The dnssec-must-be-secure feature was added in the early days of BIND 9
and DNSSEC and it makes sense only as a debugging feature. There are no
reasons to keep this feature in the production code anymore.
Remove the feature to simplify the code.
when the attach-cache option is used in the options block
with an arbitrary name, it causes all views to use the same
cache. however, previously, this could cause the cache to be
deleted and a new cache created every time the server was
reconfigured. this did *not* occur when attach-cache was
used at the view level to refer back to another view's cache.
in this commit we correct the problem by checking for
pre-existing caches during reconfiguration, and moving
them from the old server cache list to the new cache list
before cleaning up and freeing the old cache list.
If ECDSAP256SHA256_SUPPORTED or ECDSAP384SHA384_SUPPORTED variables were
not present in the environment, os.environ would raise KeyError that is
not being handled in the decorator. Use os.getenv() instead.
Changing the default for max-recursion-queries from 100 to 32 was too
strict in some cases, especially lookups in reverse IPv6 trees started
to fail more frequently. From issue #4921 it looks like 50 is a better
default.
Now that we have 'max-query-count' as a global limit of outgoing queries
per client request, we can increase the default for
'max-recursion-queries' again, as the number of recursive queries is
no longer bound by the multiple of 'max-recursion-queries' and
'max-query-restarts'.
This adds a new test directory specifically for CAMP attacks. This first
test in this test directory follows multiple CNAME chains, restarting
the max-recursion-queries counter, but should bail when the global
maximum quota max-query-count is reached.
Add another option to configure how many outgoing queries per
client request is allowed. The existing 'max-recursion-queries' is
per restart, this one is a global limit.
The ns2/managed1.conf file is created by the setup.sh script. Then, in
the tests.sh script it is moved to ns2/managed.conf. The latter file
name is in mkeys extra_artifacts, but the former one is not. This is a
problem when pytest is started with the --setup-only option as it only
runs the setup.sh script (e.g., in the cross-version-config-tests CI
job) and thus failing the "Unexpected files found" assertion.
the generated grammar for named.conf clauses that may or may not be
enabled at compile time will now print the same comment regardless of
whether or not they are.
previously, the grammar didn't print a comment if an option was enabled,
but printed "not configured" if it was disabled. now, in both cases,
it will say "optional (only available if configured)".
as an incidental fix, clarified the documentation for "named-checkconf -n".
When the tests were added, the files were generated without FIPS
compatibility in mind. That made the tests fail on recent OpenSSL
versions in FIPS mode.
So, the files were regenerated on a FIPS compliant system using the
following stanza:
$ openssl dhparam -out <file> 3072
Apparently, the old files are not valid for FIPS starting with OpneSSL
3.1.X release series as "FIPS 140-3 compliance changes" are mentioned
in the changelog:
https://openssl-library.org/news/openssl-3.1-notes/
Add support for Extended DNS Errors (EDE) error 22: No reachable
authority. This occurs when after a timeout delay when the resolver is
trying to query an authority server.
The lame-ttl processing was overriden to be disabled in the config,
but the code related to the lame-ttl was still kept in the resolver
code. More importantly, the DNS_RESOLVER_BADCACHETTL() macro would
cause the entries in the resolver badcache to be always cached for at
least 30 seconds even if the lame-ttl would be set to 0.
Remove the dns_badcache code from the dns_resolver unit, so we save some
processing time and memory in the resolver code.
Instead of cleaning the dns_badcache opportunistically, add per-loop
LRU, so each thread-loop can clean the expired entries. This also
allows removal of the atomic operations as the badcache entries are now
immutable, instead of updating the badcache entry in place, the old
entry is now deleted from the hashtable and the LRU list, and the new
entry is inserted in the LRU.
The nslookup system test checks the count of resolved addresses in
the CNAME tests using a 'grep' match on the hostname, and ignoring
lines containing the 'canonical name' string. In order to protect
the check from intermittent failures like the 'address in use' warning
message, which then automatically resolves after a retry, edit the
'grep' matching string to also ignore the comments (as the mentioned
warning message is a comment which contains the hostname).
