Force ns3 to use a constant source address (10.53.0.3) when sending
transfer requests for the "initially-unavailable" zone to prevent
failures of transfers not triggered by bin/tests/system/mirror/tests.sh
from causing fallback to using a source address for which transfers of
that zone are refused throughout the entire "mirror" system test since
that might yield false positives.
A short time window exists between logging the addition of an NSEC3PARAM
record to a zone and committing it to the current version of the zone
database. If a query arrives during such a time window, an unsigned
response will be returned. One of the checks in the "inline" system
test requires NSEC3 records to be present in an answer - that check
would fail in the case described above. Use rndc instead of log
watching for checking whether zone signing and NSEC3 chain modifications
are complete in order to prevent intermittent "inline" system test
failures.
While "rndc reload" causes dns_zone_asyncload() to be called for the
signed version of an inline-signed zone, the subsequent zone_load() call
causes the raw version to be reloaded from storage. This means that
DNS_ZONEFLG_LOADPENDING gets set for the signed version of the zone by
dns_zone_asyncload() before the reload is attempted, but zone_postload()
is only called for the raw version and thus DNS_ZONEFLG_LOADPENDING is
cleared for the raw version, but not for the signed version. This in
turn prevents zone maintenance from happening for the signed version of
the zone.
Until commit 29b7efdd9f, this problem
remained dormant because DNS_ZONEFLG_LOADPENDING was previously
immediately, unconditionally cleared after zone loading was started
(whereas it should only be cleared when zone loading is finished or an
error occurs). This behavior caused other issues [1] and thus had to be
changed.
Fix reloading inline-signed zones by clearing DNS_ZONEFLG_LOADPENDING
for the signed version of the zone once the raw version reload
completes. Take care not to clear it prematurely during initial zone
load. Also make sure that DNS_ZONEFLG_LOADPENDING gets cleared when
zone_postload() encounters an error or returns early, to prevent other
scenarios from resulting in the same problem. Add comments aiming to
help explain code flow.
[1] see RT #47076
When an inline-signed zone is loaded, the master file for its signed
version is loaded and then a rollforward of the journal for the signed
version of the zone is performed. If DNS_JOURNALOPT_RESIGN is not set
during the latter phase, signatures loaded from the journal for the
signed version of the zone will not be scheduled for refresh. Fix the
conditional expression determining which flags should be used for the
dns_journal_rollforward() call so that DNS_JOURNALOPT_RESIGN is set when
zone_postload() is called for the signed version of an inline-signed
zone.
Extend bin/tests/system/stop.pl so that it can use "rndc halt" instead
of "rndc stop" as the former allows master file flushing upon shutdown
to be suppressed.
As part of resquery_response() refactoring [1], a goto statement was
replaced [2] with a call to a new function - originally called
rctx_delegation(), now folded into rctx_answer_none() - extracted from
existing code. However, one call site of that refactored function does
not reset the "result" variable, causing a referral with a non-empty
ANSWER section to be inadvertently treated as an error, which prevents
resolution of names reliant on servers sending such responses. Fix by
resetting the "result" variable to ISC_R_SUCCESS when a response
containing a non-empty ANSWER section can be treated as a delegation.
[1] see RT #45362
[2] see commit e1380a16741a3b4a57e54d7a9ce09dd12691522f
- added new 'validate-except' option, which configures an NTA with
expiry of 0xffffffff. NTAs with that value in the expiry field do not
expire, are are not written out when saving the NTA table and are not
dumped by rndc secroots
Each zone used in the "inline" system test contains a few dozen records.
Over a dozen of these zones are used in the test. Most records present
in these zones are not subsequently used in the test itself, but all of
them need to be signed by the named instances launched by the test,
which puts quite a bit of strain on lower-end machines, leading to
intermittent failures of the "inline" system test. Remove all redundant
records from the zones used in the "inline" system test in order to
stabilize it.
