Move all test cases from tests.sh to tests_ksr.py. The only test that
is not moved is the check that key id's match expected keys. The
shell-based system test checks two earlier set environment variables
against each other that has become redundant in the pytest variant,
because we now check the signed key response against a list of keys
and for each key we take into account the timing metadata. So we
already ensure that each published key is in the correct key bundle.
Write initial pytest kasp library. This contains everything that is
required for testing Offline KSK functionality with pytest.
This includes:
- addtime: adding a value to a timing metadata
- get_timing_metdata: retrieve timing metadata from keyfile
- get_metadata/get_keystate: retrieve metadata from statefile
- get_keytag: retrieve keytag from base keyfile string
- get_keyrole: get key role from statefile
- dnskey_equals: compare DNSKEY record from file against a string
- cds_equals: compare CDS derived from file against a string
- zone_is_signed: wait until a zone is completely signed
- dnssec_verify: verify a DNSSEC signed zone with dnssec-verify
- check_dnssecstatus: check rndc dnssec -status output
- check_signatures: check that signatures for a given RRset are correct
- check_dnskeys: check that the published DNSKEY RRset is correct
- check_cds: check that the published CDS RRset is correct
- check_apex: check SOA, DNSKEY, CDNSKEY, and CDS RRset
- check_subdomain: check an RRset below the apex
CookieOption with new .server/.client attributes (rather than .data) was
added to dnspython. Adjust the code to use the new attributes if
available and fall back to the old code for dnspython<2.7.0
compatibility.
there was no system test that exercised 'rndc recursing'; a
simple one has now been added; it confirms that the number of
recursing clients reported by 'rndc stats' is in agreement with
the list returned by 'rndc recursing'.
In a multi-signer setup, removing DNSKEY records from the zone should
not be treated as a key that previously exists in the keyring, thus
blocking the keymgr. Add a test case to make sure.
Test that if a key to be purged is in the keyring, it does not
prevent the keymgr from running. Normally a key that is in the keyring
should be available again on the next run, but that is not true for
a key that can be purged.
In addition, fix some wait_for_log calls, by adding the missing
'|| ret=1' parts.
Some test cases were working but for the wrong reasons. These started
to fail when I implemented the first approach for #4763, where the
existence of a DNSKEY together with an empty keyring is suspicious and
would prevent the keymgr from running.
These are:
1. kasp: The multisigner-model2.kasp zone has ZSKs from other providers
in the zone, but not yet its own keys. Pregenerate signing keys and
add them to the unsigned zone as well.
2. kasp: The dynamic-signed-inline-signing.kasp zone has a key generated
and added in the raw version of the zone. But the key file is stored
outside the key-directory for the given zone. Add '-K keys' to the
dnssec-keygen command.
Prior to running the keymgr, first make sure that existing keys
are present in the new keylist. If not, treat this as an operational
error where the keys are made offline (temporarily), possibly unwanted.
In this specific case the key files are temporary unavailable, for
example because of an operator error, or a mount failure). In such
cases, BIND should not try to roll over these keys.
The dns_dispatch_add() function registers the 'resp' entry in
'disp->mgr->qids' hash table with 'resp->port' being 0, but in
tcp_recv_success(), when looking up an entry in the hash table
after a successfully received data the port is used, so if the
local port was set (i.e. it was not 0) it fails to find the
entry and results in an unexpected error.
Set the 'resp->port' to the given local port value extracted from
'disp->local'.
This commit adds support for timestamps in iso8601 format with timezone
when logging. This is exposed through the iso8601-tzinfo printtime
suboption.
It also makes the new logging format the default for -g output,
hopefully removing the need for custom timestamp parsing in scripts.
Check that with a preexisting dump file without a write permission
no actual dump happens, and rndc returns an error result.
Also add a couple of missing entries in the cleaning script.
The shutdown system test sends queries when named is shutting down, not
in an attempt to get answers but to destabilize the server into a crash.
With isctest.query.udp() defaulting to try up to ten times with a
ten-second timeout to get a response we don't care about from a likely
terminated server, we make the test run much longer than needed because
of retries and long timeouts.
DNSRPS was the API for a commercial implementation of Response-Policy
Zones that was supposedly better. However, it was never open-sourced
and has only ever been available from a single vendor. This goes against
the principle that the open-source edition of BIND 9 should contain only
features that are generally available and universal.
This commit removes the DNSRPS implementation from BIND 9. It may be
reinstated in the subscription edition if there's enough interest from
customers, but it would have to be rewritten as a plugin (hook) instead
of hard-wiring it again in so many places.