Add test cases which check that when a XoT primary server is
unreachable or is already marked as unreachble then the next
primary server in the list is used.
Previously a ISC_R_CANCELED result code switch-case has been added to
the zone.c:zone_xfrdone() function, which did two things:
1. Schedule a new zone transfer if there's a scheduled force reload of
the zone.
2. Reset the primaries list.
This proved to be not a well-thought change and causes problems,
because the ISC_R_CANCELED code is used not only when the whole transfer
is canceled, but also when, for example, a particular primary server is
unreachable, and named still needs to continue the transfer process by
trying the next server, which it now no longer does in some cases. To
solve this issue, three changes are made:
1. Make sure dns_zone_refresh() runs on the zone's loop, so that the
sequential calls of dns_zone_stopxfr() and dns_zone_forcexfr()
functions (like done in 'rndc retransfer -force') run in intended
order and don't race with each other.
2. Since starting the new transfer is now guaranteed to run after the
previous transfer is shut down (see the previous change), remove the
special handling of the ISC_R_CANCELED case, and let the default
handler to handle it like before. This will bring back the ability to
try the next primary if the current one was interrupted with a
ISC_R_CANCELED result code.
3. Change the xfrin.c:xfrin_shutdown() function to pass the
ISC_R_SHUTTINGDOWN result code instead of ISC_R_CANCELED, as it makes
more sense.
Stop using ns_listenlist_default() to set the default listen-on
and listen-on-v6 configuration. Instead, configure these options
using the default values in config.c.
This change adds a "none" parameter to the query-source[-v6]
options in named.conf, which forbid the usage of IPv4 or IPv6
addresses when doing upstream queries.
On some slow systems, the test might intermittently fail due to inherent
timing issues. In our CI, this most often happens in the
system:gcc:8fips:amd64 jobs.
Add query counters for DoT, DoH, unencrypted DoH and their proxied
counterparts. The protocols don't increment TCP/UDP counters anymore
since they aren't the same as plain DNS-over-53.
The usage of port and tls arguments in *-source and *-source-v6 named
configuration options has been previously removed. Remove
configuration check deprecating usage of those arguments.
Reintroduce logic to apply diffs when the number of pending tuples is
above 128. The previous strategy of accumulating all the tuples and
pushing them at the end leads to excessive memory consumption during
transfer.
This effectively reverts half of e3892805d6
To enable FIPS mode at runtime use 'delv -F'. The operating system
must have FIPS support available for this to succeed. This is on
by default when built with --enable-fips-mode.
To enable FIPS mode at runtime use 'dig -F'. The operating system
must have FIPS support available for this to succeed. This is on
by default when built with --enable-fips-mode.
When a test is re-run by the flaky plugin, the TestReport outcomes
collected in the pytest_runtest_makereport() hook should be overriden.
Each of the setup/call/teardown phases is reported again and since we
care about the overall outcome, their respective results should be
overriden so that only the outcome from the final test (re)run gets
reported.
Prior to this change, it lead to a situation where an extra_artifact
generated during the test might be ignored. This was caused because the
check was skipped, since the test was incorrectly considered as "failed"
in the case where the test would fail on the first run, but pass on a
subsequent flaky rerun.
QPDB is now a default implementation for both cache and zone. Remove
the venerable RBTDB database implementation, so we can fast-track the
changes to the database without having to implement the design changes
to both QPDB and RBTDB and this allows us to be more aggressive when
refactoring the database design.
Prior to introducing the pytest runner, clean.sh files were used as a
list of files that the test is expected to leave around as artifacts and
check that no extra files were created.
With the pytest runner, those scripts are no longer used, but the
ability to detect extraneous files is still useful. Add a new
"extra_artifacts" mark which can be used for the same purpose.
Originally, the dns_dbversion_t was typedef'ed to void type. This
allowed some flexibility, but using (void *) just removes any
type-checking that C might have. Instead of using:
typedef void dns_dbversion_t;
use a trick to define the type to non-existing structure:
typedef struct dns_dbversion dns_dbversion_t;
This allows the C compilers to employ the type-checking while the
structure itself doesn't have to be ever defined because the actual
'storage' is never accessed using dns_dbversion_t type.
