DSCP has not been fully working since the network manager was
introduced in 9.16, and has been completely broken since 9.18.
This seems to have caused very few difficulties for anyone,
so we have now marked it as obsolete and removed the
implementation.
To ensure that old config files don't fail, the code to parse
dscp key-value pairs is still present, but a warning is logged
that the feature is obsolete and should not be used. Nothing is
done with configured values, and there is no longer any
range checking.
Send the ns_query_cancel() on the recursing clients when we initiate the
named shutdown for faster shutdown.
When we are shutting down the resolver, we cancel all the outstanding
fetches, and the ISC_R_CANCEL events doesn't propagate to the ns_client
callback.
In the future, the better solution how to fix this would be to look at
the shutdown paths and let them all propagate from bottom (loopmgr) to
top (f.e. ns_client).
the 'nupdates' field was originally used to track whether a client
was ready to shut down, along with other similar counters nreads,
nrecvs, naccepts and nsends. this is now tracked differently, but
nupdates was overlooked when the other counters were removed.
Don't attempt to resolve DNS responses for intermediate results. This
may create multiple refreshes and can cause a crash.
One scenario is where for the query there is a CNAME and canonical
answer in cache that are both stale. This will trigger a refresh of
the RRsets because we encountered stale data and we prioritized it over
the lookup. It will trigger a refresh of both RRsets. When we start
recursing, it will detect a recursion loop because the recursion
parameters will eventually be the same. In 'dns_resolver_destroyfetch'
the sanity check fails, one of the callers did not get its event back
before trying to destroy the fetch.
Move the call to 'query_refresh_rrset' to 'ns_query_done', so that it
is only called once per client request.
Another scenario is where for the query there is a stale CNAME in the
cache that points to a record that is also in cache but not stale. This
will trigger a refresh of the RRset (because we encountered stale data
and we prioritized it over the lookup).
We mark RRsets that we add to the message with
DNS_RDATASETATTR_STALE_ADDED to prevent adding a duplicate RRset when
a stale lookup and a normal lookup conflict with each other. However,
the other non-stale RRset when following a CNAME chain will be added to
the message without setting that attribute, because it is not stale.
This is a variant of the bug in #2594. The fix covered the same crash
but for stale-answer-client-timeout > 0.
Fix this by clearing all RRsets from the message before refreshing.
This requires the refresh to happen after the query is send back to
the client.
Previously:
* applications were using isc_app as the base unit for running the
application and signal handling.
* networking was handled in the netmgr layer, which would start a
number of threads, each with a uv_loop event loop.
* task/event handling was done in the isc_task unit, which used
netmgr event loops to run the isc_event calls.
In this refactoring:
* the network manager now uses isc_loop instead of maintaining its
own worker threads and event loops.
* the taskmgr that manages isc_task instances now also uses isc_loopmgr,
and every isc_task runs on a specific isc_loop bound to the specific
thread.
* applications have been updated as necessary to use the new API.
* new ISC_LOOP_TEST macros have been added to enable unit tests to
run isc_loop event loops. unit tests have been updated to use this
where needed.
* isc_timer was rewritten using the uv_timer, and isc_timermgr_t was
completely removed; isc_timer objects are now directly created on the
isc_loop event loops.
* the isc_timer API has been simplified. the "inactive" timer type has
been removed; timers are now stopped by calling isc_timer_stop()
instead of resetting to inactive.
* isc_manager now creates a loop manager rather than a timer manager.
* modules and applications using isc_timer have been updated to use the
new API.
This way only quota size is passed to the interface/listener
management code instead of a quota object. Thus, we can implement
updating the quota object size instead of recreating the object.
Similarly to how different code paths reused common client handle
pointers and fetch references despite being logically unrelated, they
also reuse client->recursionquota, the field in which a reference to the
recursion quota is stored. This unnecessarily forces all code using
that field to be aware of the fact that it is overloaded by different
features.
Overloading client->recursionquota also causes inconsistent behavior.
For example, if prefetch code triggers recursion and then delegation
handling code also triggers recursion, only one of these code paths will
be able to attach to the recursion quota, but both recursions will be
started anyway. In other words, each code path only checks whether the
recursion quota has not been exceeded if the quota has not yet been
attached to by another code path. This behavior theoretically allows
the configured recursion quota to be slightly exceeded; while it is not
expected to be a real-world operational issue, it is still confusing and
should therefore be fixed.
Extend the structures comprising the 'recursions' array with a new field
holding a pointer to the recursion quota that a given recursion process
attached to. Update all code paths using client->recursionquota so that
they use the appropriate slot in the 'recursions' array. Drop the
'recursionquota' field from ns_client_t.
Drop the 'fetchhandle' field from ns_client_t as all code using it has
been migrated to use the recursion-type-specific HANDLE_RECTYPE_*()
macros.
Drop the 'fetch' field from ns_query_t as all code using it has been
migrated to use the recursion-type-specific FETCH_RECTYPE_*() macros.