Check that the fix in the previous commit works and that the
'ServerQuota' counter in the statistics channel is still unset
after a SERVFAIL result in a 'forward only' zone.
Remove the use of "port" when configuring query-source(-v6),
transfer-source(-v6), notify-source(-v6), parental-source(-v6),
etc. Remove the use of source ports for parental-agents.
Also remove the deprecated options use-{v4,v6}-udp-ports and
avoid-{v4,v6}udp-ports.
This change allows fallback from an IXFR failure to AXFR when the
reason is DNS_R_TOOMANYRECORDS. This is because this error condition
could be temporary only in an intermediate version of IXFR
transactions and it's possible that the latest version of the zone
doesn't have that condition. In such a case, the secondary would never
be able to update the zone (even if it could) without this fallback.
This fallback behavior is particularly useful with the recently
introduced max-records-per-type and max-types-per-name options:
the primary may not have these limitations and may temporarily
introduce "too many" records, breaking IXFR. If the primary side
subsequently deletes these records, this fallback will help recover
the zone transfer failure automatically; without it, the secondary
side would first need to increase the limit, which requires more
operational overhead and has its own adverse effect.
This change also fixes a minor glitch that DNS_R_TOOMANYRECORDS wasn't
logged in xfrin_fail.
Administrators may wish to constrain the set of cores that BIND 9 runs
on via the 'taskset', 'cpuset' or 'numactl' programs (or equivalent on
other O/S), for example to achieve higher (or more stable) performance
by more closely associating threads with individual NIC rx queues. If
the admin has used taskset, it follows that BIND ought to
automatically use the given number of CPUs rather than the system wide
count.
Co-Authored-By: Ray Bellis <ray@isc.org>
With max-recursion-queries set to 50 the resolver system test was
unstable in the "checking query resolution for a domain with a valid
glueless delegation chain" check as ns1 replied with SERVFAIL.
Return partial match from dns_db_find/dns_db_find when requested
to short circuit the closest encloser discover process. Most of the
time this will be the actual closest encloser but may not be when
there yet to be committed / cleaned up versions of the zone with
names below the actual closest encloser.
Configure a maximum of 3 allowed differences and add 5 new records.
Check that named detected that the differences exceed the allowed
limit and successfully retries with AXFR.
This limits the maximum number of received incremental zone
transfer differences for a secondary server. Upon reaching the
confgiured limit, the secondary aborts IXFR and initiates a full
zone transfer (AXFR).
If there is a keytag conflict between keys with different algorithms,
we need to supply what key algorithm is used so we can get the right
public key.
For clarity, print the algorithm on the found keys after 'check_keys'.
Test importing a Signed Key Response. Files should be loaded and once
loaded the correct bundle should be used. Alsoe test cases where the
bundle is not the first bundle in the SKR.
Prepare the system test for tests that require a server to import
created SKR files. This means the test script needs adjustments to
take into account the directory test files are located.
In addition, the check_keys function is renamed to ksr_check_keys
because the name clashes with check_keys from kasp.sh. It also has an
extra parameter added, offset, that can be used to check ksr files that
are created in the past or future.
Add a new configuration option to enable Offline KSK key management.
Offline KSK cannot work with CSK because it splits how keys with the
KSK and ZSK role operate. Therefore, one key cannot have both roles.
Add a configuration check to ensure this.
The new
isc_log_createandusechannel() function combines following calls:
isc_log_createchannel()
isc_log_usechannel()
calls into a single call that cannot fail and therefore can be used in
places where we know this cannot fail thus simplifying the error
handling.
Remove the complicated mechanism that could be (in theory) used by
external libraries to register new categories and modules with
statically defined lists in <isc/log.h>. This is similar to what we
have done for <isc/result.h> result codes. All the libraries are now
internal to BIND 9, so we don't need to provide a mechanism to register
extra categories and modules.
Add isc_logconfig_get() function to get the current logconfig and use
the getter to replace most of the little dancing around setting up
logging in the tools. Thus:
isc_log_create(mctx, &lctx, &logconfig);
isc_log_setcontext(lctx);
dns_log_setcontext(lctx);
...
...use lcfg...
...
isc_log_destroy();
is now only:
logconfig = isc_logconfig_get(lctx);
...use lcfg...
For thread-safety, isc_logconfig_get() should be surrounded by RCU read
lock, but since we never use isc_logconfig_get() in threaded context,
the only place where it is actually used (but not really needed) is
named_log_init().
The test_traffic_json and test_traffic_xml occasionally fail when
running under TSAN. This happens in CI and is most likely a result of
some instability that doesn't seem to be easily reproduced.