If "rndc signing -nsec3param ..." is ran for a zone which has not yet
been loaded or transferred (i.e. its "db" field is NULL), it will be
silently ignored by named despite rndc logging an "nsec3param request
queued" message, which is misleading. Prevent this by keeping a
per-zone queue of NSEC3PARAM change requests which arrive before a zone
is loaded or transferred and processing that queue once the raw version
of an inline-signed zone becomes available.
When query processing hits a delegation from a locally configured zone,
an attempt may be made to look for a better answer in the cache. In
such a case, the zone-sourced delegation data is set aside and the
lookup is retried using the cache database. When that lookup is
completed, a decision is made whether the answer found in the cache is
better than the answer found in the zone.
Currently, if the zone-sourced answer turns out to be better than the
one found in the cache:
- qctx->zdb is not restored into qctx->db,
- qctx->node, holding the zone database node found, is not even saved.
Thus, in such a case both qctx->db and qctx->node will point at cache
data. This is not an issue for BIND versions which do not support
mirror zones because in these versions non-recursive queries always
cause the zone-sourced delegation to be returned and thus the
non-recursive part of query_delegation() is never reached if the
delegation is coming from a zone. With mirror zones, however,
non-recursive queries may cause cache lookups even after a zone
delegation is found. Leaving qctx->db assigned to the cache database
when query_delegation() determines that the zone-sourced delegation is
the best answer to the client's query prevents DS records from being
added to delegations coming from mirror zones. Fix this issue by
keeping the zone database and zone node in qctx while the cache is
searched for an answer and then restoring them into qctx->db and
qctx->node, respectively, if the zone-sourced delegation turns out to be
the best answer. Since this change means that qctx->zdb cannot be used
as the glue database any more as it will be reset to NULL by RESTORE(),
ensure that qctx->db is not a cache database before attaching it to
qctx->client->query.gluedb.
Furthermore, current code contains a conditional statement which
prevents a mirror zone from being used as a source of glue records.
Said statement was added to prevent assertion failures caused by
attempting to use a zone database's glue cache for finding glue for an
NS RRset coming from a cache database. However, that check is overly
strict since it completely prevents glue from being added to delegations
coming from mirror zones. With the changes described above in place,
the scenario this check was preventing can no longer happen, so remove
the aforementioned check.
If qctx->zdb is not NULL, qctx->zfname will also not be NULL;
qctx->zsigrdataset may be NULL in such a case, but query_putrdataset()
handles pointers to NULL pointers gracefully. Remove redundant
conditional expressions to make the cleanup code in query_freedata()
match the corresponding sequences of SAVE() / RESTORE() macros more
closely.
dns_view_zonecut() may associate the dns_rdataset_t structure passed to
it even if it returns a result different then ISC_R_SUCCESS. Not
handling this properly may cause a reference leak. Fix by ensuring
'nameservers' is cleaned up in all relevant failure modes.
Prevent ans2.pl from responding authoritatively for any name at or below
example.net.
Make ans3.pl properly answer example.net/NS queries. Use string
comparisons instead of regular expressions where possible.
lo0 and lo0:0 are the same interface on Solaris. Make sure
bin/tests/system/ifconfig.sh does not touch lo0:0 in order to prevent it
from changing the address of the loopback interface on Solaris.
The "git status" command in Git versions before 1.7.2 does not support
the "--ignored" option. Prevent spamming the console when running
system tests from a Git repository on a host with an ancient Git version
installed.
The output of certain "dig +idnout" invocations may be locale-dependent.
Remove the "dig +idnout" subtest from the "digdelv" system test as IDN
support is already thoroughly tested by the "idna" system test.
Every prereq.sh script must include bin/tests/system/conf.sh, otherwise
if some prerequisite is not met, errors about echo_i not being found
will be printed instead of actual error messages.
Trying to resolve a trust anchor telemetry query for a locally served
zone does not cause upstream queries to be sent as the response is
determined just by consulting local data. Work around this issue by
calling dns_view_findzonecut() first in order to determine the NS RRset
for a given domain name and then passing the zone cut found to
dns_resolver_createfetch().