Async hooks are the last feature using the client->fetchhandle and
client->query.fetch pointers. Update ns_query_hookasync() and
query_hookresume() so that they use a dedicated slot in the 'recursions'
array. Note that async hooks are still not expected to initiate
recursion if one was already started by a prior ns_query_recurse() call,
so the REQUIRE assertion in ns_query_hookasync() needs to check the
RECTYPE_NORMAL slot rather than the RECTYPE_HOOK one.
With prefetch and RPZ code updated to use separate slots in the
'recursions' array, the code responsible for starting recursion in
ns_query_recurse() and resuming query handling in fetch_callback()
should follow suit, so that it does not need to explicitly cooperate
with other code paths that may initiate recursion.
Replace:
- client->fetchhandle with HANDLE_RECTYPE_NORMAL(client)
- client->query.fetch with FETCH_RECTYPE_NORMAL(client)
Also update other functions using client->fetchhandle and
client->query.fetch (ns_query_cancel(), query_usestale()) so that those
two fields can shortly be dropped altogether.
Replace:
- client->prefetchhandle with HANDLE_RECTYPE_PREFETCH(client)
- client->query.prefetch with FETCH_RECTYPE_PREFETCH(client)
This is preparatory work for separating prefetch code from RPZ code.
When a client waits for a prefetch- or RPZ-triggered recursion to
complete, its netmgr handle is attached to client->prefetchhandle and a
reference to the resolver fetch is stored in client->query.prefetch.
Both of these features use the same fields mentioned above. This makes
the code fragile and hard to follow as its logically distinct parts
become intertwined for no obvious reason.
Furthermore, storing pointers related to a specific recursion process in
two different structures makes their purpose harder to grasp than it has
to be.
To alleviate the problem, extend ns_query_t with an array of structures
containing recursion-related pointers. Each feature able to initiate
recursion is supposed to use its own slot in that array, allowing
logically unrelated code paths to be untangled. Prefetch and RPZ will
be the first users of that array.
Define helper macros for accessing specific recursion-related pointers
in order to improve code readability.
This commit disables periodic interface re-scans timer on Linux where
a kernel-based dynamic interface mechanisms make it a thing of the
past in most cases.
In order to modify the .localhost and .localnets members of the
dns_aclenv, all other processing on the netmgr loops needed to be
stopped using the task exclusive mode. Add the isc_rwlock to the
dns_aclenv, so any modifications to the .localhost and .localnets can be
done under the write lock.
The .lock, .exiting and .excl members were not using for anything else
than starting task exclusive mode, setting .exiting to true and ending
exclusive mode.
Remove all the stray members and dead code eliminating the task
exclusive mode use from ns_clientmgr.
This commit adds support for Strict/Mutual TLS into BIND. It does so
by implementing the backing code for 'hostname' and 'ca-file' options
of the 'tls' statement. The commit also updates the documentation
accordingly.
The way the ns_client_t .shuttingdown member was practically dead code.
The .shuttingdown would be set to true only in ns__client_put() function
meaning that we have detached from all ns_client_t .*handles and the
ns_client_t object being freed:
client->magic = 0;
client->shuttingdown = true;
[...]
isc_mem_put(manager->ctx, client, sizeof(*client))
Meanwhile the ns_client_t object is accessed like this:
isc_nmhandle_detach(&client->fetchhandle);
client->query.attributes &= ~NS_QUERYATTR_RECURSING;
client->state = NS_CLIENTSTATE_WORKING;
qctx_init(client, &devent, 0, &qctx);
client_shuttingdown = ns_client_shuttingdown(client);
if (fetch_canceled || fetch_answered || client_shuttingdown) {
[...]
}
Even if the isc_nmhandle_detach(...) was the last handle detach, it
would mean that immediatelly, after calling the isc_nmhandle_detach(),
we would be causing use-after-free, because the ns_client_t is
immediatelly destroyed after setting .shuttingdown to true.
The similar code in the query_hookresume() already noticed this:
/*
* This event is running under a client task, so it's safe to detach
* the fetch handle. And it should be done before resuming query
* processing below, since that may trigger another recursion or
* asynchronous hook event.
*/
The ns_client_t is always attached to ns_clientmgr_t which has
associated memory context, server context, task and threadid. Use those
directly from the ns_clientmgr_t instead of attaching it to an extra
copy in ns_client_t to make the ns_client_t more sleek and lean.
Additionally, remove some stray ns_client_t struct members that were not
used anywhere.
Instead of passing the "workers" variable back and forth along with
passing the single isc_nm_t instance, add isc_nm_getnworkers() function
that returns the number of netmgr threads are running.
Change the ns_interfacemgr and ns_taskmgr to utilize the newly acquired
knowledge.
Commit aab691d512 did not fix all possible
scenarios in which the ns_statscounter_recursclients counter underflows.
The solution implemented therein can be ineffective e.g. when CNAME
chaining happens with prefetching enabled.
Here is an example recursive resolution scenario in which the
ns_statscounter_recursclients counter can underflow with the current
logic in effect:
1. Query processing starts, the answer is not found in the cache, so
recursion is started. The NS_CLIENTATTR_RECURSING attribute is set.
ns_statscounter_recursclients is incremented (Δ = +1).
2. Recursion completes, returning a CNAME. client->recursionquota is
non-NULL, so the NS_CLIENTATTR_RECURSING attribute remains set.
ns_statscounter_recursclients is decremented (Δ = 0).