Some distributions (notably, debian bookworm) have deprecated the
`python` interpreter in favor of `python3`. Since our scripts are
python3 anyway, use the proper numbered version in shebang to make
scripts easily executable.
Catalog zone member zones should be reconfigured as all the other
zones during a reconfiguration. Test it by checking whether the newly
added allow-query setting affects a member zone.
implement, document, and test the 'max-query-restarts' option
which specifies the query restart limit - the number of times
we can follow CNAMEs before terminating resolution.
the number of steps that can be followed in a CNAME chain
before terminating the lookup has been reduced from 16 to 11.
(this is a hard-coded value, but will be made configurable later.)
Instead of calling dst_lib_init() and dst_lib_destroy() explicitly by
all the programs, create a separate memory context for the DST subsystem
and use the library constructor and destructor to initialize the DST
internals.
Since the support for OpenSSL Engines has been removed, we can now also
remove the checks for OPENSSL_API_LEVEL; The OpenSSL 3.x APIs will be
used when compiling with OpenSSL 3.x, and OpenSSL 1.1.xx APIs will be
used only when OpenSSL 1.1.x is used.
The OpenSSL 1.x Engines support has been deprecated in the OpenSSL 3.x
and is going to be removed. Remove the OpenSSL Engine support in favor
of OpenSSL Providers.
dns_difftuple_create() could only return success, so change
its type to void and clean up all the calls to it.
other functions that only returned a result value because of it
have been cleaned up in the same way.
Since the minimal OpenSSL version is now OpenSSL 1.1.1, remove all kind
of OpenSSL shims and checks for functions that are now always present in
the OpenSSL libraries.
Co-authored-by: Ondřej Surý <ondrej@isc.org>
Co-authored-by: Aydın Mercan <aydin@isc.org>
Add a system test that sets TSIG fudge to 0, waits three seconds and
then sends signed message to the server. This tests the path where the
time difference between the client and the server is outside of the TSIG
fudge value.
The system tests were overriding the local locale by setting LANG to C.
This does not override the locale in case there are individual LC_<*>
variables like LC_CTYPE explicitly set.
Use LC_ALL=C instead which is the proper way of overriding all currently
set locales.
Use a big zone and the slow transfer mode. Initiate a retransfer, wait
several seconds, then initiate a retransfer using a '-force' argument,
which should cancel the previous transfer and start a new one.
Update the CNAME chain test to correspond to the changed behavior,
because now named returns SERVFAIL when hitting the maximum query
restarts limit (e.g. happening when following a long CNAME chain).
In the current test auth will hit the limit and return partial data
with a SERVFAIL code, while the resolver will return no data with
a SERVFAIL code after auth returns SERVFAIL to it.
Ensure all the variables are initialized when running the main function
of isctest module. This enables proper environment variables during test
script development when only conf.sh is sourced, rather than the script
being executed by the pytest runner.
Run the crypto support checks when initializing the isctest package and
save those results in environment variable. This removes the need to
repeatedly check for crypto operation support, as it's not something
that would change at test runtime.
Instead of invoking get_algorithms.py script repeatedly (which may yield
different results), move the algorithm configuration to an isctest
module. This ensures the variables are consistent across the entire test
run.
The updatecheck-kskonly.secure zone is being used to test dynamic
updates while the KSK is offline. It ensures that the DNSKEY RRset
will retain the RRSIG record, while the updated data is being signed
with the currently active ZSK.
When walking through ZSK rollovers, ensure that the newest ZSK (ZSK3)
is published before doing the dynamic update, preventing timing
related test failures.
Also fix the test log line ($ZSK_ID3 was not yet created at the time
of logging).
The key lifetime should no longer be adjusted if the key is being
retired earlier, for example because a manual rollover was started.
This would falsely be seen as a dnssec-policy lifetime reconfiguration,
and would adjust the retire/removed time again.
This also means we should update the status output, and the next
rollover scheduled is now calculated using (retire-active) instead of
key lifetime.
In order to protect from a malicious DNS client that sends many
queries with a SIG(0)-signed message, add a quota of simultaneously
running SIG(0) checks.
This protection can only help when named is using more than one worker
threads. For example, if named is running with the '-n 4' option, and
'sig0checks-quota 2;' is used, then named will make sure to not use
more than 2 workers for the SIG(0) signature checks in parallel, thus
leaving the other workers to serve the remaining clients which do not
use SIG(0)-signed messages.
That limitation is going to change when SIG(0) signature checks are
offloaded to "slow" threads in a future commit.
