Most of the test zones in the dnssec system test can be verified.
Use -z when only a single key is being used so that the verifier
knows that only a single key is in use.
The method used to generate a test zone with multiple NSEC and
NSEC3 chains was incorrect. Multiple calls to dnssec-signzone
with multiple parameters is not additive. Extract the chain on
each run then add them to the final signed zone instance.
This is almost minimal prototype to show how to use python-hypothesis
library in a system test. It does not fully replace existing shell-based
system test for wildcards.
Check to see whether there are outstanding requests in the
httpd receive buffer after sending the response, and if so,
process them.
Test that pipelined requests are handled by sending multiple
minimal HTTP/1.1 using netcat (nc) and checking that we get
back the same number of responses.
In the 9.17.19 release "tls" statements verification code was
added. The code was too strict and assumed that every such a statement
should have both "cert-file" and "key-file" specified. This turned out
to be a regression, as in some cases we plan to use the "tls"
statement to specify TLS connection parameters.
This commit fixes this behaviour; now a "tls" statement should either
have both "cert-file" and "key-file" specified, or both should be
omitted.
Duplicate catalog zone entries caused an assertion failure
in named during configuration. This is now a soft error
that is detected earlier by named and also by named-checkconf.
Update the nsec3 system tests to use the new default values. Change
the policy for "nsec3-other" so that we still have a test case for
non-zero salt length.
Depending upon when the directory is sampled there may be 2
(oldest version removed and rename / reopen is in progresss) or
3 old versions of the log file.
Add a lame delegation to lame.example.org with only an A record
in the additional section; on failure, this will trigger a retry
with AAAA, which will loop. Test that dig returns SERVFAIL, in
addition to confirming that named doesn't hang on shutdown.
The qmin system test was printing spurious output. On investigation,
the test case turned out to be both broken and ineffective: its
expectations were wrong, and it was printing the output because its
wrong expectations were not met, and those failed expectations were
not causing a test failure. All of this has been corrected.
The statistics system test sometimes needs a pause to wait for the
expected stats to be reported.
Also, the test for priming queries was ineffective; the result of
the grep was not being checked.
The catz system test included a test case that was looking for a single
answer record after an update, when it should have been looking for two.
The test usually passed because of timing - the first dig usually got a
response before the update was completed - but occasionally the update
processed fast enough for the test to fail. On investigation, it turned
out to be the test that was wrong.
The digdelv system test has a test case in which stderr was
included in the dig output. When trace logging was in use,
this confused the grep and caused a spurious test failure.
Update the 'catz' system test by adding tests that update an
catalog zone (catalog1.example) while preserving existing entries
(increase SOA serial) then check that catalog zone has transferred
and that the existing entries have not accidentally been removed
as a consequence (can return updated zone content).
pytest was failing because it was testing features that had
not been configured. test to see if those features have been
configured before running the tests.
due to comparing logfile suffixes as 32 bit rather than 64 bit
integers, logfiles with timestamp suffixes that should have been
removed when rolling could be left in place. this has been fixed.
the logfileconfig system test did not conform to the style of
other tests, and was difficult to read and maintain. it has
been cleaned up and simplifeid in several ways:
- named.args used when appropriate so that named can be started with
specified command line arguments, instead of having it launched
directly from tests.sh
- unused root zone removed from named configuration
- an existing directory used instead of using 'mkdir' to create one
- dnssec-validation disabled to stop the server sending unnecessary queries
incidental fix: removed leftover debugging printfs from logconf.c.
Unify the header guard style and replace the inconsistent include guards
with #pragma once.
The #pragma once is widely and very well supported in all compilers that
BIND 9 supports, and #pragma once was already in use in several new or
refactored headers.
Using simpler method will also allow us to automate header guard checks
as this is simpler to programatically check.
For reference, here are the reasons for the change taken from
Wikipedia[1]:
> In the C and C++ programming languages, #pragma once is a non-standard
> but widely supported preprocessor directive designed to cause the
> current source file to be included only once in a single compilation.
>
> Thus, #pragma once serves the same purpose as include guards, but with
> several advantages, including: less code, avoidance of name clashes,
> and sometimes improvement in compilation speed. On the other hand,
> #pragma once is not necessarily available in all compilers and its
> implementation is tricky and might not always be reliable.
1. https://en.wikipedia.org/wiki/Pragma_once
Replace most "master/slave" terminology in tests with the preferred
"primary/secondary", with the following exceptions:
- When testing the old syntax
- When master is used in master file and master file format terms
- When master is used in hostmaster or postmaster terms
- When master used in legacy domain names (for example in dig.batch)
- When there is no replacement (for example default-masters)
Originally, the hash table used in RBT database would be resized when it
reached certain number of elements (defined by overcommit). This was
causing resolution brownouts for busy resolvers, because the rehashing
could take several seconds to complete. This was mitigated by
pre-allocating the hash table in the RBT database used for caching to be
large-enough as determined by max-cache-size. The downside of this
solution was that the pre-allocated hash table could take a significant
chunk of the memory even when the resolver cache would be otherwise
empty because the default value for max-cache-size is 90% of available
memory.