3. Query processing restarts.
4. The current QNAME (the target of the CNAME from step 2) is found in
the cache, with a TTL low enough to trigger a prefetch.
5. query_prefetch() attaches to client->recursionquota.
ns_statscounter_recursclients is not incremented because
query_prefetch() does not do that (Δ = 0).
6. Query processing restarts.
7. The current QNAME (the target of the CNAME from step 4) is not found
in the cache, so recursion is started. client->recursionquota is
already attached to (since step 5) and the NS_CLIENTATTR_RECURSING
attribute is set (since step 1), so ns_statscounter_recursclients is
not incremented (Δ = 0).
8. The prefetch from step 5 completes. client->recursionquota is
detached from in prefetch_done(). ns_statscounter_recursclients is
not decremented because prefetch_done() does not do that (Δ = 0).
9. Recursion for the current QNAME completes. client->recursionquota
is already detached from, i.e. set to NULL (since step 8), and the
NS_CLIENTATTR_RECURSING attribute is set (since step 1), so
ns_statscounter_recursclients is decremented (Δ = -1).
Another possible scenario is that after step 7, recursion for the target
of the CNAME from step 4 completes before the prefetch for the CNAME
itself. fetch_callback() then notices that client->recursionquota is
non-NULL and decrements ns_statscounter_recursclients, even though
client->recursionquota was attached to by query_prefetch() and therefore
not accompanied by an incrementation of ns_statscounter_recursclients.
The net result is also an underflow.
Instead of trying to properly handle all possible orderings of events
set into motion by normal recursion and prefetch-triggered recursion,
adjust ns_statscounter_recursclients whenever the recursive clients
quota is successfully attached to or detached from. Remove the
NS_CLIENTATTR_RECURSING attribute altogether as its only purpose is made
obsolete by this change.
The keep-response-order option has been obsoleted, and in this commit,
remove the keep-response-order ACL map rendering the option no-op, the
call the isc_nm_sequential() and the now unused isc_nm_sequential()
function itself.
While refactoring the lib/ns/xfrout.c, it was discovered that .shutdown
and .shutdown_arg members of ns_client_t structure are unused.
Remove the unused members and associated code that was using in it in
the ns_xfrout.
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
Using the TLS context cache for server-side contexts could reduce the
number of contexts to initialise in the configurations when e.g. the
same 'tls' entry is used in multiple 'listen-on' statements for the
same DNS transport, binding to multiple IP addresses.
In such a case, only one TLS context will be created, instead of a
context per IP address, which could reduce the initialisation time, as
initialising even a non-ephemeral TLS context introduces some delay,
which can be *visually* noticeable by log activity.
Also, this change lays down a foundation for Mutual TLS (when the
server validates a client certificate, additionally to a client
validating the server), as the TLS context cache can be extended to
store additional data required for validation (like intermediates CA
chain).
Additionally to the above, the change ensures that the contexts are
not being changed after initialisation, as such a practice is frowned
upon. Previously we would set the supported ALPN tags within
isc_nm_listenhttp() and isc_nm_listentlsdns(). We do not do that for
client-side contexts, so that appears to be an overlook. Now we set
the supported ALPN tags right after server-side contexts creation,
similarly how we do for client-side ones.
reference counting of ns_interface objects has not been used
since the clientmgr cleanup in #2433, and it no longer really
makes sense now - when we want to destroy an interface on a
rescan, we want it to be destroyed, not kept active by some
other caller. so ns_interface_attach() has been removed,
ns_interface_detach() has been replaced with a static
interface_destroy(), and do_scan() has been simplified
accordingly.
previously, if "listen-on-v6" was set to "none", then every
time a scan saw an IPv6 address it would appear to be a new
one. this commit retains all known interfaces in a list
and sets a flag in the ones that are listening, so that
configured interfaces that have been seen before will be
recognized as such.
as an incidental fix, the ns__interfacemgr_getif() and _nextif()
functions have been removed since they were never used.
The 850e9e59bf commit intended to recreate
the HTTPS and TLS interfaces during reconfiguration, but they are being
recreated also during regular interface re-scans.
Make sure the HTTPS and TLS interfaces are being recreated only during
reconfiguration.
Add a new parameter to 'ns_client_t' to store potential extended DNS
error. Reset when the client request ends, or is put back.
Add defines for all well-known info-codes.
Update the number of DNS_EDNSOPTIONS that we are willing to set.
Create a new function to set the extended error for a client reply.
Some of the libns unit tests override the isc_nmhandle_attach() and
_detach() functions. This causes a failure in ns_interface_create()
if a route socket is being used, so we add a parameter to disable it.
Unify the header guard style and replace the inconsistent include guards
with #pragma once.
The #pragma once is widely and very well supported in all compilers that
BIND 9 supports, and #pragma once was already in use in several new or
refactored headers.
Using simpler method will also allow us to automate header guard checks
as this is simpler to programatically check.
For reference, here are the reasons for the change taken from
Wikipedia[1]:
> In the C and C++ programming languages, #pragma once is a non-standard
> but widely supported preprocessor directive designed to cause the
> current source file to be included only once in a single compilation.
