named now prints its initial working directory during startup and the
changed working directory when loading or reloading its configuration
file if it has a valid 'directory' option defined.
(cherry picked from commit fd8e1d161f)
This condition in catalog zone processing functions is checked only
for sanity, so there is no meaning for a log message that normally
shouldn't be ever logged.
(cherry picked from commit 0b3c8ee55e6cda1f2de35aa15f6a4d82d072c309)
During a reconfiguration named doesn't reconfigure catalog zones
member zones. Implement the necessary code to reconfigure catz
member zones.
(cherry picked from commit fd71ed5d73ae2dc968e8782ce652fb8ef257c25e)
implement, document, and test the 'max-query-restarts' option
which specifies the query restart limit - the number of times
we can follow CNAMEs before terminating resolution.
(cherry picked from commit 104f3b82fb)
Instead of randomly using -1 or 1 as a failure status, properly utilize
the EXIT_FAILURE define that's platform specific (as it should be).
(cherry picked from commit76997983fde02d9c32aa23bda30b65f1ebd4178c)
Since the fatal() isn't a correct but rather abrupt termination of the
program, we want to skip the various atexit() calls because not all
memory might be freed during fatal() call, etc. Using _exit() instead
of exit() has this effect - the program will end, but no destructors or
atexit routines will be called.
(cherry picked from commit 4bec711fe3)
Previously, the number of RR types for a single owner name was limited
only by the maximum number of the types (64k). As the data structure
that holds the RR types for the database node is just a linked list, and
there are places where we just walk through the whole list (again and
again), adding a large number of RR types for a single owner named with
would slow down processing of such name (database node).
Add a configurable limit to cap the number of the RR types for a single
owner. This is enforced at the database (rbtdb, qpzone, qpcache) level
and configured with new max-types-per-name configuration option that
can be configured globally, per-view and per-zone.
(cherry picked from commit 00d16211d6368b99f070c1182d8c76b3798ca1db)
Previously, the number of RRs in the RRSets were internally unlimited.
As the data structure that holds the RRs is just a linked list, and
there are places where we just walk through all of the RRs, adding an
RRSet with huge number of RRs inside would slow down processing of said
RRSets.
Add a configurable limit to cap the number of the RRs in a single RRSet.
This is enforced at the database (rbtdb, qpzone, qpcache) level and
configured with new max-records-per-type configuration option that can
be configured globally, per-view and per-zone.
(cherry picked from commit 3fbd21f69a1bcbd26c4c00920e7b0a419e8762fc)
When the cache's memory context was in over memory state when the
cache was flushed it resulted in LRU cleaning removing newly entered
data in the new cache straight away until the old cache had been
destroyed enough to take it out of over memory state. When flushing
the cache create a new memory context for the new db to prevent this.
(cherry picked from commit 5e77edd074)
With weak zone attachments being used for catzs, catzs->view->zonetable
may be NULL so we need to account for this which dns_view_findzone
does. This is already done in main.
When -X is used the 'lock-file' option change detection condition
is invalid, because it compares the 'lock-file' option's value to
the '-X' argument's value instead of the older 'lock-file' option
value (which was ignored because of '-X').
Don't warn about changing 'lock-file' option if '-X' is used.
(cherry picked from commit 41945b32d7)
It is obvious that the '!cfg_obj_asstring(obj)' check should be
'cfg_obj_asstring(obj)' instead, because it is an AND logic chain
which further uses 'obj' as a string.
Fix the error.
(cherry picked from commit bc891e749f)
When 'lock-file <lockfile>' is used in configuration at the same time
as using '-X none' in 'named' invocation, there is an invalid
logic that would lead to a isc_mem_strdup() call on a NULL value.
Also, contradicting to ARM, 'lock-file none' is overriding the '-X'
argument.
Fix the overall logic, and make sure that the '-X' takes precedence to
'lock-file'.
(cherry picked from commit fc2dd09390)
When 'lock-file <lockfile1>' was used in configuration at the same time
as using `-X <lockfile2>` in `named` invocation, there was an invalid
logic that would lead to a double isc_mem_strdup() call on the
<lockfile2> value.
Skip the second allocation if `lock-file` is being used in
configuration, so the <lockfile2> is used only single time.
(cherry picked from commit 4f68def5e9)
it was possible to add a TSIG key to more than one TSIG
keyring at a time, and this was in fact happening with the
session key, which was generated once and then added to the
keyrings for each view as it was configured.
this has been corrected and a REQUIRE added to dns_tsigkeyring_add()
to prevent it from happening again.
