Instead of the explicit struct initializer with all member, rely on the fact
that static variables are explicitly initialized to 0 if not explicitly
initialized.
The MSVS C compiler requires every struct to have at least one member.
The dns_geoip_databases_t structure had one set of members for
HAVE_GEOIP and a different set for HAVE_GEOIP2, and none when neither
API is in use.
This commit silences the compiler error by moving the declaration of
dns_geoip_databases_t to types.h as an opaque reference, and commenting
out the contents of geoip.h when neither version of GeoIP is enabled.
- revise mapping of search terms to database types to match the
GeoIP2 schemas.
- open GeoIP2 databases when starting up; close when shutting down.
- clarify the logged error message when an unknown database type
is configured.
- add new geoip ACL subtypes to support searching for continent in
country databases.
- map geoip ACL subtypes to specific MMDB database queries.
- perform MMDB lookups based on subtype, saving state between
queries so repeated lookups for the same address aren't necessary.
- "--with-geoip" is used to enable the legacy GeoIP library.
- "--with-geoip2" is used to enable the new GeoIP2 library
(libmaxminddb), and is on by default if the library is found.
- using both "--with-geoip" and "--with-geoip2" at the same time
is an error.
- an attempt is made to determine the default GeoIP2 database path at
compile time if pkg-config is able to report the module prefix. if
this fails, it will be necessary to set the path in named.conf with
geoip-directory
- Makefiles have been updated, and a stub lib/dns/geoip2.c has been
added for the eventual GeoIP2 search implementation.
if "rndc reload" fails, the result code is supposed to be passed to
zone_postload, but for inline-signing zones, the result can be
overwritten first by a call to the ZONE_TRYLOCK macro. this can lead
to the partially-loaded unsigned zone being synced over to the signed
zone instead of being rejected.
Since commit 0771dd3be8, <isc/mem.h> no
longer includes <isc/xml.h>. On some systems (e.g. FreeBSD), this means
that no header included by lib/dns/dnsrps.c (and no header included by
those headers) contains a definition of free() any more, which triggers
a compiler warning as lib/dns/dnsrps.c calls that function. Add the
missing #include directive to prevent that warning from being triggered.
No function called dns_dnssecsignstats_decrement() actually exists.
Putting it into lib/dns/win32/libdns.def.in breaks at least some Windows
builds. Remove the nonexistent function from that file.
The ax_check_openssl m4 macro used OPENSSL_INCLUDES. Rename the
subst variable to OPENSSL_CFLAGS and wrap AX_CHECK_OPENSSL() in
action-if-not-found part of PKG_CHECK_MODULE check for libcrypto.
The json-c have previously leaked into the global namespace leading
to forced -I<include_path> for every compilation unit using isc/xml.h
header. This MR fixes the usage making the caller object opaque.
The libxml2 have previously leaked into the global namespace leading
to forced -I<include_path> for every compilation unit using isc/xml.h
header. This MR fixes the usage making the caller object opaque.
In addition to gather how many times signatures are created per
key in a zone, also count how many of those signature creations are
because of DNSSEC maintenance. These maintenance counters are
incremented if a signature is refreshed (but the RRset did not
changed), when the DNSKEY RRset is changed, and when that leads
to additional RRset / RRSIG updates (for example SOA, NSEC).
BIND 9.11.0 has bumped DNS_CLIENTINFOMETHODS_VERSION and _AGE to
version 2 and 1 in the dlz_minimal.h because a member was addet to the
dnsclientinfo struct. It was found out that the new member is not
used anywhere and there are no accessor functions therefore the change
was reverted.
Later on, it was found out that the revert caused some problems to the
users of BIND 9, and thus this changes takes a different approach by
syncing the values other way around.
The common construct seen in the BIND 9 source is func(isc_mem_t *mctx, ...).
Unfortunately, the dnstest.{h,c} has been using mctx as a global symbol, which
in turn generated a lot of errors when update.c got included in update_test.c.
As a rule of thumb, we should avoid naming global symbols with generic names
(like mctx) and we should prefix them with "namespace" (like dt_mctx).
The CHECK() macro has been defined both in dnstest.h and update.c
files. This has created a conflict between macro definitions when
including both of the files in update_test.c. While the CHECK() macro
is convenient for the tests, it has been really used in just two
files, so the MR moves them into those respective .c files.
lib/dns/tests/update_test was failing on macOS on random occasions. It
turned out this was a linker problem - it preferred isc_stdtime_get()
from libisc instead of the local version in lib/dns/tests/update_test.c.
Fix by including the original .c file in the unit test. This has two
benefits:
a) linking order may no longer cause issues as symbols found in the
same compilation unit are always preferred,
b) it allows writing tests for static functions in lib/dns/update.c.