>
> Thus, #pragma once serves the same purpose as include guards, but with
> several advantages, including: less code, avoidance of name clashes,
> and sometimes improvement in compilation speed. On the other hand,
> #pragma once is not necessarily available in all compilers and its
> implementation is tricky and might not always be reliable.
1. https://en.wikipedia.org/wiki/Pragma_once
Remove the dynamic registration of result codes. Convert isc_result_t
from unsigned + #defines into 32-bit enum type in grand unified
<isc/result.h> header. Keep the existing values of the result codes
even at the expense of the description and identifier tables being
unnecessary large.
Additionally, add couple of:
switch (result) {
[...]
default:
break;
}
statements where compiler now complains about missing enum values in the
switch statement.
- Responses received by the dispatch are no longer sent to the caller
via a task event, but via a netmgr-style recv callback. the 'action'
parameter to dns_dispatch_addresponse() is now called 'response' and
is called directly from udp_recv() or tcp_recv() when a valid response
has been received.
- All references to isc_task and isc_taskmgr have been removed from
dispatch functions.
- All references to dns_dispatchevent_t have been removed and the type
has been deleted.
- Added a task to the resolver response context, to be used for fctx
events.
- When the caller cancels an operation, the response handler will be
called with ISC_R_CANCELED; it can abort immediately since the caller
will presumably have taken care of cleanup already.
- Cleaned up attach/detach in resquery and request.
Continuing the effort to move all uses of the isc_socket API into
dispatch.c, this commit removes the dns_tcpmsg module entirely, as
dispatch was its only caller, and moves the parts of its functionality
that were being used into the dispatch module.
This code will be removed when we switch to using netmgr TCPDNS.
- style cleanup
- removed NULL checks in places where they are not currently needed
- use isc_refcount for dispatch reference counting
- revised code flow for readability
- remove some #ifdefs that are no longer relevant
- remove unused struct members
- removed unnecessary function parameters
- use C99 struct initialization
This commit adds the ability to enable or disable stateless TLS
session resumption tickets (see RFC5077). Having this ability is
twofold.
Firstly, these tickets are encrypted by the server, and the algorithm
might be weaker than the algorithm negotiated during the TLS session
establishment (it is in general the case for TLSv1.2, but the generic
principle applies to TLSv1.3 as well, despite it having better ciphers
for session tickets). Thus, they might compromise Perfect Forward
Secrecy.
Secondly, disabling it might be necessary if the same TLS key/cert
pair is supposed to be used by multiple servers to achieve, e.g., load
balancing because the session ticket by default gets generated in
runtime, while to achieve successful session resumption ability, in
this case, would have required using a shared key.
The proper alternative to having the ability to disable stateless TLS
session resumption tickets is to implement a proper session tickets
key rollover mechanism so that key rotation might be performed
often (e.g. once an hour) to not compromise forward secrecy while
retaining the associated performance benefits. That is much more work,
though. On the other hand, having the ability to disable session
tickets allows having a deployable configuration right now in the
cases when either forward secrecy is wanted or sharing the TLS
key/cert pair between multiple servers is needed (or both).
This commit adds support for enforcing the preference of server
ciphers over the client ones. This way, the server attains control
over the ciphers priority and, thus, can choose more strong cyphers
when a client prioritises less strong ciphers over the more strong
ones, which is beneficial when trying to achieve Perfect Forward
Secrecy.
This commit adds support for setting TLS cipher list string in the
format specified in the OpenSSL
documentation (https://www.openssl.org/docs/man1.1.1/man1/ciphers.html).
The syntax of the cipher list is verified so that specifying the wrong
string will prevent the configuration from being loaded.
This commit adds support for loading DH-parameters (Diffie-Hellman
parameters) via the new "dhparam-file" option within "tls" clause. In
particular, Diffie-Hellman parameters are needed to enable the range
of forward-secrecy enabled cyphers for TLSv1.2, which are getting
silently disabled otherwise.
This commit adds the ability to specify allowed TLS protocols versions
within the "tls" clause. If an unsupported TLS protocol version is
specified in a file, the configuration file will not pass
verification.
Also, this commit adds strict checks for "tls" clauses verification,
in particular:
- it ensures that loading configuration files containing duplicated
"tls" clauses is not allowed;
- it ensures that loading configuration files containing "tls" clauses
missing "cert-file" or "key-file" is not allowed;
- it ensures that loading configuration files containing "tls" clauses
named as "ephemeral" or "none" is not allowed.
Previously, named would run with a configuration
where *-source-v6 (notify-source-v6, transfer-source-v6 and
query-source-v6) address and port could be simultaneously used for
listening. This is no longer true for BIND 9.16+ and the code that
would do interface adjustments would unexpectedly disable listening on
TCP for such interfaces.
This commit removes the code that would adjust listening interfaces
for addresses/ports configured in *-source-v6 option.
The additional processing method has been expanded to take the
owner name of the record, as HTTPS and SVBC need it to process "."
in service form.
The additional section callback can now return the RRset that was
added. We use this when adding CNAMEs. Previously, the recursion
would stop if it detected that a record you added already exists. With
CNAMEs this rule doesn't work, as you ultimately care about the RRset
at the target of the CNAME and not the presence of the CNAME itself.
