tcp-clients settings could be exceeded in some cases by
creating more and more active TCP clients that are over
the set quota limit, which in the end could lead to a
DoS attack by e.g. exhaustion of file descriptors.
If TCP client we're closing went over the quota (so it's
not attached to a quota) mark it as mortal - so that it
will be destroyed and not set up to listen for new
connections - unless it's the last client for a specific
interface.
(cherry picked from commit eafcff07c25bdbe038ae1e4b6660602a080b9395)
(cherry picked from commit 9e7617cc84)
- Always set is_zonep in query_getdb; previously it was only set if
result was ISC_R_SUCCESS or ISC_R_NOTFOUND.
- Don't reset is_zone for redirect.
- Style cleanup.
(cherry picked from commit a85cc641d7a4c66cbde03cc4e31edc038a24df46)
(cherry picked from commit 486a201149)
- named could return FORMERR if parsing iterative responses
ended with a result code such as DNS_R_OPTERR. instead of
computing a response code based on the result, in this case
we now just force the response to be SERVFAIL.
this restores functionality that was removed in commit 03be5a6b4e,
allowing named to search in authoritative zone databases outside the
current zone for additional data, if and only if recursion is allowed
and minimal-responses is disabled.
During server reconfiguration, plugin instances set up for the old views
are unloaded very close to the end of the whole process, after new
plugin instances are set up. As the log message announcing plugin
unloading is emitted at the default "info" level, the user might be
misled into thinking that it is the new plugin instances that are being
unloaded for some reason, particularly because all other messages logged
at the "info" level around the same time inform about setting things up
rather than tearing them down. Since no distinction is currently made
between destroying a view due to reconfiguration and due to a shutdown
in progress, there is no easy way to vary the contents of the log
message depending on circumstances. Since this message is not a
particularly critical one, demote it to debug level to prevent
confusion.
Implement a helper function which, given an input string:
- copies it verbatim if it contains at least one path separator,
- prepends the named plugin installation directory to it otherwise.
This function will allow configuration parsing code to conveniently
determine the full path to a plugin module given either a path or a
filename.
While other, simpler ways exist for making sure filenames passed to
dlopen() cause the latter to look for shared objects in a specific
directory, they are very platform-specific. Using full paths is thus
likely the most portable and reliable solution.
Also added unit tests for ns_plugin_expandpath() to ensure it behaves
as expected for absolute paths, relative paths, and filenames, for
various target buffer sizes.
(Note: plugins share a directory with named on Windows; there is no
default plugin path. Therefore the source path is copied to the
destination path with no modification.)
in query_respond_any(), the assumption had previously been made that it
was impossible to get past iterating the node with a return value of
ISC_R_NOMORE but not have found any records, unless we were searching
for RRSIG or SIG. however, it is possible for other types to exist but
be hidden, such as when the zone is transitioning from insecure to
secure and DNSSEC types are encountered, and this situation could
trigger an assertion. removed the assertion and reorganized the code.
Transfer statistics are currently only reported for incoming transfers,
even though they are equally useful for outgoing transfers. Define a
separate structure for keeping track of the number of messages, records,
and bytes sent during each outgoing transfer, along with the time each
outgoing transfer took. Repurpose the 'nmsg' field of the xfrout_ctx_t
structure for tracking the number of messages actually sent, ensuring it
is only increased after isc_socket_send() indicates success. Report the
statistics gathered when an outgoing transfer completes.
The 'nmsg' field of the xfrout_ctx_t structure is an integer, even
though it is only ever compared against 0 (for tracking whether the
QUESTION section has already been sent to the client). Use a boolean
instead as it is more appropriate and also enables 'nmsg' to be
repurposed.
This change makes rndc dumpdb correctly print the "; stale" line.
It also provides extra information on how long this data may still
be served to clients (in other words how long the stale RRset may
still be used).
- "hook" is now used only for hook points and hook actions
- the "hook" statement in named.conf is now "plugin"
- ns_module and ns_modlist are now ns_plugin and ns_plugins
- ns_module_load is renamed ns_plugin_register
- the mandatory functions in plugin modules (hook_register,
hook_check, hook_version, hook_destroy) have been renamed
- use a per-view module list instead of global hook_modules
- create an 'instance' pointer when registering modules, store it in
the module structure, and use it as action_data when calling
hook functions - this enables multiple module instances to be set
up in parallel
- also some nomenclature changes and cleanup
- added some hook points that will be needed for a dns64 module later
- moved some code from the beginning of query_respond() to
the end of query_prepresponse(); this has no effect on functionality
but means we can have a hook point at the top of query_respond(),
which seems nicer
- compressed duplicated code into query_zerottl_refetch() function
- added a qctx->answered flag so that a module can prevent
query_addrrset() from being called from query_respond() when
it's already been called from the module.
- this is necessary because adding the same hook to multiple views
causes the ISC_LIST link value to become inconsistent; it isn't
noticeable when only one hook action is ever registered at a
given hook point, but it will break things when there are two.
- eliminate qctx->hookdata and client->hookflags.