These options and zone type were created to address the
SiteFinder controversy, in which certain TLD's redirected queries
rather than returning NXDOMAIN. since TLD's are now DNSSEC-signed,
this is no longer likely to be a problem.
The deprecation message for 'type delegation-only' is issued from
the configuration checker rather than the parser. therefore,
isccfg_check_namedconf() has been modified to take a 'nodeprecate'
parameter to suppress the warning when named-checkconf is used with
the command-line option to ignore warnings on deprecated options (-i).
(cherry picked from commit 2399556bee)
During reconfiguration, the configure_view() function reverts the
configured zones to the previous view in case if there is an error.
It uses the 'zones_configured' boolean variable to decide whether
it is required to revert the zones, i.e. the error happened after
all the zones were successfully configured.
The problem is that it does not account for the case when an error
happens during the configuration of one of the zones (not the first),
in which case there are zones that are already configured for the
new view (and they need to be reverted), and there are zones that
are not (starting from the failed one).
Since 'zones_configured' remains 'false', the configured zones are
not reverted.
Replace the 'zones_configured' variable with a pointer to the latest
successfully configured zone configuration element, and when reverting,
revert up to and including that zone.
(cherry picked from commit 84c235a4b0)
This change should make sure that catalog zone update processing
doesn't happen when the catalog zone is being shut down. This
should help avoid races when offloading the catalog zone updates
in the follow-up commit.
(cherry picked from commit 246b7084d6)
* Change 'dns_catz_new_zones()' function's prototype (the order of the
arguments) to synchronize it with the similar function in rpz.c.
* Rename 'refs' to 'references' in preparation of ISC_REFCOUNT_*
macros usage for reference tracking.
* Unify dns_catz_zone_t naming to catz, and dns_catz_zones_t naming to
catzs, following the logic of similar changes in rpz.c.
* Use C compound literals for structure initialization.
* Synchronize the "new zone version came too soon" log message with the
one in rpz.c.
* Use more of 'sizeof(*ptr)' style instead of the 'sizeof(type_t)' style
expressions when allocating or freeing memory for 'ptr'.
(cherry picked from commit 8cb79fec9d)
When switching to a new view during a reconfiguration (or reverting
to the old view), detach the 'rpzs' and 'catzs' from the previuos view.
The 'catzs' case was earlier solved slightly differently, by detaching
from the new view when reverting to the old view, but we can not solve
this the same way for 'rpzs', because now in BIND 9.19 and BIND 9.18
a dns_rpz_shutdown_rpzs() call was added in view's destroy() function
before detaching the 'rpzs', so we can not leave the 'rpzs' attached to
the previous view and let it be shut down when we intend to continue
using it with the new view.
Instead, "re-fix" the issue for the 'catzs' pointer the same way as
for 'rpzs' for consistency, and also because a similar shutdown call
is likely to be implemented for 'catzs' in the near future.
(cherry picked from commit 121a095a22)
this function was just a front-end for gethostname(). it was
needed when we supported windows, which has a different function
for looking up the hostname; it's not needed any longer.
(cherry picked from commit 197334464e)
The dns_rpz_zones structure was using .refs and .irefs for strong and
weak reference counting. Rewrite the unit to use just a single
reference counting + shutdown sequence (dns_rpz_destroy_rpzs) that must
be called by the creator of the dns_rpz_zones_t object. Remove the
reference counting from the dns_rpz_zone structure as it is not needed
because the zone objects are fully embedded into the dns_rpz_zones
structure and dns_rpz_zones_t object must never be destroyed before all
dns_rpz_zone_t objects.
The dns_rps_zones_t reference counting uses the new ISC_REFCOUNT_TRACE
capability - enable by defining DNS_RPZ_TRACE in the dns/rpz.h header.
Additionally, add magic numbers to the dns_rpz_zone and dns_rpz_zones
structures.
(cherry picked from commit 77659e7392)
it was possible for a managed trust anchor needing to send a key
refresh query to be unable to do so because an authoritative zone
was not yet loaded. this has been corrected by delaying the
synchronization of managed-keys zones until after all zones are
loaded.
(cherry-picked from commit bafbbd2465)
The reference counting and isc_timer_attach()/isc_timer_detach()
semantic are actually misleading because it cannot be used under normal
conditions. The usual conditions under which is timer used uses the
object where timer is used as argument to the "timer" itself. This
means that when the caller is using `isc_timer_detach()` it needs the
timer to stop and the isc_timer_detach() does that only if this would be
the last reference. Unfortunately, this also means that if the timer is
attached elsewhere and the timer is fired it will most likely be
use-after-free, because the object used in the timer no longer exists.
