNS response for the previous one has been received.
Replace the hard-coded paths for various BIND 9 files (configuration,
pid, etc.) in the man pages and ARM with compile-time values using the
sphinx-build replace system.
This is more complicated, because the restructured text specification
doesn't allow |substitions| inside ``code-blocks``, so for each specific
file we had to create own substition which is sub-optimal, but it is
only way how to do this without adding Sphinx extension.
Formerly parental-agents grammar was an exception and it did not
auto-generate itself from source code. From now on it is generated using
the same mechanism as other grammars.
For consistency with rest of the system, I've also renamed the grammar
file and the link anchors from "parentals" to "parental-agents".
Technically this is fixup for commit
0311705d4b.
Related: !5234
The missing `::` in the .rst files caused grammar section in docs to
render empty.
The `::` was accidentally removed in an unrelated commit
58bd26b6cf which was supposed to update
only copyright headers.
Fixes: #3120
As far as I can tell, it is some leftover from the times when Sphinx
docs were introduced (commit 9fb6d11abb).
It seems like it is not referenced from anywhere.
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
It's unclear if we are going to keep it or not, so let's mark it as
deprecated for a good measure. It's easier to un-deprecate it than the
other way around.
A number of DNS implementation produce NSEC records with bad type
maps that don't contain types that exist at the name leading to
NODATA responses being synthesize instead of the records in the
zone. NSEC records with these bad type maps often have the NSEC
NSEC field set to '\000.QNAME'. We look for the first label of
this pattern.
e.g.
example.com NSEC \000.example.com SOA NS NSEC RRSIG
example.com RRRSIG NSEC ...
example.com SOA ...
example.com RRRSIG SOA ...
example.com NS ...
example.com RRRSIG NS ...
example.com A ...
example.com RRRSIG A ...
A is missing from the type map.
This introduces a temporary option 'reject-000-label' to control
this behaviour.
'server <prefix> { broken-nsec yes; };' can now be used to stop
NSEC records from negative responses from servers in the given
prefix being cached and hence available to synth-from-dnssec.
This commit extends ACL syntax handling code with 'port' and
'transport' options. Currently, the extended syntax is available only
for allow-transfer options.
This commit disables the unused 'tls' clause options. For these some
backing code exists, but their values are not really used anywhere,
nor there are sufficient syntax tests for them.
These options are only disabled temporarily, until TLS certificate
verification gets implemented.
The new rules compare the target name in PTR and SRV records against
the machine name embedded in the kerberos principal. This can be
used to further restrict what PTR and SRV records can be added or
deleted via dynamic updates if desired.
Replace some "master/slave" terminology in the code with the preferred
"primary/secondary" keywords. This also changes user output such as
log messages, and fixes a typo ("seconary") in cfg_test.c.
There are still some references to "master" and "slave" for various
reasons:
- The old syntax can still be used as a synonym.
- The master syntax is kept when it refers to master files and formats.
- This commit replaces mainly keywords that are local. If "master" or
"slave" is used in for example a structure that is all over the
place, it is considered out of scope for the moment.
The documentation and feature-test were using '--with-idn' but the
configure script doesn't recognize this option. The correct option to
enable IDN support is '--with-libidn2'.
This commit adds the ability to enable or disable stateless TLS
session resumption tickets (see RFC5077). Having this ability is
twofold.
Firstly, these tickets are encrypted by the server, and the algorithm
might be weaker than the algorithm negotiated during the TLS session
establishment (it is in general the case for TLSv1.2, but the generic
principle applies to TLSv1.3 as well, despite it having better ciphers
for session tickets). Thus, they might compromise Perfect Forward
Secrecy.
Secondly, disabling it might be necessary if the same TLS key/cert
pair is supposed to be used by multiple servers to achieve, e.g., load
balancing because the session ticket by default gets generated in
runtime, while to achieve successful session resumption ability, in
this case, would have required using a shared key.
The proper alternative to having the ability to disable stateless TLS
session resumption tickets is to implement a proper session tickets
key rollover mechanism so that key rotation might be performed
often (e.g. once an hour) to not compromise forward secrecy while
retaining the associated performance benefits. That is much more work,
though. On the other hand, having the ability to disable session
tickets allows having a deployable configuration right now in the
cases when either forward secrecy is wanted or sharing the TLS
key/cert pair between multiple servers is needed (or both).
This commit adds support for enforcing the preference of server
ciphers over the client ones. This way, the server attains control
over the ciphers priority and, thus, can choose more strong cyphers
when a client prioritises less strong ciphers over the more strong
ones, which is beneficial when trying to achieve Perfect Forward
Secrecy.
This commit adds support for setting TLS cipher list string in the
format specified in the OpenSSL
documentation (https://www.openssl.org/docs/man1.1.1/man1/ciphers.html).
The syntax of the cipher list is verified so that specifying the wrong
string will prevent the configuration from being loaded.
This commit adds support for loading DH-parameters (Diffie-Hellman
parameters) via the new "dhparam-file" option within "tls" clause. In
particular, Diffie-Hellman parameters are needed to enable the range
of forward-secrecy enabled cyphers for TLSv1.2, which are getting
silently disabled otherwise.
This commit adds the ability to specify allowed TLS protocols versions
within the "tls" clause. If an unsupported TLS protocol version is
specified in a file, the configuration file will not pass
verification.
Also, this commit adds strict checks for "tls" clauses verification,
in particular:
- it ensures that loading configuration files containing duplicated
"tls" clauses is not allowed;
- it ensures that loading configuration files containing "tls" clauses
missing "cert-file" or "key-file" is not allowed;
- it ensures that loading configuration files containing "tls" clauses
named as "ephemeral" or "none" is not allowed.
"cache-file" was already documented as intended for testing
purposes only and not to be used, so we can remove it without
waiting. this commit marks the option as "ancient", and
removes all the documentation and implementing code, including
dns_cache_setfilename() and dns_cache_dump().
it also removes the documentation for the '-x cachefile`
parameter to named, which had already been removed, but the man
page was not updated at the time.