Returning the record allows the caller to restart with the target
name. As CNAMEs can form loops, loop protection was added.
As HTTPS and SVBC can produce infinite chains, we prevent this by
tracking recursion depth and stopping if we go too deep.
This commit makes number of concurrent HTTP/2 streams per connection
configurable as a mean to fight DDoS attacks. As soon as the limit is
reached, BIND terminates the whole session.
The commit adds a global configuration
option (http-streams-per-connection) which can be overridden in an
http <name> {...} statement like follows:
http local-http-server {
...
streams-per-connection 100;
...
};
For now the default value is 100, which should be enough (e.g. NGINX
uses 128, but it is a full-featured WEB-server). When using lower
numbers (e.g. ~70), it is possible to hit the limit with
e.g. flamethrower.
This commit adds support for http-listener-clients global options as
well as ability to override the default in an HTTP server description,
like:
http local-http-server {
...
listener-clients 100;
...
};
This way we have ability to specify per-listener active connections
quota globally and then override it when required. This is exactly
what AT&T requested us: they wanted a functionality to specify quota
globally and then override it for specific IPs. This change
functionality makes such a configuration possible.
It makes sense: for example, one could have different quotas for
internal and external clients. Or, for example, one could use BIND's
internal ability to serve encrypted DoH with some sane quota value for
internal clients, while having un-encrypted DoH listener without quota
to put BIND behind a load balancer doing TLS offloading for external
clients.
Moreover, the code no more shares the quota with TCP, which makes
little sense anyway (see tcp-clients option), because of the nature of
interaction of DoH clients: they tend to keep idle opened connections
for longer periods of time, preventing the TCP and TLS client from
being served. Thus, the need to have a separate, generally larger,
quota for them.
Also, the change makes any option within "http <name> { ... };"
statement optional, making it easier to override only required default
options.
By default, the DoH connections are limited to 300 per listener. I
hope that it is a good initial guesstimate.
The isc/platform.h header was left empty which things either already
moved to config.h or to appropriate headers. This is just the final
cleanup commit.
The Windows support has been completely removed from the source tree
and BIND 9 now no longer supports native compilation on Windows.
We might consider reviewing mingw-w64 port if contributed by external
party, but no development efforts will be put into making BIND 9 compile
and run on Windows again.
when a serve-stale answer has been sent, the client continues waiting
for a proper answer. if a final completion event for the client does
arrive, it can just be cleaned up without sending a response, similar
to a canceled fetch.
Previously, as a way of reducing the contention between threads a
clientmgr object would be created for each interface/IP address.
We tasks being more strictly bound to netmgr workers, this is no longer
needed and we can just create clientmgr object per worker queue (ncpus).
Each clientmgr object than would have a single task and single memory
context.
The number of memory contexts created in the clientmgr was enormous. It
could easily create thousands of memory contexts because the formula was:
nprotocols * ncpus * ninterfaces * CLIENT_NMCTXS_PERCPU (8)
The original goal was to reduce the contention when allocating the
memory, but after a while nobody noticed that the amount of memory
context allocated would not reduce contention at all.
This commit removes the whole mctxpool and just uses the mctx from
clientmgr as the contention will be reduced directly in the allocator.
The stale-answer-client-timeout feature introduced a dependancy on
when a client may be detached from the handle. The dboption
DNS_DBFIND_STALEONLY was reused to track this attribute. This overloads
the meaning of this database option, and actually introduced a bug
because the option was checked in other places. In particular, in
'ns_query_done()' there is a check for 'RECURSING(qctx->client) &&
(!QUERY_STALEONLY(&qctx->client->query) || ...' and the condition is
satisfied because recursion has not completed yet and
DNS_DBFIND_STALEONLY is already cleared by that time (in
query_lookup()), because we found a useful answer and we should detach
the client from the handle after sending the response.
Add a new boolean to the client structure to keep track of client
detach from handle is allowed or not. It is only disallowed if we are
in a staleonly lookup and we didn't found a useful answer.
This commit completes the support for DNS-over-HTTP(S) built on top of
nghttp2 and plugs it into the BIND. Support for both GET and POST
requests is present, as required by RFC8484.
Both encrypted (via TLS) and unencrypted HTTP/2 connections are
supported. The latter are mostly there for debugging/troubleshooting
purposes and for the means of encryption offloading to third-party
software (as might be desirable in some environments to simplify TLS
certificates management).
This commit allows stale RRset to be used (if available) for responding
a query, before an attempt to refresh an expired, or otherwise resolve
an unavailable RRset in cache is made.
For that to work, a value of zero must be specified for
stale-answer-client-timeout statement.
To better understand the logic implemented, there are three flags being
used during database lookup and other parts of code that must be
understood:
. DNS_DBFIND_STALEOK: This flag is set when BIND fails to refresh a
RRset due to timeout (resolver-query-timeout), its intent is to
try to look for stale data in cache as a fallback, but only if
stale answers are enabled in configuration.
This flag is also used to activate stale-refresh-time window, since it
is the only way the database knows that a resolution has failed.