The 'sig0checks-quota-exempt' ACL option can be used to exempt certain
clients from the quota requirements using their IP or network addresses.
The 'sig0checks-quota-maxwait-ms' option is used to define a maximum
amount of time for named to wait for a quota to appear. If during that
time no new quota becomes available, named will answer to the client
with DNS_R_REFUSED.
kasp-max-types-per-name (named2.conf.in):
An unsigned zone with RR type count on a name right below the
configured limit. Then sign the zone using KASP. Adding a RRSIG would
push it over the RR type limit per name. Signing should fail, but
the server should not crash, nor end up in infinite resign-attempt loop.
kasp-max-records-per-type-dnskey (named1.conf.in):
Test with low max-record-per-rrset limit and a DNSSEC policy requiring
more than the limit. Signing should fail.
kasp-max-types-per-name (named1.conf.in):
Each RRSIG(covered type) is counted as an individual RR type. Test the
corner case where a signed zone, which is just below the limit-1,
adds a new type - doing so would trigger signing for the new type and
thus increase the number of "types" by 2, pushing it over the limit
again.
Add two new masterformat tests that use signing. In the case of
'under-limit-kasp', the signing will keep the number of records in the
RRset under the limit. In the case of 'on-limit-kasp', the signing
will push the number of records in the RRset over the limit, because
of the added RRSIG record.
Send a recursive query for a large number of RRsets, which should
fail when using the default max-types-per-name setting of 100, but
succeed when the cap is disabled.
Send a recursive query for a large (2500 record) RRset, which should
fail when using the default max-records-per-type setting of 100, but
succeed when the cap is disabled.
Add two new masterformat tests - the 'huge' zone fits within the ns1
limit and loads on the primary ns1 server, but must not transfer to the
ns2 secondary, and the 'uber' zone should not even load on the primary
ns1 server.
Previously, the number of RRs in the RRSets were internally unlimited.
As the data structure that holds the RRs is just a linked list, and
there are places where we just walk through all of the RRs, adding an
RRSet with huge number of RRs inside would slow down processing of said
RRSets.
Add a configurable limit to cap the number of the RRs in a single RRSet.
This is enforced at the database (rbtdb, qpzone, qpcache) level and
configured with new max-records-per-type configuration option that can
be configured globally, per-view and per-zone.
Changed the default value for 'allow-transfer' to 'none'; zone
transfers now require explicit authorization.
Updated all system tests to specify an allow-transfer ACL when needed.
Revised the ARM to specify that the default is 'none'.
When in -4 mode check that "IPv6 disabled and no IPv4 primaries"
is logged and when in -6 mode check that "IPv4 disabled and no IPv6
primaries" is logged.
The times it takes to run tests CI vary significantly enough
that it makes hypothesis test reach their deadlines and fail randomly
marking the tests as flaky.
This commit disables the deadlines when running in CI.
The most important being `dns_names` that generates dns.name.Name
objects based on given paramaters.
No guarantees are given when it comes the uniformity of generated
samples, however it plays nicely with the hypothesis' shrinking
algorithm.
Once we use hypothesis more widely (in at least one more test) this file
should be moved for it to be reused easily.
Check for more rcodes and various properties needed in the wildcard
test. Add a `name` module for various dns.name.Name operations (with
`prepend_label` function only now).
Expose `timeout` as a parameter of `query.tcp`/`query.udp`.
- duplicated question
- duplicated answer
- qtype as an answer
- two question types
- question names
- nsec3 bad owner name
- short record
- short question
- mismatching question class
- bad record owner name
- mismatched class in record
- mismatched KEY class
- OPT wrong owner name
- invalid RRSIG "covers" type
- UPDATE malformed delete type
- TSIG wrong class
- TSIG not the last record
An obscured DNSKEY RRset at a delegation was incorrectly added to
the NSEC/NSEC3 type bit map leading to zone verification failures.
This adds such a RRset to the test zone.
To avoid any escaping issues or messing with a language-specific format
when the variable has to be parsed, create a dedicated file for each
variable that is obtained from autoconf.
Make sure all initialization takes place in isctest.vars.__init__ and
export the initial env vars there. Remove the no longer needed env
fixture and use os.environ instead.
If OPENSSL_CONF is exported as an empty string, it will cause issues on
rhel9fips. Allow the environment variables to be set and exported, but
make sure to only export them if they have been set by the user.
The openssl config needs to be parsed for some tests that use SoftHSM2.
Rewrite the parsing to python and ensure the required variables are
properly set test-wide.