Note that this change only applies to TAT queries generated by the
resolver itself, not to ones received from downstream resolvers.
Update named_zone_reusable() so that it does not consider a zone to be
eligible for reuse if its old value of the "mirror" option differs from
the new one. This causes "rndc reconfig" to create a new zone structure
whenever the value of the "mirror" option is changed, which ensures that
the previous zone database is not reused and that flags are properly set
in responses sourced from zones whose "mirror" setting was changed at
runtime.
Net::DNS versions older than 0.67 respond to queries sent to a
Net::DNS::Nameserver even if its ReplyHandler returns undef. This makes
the "serve-stale" system test fail as it takes advantage of the newer
behavior. Since the latest Net::DNS version available with stock
RHEL/CentOS 6 packages is 0.65 and we officially support that operating
system, bin/tests/system/serve-stale/ans2/ans.pl should behave
consistently for various Net::DNS versions. Ensure that by reworking it
so that it does not use Net::DNS::Nameserver.
Net::DNS versions older than 0.68 insert a ./ANY RR into the QUESTION
section if the latter is empty. Since the latest Net::DNS version
available with stock RHEL/CentOS 6 packages is 0.65 and we officially
support that operating system, bin/tests/system/resolver/ans8/ans.pl
should behave consistently for various Net::DNS versions. Ensure that
by making handleUDP() return the query ID and flags generated by
Net::DNS with 8 zero bytes appended.
While idn2_to_unicode_8zlz() takes a 'flags' argument, it is ignored and
thus cannot be used to perform IDN checks on the output string.
The bug in libidn2 versions before 2.0.5 was not that a call to
idn2_to_unicode_8zlz() with certain flags set did not cause IDN checks
to be performed. The bug was that idn2_to_unicode_8zlz() did not check
whether a conversion can be performed between UTF-8 and the current
locale's character encoding. In other words, with libidn2 version
2.0.5+, if the current locale's character encoding is ASCII, then
idn2_to_unicode_8zlz() will fail when it is passed any Punycode string
which decodes to a non-ASCII string, even if it is a valid IDNA2008
name.
Rework idn_ace_to_locale() so that invalid IDNA2008 names are properly
and consistently detected for all libidn2 versions and locales.
Update the "idna" system test accordingly. Add checks for processing a
server response containing Punycode which decodes to an invalid IDNA2008
name. Fix invalid subtest description.
Certain characters, like symbols, are allowed by IDNA2003, but not by
IDNA2008. Make dig reject such symbols when IDN input processing is
enabled to ensure BIND only supports IDNA2008. Update the "idna" system
test so that it uses one of such symbols rather than one which is
disallowed by both IDNA2003 and IDNA2008.
Clean up the parts of configure.in responsible for handling libidn2
detection and adjust other pieces of the build system to match these
cleanups:
- use pkg-config when --with-libidn2 is used without an explicit path,
- look for idn2_to_ascii_lz() rather than idn2_to_ascii_8z() as the
former is used in BIND while the latter is not,
- do not look for idn2_to_unicode_8zlz() as it is present in all
libidn2 versions which have idn2_to_ascii_lz(),
- check whether the <idn2.h> header is usable,
- set LDFLAGS in the Makefile for dig so that, if specified, the
requested libidn2 path is used when linking with libidn2,
- override CPPFLAGS when looking for libidn2 components so that the
configure script does not produce warnings when libidn2 is not
installed system-wide,
- merge the AS_CASE() call into the AS_IF() call below it to simplify
code,
- indicate the default value of --with-libidn2 in "./configure --help"
output,
- use $with_libidn2 rather than $use_libidn2 to better match the name
of the configure script argument,
- stop differentiating between IDN "in" and "out" support, i.e. make
dig either support libidn2 or not; remove WITH_* Autoconf macros and
use a new one, HAVE_LIBIDN2, to determine whether libidn2 support
should be enabled.