. DNS_DBFIND_STALEENABLED: This flag is used as a hint to the database
that it may use stale data. It is always set during query lookup if
stale answers are enabled, but only effectively used during
stale-refresh-time window. Also during this window, the resolver will
not try to resolve the query, in other words no attempt to refresh the
data in cache is made when the stale-refresh-time window is active.
. DNS_DBFIND_STALEONLY: This new introduced flag is used when we want
stale data from the database, but not due to a failure in resolution,
it also doesn't require stale-refresh-time window timer to be active.
As long as there is a stale RRset available, it should be returned.
It is mainly used in two situations:
1. When stale-answer-client-timeout timer is triggered: in that case
we want to know if there is stale data available to answer the
client.
2. When stale-answer-client-timeout value is set to zero: in that
case, we also want to know if there is some stale RRset available
to promptly answer the client.
We must also discern between three situations that may happen when
resolving a query after the addition of stale-answer-client-timeout
statement, and how to handle them:
1. Are we running query_lookup() due to stale-answer-client-timeout
timer being triggered?
In this case, we look for stale data, making use of
DNS_DBFIND_STALEONLY flag. If a stale RRset is available then
respond the client with the data found, mark this query as
answered (query attribute NS_QUERYATTR_ANSWERED), so when the
fetch completes the client won't be answered twice.
We must also take care of not detaching from the client, as a
fetch will still be running in background, this is handled by the
following snippet:
if (!QUERY_STALEONLY(&client->query)) {
isc_nmhandle_detach(&client->reqhandle);
}
Which basically tests if DNS_DBFIND_STALEONLY flag is set, which
means we are here due to a stale-answer-client-timeout timer
expiration.
2. Are we running query_lookup() due to resolver-query-timeout being
triggered?
In this case, DNS_DBFIND_STALEOK flag will be set and an attempt
to look for stale data will be made.
As already explained, this flag is algo used to activate
stale-refresh-time window, as it means that we failed to refresh
a RRset due to timeout.
It is ok in this situation to detach from the client, as the
fetch is already completed.
3. Are we running query_lookup() during the first time, looking for
a RRset in cache and stale-answer-client-timeout value is set to
zero?
In this case, if stale answers are enabled (probably), we must do
an initial database lookup with DNS_DBFIND_STALEONLY flag set, to
indicate to the database that we want stale data.
If we find an active RRset, proceed as normal, answer the client
and the query is done.
If we find a stale RRset we respond to the client and mark the
query as answered, but don't detach from the client yet as an
attempt in refreshing the RRset will still be made by means of
the new introduced function 'query_resolve'.
If no active or stale RRset is available, begin resolution as
usual.
The general logic behind the addition of this new feature works as
folows:
When a client query arrives, the basic path (query.c / ns_query_recurse)
was to create a fetch, waiting for completion in fetch_callback.
With the introduction of stale-answer-client-timeout, a new event of
type DNS_EVENT_TRYSTALE may invoke fetch_callback, whenever stale
answers are enabled and the fetch took longer than
stale-answer-client-timeout to complete.
When an event of type DNS_EVENT_TRYSTALE triggers fetch_callback, we
must ensure that the folowing happens:
1. Setup a new query context with the sole purpose of looking up for
stale RRset only data, for that matters a new flag was added
'DNS_DBFIND_STALEONLY' used in database lookups.
. If a stale RRset is found, mark the original client query as
answered (with a new query attribute named NS_QUERYATTR_ANSWERED),
so when the fetch completion event is received later, we avoid
answering the client twice.
. If a stale RRset is not found, cleanup and wait for the normal
fetch completion event.
2. In ns_query_done, we must change this part:
/*
* If we're recursing then just return; the query will
* resume when recursion ends.
*/
if (RECURSING(qctx->client)) {
return (qctx->result);
}
To this:
if (RECURSING(qctx->client) && !QUERY_STALEONLY(qctx->client)) {
return (qctx->result);
}
Otherwise we would not proceed to answer the client if it happened
that a stale answer was found when looking up for stale only data.
When an event of type DNS_EVENT_FETCHDONE triggers fetch_callback, we
proceed as before, resuming query, updating stats, etc, but a few
exceptions had to be added, most important of which are two:
1. Before answering the client (ns_client_send), check if the query
wasn't already answered before.
2. Before detaching a client, e.g.
isc_nmhandle_detach(&client->reqhandle), ensure that this is the
fetch completion event, and not the one triggered due to
stale-answer-client-timeout, so a correct call would be:
if (!QUERY_STALEONLY(client)) {
isc_nmhandle_detach(&client->reqhandle);
}
Other than these notes, comments were added in code in attempt to make
these updates easier to follow.
* Following the example set in 634bdfb16d, the tlsdns netmgr
module now uses libuv and SSL primitives directly, rather than
opening a TLS socket which opens a TCP socket, as the previous
model was difficult to debug. Closes#2335.