Implement incremental resizing[1] to perform the rehashing gradually:
1. During the resize, allocate the new hash table, but keep the old
table unchanged.
2. In each lookup or delete operation, check both tables.
3. Perform insertion operations only in the new table.
4. At each insertion also move r elements from the old table to the new
table.
5. When all elements are removed from the old table, deallocate it.
To ensure that the old table is completely copied over before the new
table itself needs to be enlarged, it is necessary to increase the
size of the table by a factor of at least (r + 1)/r during resizing.
In our implementation r is equal to 1.
The downside of this approach is that the old table and the new table
could stay in memory for longer when there are no new insertions into
the hash table for prolonged periods of time as the incremental
rehashing happens only during the insertions.
The upside of this approach is that it's no longer necessary to
pre-allocate large hash table, because the RBT hash table rehashing
doesn't cause resolution brownouts anymore and thus we can use the
memory as needed.
1. https://en.m.wikipedia.org/wiki/Hash_table#Dynamic_resizing
The documentation and feature-test were using '--with-idn' but the
configure script doesn't recognize this option. The correct option to
enable IDN support is '--with-libidn2'.
Add test to encode unicode sequence that encodes differently with
UseSTD3ASCIIRules=false which is default with idn2 >= 2.0.3 and
UseSTD3ASCIIRules=true which is what should be used to encode hostnames
and domains.
Remove the dynamic registration of result codes. Convert isc_result_t
from unsigned + #defines into 32-bit enum type in grand unified
<isc/result.h> header. Keep the existing values of the result codes
even at the expense of the description and identifier tables being
unnecessary large.
Additionally, add couple of:
switch (result) {
[...]
default:
break;
}
statements where compiler now complains about missing enum values in the
switch statement.
This commit makes dig fail with error in case a zone transfer is
attempted over a connections where ALPN was not negotiated. All other
request types will work fine.
as libdns is no longer exported, it's not necessary to have
init and shutdown functions. the only purpose they served
was to create a private mctx and run dst_lib_init(), which
can be called directly instead.
- serve-stale: dig wasn't always running in background when it should.
some of the serve-stale test cases are based on groups of dig calls
running simultaneously in the background: the test pauses and resumes
running after 'wait'. in some cases the final call to dig in a group
wasn't in the background, and this sometimes caused delays that
affected later test results. in another case, a test was simplified
and made more reliable by running dig in the foreground removing a
sleep.
- serve-stale: The extension of the dig timeout period from 10 to 11
seconds in commit 5307bf64ce was left undone in a few places and has
now been completed.
- serve-stale: Resolver-query-timeout was set incorrectly. a comment
above a test case in serve-stale/tests.sh says: "We configured a long
value of 30 seconds for resolver-query-timeout," but
resolver-query-timeout was actually set to 10, not 30. this is now
fixed.
- rpz: Force retransfer of the fast-expire zone, to ensure it's fully
loaded in ns3; previously it could have been left unloaded if ns5
wasn't up yet when ns3 attempted the zone transfer.
- statistics: The TCP4SendErr counter is incremented when a TCP dispatch
is canceled while sending. depending on test timing, this may have
happened by the time the statistics are dumped. worked around by
ignoring that stat couunter when checking for errors.
- hooks: Add a prereq.sh script to prevent running under TSAN.
- zero: Disabled the servfail cache so that SERVFAIL is reported only
when there actually is a failure, not repeatedly every time the same
query is sent.
- startrecv() and getnext() have been rewritten.
- Don't set TCP flag when connecting a UDP dispatch.
- Prevent TCP connections from trying to connect twice.
- dns_dispatch_gettcp() can now find a matching TCP dispatch that has
not yet fully connected, and attach to it. when the connection is
completed, the connect callbacks are run for all of the pending
entries.
- An atomic 'state' variable is now used for connection state instead of
attributes.
- When dns_dispatch_cancel() is called on a TCP dispatch entry, only
that one entry is canceled. the dispatch itself should not be shut
down until there are no dispatch entries left associated with it.
- Other incidental cleanup, including removing DNS_DISPATCHATTR_IPV4 and
_IPV6 (they were being set in the dispatch attributes but never used),
cleaning up dns_requestmgr_create(), and renaming dns_dispatch_read()
to the more descriptive dns_dispatch_resume().
- Responses received by the dispatch are no longer sent to the caller
via a task event, but via a netmgr-style recv callback. the 'action'
parameter to dns_dispatch_addresponse() is now called 'response' and
is called directly from udp_recv() or tcp_recv() when a valid response
has been received.
- All references to isc_task and isc_taskmgr have been removed from
dispatch functions.
- All references to dns_dispatchevent_t have been removed and the type
has been deleted.
- Added a task to the resolver response context, to be used for fctx
events.
- When the caller cancels an operation, the response handler will be
called with ISC_R_CANCELED; it can abort immediately since the caller
will presumably have taken care of cleanup already.
- Cleaned up attach/detach in resquery and request.
Since every dispsock was associated with a dispentry anyway (though not
always vice versa), the members of dispsock have been combined into
dispentry, which is now reference-counted. dispentry objects are now
attached before connecting and detached afterward to prevent races
between the connect callback and dns_dispatch_removeresponse().