Compiling with -O3 triggers the following warnings with GCC 9.1:
task.c: In function ‘isc_taskmgr_create’:
task.c:1384:43: warning: ‘%04u’ directive output may be truncated writing between 4 and 10 bytes into a region of size 6 [-Wformat-truncation=]
1384 | snprintf(name, sizeof(name), "isc-worker%04u", i);
| ^~~~
task.c:1384:32: note: directive argument in the range [0, 4294967294]
1384 | snprintf(name, sizeof(name), "isc-worker%04u", i);
| ^~~~~~~~~~~~~~~~
task.c:1384:3: note: ‘snprintf’ output between 15 and 21 bytes into a destination of size 16
1384 | snprintf(name, sizeof(name), "isc-worker%04u", i);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
private_test.c: In function ‘private_nsec3_totext_test’:
private_test.c:110:9: warning: array subscript 4 is outside array bounds of ‘uint32_t[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
110 | while (*sp == '\0' && slen > 0) {
| ^~~
private_test.c:103:11: note: while referencing ‘salt’
103 | uint32_t salt;
| ^~~~
Prevent these warnings from being triggered by increasing the size of
the relevant array (task.c) and reordering conditions (private_test.c).
write locking.
Unreachable cache in zonemgr is realized as an static LRU list.
When we 'use' an entry we need to update the last-used time, we
can use atomics to do so without the necessity to upgrading
read-lock to write-lock.
- change references to trusted-keys to dnssec-keys with static-key
- rebuild doc/misc/options and other generated grammar doc
- add a "see MANAGED-KEYS" note when building named.conf.docbook
- trusted-keys is now flagged as deprecated, but still works
- managed-keys can be used to configure permanent trust anchors by
using the "static-key" keyword in place of "initial-key"
- parser now uses an enum for static-key and initial-key keywords
Since 2008, the cleaning-interval timer has been documented as
"effectively obsolete" and disabled in the default configuration with
a comment saying "now meaningless".
This change deletes all the code that implements the cleaning-interval
timer, except for the config parser in whcih it is now explicitly
marked as obsolete.
I have verified (using the deletelru and deletettl cache stats) that
named still cleans the cache after this change.
qname minimization, even in relaxed mode, can fail on
some very broken domains. In relaxed mode, instead of
asking for "foo.bar NS" ask for "_.foo.bar A" to either
get a delegation or NXDOMAIN. It will require more queries
than regular mode for proper NXDOMAINs.
On some systems (namely Debian buster armhf) the readdir() call fails
with `Value too large for defined data type` unless the
_FILE_OFFSET_BITS=64 is defined. The correct way to fix this is to
get the appropriate compilation parameters from getconf system
interface.
This work cleans up the API which includes couple of things:
1. Make the isc_appctx_t type fully opaque
2. Protect all access to the isc_app_t members via stdatomics
3. sigwait() is part of POSIX.1, remove dead non-sigwait code
4. Remove unused code: isc_appctx_set{taskmgr,sockmgr,timermgr}
If named is configured to perform DNSSEC validation and also forwards
all queries ("forward only;") to validating resolvers, negative trust
anchors do not work properly because the CD bit is not set in queries
sent to the forwarders. As a result, instead of retrieving bogus DNSSEC
material and making validation decisions based on its configuration,
named is only receiving SERVFAIL responses to queries for bogus data.
Fix by ensuring the CD bit is always set in queries sent to forwarders
if the query name is covered by an NTA.
This affects CDS records generated by `named` and `dnssec-signzone`
based on `-P sync` and `-D sync` key timing instructions.
This is for conformance with the DS/CDS algorithm requirements in
https://tools.ietf.org/html/draft-ietf-dnsop-algorithm-update
The option `update-check-ksk` will look if both KSK and ZSK are
available before signing records. It will make sure the keys are
active and available. However, for operational practices keys may
be offline. This commit relaxes the update-check-ksk check and will
mark a key that is offline to be available when adding signature
tasks.
Add dns_rdata_totext() and dns_rdata_fromtext() to fromwire for
valid inputs to ensure that what we accept in dns_rdata_fromwire()
can be written out and read back in.
In dns_rpz_update_from_db we call setup_update which creates the db
iterator and calls dns_dbiterator_first. This unpauses the iterator and
might cause db->tree_lock to be acquired. We then do isc_task_send(...)
on an event to do quantum_update, which (correctly) after each iteration
calls dns_dbiterator_pause, and re-isc_task_sends itself.
That's an obvious bug, as we're holding a lock over an async task send -
if a task requesting write (e.g. prune_tree) is scheduled on the same
workers queue as update_quantum but before it, it will wait for the
write lock indefinitely, resulting in a deadlock.
To fix it we have to pause dbiterator in setup_update.
When parsing message with DNS_MESSAGE_BESTEFFORT (used exclusively in
tools, never in named itself) if we hit an invalid SIG(0) in wrong
place we continue parsing the message, and put the sig0 in msg->sig0.