* Remove the netmgr tls layer (we will have to re-add it for DoH)
* Add isc_tls API to wrap the OpenSSL SSL_CTX object into libisc
library; move the OpenSSL initialization/deinitialization from dstapi
needed for OpenSSL 1.0.x to the isc_tls_{initialize,destroy}()
* Add couple of new shims needed for OpenSSL 1.0.x
* When LibreSSL is used, require at least version 2.7.0 that
has the best OpenSSL 1.1.x compatibility and auto init/deinit
* Enforce OpenSSL 1.1.x usage on Windows
* Added a TLSDNS unit test and implemented a simple TLSDNS echo
server and client.
previously query plugins were strictly synchrounous - the query
process would be interrupted at some point, data would be looked
up or a change would be made, and then the query processing would
resume immediately.
this commit enables query plugins to initiate asynchronous processes
and resume on a completion event, as with recursion.
Parse the configuration of tls objects into SSL_CTX* objects. Listen on
DoT if 'tls' option is setup in listen-on directive. Use DoT/DoH ports
for DoT/DoH.
As the query_prefetch() or query_rpzfetch() could be called during
"regular" fetch, we need to introduce separate storage for attaching
the nmhandle during prefetching the records. The query_prefetch()
and query_rpzfetch() are guarded for re-entrance by .query.prefetch
member of ns_client_t, so we can reuse the same .prefetchhandle for
both.
Attaching and detaching handle pointers will make it easier to
determine where and why reference counting errors have occurred.
A handle needs to be referenced more than once when multiple
asynchronous operations are in flight, so callers must now maintain
multiple handle pointers for each pending operation. For example,
ns_client objects now contain:
- reqhandle: held while waiting for a request callback (query,
notify, update)
- sendhandle: held while waiting for a send callback
- fetchhandle: held while waiting for a recursive fetch to
complete
- updatehandle: held while waiting for an update-forwarding
task to complete
control channel connection objects now contain:
- readhandle: held while waiting for a read callback
- sendhandle: held while waiting for a send callback
- cmdhandle: held while an rndc command is running
httpd connections contain:
- readhandle: held while waiting for a read callback
- sendhandle: held while waiting for a send callback
The basic scenario for the problem was that in the process of
resolving a query, if any rrset was eligible for prefetching, then it
would trigger a call to query_prefetch(), this call would run in
parallel to the normal query processing.
The problem arises due to the fact that both query_prefetch(), and,
in the original thread, a call to ns_query_recurse(), try to attach
to the recursionquota, but recursing client stats counter is only
incremented if ns_query_recurse() attachs to it first.
Conversely, if fetch_callback() is called before prefetch_done(),
it would not only detach from recursionquota, but also decrement
the stats counter, if query_prefetch() attached to te quota first
that would result in a decrement not matched by an increment, as
expected.
To solve this issue an atomic bool was added, it is set once in
ns_query_recurse(), allowing fetch_callback() to check for it
and decrement stats accordingly.
For a more compreensive explanation check the thread comment below:
https://gitlab.isc.org/isc-projects/bind9/-/issues/1719#note_145857
the blackhole ACL was accidentally disabled with respect to client
queries during the netmgr conversion.
in order to make this work for TCP, it was necessary to add a return
code to the accept callback functions passed to isc_nm_listentcp() and
isc_nm_listentcpdns().
NS_CLIENT_TCP_BUFFER_SIZE was 2 byte too large following the
move to netmgr add associated changes to lib/ns/client.c and
as a result an INSIST could be trigger if the DNS message being
constructed had a checkpoint stage that fell in those two extra
bytes. Adjusted NS_CLIENT_TCP_BUFFER_SIZE and cleaned up
client_allocsendbuf now that the previously reserved 2 bytes
are no longer used.
The rewrite of BIND 9 build system is a large work and cannot be reasonable
split into separate merge requests. Addition of the automake has a positive
effect on the readability and maintainability of the build system as it is more
declarative, it allows conditional and we are able to drop all of the custom
make code that BIND 9 developed over the years to overcome the deficiencies of
autoconf + custom Makefile.in files.
This squashed commit contains following changes:
- conversion (or rather fresh rewrite) of all Makefile.in files to Makefile.am
by using automake
- the libtool is now properly integrated with automake (the way we used it
was rather hackish as the only official way how to use libtool is via
automake
- the dynamic module loading was rewritten from a custom patchwork to libtool's
libltdl (which includes the patchwork to support module loading on different
systems internally)
- conversion of the unit test executor from kyua to automake parallel driver
- conversion of the system test executor from custom make/shell to automake
parallel driver
- The GSSAPI has been refactored, the custom SPNEGO on the basis that
all major KRB5/GSSAPI (mit-krb5, heimdal and Windows) implementations
support SPNEGO mechanism.
- The various defunct tests from bin/tests have been removed:
bin/tests/optional and bin/tests/pkcs11
- The text files generated from the MD files have been removed, the
MarkDown has been designed to be readable by both humans and computers
- The xsl header is now generated by a simple sed command instead of
perl helper
- The <irs/platform.h> header has been removed
- cleanups of configure.ac script to make it more simpler, addition of multiple
macros (there's still work to be done though)
- the tarball can now be prepared with `make dist`
- the system tests are partially able to run in oot build
Here's a list of unfinished work that needs to be completed in subsequent merge
requests:
- `make distcheck` doesn't yet work (because of system tests oot run is not yet
finished)
- documentation is not yet built, there's a different merge request with docbook
to sphinx-build rst conversion that needs to be rebased and adapted on top of
the automake
- msvc build is non functional yet and we need to decide whether we will just
cross-compile bind9 using mingw-w64 or fix the msvc build
- contributed dlz modules are not included neither in the autoconf nor automake
After the network manager rewrite, tcp-higwater stats was only being
updated when a valid DNS query was received over tcp.