Remove the reference counting from the isc_timer unit, remove
isc_timer_attach() function and rename isc_timer_detach() to
isc_timer_destroy() to better reflect how the API needs to be used.
The only caveat is that the already executed event must be destroyed
before the isc_timer_destroy() is called because the timer is no longet
attached to .ev_destroy_arg.
(cherry picked from commit ae01ec2823)
When we change the view in the view->managed_keys, we never commit the
change, keeping the previous view possibly attached forever.
Call the dns_zone_setviewcommit() immediately after changing the view as
we are detaching the previous view anyway and there's no way to recover
from that.
(cherry picked from commit 7e8b53720d)
DSCP has not been fully working since the network manager was
introduced in 9.16, and has been completely broken since 9.18.
This seems to have caused very few difficulties for anyone,
so we have now marked it as obsolete and removed the
implementation.
To ensure that old config files don't fail, the code to parse
dscp key-value pairs is still present, but a warning is logged
that the feature is obsolete and should not be used. Nothing is
done with configured values, and there is no longer any
range checking.
(cherry picked from commit 916ea26ead)
This bug was masked in the tests because the `catz` test script did an
`rndc addzone` before an `rndc delzone`. The `addzone` autovivified
the NZF config, so `delzone` worked OK.
This commit swaps the order of two sections of the `catz` test script
so that it uses `delzone` before `addzone`, which provokes a crash
when `delzone` requires a non-NULL NZF config.
To fix the crash, we now try to remove the zone from the NZF config
only if it was dynamically added but not by a catalog zone.
(cherry picked from commit 9fa20d6f6c)
Additionally to renaming, it changes the function definition so that
it accepts a pointer to pointer instead of returning a pointer to the
new object.
It is mostly done to make it in line with other functions in the
module.
(cherry picked from commit f102df96b8)
[bug] Changes to the RPZ response-policy min-update-interval
and add-soa options now take effect as expected when
named is reconfigured. [GL #3740]
(cherry picked from commit d8a3d328db)
There were a number of places where the zone table should have been
locked, but wasn't, when dns_zt_apply was called.
Added a isc_rwlocktype_t type parameter to dns_zt_apply and adjusted
all calls to using it. Removed locks in callers.
(cherry picked from commit f053d5b414)
If after a reconfig a zone is not reusable because inline-signing
was turned on/off, trigger a full resign. This is necessary because
otherwise the zone maintenance may decide to only apply the changes
in the journal, leaving the zone in an inconsistent DNSSEC state.
(cherry picked from commit 4d143f2cc4)
The "prefetch" setting is in "defaultconf" so it cannot fail, use
INSIST to confirm that.
The 'trigger' and 'eligible' variables are now prefixed with
'prefetch_' and their declaration moved to an upper level, because
there is no more additional code block after this change.
(cherry picked from commit 0227565cf1)
Mostly generated automatically with the following semantic patch,
except where coccinelle was confused by #ifdef in lib/isc/net.c
@@ expression list args; @@
- UNEXPECTED_ERROR(__FILE__, __LINE__, args)
+ UNEXPECTED_ERROR(args)
@@ expression list args; @@
- FATAL_ERROR(__FILE__, __LINE__, args)
+ FATAL_ERROR(args)
(cherry picked from commit ec50c58f52)
There was a ubsan error reporting an invalid value for interface_auto
(a boolean value cannot be 190) because it was not initialized. To
avoid this problem happening again, ensure the whole of the server
structure is initialized to zero before setting the (relatively few)
non-zero elements.
The BUFSIZ value varies between platforms, it could be 8K on Linux and
512 bytes on mingw. Make sure the buffers are always big enough for the
output data to prevent truncation of the output by appropriately
enlarging or sizing the buffers.
(cherry picked from commit b19d932262e84608174cb89eeed32ae0212f8a87)
We do this by adding callbacks for when a node is added or deleted
from the keytable. dns_keytable_add and dns_keytable_delete where
extended to take a callback. dns_keytable_deletekey does not remove
the node so it was not extended.
(cherry picked from commit a5b57ed293)
This way only quota size is passed to the interface/listener
management code instead of a quota object. Thus, we can implement
updating the quota object size instead of recreating the object.
(cherry picked from commit 3f0b310772)