If we then hit another sig0 in a proper place we see that msg->sig0
is already 'taken' and we don't free name and rdataset, and we don't
set seen_problem. This causes an assertion failure.
This fixes that issue by setting seen_problem if we hit second sig0,
tsig or opt, which causes name and rdataset to be always freed.
Change to cmocka broken initialization of TZ environment. This time,
commit 1cf1254051 is not soon enough. Has
to be moved more forward, before any other tests. It library is not full
reinitialized on each test.
When sending an udp query (resquery_send) we first issue an asynchronous
isc_socket_connect and increment query->connects, then isc_socket_sendto2
and increment query->sends.
If we happen to cancel this query (fctx_cancelquery) we need to cancel
all operations we might have issued on this socket. If we are under very high
load the callback from isc_socket_connect (resquery_udpconnected) might have
not yet been fired. In this case we only cancel the CONNECT event on socket,
and ignore the SEND that's waiting there (as there is an `else if`).
Then we call dns_dispatch_removeresponse which kills the dispatcher socket
and calls isc_socket_close - but if system is under very high load, the send
we issued earlier might still not be complete - which triggers an assertion
because we're trying to close a socket that's still in use.
The fix is to always check if we have incomplete sends on the socket and cancel
them if we do.
Use them in structs for various rdata types where they are missing.
This doesn't change the structs since we are replacing explicit
uint8_t field types with aliases for uint8_t.
Use dns_dsdigest_t in library function arguments.
Improve dnssec-cds with these more specific types.
In case when a zone fails to load because the file does not exist
or is malformed, we should not run the callback that updates the
zone database when the load is done. This is achieved by
unregistering the callbacks if at zone load end if the result
indicates something else than success.
As pointed out in !813 db_registered is sort of redundant. It is
set to `true` only in `dns_zone_rpz_enable_db()` right before the
`dns_rpz_dbupdate_callback()` callback is registered. It is only
required in that callback and it is the only place that the callback
is registered. Therefore there is no path that that `REQUIRE` can
fail.
The `db_registered` variable is only set to `false` in
`dns_rpz_new_zone`, so it is not like the variable is unset again
later.
The only other place where `db_registered` is checked is in
`rpz_detach()`. If `true`, it will call
`dns_db_updatenotify_unregister()`. However if that happens, the
`db_registered` is not set back to `false` thus this implies that
this may happen multiple times. If called a second time, most
likely the unregister function will return `ISC_R_NOTFOUND`, but
the return value is not checked anyway. So it can do without the
`db_registered` check.
This may happen when loading an RPZ failed and the code path skips
calling dns_db_endload(). The dns_rpz_zone_t object is still kept
marked as having registered db. So when this object is finally
destroyed in rpz_detach(), this code will incorrectly call
`dns_db_updatenotify_unregister()`:
if (rpz->db_registered)
dns_db_updatenotify_unregister(rpz->db,
dns_rpz_dbupdate_callback, rpz);
and trigger this assertion failure:
REQUIRE(db != NULL);
To fix this, only call `dns_db_updatenotify_unregister()` when
`rpz->db` is not NULL.
If `dns_dnssec_keyfromrdata` failed we don't need to call
`dst_key_free` because no `dstkey` was created. Doing so
nevertheless will result in an assertion failure.
This can happen if the key uses an unsupported algorithm.
When a mirror zone is verified, the 'ignore_kskflag' argument passed to
dns_zoneverify_dnssec() is set to false. This means that in order for
its verification to succeed, a mirror zone needs to have at least one
key with the SEP bit set configured as a trust anchor. This brings no
security benefit and prevents zones signed only using keys without the
SEP bit set from being mirrored, so change the value of the
'ignore_kskflag' argument passed to dns_zoneverify_dnssec() to true.
The "mirror" system test checks whether log messages announcing a mirror
zone coming into effect are emitted properly. However, the helper
functions responsible for waiting for zone transfers and zone loading to
complete do not wait for these exact log messages, but rather for other
ones preceding them, which introduces a possibility of false positives.
This problem cannot be addressed by just changing the log message to
look for because the test still needs to discern between transferring a
zone and loading a zone.
Add two new log messages at debug level 99 (which is what named
instances used in system tests are configured with) that are to be
emitted after the log messages announcing a mirror zone coming into
effect. Tweak the aforementioned helper functions to only return once
the log messages they originally looked for are followed by the newly
added log messages. This reliably prevents races when looking for
"mirror zone is now in use" log messages and also enables a workaround
previously put into place in the "mirror" system test to be reverted.
- there was a memory leak when using negotiated TSIG keys.
- TKEY responses could only be signed when using a newly negotiated
key; if an existent matching TSIG was found in in the keyring it
would not be used.
This adds a test for rndc dumpdb to ensure the correct "stale
comment" is printed. It also adds a test for non-stale data to
ensure no "stale comment" is printed for active RRsets.
In addition, the serve-stale tests are hardened with more accurate
grep calls.