- use a memory pool to allocate data blobs in the filter-aaaa module,
and associate them with the client address in a hash table
- instead of detaching the client in query_done(), mark it for deletion
and then call ns_client_detach() from qctx_destroy(); this ensures
that it will still exist when the QCTX_DESTROYED hook point is
reached.
- use a get_hooktab() function to determine the hook table.
- PROCESS_HOOK now jumps to a cleanup tag on failure
- add PROCESS_ALL_HOOKS in query.c, to run all hook functions at
a specified hook point without stopping. this is to be used for
intiialization and destruction functions that must run in every
module.
- 'result' is set in PROCESS_HOOK only when a hook function
interrupts processing.
- revised terminology: a "callback" is now a "hook action"
- remove unused NS_PROCESS_HOOK and NS_PROCESS_HOOK_VOID macros.
- added a 'hookdata' array to qctx to store pointers to up to
16 blobs of data which are allocated by modules as needed.
each module is assigned an ID number as it's loaded, and this
is the index into the hook data array. this is to be used for
holding persistent state between calls to a hook module for a
specific query.
- instead of using qctx->filter_aaaa, we now use qctx->hookdata.
(this was the last piece of filter-aaaa specific code outside the
module.)
- added hook points for qctx initialization and destruction. we get
a filter-aaaa data pointer from the mempool when initializing and
store it in the qctx->hookdata table; return to to the mempool
when destroying the qctx.
- link the view to the qctx so that detaching the client doesn't cause
hooks to fail
- added a qctx_destroy() function which must be called after qctx_init;
this calls the QCTX_DESTROY hook and detaches the view
- general cleanup and comments
- make some cfg-parsing functions global so they can be run
from filter-aaaa.so
- add filter-aaaa options to the hook module's parser
- mark filter-aaaa options in named.conf as obsolete, remove
from named and checkconf, and update the filter-aaaa test not to
use checkconf anymore
- remove filter-aaaa-related struct members from dns_view
- allow multiple "hook" statements at global or view level
- add "optional bracketed text" type for optional parameter list
- load hook module from specified path rather than hardcoded path
- add a hooktable pointer (and a callback for freeing it) to the
view structure
- change the hooktable functions so they no longer update ns__hook_table
by default, and modify PROCESS_HOOK so it uses the view hooktable, if
set, rather than ns__hook_table. (ns__hook_table is retained for
use by unit tests.)
- update the filter-aaaa system test to load filter-aaaa.so
- add a prereq script to check for dlopen support before running
the filter-aaaa system test
not yet done:
- configuration parameters are not being passed to the filter-aaaa
module; the filter-aaaa ACL and filter-aaaa-on-{v4,v6} settings are
still stored in dns_view
- temporary kluge! in this version, for testing purposes,
named always searches for a filter-aaaa module at /tmp/filter-aaaa.so.
this enables the filter-aaaa system test to run even though the
code to configure hooks in named.conf hasn't been written yet.
- filter-aaaa-on-v4, filter-aaaa-on-v6 and the filter-aaaa ACL are
still configured in the view as they were before, not in the hook.
- these formerly static helper functions have been moved into client.c
and made external so that they can be used in hook modules as well as
internally in libns: query_newrdataset, query_putrdataset,
query_newnamebuf, query_newname, query_getnamebuf, query_keepname,
query_releasename, query_newdbversion, query_findversion
- made query_recurse() and query_done() into public functions
ns_query_recurse() and ns_query_done() so they can be called from
modules.
- the goal of this change is for AAAA filtering to be fully contained
in the query logic, and implemented at discrete points that can be
replaced with hook callouts later on.
- the new code may be slightly less efficient than the old filter-aaaa
implementation, but maximum efficiency was never a priority for AAAA
filtering anyway.
- we now use the rdataset RENDERED attribute to indicate that an AAAA
rdataset should not be included when rendering the message. (this
flag was originally meant to indicate that an rdataset has already
been rendered and should not be repeated, but it can also be used to
prevent rendering in the first place.)
- the DNS_MESSAGERENDER_FILTER_AAAA, NS_CLIENTATTR_FILTER_AAAA,
and DNS_RDATASETGLUE_FILTERAAAA flags are all now unnecessary and
have been removed.
- the purpose of this change is allow for more well-defined hook points
to be available in the query processing logic. some functions that
formerly didn't have access to 'qctx' do now; this is needed because
'qctx' is what gets passed when calling a hook function.
- query_addrdataset() has been broken up into three separate functions
since it used to do three unrelated things, and what was formerly
query_addadditional() has been renamed query_additional_cb() for
clarity.
- client->filter_aaaa is now qctx->filter_aaaa. (later, it will be moved
into opaque storage in the qctx, for use by the filter-aaaa module.)
- cleaned up style and braces
- move hooks.h to public include directory
- ns_hooktable_init() initializes a hook table. if NULL is passed in, it
initializes the global hook table
- ns_hooktable_save() saves a pointer to the current global hook table.