Dispatch and dispatchmgr objects are now reference counted as well, and
the shutdown process has been simplified. reference counting of
resquery and request objects has also been cleaned up significantly.
dns_dispatch_cancel() now flags a dispentry as having been canceled, so
that if the connect callback runs after cancellation, it will not
initiate a read.
The isblackholed() function has been simplified.
The flow of operations in dispatch is changing and will now be similar
for both UDP and TCP queries:
1) Call dns_dispatch_addresponse() to assign a query ID and register
that we'll be listening for a response with that ID soon. the
parameters for this function include callback functions to inform the
caller when the socket is connected and when the message has been
sent, as well as a task action that will be sent when the response
arrives. (later this could become a netmgr callback, but at this
stage to minimize disruption to the calling code, we continue to use
isc_task for the response event.) on successful completion of this
function, a dispatch entry object will be instantiated.
2) Call dns_dispatch_connect() on the dispatch entry. this runs
isc_nm_udpconnect() or isc_nm_tcpdnsconnect(), as needed, and begins
listening for responses. the caller is informed via a callback
function when the connection is established.
3) Call dns_dispatch_send() on the dispatch entry. this runs
isc_nm_send() to send a request.
4) Call dns_dispatch_removeresponse() to terminate listening and close
the connection.
Implementation comments below:
- As we will be using netmgr buffers now. code to send the length in
TCP queries has also been removed as that is handled by the netmgr.
- TCP dispatches can be used by multiple simultaneous queries, so
dns_dispatch_connect() now checks whether the dispatch is already
connected before calling isc_nm_tcpdnsconnect() again.
- Running dns_dispatch_getnext() from a non-network thread caused a
crash due to assertions in the netmgr read functions that appear to be
unnecessary now. the assertions have been removed.
- fctx->nqueries was formerly incremented when the connection was
successful, but is now incremented when the query is started and
decremented if the connection fails.
- It's no longer necessary for each dispatch to have a pool of tasks, so
there's now a single task per dispatch.
- Dispatch code to avoid UDP ports already in use has been removed.
- dns_resolver and dns_request have been modified to use netmgr callback
functions instead of task events. some additional changes were needed
to handle shutdown processing correctly.
- Timeout processing is not yet fully converted to use netmgr timeouts.
- Fixed a lock order cycle reported by TSAN (view -> zone-> adb -> view)
by by calling dns_zt functions without holding the view lock.
- Many dispatch attributes can be set implicitly instead of being passed
in. we can infer whether to set DNS_DISPATCHATTR_TCP or _UDP from
whether we're calling dns_dispatch_createtcp() or _createudp(). we
can also infer DNS_DISPATCHATTR_IPV4 or _IPV6 from the addresses or
the socket that were passed in.
- We no longer use dup'd sockets in UDP dispatches, so the 'dup_socket'
parameter has been removed from dns_dispatch_createudp(), along with
the code implementing it. also removed isc_socket_dup() since it no
longer has any callers.
- The 'buffersize' parameter was ignored and has now been removed;
buffersize is now fixed at 4096.
- Maxbuffers and maxrequests don't need to be passed in on every call to
dns_dispatch_createtcp() and _createudp().
In all current uses, the value for mgr->maxbuffers will either be
raised once from its default of 20000 to 32768, or else left
alone. (passing in a value lower than 20000 does not lower it.) there
isn't enough difference between these values for there to be any need
to configure this.
The value for disp->maxrequests controls both the quota of concurrent
requests for a dispatch and also the size of the dispatch socket
memory pool. it's not clear that this quota is necessary at all. the
memory pool size currently starts at 32768, but is sometimes lowered
to 4096, which is definitely unnecessary.
This commit sets both values permanently to 32768.
- Previously TCP dispatches allocated their own separate QID table,
which didn't incorporate a port table. this commit removes
per-dispatch QID tables and shares the same table between all
dispatches. since dispatches are created for each TCP socket, this may
speed up the dispatch allocation process. there may be a slight
increase in lock contention since all dispatches are sharing a single
QID table, but since TCP sockets are used less often than UDP
sockets (which were already sharing a QID table), it should not be a
substantial change.
- The dispatch port table was being used to determine whether a port was
already in use; if so, then a UDP socket would be bound with
REUSEADDR. this commit removes the port table, and always binds UDP
sockets that way.
Currently the netmgr doesn't support unconnected, shared UDP sockets, so
there's no reason to retain that functionality in the dispatcher prior
to porting to the netmgr.
In this commit, the DNS_DISPATCHATTR_EXCLUSIVE attribute has been
removed as it is now non-optional; UDP dispatches are alwasy exclusive.
Code implementing non-exclusive UDP dispatches has been removed.
dns_dispatch_getentrysocket() now always returns the dispsocket for UDP
dispatches and the dispatch socket for TCP dispatches.
There is no longer any need to search for existing dispatches from
dns_dispatch_getudp(), so the 'mask' option has been removed, and the
function renamed to the more descriptive dns_dispatch_createudp().