It turns out tcp-quota is updated right after a tcp connection is
accepted, before any data is read, so in the event that some client
connect but don't send a valid query, it wouldn't be taken into
account to update tcp-highwater stats, that is wrong.
This commit fix tcp-highwater to update its stats whenever a tcp connection
is established, independent of what happens after (timeout/invalid
request, etc).
- restore support for tcp-initial-timeout, tcp-idle-timeout,
tcp-keepalive-timeout and tcp-advertised-timeout configuration
options, which were ineffective previously.
- ns__client_request() is now called by netmgr with an isc_nmhandle_t
parameter. The handle can then be permanently associated with an
ns_client object.
- The task manager is paused so that isc_task events that may be
triggred during client processing will not fire until after the netmgr is
finished with it. Before any asynchronous event, the client MUST
call isc_nmhandle_ref(client->handle), to prevent the client from
being reset and reused while waiting for an event to process. When
the asynchronous event is complete, isc_nmhandle_unref(client->handle)
must be called to ensure the handle can be reused later.
- reference counting of client objects is now handled in the nmhandle
object. when the handle references drop to zero, the client's "reset"
callback is used to free temporary resources and reiniialize it,
whereupon the handle (and associated client) is placed in the
"inactive handles" queue. when the sysstem is shutdown and the
handles are cleaned up, the client's "put" callback is called to free
all remaining resources.
- because client allocation is no longer handled in the same way,
the '-T clienttest' option has now been removed and is no longer
used by any system tests.
- the unit tests require wrapping the isc_nmhandle_unref() function;
when LD_WRAP is supported, that is used. otherwise we link a
libwrap.so interposer library and use that.
The double-locked queue implementation is still currently in use
in ns_client, but will be replaced by a fetch-and-add array queue.
This commit moves it from queue.h to list.h so that queue.h can be
used for the new data structure, and clean up dependencies between
list.h and types.h. Later, when the ISC_QUEUE is no longer is use,
it will be removed completely.
This variable will report the maximum number of simultaneous tcp clients
that BIND has served while running.
It can be verified by running rndc status, then inspect "tcp high-water:
count", or by generating statistics file, rndc stats, then inspect the
line with "TCP connection high-water" text.
The tcp-highwater variable is atomically updated based on an existing
tcp-quota system handled in ns/client.c.
This commit changes the BIND cookie algorithms to match
draft-sury-toorop-dnsop-server-cookies-00. Namely, it changes the Client Cookie
algorithm to use SipHash 2-4, adds the new Server Cookie algorithm using SipHash
2-4, and changes the default for the Server Cookie algorithm to be siphash24.
Add siphash24 cookie algorithm, and make it keep legacy aes as
- if the TCP quota has been exceeded but there are no clients listening
for new connections on the interface, we can now force attachment to the
quota using isc_quota_force(), instead of carrying on with the quota not
attached.
- the TCP client quota is now referenced via a reference-counted
'ns_tcpconn' object, one of which is created whenever a client begins
listening for new connections, and attached to by members of that
client's pipeline group. when the last reference to the tcpconn
object is detached, it is freed and the TCP quota slot is released.
- reduce code duplication by adding mark_tcp_active() function
- convert counters to stdatomic
(cherry picked from commit a8dd133d270873b736c1be9bf50ebaa074f5b38f)
(cherry picked from commit 4a8fc979c4)
- ensure that tcpactive is cleaned up correctly when accept() fails.
- set 'client->tcpattached' when the client is attached to the tcpquota.
carry this value on to new clients sharing the same pipeline group.
don't call isc_quota_detach() on the tcpquota unless tcpattached is
set. this way clients that were allowed to accept TCP connections
despite being over quota (and therefore, were never attached to the
quota) will not inadvertently detach from it and mess up the
accounting.
- simplify the code for tcpquota disconnection by using a new function
tcpquota_disconnect().
- before deciding whether to reject a new connection due to quota
exhaustion, check to see whether there are at least two active
clients. previously, this was "at least one", but that could be
insufficient if there was one other client in READING state (waiting
for messages on an open connection) but none in READY (listening
for new connections).
- before deciding whether a TCP client object can to go inactive, we
must ensure there are enough other clients to maintain service
afterward -- both accepting new connections and reading/processing new
queries. A TCP client can't shut down unless at least one
client is accepting new connections and (in the case of pipelined
clients) at least one additional client is waiting to read.
(cherry picked from commit 427a2fb4d17bc04ca3262f58a9dcf5c93fc6d33e)
(cherry picked from commit 0896841272)
Track pipeline groups using a shared reference counter
instead of a linked list.
(cherry picked from commit 31f392db20207a1b05d6286c3c56f76c8d69e574)
(cherry picked from commit 2211120222)
