This change adds a "none" parameter to the query-source[-v6]
options in named.conf, which forbid the usage of IPv4 or IPv6
addresses when doing upstream queries.
The usage of port and tls arguments in *-source and *-source-v6 named
configuration options has been previously removed. Remove
configuration check deprecating usage of those arguments.
QPDB is now a default implementation for both cache and zone. Remove
the venerable RBTDB database implementation, so we can fast-track the
changes to the database without having to implement the design changes
to both QPDB and RBTDB and this allows us to be more aggressive when
refactoring the database design.
The query-source option has the slight quirk of allowing the address to
be specified in two ways, either as every other source option, or as an
"address" key-value pair.
For this reason, it had a separate parsing function from other X-source
options, but it is possible to extend the parsing of other X-sources to
be generic and also handle query-source.
This commit just does that.
the logging of error-report queries is no longer activated by
the view's "send-report-channel" option; that now only configures
the agent-domain value that is to be sent in authoritative
responses. the warning that was logged when "send-agent-domain"
was set to a value that is not a locally configured zone has
been removed.
error-report logging is now activated by the presence of an
authoritative zone with the "log-report-channel" option set to
"yes". this is not permitted in the root zone.
NOTE: a zone with "log-report-channel yes;" should contain a
"*._er" wildcard, but that requirement is not yet enforced.
add a boolean "log-report-channel" option for primary and
secondary zones, which sets the DNS_ZONEOPT_LOGREPORTS zone
flag. this option is not yet functional.
If send-report-channel is set at the zone level, it will
be stored in the zone object and used instead of the
view-level agent-domain when constructing the EDNS
Report-Channel option.
This commit adds support for the EDNS Report-Channel option,
which is returned in authoritative responses when EDNS is in use.
"send-report-channel" sets the Agent-Domain value that will be
included in EDNS Report-Channel options. This is configurable at
the options/view level; the value is a DNS name. Setting the
Agent-Domain to the root zone (".") disables the option.
When this value has been set, incoming queries matchng the form
_er.<qtype>.<qname>.<extended-error-code>._er.<agent-domain>/TXT
will be logged to the dns-reporting-agent channel at INFO level.
(Note: error reporting queries will only be accepted if sent via
TCP or with a good server cookie. If neither is present, named
returns BADCOOKIE to complete the DNS COOKIE handshake, or TC=1
to switch the client to TCP.)
When DSCP was removed the parsing of hostnames was accidentally
broken resulting in an assertion failure. Call cfg_parse_tuple
rather than using custom code in parse_sockaddrnameport.
This commit adds support for timestamps in iso8601 format with timezone
when logging. This is exposed through the iso8601-tzinfo printtime
suboption.
It also makes the new logging format the default for -g output,
hopefully removing the need for custom timestamp parsing in scripts.
This commit nulls all type fields for the clausedef lists that are
declared ancient, and removes the corresponding cfg_type_t and parsing
functions when they are found to be unused after the change.
DNSRPS was the API for a commercial implementation of Response-Policy
Zones that was supposedly better. However, it was never open-sourced
and has only ever been available from a single vendor. This goes against
the principle that the open-source edition of BIND 9 should contain only
features that are generally available and universal.
This commit removes the DNSRPS implementation from BIND 9. It may be
reinstated in the subscription edition if there's enough interest from
customers, but it would have to be rewritten as a plugin (hook) instead
of hard-wiring it again in so many places.
Remove the use of "port" when configuring query-source(-v6),
transfer-source(-v6), notify-source(-v6), parental-source(-v6),
etc. Remove the use of source ports for parental-agents.
Also remove the deprecated options use-{v4,v6}-udp-ports and
avoid-{v4,v6}udp-ports.
named-checkconf now takes "-n" to ignore "not configured" errors.
This allows named-checkconf to check the syntax of configurations
from other builds which have support for more options.
This limits the maximum number of received incremental zone
transfer differences for a secondary server. Upon reaching the
confgiured limit, the secondary aborts IXFR and initiates a full
zone transfer (AXFR).
Add a new configuration option to enable Offline KSK key management.
Offline KSK cannot work with CSK because it splits how keys with the
KSK and ZSK role operate. Therefore, one key cannot have both roles.
Add a configuration check to ensure this.
Remove the complicated mechanism that could be (in theory) used by
external libraries to register new categories and modules with
statically defined lists in <isc/log.h>. This is similar to what we
have done for <isc/result.h> result codes. All the libraries are now
internal to BIND 9, so we don't need to provide a mechanism to register
extra categories and modules.
Add isc_logconfig_get() function to get the current logconfig and use
the getter to replace most of the little dancing around setting up
logging in the tools. Thus:
isc_log_create(mctx, &lctx, &logconfig);
isc_log_setcontext(lctx);
dns_log_setcontext(lctx);
...
...use lcfg...
...
isc_log_destroy();
is now only:
logconfig = isc_logconfig_get(lctx);
...use lcfg...