- ns_hooktable_reset() replaces the global hook table with different
one
- ns_hook_add() adds hooks at specified hook points in a hook table (or
the global hook table if the specified table is NULL)
- load and unload functions support dlopen() of hook modules (this is
adapted from dyndb and not yet functional)
- began adding new hook points to query.c
If we know that we'll have a task pool doing specific thing it's better
to use this knowledge and bind tasks to task queues, this behaves better
than randomly choosing the task queue.
- use bound resolver tasks - we have a pool of tasks doing resolutions,
we can spread the load evenly using isc_task_create_bound
- quantum set universally to 25
While implementing the new unit testing framework cmocka, it was found that the
BIND 9 code doesn't compile when assertions are disabled or replaced with any
function (such as mock_assert() from cmocka unit testing framework) that's not
directly recognized as assertion by the compiler.
This made the compiler to complain about blocks of code that was recognized as
unreachable before, but now it isn't.
The changes in this commit include:
* assigns default values to couple of local variables,
* moves some return statements around INSIST assertions,
* adds __builtin_unreachable(); annotations after some INSIST assertions,
* fixes one broken assertion (= instead of ==)
Rationale: the nonce here is only used to make sure there is a low
probability of duplication, according to section B.2 of RFC7873.
It is only 32-bit, and even if an attacker knows the algorithm used
to generate nonces it won't, in any way, give him any platform to
attack the server as long as server secret used to sign the
(nonce, time) pair with HMAC-SHA1 is secure.
On the other hand, currently, each packet sent requires (unnecessarily)
a CS pseudo-random number which is ineffective.
Use a zone's 'type' field instead of the value of its DNS_ZONEOPT_MIRROR
option for checking whether it is a mirror zone. This makes said zone
option and its associated helper function, dns_zone_mirror(), redundant,
so remove them. Remove a check specific to mirror zones from
named_zone_reusable() since another check in that function ensures that
changing a zone's type prevents it from being reused during
reconfiguration.
Rather than overloading dns_zone_slave and discerning between a slave
zone and a mirror zone using a zone option, define a separate enum
value, dns_zone_mirror, to be used exclusively by mirror zones. Update
code handling slave zones to ensure it also handles mirror zones where
applicable.
Commit ba91243542 causes the resolver to
respond to a client query with FORMERR when all upstream queries sent to
the servers authoritative for QNAME elicit FORMERR responses. This
happens because resolver code returns DNS_R_FORMERR in such a case and
dns_result_torcode() acts as a pass-through for all arguments which are
already a valid RCODE.
The correct RCODE to set in the response returned to the client in the
case described above is SERVFAIL. Make sure this happens by overriding
the RCODE in query_gotanswer(), on the grounds that any format errors in
the client query itself should be caught long before execution reaches
that point. This change should not reduce query error logging accuracy
as the resolver code itself reports the exact reason for returning a
DNS_R_FORMERR result using log_formerr().
In some cases, setting qctx->result to DNS_R_SERVFAIL causes the value
of a 'result' variable containing a more specific failure reason to be
effectively discarded. This may cause certain query error log messages
to lack specificity despite a more accurate problem cause being
determined during query processing.
In other cases, qctx->result is set to DNS_R_SERVFAIL even though a more
specific error (e.g. ISC_R_NOMEMORY) could be explicitly indicated.
Since the response message's RCODE is derived from qctx->result using
dns_result_torcode(), which handles a number of possible isc_result_t
values and returns SERVFAIL for anything not explicitly listed, it is
fine to set qctx->result to something more specific than DNS_R_SERVFAIL
(in fact, this is already being done in a few cases). Modify most
QUERY_ERROR() calls so that qctx->result is set to a more specific error
code when possible. Adjust query_error() so that statistics are still
calculated properly. Remove the RECURSE_ERROR() macro which was
introduced exactly because qctx->result could be set to DNS_R_SERVFAIL
instead of DNS_R_DUPLICATE or DNS_R_DROP, which need special handling.
Modify dns_sdlz_putrr() so that it returns DNS_R_SERVFAIL when a DLZ
driver returns invalid RDATA, in order to prevent setting RCODE to
FORMERR (which is what dns_result_torcode() translates e.g. DNS_R_SYNTAX
to) while responding authoritatively.
When something goes wrong while recursing for an answer to a query,
query_gotanswer() sets a flag (qctx->want_stale) in the query context.
query_done() is subsequently called and it can either set up a stale
response lookup (if serve-stale is enabled) or conclude that a SERVFAIL
response should be sent. This may cause confusion when looking at query
error logs since the QUERY_ERROR() line responsible for setting the
response's RCODE to SERVFAIL is not in a catch-all branch of a switch
statement inside query_gotanswer() (like it is for authoritative
responses) but rather in a code branch which appears to have something
to do with serve-stale, even when the latter is not enabled.
Extract the part of query_done() responsible for checking serve-stale
configuration and optionally setting up a stale response lookup into a
separate function, query_usestale(), shifting the responsibility for
setting the response's RCODE to SERVFAIL to the same QUERY_ERROR() line
in query_gotanswer() which is evaluated for authoritative responses.
- update_log() is called to log update errors, but if those errors
occur before the zone is set (for example, when returning NOTAUTH)
it returns without logging anything.