For thread-safety, isc_logconfig_get() should be surrounded by RCU read
lock, but since we never use isc_logconfig_get() in threaded context,
the only place where it is actually used (but not really needed) is
named_log_init().
As we now setup the logging very early, parsing the default config would
always print warnings about experimental (and possibly deprecated)
options in the default config. This would even mess with commands like
`named -V` and it is also wrong to warn users about using experimental
options in the default config, because they can't do anything about
this. Add CFG_PCTX_NODEPRECATED and CFG_PCTX_NOEXPERIMENTAL options
that we can pass to cfg parser and silence the early warnings caused by
using experimental options in the default config.
implement, document, and test the 'max-query-restarts' option
which specifies the query restart limit - the number of times
we can follow CNAMEs before terminating resolution.
The OpenSSL 1.x Engines support has been deprecated in the OpenSSL 3.x
and is going to be removed. Remove the OpenSSL Engine support in favor
of OpenSSL Providers.
Since the minimal OpenSSL version is now OpenSSL 1.1.1, remove all kind
of OpenSSL shims and checks for functions that are now always present in
the OpenSSL libraries.
Co-authored-by: Ondřej Surý <ondrej@isc.org>
Co-authored-by: Aydın Mercan <aydin@isc.org>
A different solution in the future might be adopted depending
on feedback and other new information, so it makes sense to mark
these options as EXPERIMENTAL until we have more data.
In order to protect from a malicious DNS client that sends many
queries with a SIG(0)-signed message, add a quota of simultaneously
running SIG(0) checks.
This protection can only help when named is using more than one worker
threads. For example, if named is running with the '-n 4' option, and
'sig0checks-quota 2;' is used, then named will make sure to not use
more than 2 workers for the SIG(0) signature checks in parallel, thus
leaving the other workers to serve the remaining clients which do not
use SIG(0)-signed messages.
That limitation is going to change when SIG(0) signature checks are
offloaded to "slow" threads in a future commit.
The 'sig0checks-quota-exempt' ACL option can be used to exempt certain
clients from the quota requirements using their IP or network addresses.
The 'sig0checks-quota-maxwait-ms' option is used to define a maximum
amount of time for named to wait for a quota to appear. If during that
time no new quota becomes available, named will answer to the client
with DNS_R_REFUSED.
Previously, the number of RR types for a single owner name was limited
only by the maximum number of the types (64k). As the data structure
that holds the RR types for the database node is just a linked list, and
there are places where we just walk through the whole list (again and
again), adding a large number of RR types for a single owner named with
would slow down processing of such name (database node).
Add a configurable limit to cap the number of the RR types for a single
owner. This is enforced at the database (rbtdb, qpzone, qpcache) level
and configured with new max-types-per-name configuration option that
can be configured globally, per-view and per-zone.
Previously, the number of RRs in the RRSets were internally unlimited.
As the data structure that holds the RRs is just a linked list, and
there are places where we just walk through all of the RRs, adding an
RRSet with huge number of RRs inside would slow down processing of said
RRSets.
Add a configurable limit to cap the number of the RRs in a single RRSet.
This is enforced at the database (rbtdb, qpzone, qpcache) level and
configured with new max-records-per-type configuration option that can
be configured globally, per-view and per-zone.
Be stricter in durations that are accepted. Basically we accept ISO 8601
formats, but fail to detect garbage after the integers in such strings.
For example, 'P7.5D' will be treated as 7 days. Pass 'endptr' to
'strtoll' and check if the endptr is at the correct suffix.
by default, QPDB is the database used by named and all tools and
unit tests. the old default of RBTDB can now be restored by using
"configure --with-zonedb=rbt --with-cachedb=rbt".
some tests have been fixed so they will work correctly with either
database.
CHANGES and release notes have been updated to reflect this change.
replace the string "rbt" throughout BIND with "qp" so that
qpdb databases will be used by default instead of rbtdb.
rbtdb databases can still be used by specifying "database rbt;"
in a zone statement.
Using the 'dnssec-validation yes' option now requires an explicitly
confgiured 'trust-anchors' statement (or 'managed-keys' or
'trusted-keys', both deprecated).
Instead of running all the cryptographic validation in a tight loop,
spread it out into multiple event loop "ticks", but moving every single
validation into own isc_async_run() asynchronous event. Move the
cryptographic operations - both verification and DNSKEY selection - to
the offloaded threads (isc_work_enqueue), this further limits the time
we spend doing expensive operations on the event loops that should be
fast.
Limit the impact of invalid or malicious RRSets that contain crafted
records causing the dns_validator to do many validations per single
fetch by adding a cap on the maximum number of validations and maximum
number of validation failures that can happen before the resolving
fails.
the 'low', 'high' and 'discount' parameters to 'fetch-quota-param'
are meant to be ratios with values between zero and one, but higher
values can be assigned. this could potentially lead to an assertion
in maybe_adjust_quota().
